Order of uploading Opening Balances and WIP

Hi Gurus,
In process of creating a fresh new system and have to upload the following Opening Balances and WIPs in SAP:
1. Stock Opening Balance
2. Trial Balance
3. Open POs
4. Open Sales Order
5. Business Partner Opening Balance
Can this data be uploaded in any order or there is priority required?
Thanks and Best Regards,
Kanu

Hi Kanu,
There is no fixed sequence. But my suggestion is to upload those which effect accounts.
1. Stock Opening Balance - Accounting Effect
2. Trial Balance - Accounting Effect
3. Open POs - No Accounting Effect
4. Open Sales Order - No Accounting Effect
5. Business Partner Opening Balance - Accounting Effect.
Usually from my experience it is found that Balancing accounts are not tallied i.e opening balance of accounts. Hence we upload those first and by the time it is tallied we upload the other balances.

Similar Messages

Upload opening balances for vendor and customer

Hi,
I am going live in 2 days. I want to upload opening balances. Please guide me how do i do it? not with LSMW.
Please give T code and guide me.
Its urgent!!!
Thank You
Pritam

you want to Uplode Transactional Data take care of that, beter to Prepare BDC,
for BDC you have to Record the Transaction Code and Tell ABAPer line items uplode process he will do the Technical Development,
Ex: F-22
01 - Customer A/C Dr 100
50 - Sales 100
you have to arrange data in your flat file like this,
Regards,
TML

Upload Opening balance of G/L accounts from legacy system to SAP, and also

Hi Gurus,
How to upload Opening balance of G/L accounts from legacy system to SAP, and also Vendor and Customer balance.
My Doubt is when you upload the customer balance and vendor balance will it effect the sundry debtor account and sundry creditor account if not the how will the sundry debtor account and sundry creditor account will be posted with the balance. Please send me the general entry passed for posting the same.
What I understood is that when we are uploading the customer and vendor balances through LSMW, no entry will be passed and it will update the customer and vendor sub ledger in FBL1N and FBL5N but it will not affect the sundry debtor account and sundry creditor account.
To give effect to sundry debtor account and sundry creditor account we need to manually pass a journal entry as follows.
1) Sundry debtors account A/c -
DR
      TO clearing account A/c
2)     clearing account A/c -
dr
     Sundry creditor account A/c
Please let me know whether iam correct
Also please tell me what will be the scenario for uploading of the assets balances through LSMW.
THANKS AND REGARDS
MV

Hi,
     When you uploading any data from legacy system to sap normally we will be using LSMW or BDC,thru this we will be uploading master data like G/L,vendor,Customer and asset master these are the some examples and we will upload transaction data also that is P&L Account and Balance sheet.When we do uploading data thru LSMW system will update all the values of vendor,customer and asset values as well as subsidary ledger also.No need to do manully.
Regards,
satya,
FICO

Opening balance and closing balances for discounts?

Hi all,
I have a typical sceanario where in
opening balance for discounts 10,000 (balance of last month)
actual discounts from the sales order 5,000
manual upload is from flat file 2,000
closing balance is 7,000 (which is opening balance + manual upload - actual discounts)
opening and closing balance needs to be calculated, how to calculate nor handle this on every month?
level of granularity of the data is
sku, month, rebate category and rebate amount?
Thanks

Hi Pooja,
can you please let us know few things about your report requirements
What is the extractor you are using?
What are the KFs ?
what are the selection parameters that you want to enter at the reporting level?
is it the report related to FI AR. do you want to display the values based on the customer -->profitcenter?
Bcoz we had a same requirement where our requirement was global recievables aging report in which the report need to display opening bal, sales,adjustment,colelction and closing balance and the aging values.
here what we did is changed the modeling of the DSO and infocube.
we had used non-cumulative KF in order to calculate closing balance and from that derived opening balance and again create a new formula to get the closing balance.
if you can be specific with your requirement hope can help you with your report.

Opening Balances and Closing Balance of customer

Hi,
Does SAP provide any standard customer account statement for Opening Balances and Closing Balance for specific date range have given in selection screen?
The statement also contains reference number, order, and Delivery number.
Note: FBL5N Transaction code will not sufficient for the requirement, so looking for any other transaction code / report provided by SAP already for it.
Thanks in advance,
Shwetha

Hi,
There are several standard reports which could be easily accessed through the menu (Accounts Receivable - Information systems). If none of these reports does not suit your requirement, you have to develop your own.
Regards,
Eli

Opening Balance and closing Balance - Crystal Report

Hi,
We have a report with account number, date , opening balance , closing balance and transaction amount. we had grouped the report by account. User will run the report with set of date range and we need to find the minimum date to find the opening balance and maximum date to find the closing balance and display them in the account group header for each account.
WhilePrintingRecords;
NumberVar CBal;
If {Command.VALUEDATE}= Maximum({Command.VALUEDATE}) then
CBal= {Command.CLOSINGBALANCE};
+CBal;
It is showing the closing balance and opening balance in the account group footer. but we could not able to show in the account group header.
Regards,
Sreeni

The easiest way to do this is NOT use variables.
Sort the data in date order ascending.
Then simple place the date field in Group header, details and footer.
Header will now show first date and Footer last date.
Ian

Uploading Opening Balances

Dear Experts,
Is there a way we can upload opening balances for BP, GL and Inventory.
Where can we find the setup program for Data Transfer Workbench

Hello Ahmed,
1 . Request you to go through the below PDF document: Page No. 10 -16.
http://service.sap.com/~sapidb/011000358700002763252005E.pdf
2. The setup software for DTW will be avialable in SAP Business One installation CD/ Patch Download:
Check for Packages directory -> Data Transfer Workbench -> Setup.exe.
For more information browse the DTW landing page at the below URL:
http://service.sap.com/~sapidb/011000358700002916332005
Hope this helps you.
Best Regards
Satish

