Order operation change

Hi,
I must modify order operation.
Have you a sample program with function 'IBAPI_ORDER_OPERATION_CHANGE'?
Thanx in advance.
CV

Cristiano,
Can you explain how did you add new operations into orders?
Thanks.

Similar Messages

Mass change of Production orders operations in ECC 6.0 using COOIS

Dear experts,
Kindly Suggest a way to mass change of direct operations and components overview screen of production orders in ECC6.0
using COOIS transaction code which was available in SAP 4.7 using environment >change order> operations or components once we execute the COOIS with certain input parameters in the out put screen,this function seems to be not available in ECC 6.0 , if available kindly guide me or any alternative way to perform the same.
Thanks in advance for your inputs and help..
Best regards,
Nitish jain

You have that button "Change Order" you can just click on it and once you're in the change mode of the order click "Component Overview" button , it's the same number of clicks...
Anyway, SAP has changed the entire ALV for all the transaction codes using PPIO_ENTRY (COOIS, CO26, CO27, CO28 et al)
look at question 12
https://service.sap.com/sap/support/notes/540779
if you really want your old GUI status. there is a way to get it back. In SE38 enter the program name PPIO_ENTRY and select variants and click display. Once you're in variants screen enter variant name and click create and select all "screens" check box and then it will take you the selection screen in there check the box "Old ALV Display" in the Technical settings sub screen. (If you want you can choose other functions also like "Selection List" as PPIOM000 Always display components directly etc. if you want ) Click on "Next Screen" button and it will show "Attributes" button then click on the attributes button and save it.
Now go to SE93, make a copy of transaction COOIS to ZOOIS and in the variant field enter the variant you just created. The new transaction will always start with the variant you just created and it will look like your old COOIS with Environment > Change Order > Components will be visible.
Edited by: Jeevan Sagar on Oct 20, 2011 9:50 AM

Maintenance order Operation mass change with Ehp5

Hi Experts,
We are currently working in ECC 6.0 Ehp3 and we are exploring the additional features with Ehp5.
To explore the Ehp5 functionalities (Maintenance order Operation Account Assignment and Operation mass change) we did the foloowing:
1. LOG_EAM_CI_2 to LOG_EAM_CI_5 and LOG_EAM_LINEAR_1 business function is activated
2. LOG_EAM_OLC: Operation Account Assignment business function is activated
3. Under Define Cost settings configuration, the relevant Plant and Order type checkbox is activated
4. The user role is adjusted to enable the Maintenance order Operation mass change functionality
Suppose the LOG_EAM_OLC business function is activated on 01.02.2012
The Maintenance orders created before 01.02.2012 is allowed to do the Maintenance order Operation mass change.
But the Maintenance orders created after 01.02.2012 is not allowing to do the Operation mass change and throwing the error message.
Error message: Operation Account Assignment orders (order type XX) are not supported
Program name: SAPLIBAPI_ALM_ORDER_PROCESSING
Message Class: ERP_CO_OLC_E (Messages for Operative Level Costing)
Message number: 066
I have reffered the supporting documents, but it didn't helped.
Please help me.
Thanks,
Raj

Hi,
I expect the issue is with BAPI_ALM_ORDER_MAINTAIN. The mass change functionality usues this BAPI but the BAPI does not currently support OLC orders. When you try to change OLC orders via the BAPI (or the mass change functionality tries to do it) this is prevented and the error message is issued.
At the moment, you will not be able to use mass change for OLC orders.
-Paul

Change Resources in a Process order operation

Hello
Is there any way to change a resource in a process order operation?, I have 5 machines, but sometimes I use the machine1 and machine2 to produce the material A, but if i dont have capacity to produce or if one machine is not working, I could use another machines. I know i could use products versions, but if I do thar, there will be a lot of convinations.
Thank you in advance.

Dear Saly,
as correctly said by Caetano in standard SAP the only tool to change work center in production orders is in leveling activity through CM21 (graphics or tabelar - CM21 , CM22).
In this strument (CM21) according to customizing setting in strategy profile (belonging to overall profile)
you can change resource through drag / drop method or (with special setting in strategy profile) insering manually a new resourse.
As alternative tool is possible to create a custom report and change work center using a BI custom using a filter tool present in the production order after go to operation details. Unfortunaltely in the standard SAP there isn't a bapi/fm (released by SAP) to change work center in production order.
Let me know if i've been useful for you.
Daniele

Changing Order Operations of Production Order

Hi Experts,
In Production order->operations->Maximum Wait time.I need to change this.can anybody help how to achive this.

