Order probability in quotation

Hello,
Has anyone worked with Probability in % of a quotation leading into a sales order?
On the item category (AGN for example) you can predefine a percentage for order probability.
The help text reads:
"When you enter a value, the sales probability is proposed from the item category.
The sales probability can, however, can constantly be changed manually in the quotation."
In the quotation the probability is grayed out, so I can't change it. Any suggestions?
Kind regards,
Johan Wigert

I posted this message to OSS and they created the following note:
1321021 - probability in quotation item is unchangeble in CRM WebUI

Similar Messages

  • Quotation - Order Probability

    Can anyone advise below?
    While using order probability and TOR in quotation, i noticed the qty transferred to MD04 might not be a round figure.  How can i round up/down this requirement qty in MD04?
    Thanks
    Peter

    Hi
    Please change the order probability in the document to 100% and try. Create another document and before saving change the probability to 100%.
    Thanks,
    Ravi

  • Customization of  Order Probability % in Product Tab (AG)

    Hi,
    Client wants to add some Order probability percentages for Quotation.
    we get this field end of the product fields in quotation.
    Predefined percentage 100 only is there in the system but client wants to add some more  % like (10,20 ......etc) Where can do this customization
    Can any one help me to implement this
    Thanks
    Gskumar

    Hi
    You really dont need to configure it somewhere.
    The desired order probability can be manually entered when the document type is configured. This can be done in teh transaction code VOV8 for the sales document type.
    NB; I am talking on the sales and distribution configuration and hope you are also talking about the same. If the CRM scenario is different from the SD scenario, please let me know. But pls check VOV8 and confirm this is what you are looking for.
    Reward if this helps

  • How can I create a single order from multiple quotations?

    How can I create a single order from multiple quotations that I have created by the transaction VA21 ?
    Thanks in advance for the answers.

    hi
    Go to transaction: /nva01
    Enter order type : ZOR
    Sale org :xxxx
    Dist.channel:xx
    Division :xx
    Press enter
    Click on “Sale document” and select Create with reference
    Then enter 1st quotation number & click on “COPY” or “Selection list”. Then click on “Copy “.Then all line items which belong to quoation1 copy to order.
    Then,
    Click on “Sale document” and select Create with reference
    Then enter 2nd quotation number & click on “COPY” or “Selection list”. Then click on “Copy “.Then all line items which belong to quoation2 copy to order.
    Then,
    Click on “Sale document” and select Create with reference
    Then enter 3rd quotation number & click on “COPY” or “Selection list”. Then click on “Copy “.Then all line items which belong to quoation3 copy to order.
    Now save the sale document.
    Kindly give reward points
    Edited by: WISH on Mar 19, 2008 2:25 PM

  • Error V2 005 when creating a sales order from a quotation

    I hope someone can come up with some ideas to help me with this error. My client is creating a sales order from a quotation and immediately on the first screen the error V2 005 pops up. The quotation was not created with reference to any previous document, and at this point not sold-to party has even been copied through to the sales order.
    To make this error more interesting, this is only happening with 1 particular customer.
    I have checked: credit management, customer hierarchies, material determination, customer info records and none of these are in use.
    Can someone please come up with some ideas?
    Thanks and regards
    Kikas

    Dear Sai,
    Thanks for this note I am going to try it, however I have some concerns because the issue is only happening in production, with 1 custoemr only, and QA is an updated copy of production and I could not replicate the error in QA using the same customer....
    If anyone has any other ideas please I would appreciate it
    thanks
    Kikas

  • Copy data directly from service order to sales quotation

    I know the process to create the sales quotation from service order in customer interaction center but my query is that is there a way that data should be directly copied from the service notification to the service order to the quotation because I have entered the data completly in the notification .Entring the data again and again make mistakes .
    THANKS
    AVANISH GULATEE
    M-08447307358

    look for the BADIS that get triggered when you save the notification. if you find any BADI, then you can create new implementation for it and you can write the code. you can use CRM_ORDER_MAINTAIN to create service order inside that new implementation.