Opening Balance and closing balance

Dear All,
Can i create a calculated field for ledger opening balance and closing balance. we are using epicor. I dont know the exact table which captures opening balance and closing balance, where as i got credit balances and debit balances for the segments, i could not find opening and closing balances in this table. table name is GLjrntdtl . Any ideas on this subject please.
Thanks & Regards,
Akram

hi Akram,
this is a question that you may wish to ask at the epicor forums
-jamie

RG1 register opening balance and closing balance updation

Hi All,
We are using the RG1 register recently i.e. after the Functional Upgrade (ECC 6.0). While executing J2I6 RG1 Excel report, opening balance and closing balance is not appearing in the report even though we have done the J1I5 extraction.
Is it mandatory to update the J_2IRG1BAL table with zero stock as and when the new material codes are created.
Regards,
Praveen

HI
Yes it is mandatory to update the table J_2IRG1BAL with material form and opening stock etc. for all the new materials
EXGRP: Excise group of the material
DATUM: Date from which you want RG1 report i.e. 01.01.2004
MATNR: Material
FORM: P for packed, L for loose. note that the same material cannot be maintained as both packed and loose.
WERKS: Leave it blank
Maintain all relevant opening balance fields. These fields start with OP
Note 951955 - CIN: General clarifications for RG1 goods*
check the above note
regards
Prashanth

REGARDING OPENING BALANCE AND CLOSING BALANCE

Hi, All
After executing the TCode - FBL3N, we get the details list. There we also need to display the OPENING BALANCE AND CLOSING BALANCE according to G/L Account and Company Code.

Hi
For opening balance, please use transaction F.01.
Then go to special evaluations and choose balance sheet type 4 (opening balance)
Kind regards
JeVe

Opening balance and closing balance on Receivables Customer Statement repor

I need an opening balance and closing balance of the customer statement in one report. Currently I developed a custom Customer statement report in report builder 6i. I developed a custom procedure to retrieve the previous statement balance. I’m able to successfully retrieve ending balance statement with sysdate but if I go back to previous date or previous statement date then I’m not getting the right ending balance of the report.
Even the seeded api arp_customer_aging provides the ending balance for sysdate but not for previous dates because this api always looks back to amount due remaining column(ar_payment_schedules_all).
Did any one ever develop a custom logic to get previous balance and ending balance on one single customer statement?

Hi,
I am working on the same logic. My program loads opening and closing balance and a list of items everyday. The GL_balances table gives you current balance but if you want the previous balance, you have to use : "gl_daily_balances" table and provide accounting_date for which you want the balance.
Hope this Helps!
Yogini

Opening balance and closing stock balance

Hi,
What is the way to calculate opening balance and closing stock balance.
Thanks
krishna

have a look Calculate Opening and Closing Stock
Opening and closing balance
Opening Stock and Closing Stock fields and Calculation

Importing G/L Accounts,B/P opening balance and Stock opening bal throughDTW

Hi All
I want to import following through DTW:
1. G/L account opening balance
2. BP opening balance
3. Stock opening balance
Please suggest me name of templates with examples
Please dont post the links of the threads related to my question. I know there are already many threads posted for this question but im confused with it because every thread suggests diffrent templates.
Simply tell me the name of thread used for these 3 opening balance and with examples of fields used in template.
ThankS
Edited by: Malhotra Saurabh on Apr 7, 2010 5:54 AM

Malhoutra,
Using a JE template is almost the same as using a document template (you will have to use service typre documents). The document will create a JE.
The difference is that it allows you to create the actual document types which make up the BP balance, so the team will be able to see each open invoice and credit note separately. This helps when reconciling future payment receipts and providing good aging reports.
You can achieve the same by creating a line for each document in your journal lines template.
You will need to use documents for items as you are bringing in quantity and values which cannot be done with journals. If you are managing item cost by warehouse, you will need a document line with quantity and cost in each warehouse for each item. Using the inventory general entry template will set the item cost properly in the system in the Master data when processing new transactions.
Gordon is correct, there are many ways to achieve what is required, each partner will use what they are used to and know will work for the customer - as each customer is different too.

Fbl3n heading we need to adde opening balance and date

Hi guru's
My requirement is adding fields opening balance and date in fbl3n (g/l account line item display)
please guide me.

Hi,
Use Business Transaction Events(Tcode FIBF) to populate custom fields in FBL*N transactions.
Regards,
Madhu

Opening balance and changes

Hi all,
For reporting purpose, I need to populate data for opening balance and the changes for all the balance sheet items after consolidation. I believe we can do this by using movement type as an indicator.
My problem now is for the data extracted from ECC. Beside Asset accounts, will the other accounts (liabilities & equities) populate the transaction type in FAGLFLEXT such as (opening, addition, reduction)??
Regards,
Shahrul

Only acounts where the field status requires transaction type in ECC will be available for BCS. This may be any account, but depends on field staus setting, which may be changed to met BCS requirements.
In many cases, the balance carry forward from year-to-year will cause the movement type or transaction type to be reset to have a new beginning balance. This is determined by the master data for movement types and/or transaction types.
Beginning balances in period zero, are however a different story. These are not typically loaded from ECC, but are carried forward from the previous year. In this case, the opening balances are typically loaded in the last period of the previous year and the balance carry forward task is subsequently executed in period 1 of the new year to populate period 000 opening balances.

Order of uploading Opening Balances and WIP

Similar Messages

Maybe you are looking for