Hi,
Follw this
1: CO02, (change production enter) enter
2: Operation Overview (F5)
3: You see list of operations, double click on operation number. Or selection operaion and click on operation details.
4: Select tab page Interop. times
5: You will see the field Max Wait time. and maintain.
6: Come back to header screen click on schedule (ctrl+F8) to reschedule the order with changes.
Pavan

Plant Maintenance Order - BADi/user exit for operation change

I need to send a mail on plant maintenance order (IW32) save event if there is any change in operation - requirement assignment person. Means if the operation is assigned to a person then notify that person on order save event.
Can anybody help me on this in finding some BADi or user exit?
Thanks in advance.

Hi,
User Exits:-
IWO10009 Customer Check for 'Save' Event
BAdI:-
ALM_ME_001_ORDER Order/Operation Data
ALM_ME_ORDER_OPER MAM 1.0 Order Operations
IBAPI_ALM_OPR_GETDET BADI for Reading Fields for BAPI_ALM_OPERATION_GET_DETAIL
Check with these User Exits & BAdI's.
regards,
Venkatesan Anandan

Changing Work Center in PM Order Operations

Hi PM Experts,
We got two companies operating in the same SAP client. But user are properly restricted with Authorizations in terms of company codes, maintenance panning plant, maintenance plants etc, etc,
But I noticed that in IW32, in work order operations users belonging on to one company can select(F4) work centers/maintenance plant from the other company and save orders.
I was under the impression that org level authorizations block this. Is there a way to stop this? provision of the the relevant authorization object in this regard will be a great help.
thanks in advance,
Cheers
Deepal

Hi
Please check the below link. may useful
[http://help.sap.com/saphelp_470/helpdata/fr/a5/3eca044ac011d1894e0000e829fbbd/content.htm|http://help.sap.com/saphelp_470/helpdata/fr/a5/3eca044ac011d1894e0000e829fbbd/content.htm]
Regards
Seenu

OPERATION CHANGE IN ORDER

Hello Experts,
I have an issue regarding process order.
If i add an operation while process order creation then will it get updated in recipe master table PLPO.
Or suggest me an table in which i can find this updated values of operations.
Thank you.
Regards,
Ashish
Moderator message:
Locked. Reason: improper use of capitals in subject line.
Please read rules of engagement before posting.
Edited by: Csaba Szommer on Feb 1, 2012 8:37 AM

HI
Check Table S022: SFIS: Order Operation Data for Work Center for order no AUFNR as input.
Regards
Anupam Sharma

Error message if invalid characters entered in PM order oper.short text fld

Hi ALL,
I need to display a error message, when user enters the invalid characters in work order operation short text field. The error message should be displayed during work order u201CSaveu201D (during creation and change mode).
Kindly let me know is there is any user exit / BADI can be used for this.
Note: I have checked some user exit, such as IWO10009 but I am not getting the value of Operation short text (AFVGD-LTXA1) to compare and throw the error message
Regards
Ramu

hi
the exit is correct but don't use structure field,
follow this to get text
get AUFPL(Routing number of operations in the order)from CAUFV and paa it in AFVC -AUFPLyou get the short text
it can be usefull
-ashok

Standard Report for missing parts at production order operation level?

Hi PP Gurus,
            We have standard report for missing parts at production orders level.
For our client, they need a report for missing parts analysis at production order operation level. Do we have any such standard report in the SAP?
Please help.
Thanks,
Reddy.

Hi Arvind,
      Thanks for for your response.
1. List: Components, Layout: Standard layout          set the Missing part
       It shows the component requirement/withdrawn quantity for each operation of production order. It is not showing the commit quantity.
2. List: Components, Layout: Pick list          set the Missing part
       It shows the component requirement/withdrawn quantity for each production order.
3. List: Components, Layout: Missing Parts List-Material View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
4. List: Components, Layout: Missing Parts List-Order View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
      We are unable to get the solution from all these 1 to 4 reports from COOIS.
Do we have any option to change the existing layout (ex: 3 ) to get the commit quantity for operation with missing parts indicator?
If avilable, what is the procedure to be followed?
Thanks,
Reddy.