  • Referencing Sales Order to a Quotation via BAPI

    Dear all,
    I encouter problems to reference a Sales Order to a Quotation when I try to use the SAP BAPI 'BAPI_SALESORDER_CREATEFROMDAT2'. Even though later when I managed to create the referencing on both the Sales Order Header and Sales Order Line to the Quotation, the system still doesn't closed the Quotation status as Completed. This has caused the Quotation remains active and open for other Sales Order for referencing. Any ideas?
    Thank you and regards;
    -ah tiang-

    Hi!
    According to OSS note 370988 it seems you can't create sales order properly with reference to quotation using BAPI_SALESORDER_CREATEFROMDAT2 in straight-forward way:
    Symptom
    This note describes the problems of the 'Create with reference' function when using BAPIs to create sales documents.
    If you are working online, you can use this function module to create a sales document with reference to an existing sales document or a billing document (for example, a debit or credit memo request) according to fixed rules. The rules for transferring information from the source document to the target document are defined in the copying control on header and item level. The creation with reference permits an item selection.
    When you use BAPIs in SD, a function of this type is not fully available. A reference is only possible for a quantity contract, so that the target quantity of the contract can be reduced by the order quantity of the sales document. Furthermore, the document flow is also updated.
    As an alternative to 'Create with reference' in Transaction VA01, two variants are provided for solving the 'Create with reference' problem in the BAPI.
    1. Create a '1:1 ' - that is, a document copy of a sales document (customer quotation, order) with 'BAPI_SALESDOCUMENT_COPY'. At this point, you cannot create the 1:1 copy of either a billing document or a delivery.
    2. Create a sales document that refers to an existing document with 'BAPISDORDER_GETDETAILEDLIST' and 'BAPI_SALESORDER_CREATEFROMDAT2'.
    Reason and Prerequisites
    As of yet, no method exists for creating a sales document that refers to an existing document.
    Solution
    For solution No. 1
    1. Create the documents using the BAPI_SALESDOCUMENT_COPY function module. However, this only permits a 1:1 copy without factoring out individual items.
    2. After you have created the document copy, you can use a change BAPI to edit this copy.
    For solution No. 2
    1. Collect the data for the reference document (for example a customer quotation) with the 'BAPISDORDER_GETDETAILEDLIST' function module. In the example code, focus exclusively on the partners, items, schedule lines and conditions.
    2. Prepare the Data. Execute the 'copying control' manually. This way, you decide which values are to be transferred.
    3. Create the sales document using the 'BAPI_SALESORDER_CREATEFROMDAT2' function module by transferring the prepared data.
    4. Finally, you must remove a COMMIT WORK so that the sales document can be written into the database.
    An example of solution 2 is attached as a text file. You are allowed to select items and quantities for example, if you use input parameters. If there are no entries, then transfer 1:1 from the reference document. When you enter the 'condition type' parameter, you can determine whether conditions are copied or recalculated ('G' for transferring from the preceding document; 'B' or ' ' for re-determining, and 'C' for re-determining with transfer of the manual elements).
    Hope it helps.
    And welcome here on SDN!
    Regards,
    Maxim.

  • How to create a Sales order from multiple quotations?

    Hi All,
    Please tell me how to create one sales order from multiple quotations?
    Regards,
    Maddy

    Hello Maddy,
    To create the sales order from multiple quotation, you should put the value "F - Only at item level: Always with selection option" under Quotation determination in your sales transaction type.
    It will give you a pop-up to choose your quotations item while creating the sales order.
    Some per-requisites are there:
    1. Copy control should be maintained between your quotation and sales order.
    2. Quotation should be error free and should have the status "Released"
    3. Sold to party and Organization should be same in both transaction.
    For more information you can check the below link:
    Processing Quotations - Sales Transactions - SAP Library
    Best Regards,
    Dinesh

  • Purchase order with RFQ (Quotation)...??

    Hi MM Gurus,
    How to create Automatic Purchase Order with RFQ(Quotation) ..
    is there any T-Code to create at a time around 50 quotations to 100 quotations.
    I dont want create every time through ME21N ( Document over view on )...
    Thanks in Advance,
    Anthyodaya.

    Hi
    Threr are stps. Pls follwo this.
    Automatic PO     Automatic Po
    Vijay

  • Purchase orders of a quotation

    Hai,
        I want to know purchase orders of a particular RFQ for a vendor.
    In EKKO, and EKPO we r getting both purchase orders and RFQ details, i want to know is there any field or to know the purchase order of a quotation.
    Thank you
    Regards
    Srinivas

    Hi Srinivas,
    I believe that as per your query, you are looking for History per Purchasing Document.
    you use this EKBE table to find out the History of your Purchasing Document like RFQ <> PO.
    Cheers
    Manoj K Singh

  • Order from Multiple Quotations

    Is it possible to create one order from multiple quotations. If yes, the how?
    Whenever i try to create an order with reference to quotation there is a pop-up window with provision to copy only one quotation. Can this be done in standard SAP functionality?
    Thanks,
    Raj.