PM Order Operations Default Unit of Measurement

Halo Experts,
We have a problem in UOM for PM/CS order operations. We have defined HR as default value of UOM for operations in IMG.
Business wants to change at the order level to H as UOM and it is manually keyed in and saved. But when we check with the F4 option for Unit of Measure " H" doesnt appear where as HR appears.
Any restrictions in displaying all the unit of measures. Can anybody clarify why "H" is not appearing on F4 option in the work order operation line items.
Regards,
Selva

Hi Rajesh,
We are getting the default unit in operation tab and all the config of default values is available but when we execute the F4 option the unit "H" is not appearing where as if we change from HR which is a default unit to H it is getting saved at the operation Tab.
Hope it is clear now.
Regards,
Selva

Re-release of PM order after change

Hello Gurus,
our PM consultant is telling me that once the maintenance order has been released it won't be triggered back for re-release if I apply changes to it. For example, I plan my work (internal hours and materials) and then release the PM order. Later I decide that I need more hours for this order. I increase the number of internal hours on this PM order and it looks like that the system does not ask me to release the order again.
If this is the case what would you recommend to control the changes on the PM order (by changing the existing operation or adding new operations)? What approach do you implement on your projects?
Many thanks in advance.

hi
you can use of permit ,create a permit with the controls of order release refuse if the permit is not issued.
create characterisic as the name specified in the IMG ,in the characteristic addtional tab specify the table as CSEVPERMIT and the field name as PKOSTEN ,assign the characteristic to the permit and specify the values for the class as say >Rs 10000.
then while creating the order if the plan cost is higher than Rs10000 then system will not release the order unless you have specified the permit to the order
regards
thyagarajan

Status not updated in JCDS Order Operations

Hello Experts,
I have a requirement in which if status changes (either system or user status ) for any operation of an order, I need a table which shows object number , the date of status change .
In JCDS , when i change some Order Operations status they are reflected into JCDS with their change dates and when i change some Order Operations status they are not reflected into JCDS.
In JEST we have only status values but not the change date , i need the status change date.
I checked so many tables but they don't Order operation status change date.
Can any share some light , are they are restrictions that certain order types operations only get reflected into JCDS.
Thanks
Vamsi

Hello All,
I have spoken to my functional team.
There is setting in SPRO or you can directly go to Tcde 'OIOE' and you have differnt plants and order types and you can set different flags accordingly the change pointers will be updated to JCDS.
From the next doument created after enabling this setting, the change documents are reflected in JCDS in our case.
Appreciate your help.
Thanks
vamsi

Process Order operation scheduling duration calculation

Hi
We have following formula has been maintained for processing time calculation in resource.
Machine * ( Operation quantity / Base quantity / Operation splits ) + Setup + Change-over
As per above formula for following procee order qty and time, SAP caulates time.
Opeartion qty - 100,
Base qty - 100,
Op split - 1
Machine - 0.5 hrs (30 Mins)
Processing time calculated as 30 mins (.5hrs)
When I schedule the process order with same resource for same qty and machine time, processing time is calculated as 33 mins. We dont have maintained any floats in scheduling margin key in material master. We dont have any wait times also.
Can you please let us know why process order operation is having 3 mins tolerance? Any idea where such settings has been maintained?
Any pointers will be helpful.
Edited by: nilesh sankpal on Dec 8, 2011 5:47 AM

Hi Mangalraj,
Thanks for your reply.
We have not maintained ay reduction levels in OPUZ for plant and order type combination.
In resource, we have 2 hrs break time and total operating time is 18.50 hrs.
I got following SAP help link for calculation of duration for processing time.
http://help.sap.com/saphelp_46c/helpdata/en/b1/c04387439a11d189410000e829fbbd/content.htm
Is processing time is calculated based on following formula.
Processing time u2013 Calculated Processing time * (1+ (Length of break / Operating time)
Can you please correct my understanding here?
Thanks in advance.
Nilesh

Use of field 'StartPoint' in work order operation's 'Dates' tab

Hi,
Can someone please explain me on the uase of field 'StartPoint' on work order operation's Dates tab.
Regards.

Start point will be used in case of scheduling for the operation.
By mentioning the condition & date, while doing automatic scheduling, system will change the start date of the operation & correspondingly finish date.
Note: This will work only when Automatic scheduling is ticked for the control key.
Regards,

Order operation change

Similar Messages

Maybe you are looking for