    Hi,
    That is very much possible. Once you get into the Creation screen., you have to include the quotations using menu itself. It is in the first menu in the menu bar.
    Pls lemme know if you need help on this
    The menu path is
    Sales Document----Create with reference
    You have to do this as many number of times as the number of quotations you want to refer. You can see the items of those quotations getting reflected in the sales order.
    Hope this helps

  • Approval of Sales Order vs Sales Quotation

    Hi experts, How can I fire an approval when total of Sales Order is different from total of quotation base? I retrieved the total from quotation on a sales order user field , but I can't fire the approval.
    Thanks,

    Hi Rolando Arzamendia.
    Try this User Query for Sales Order vs Sales Quotation Approval.
    SELECT Distinct 'True'  FROM
    ORDR T0  INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN oqut T2 ON T1.BaseDocNum = T2.DocNum
    WHERE T2.DocTotal = $[ORDR.DocTotal]
    Thanks,
    Madhan.

  • Create sales order from multiple quotation

    Hi All,
    How we can create sales order from multiple quotation what is transaction code for this.
    Ahmed

    Hi Ahmed,
    There are two options.
    1. For creating Sales Order with ref to too many Quotations:
    Go to T. Code VA26 and enter the Doc Date or Quotation Valid to Date and Sold to party, Quotation Type to get all the outstanding Quotations for that particular Sold to Party. Then Select the required quotations and then select Follow-up actions button to create Single Sales Order.
    2. For less number of Quotations:
    You can simply go by referring each quotation by placing the cursor in alternate line item in sales order by selecting "Create with ref" button.
    Hope this will solve your problem.
    Ravi.

  • Planned order qty. based on usage probability in quotation

    Hi ,
    I created a quotation with 5 qty. and kept usage probability as 60%. I did the requirement transfer in MRP.In MD04 it generated a planned order of 5 qty. and quotation with 3 qty.
    Is there any setting so that system should generate planned order also with 3 qty. i.e. same qty that of quotation.
    Regds

    Hi,
    After the req. transfer from quotation to MRP, go to MD04 & check the qty which has been transferred, is it 5 or 3 ?
    If it is 3, then check in material master / info-rec if any min order qty / min. lot size is maintained. Also check the lot sizing procedure & safety stock if specified.
    Regards,
    Vivek

  • Creation of an ERP Sales Order or ERP Quotation from CRM Opportunity

    Hello Experts,
    The scenario is as follows:
    I have done the cross-system copy control of transaction types and item categories to enable ERP Quotation and ERP Sales Order creation from CRM Opportunity.  However, after saving the CRM Opportunity, when I click on the follow-up transaction and select ERP Quotation or ERP Sales Order from the list, the screen doesnt change and instead I got the following error:
    "Diagnosis
    An exception occurred during request processing. This was handled centrally. It changed the program flow and the result of the request probably contains errors.
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    Activate checkpoint group BSP_WD_EXCEPTION_DISPLAY. To do this, use transaction SAAB. If the error recurs, further details are displayed.
    Exception Details
    CX_BSP_WD_INCORRECT_IMPLEMENT - Define component usage 'CUERPFollowUp'
    Method: CL_BSP_WD_REPOSITORY=>GET_CMP_USAGE_DEF
    Source Text Row: 20"
    Experts, kindly help me understand what the error is about and pointers to resolve it.
    Points would be awarded.
    Thanks,
    VSK.
    Edited by: venkatskumar on Feb 21, 2011 8:37 PM

    Hello Robert,
    Thanks for the quick reply.
    I have followed your instructions and I wanted to confirm one more thing with you.
    When I enter the component usage it gave a pop-up which said:
    "Enter either a reference or an interface view"
    Any information on what should be entered in the reference or the interface view? What should be the used component name and interface view name in this scenario?
    Kindly confirm.
    Points awarded
    VSK.
    Edited by: venkatskumar on Feb 22, 2011 12:37 PM

Maybe you are looking for