Order quantity not being created from BAPI_SALESORDER_CREATEFROMDAT2

Hi Experts,
I am able to create the sales order but , quantity in the item is blank and ultimately no schedule line item is created even though i am passing the data into BAPI.
I tried some OSS notes and also tried some of the suggestions given in other threads but still not able to solve the issue.
Could sombody give an exact reason or solution for this proble.
Regards,
Praveen.

you can pass value X in below strctures
if not ORDER_ITEMS_IN-ITM_NUMBER is initial.
ORDER_ITEMS_INX-ITM_NUMBER = ITM_NUMBER.
endif.
like check your assing values and put the condtion.....
ORDER_ITEMS_INX = ORDER_ITEMS_IN1X
ORDER_SCHEDULES_INX = ORDER_SCHEDULES_IN1X

Similar Messages

Inbox folders not being created from msf files

Last week, I noticed that my Inbox folder files weren't appearing in my profile. I posted a generalized question here: https://support.mozilla.org/en-US/questions/996903
The response I received didn't help that much. The folder I created appeared on the remote mailbox as empty folders.
My mail account is synced via IMAP to a remote Zimbra mail client using STARTTLS. I can view my Inbox. The other folders in my Inbox account are not visible. I can send and recieve messages from my INBOX.
When I select "Manage folder Subscriptions" In the account options, I can see the folders. When I select them, and click the "Subscribe" button, nothing happens.
Inspecting my IMAP directory, I see the following structure:
~/.thunderbird/13zr0oo0.default/ImapMail/mail.<zimbra_account>.com:
-rw-r--r-- 1 matthewe matthewe 1238 May 2 10:38 Archives.msf
-rw-r--r-- 1 matthewe matthewe 1235 May 2 10:38 Drafts.msf
-rw------- 1 matthewe matthewe 47500385 May 2 09:56 INBOX
-rw-r--r-- 1 matthewe matthewe 375885 May 2 10:36 INBOX.msf
-rw-r--r-- 1 matthewe matthewe 25 May 2 08:58 msgFilterRules.dat
-rw-r--r-- 1 matthewe matthewe 1233 May 2 10:38 Sent.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 10:38 site-errors.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 09:59 Templates.msf
-rw-r--r-- 1 matthewe matthewe 2275 May 2 10:33 Trash.msf
The msf files are created when I click the "Subscribe" button but subsequent Mail files containing the mail data are not (note that non-msf files exist only for "INBOX".)
Removing .msf files and restarting Thunderbird has no affect.
When I launch, the errors console reports the following three errors:
"Could not read chrome manifest 'file:///usr/lib/thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
-- There is no chrome.manifest file in my filesystem under /usr/lib/thunderbird/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}"
"While creating services from category 'profile-after-change', could not create service for entry 'Disk Space Watcher Service', contract ID '@mozilla.org/toolkit/disk-space-watcher;1'"
This is reported as https://bugzilla.mozilla.org/show_bug.cgi?id=883621 and has been resolved at https://bugzilla.mozilla.org/show_bug.cgi?id=895964 but my system still throws the error. (I have plenty of disk space. Permissions perhaps?)
[JavaScript Warning: "Calendar https://mail.zimbrahostedemail.com/home/matthewe@<zimbra_client>.com/Calendar has a dangling E-Mail identity configured."]
I'm not sure what that means.
I am using Thunderbird 24.5.0 on Ubuntu 13.10

Is your question about files not being created, or because you cannot send and receive mail, or both?

"SUS Purchase Orders" are not being extracted from SRM to BW

I'm usign BW 7.0 with SRM 5.0 (EBP and SUS).
"SUS Purchase Orders" (BUS2230) are not being extracted from SRM to BW, only "Purchase Orders" (BUS2201). I'm using standard SRM extractor 0BBP_TD_PO.
Does anyone have experieced this? Is there any special configuration to extract "SUS Purchase Orders"?
Thanks in advance
Raphael Barboza

The only solution we were able to provide with the time constraint we had was to modify the standard extractor to consider the SUS PO code instead of the PO code.
Function module: BBP_BI_PO_EXTRACT
Replace line:
c_object_type TYPE bbp_object_type VALUE c_po, u201CBUS2201
With the line:
c_object_type TYPE bbp_object_type VALUE c_suspo, u201CBUS2230
It is not the most elegant solution, but it worked.
Hope it helps.

Iby_ext_party_pmt_mthds is not being created from supplier open interface

In 11i payment method the PAYMENT_METHOD_LOOKUP_CODE was stored on the po_vendors record.this value could be retrieved by :
SELECT payment_method_lookup_code
INTO v_temp_look_up
FROM po.po_vendors
WHERE Trim(UPPER (vendor_name)) = Trim(UPPER (var_vendor_nm));
Sites record also had PAYMENT_METHOD_LOOKUP_CODE that could be retrieved by:
select pos.payment_method_lookup_code
INTO v_temp_look_up
from po_vendors po,PO_VENDOR_SITES_ALL pos
where po.vendor_id=pos.vendor_id
AND Vendor_site_Id=var_Vendor_site_Id ;
Some of our old custom applications however ONLY USE the PAYMENT_METHOD_LOOKUP_CODE from the po.po_vendors RECORD.
Hence upon completion of the SUPPLIER OPEN INTERFACE the PAYMENT_METHOD_LOOKUP_CODE would be accessible from the po.po_vendors record.
Now we are upgrading to R12.
I did some reading and realized that r12 PAYMENT_METHOD_LOOKUP_CODE
Is stored in IBY_EXTERNAL_PAYEES_ALL and iby_ext_party_pmt_mthds.
I loaded a vendor via the interface using:
INSERT INTO AP.AP_SUPPLIERS_INT
(VENDOR_INTERFACE_ID,
VENDOR_NAME,
SEGMENT1,
VENDOR_TYPE_LOOKUP_CODE,
TERMS_ID,
SET_OF_BOOKS_ID,
PAY_DATE_BASIS_LOOKUP_CODE,
PAY_GROUP_LOOKUP_CODE,
PAYMENT_PRIORITY,
INVOICE_CURRENCY_CODE,
PAYMENT_CURRENCY_CODE,
DISTRIBUTION_SET_ID ,
ACCTS_PAY_CODE_COMBINATION_ID ,
PREPAY_CODE_COMBINATION_ID,
PAYMENT_METHOD_LOOKUP_CODE ,
TERMS_DATE_BASIS ,
ATTRIBUTE_CATEGORY,
ATTRIBUTE1,
payment_method_code)
VALUES
VAR_VENDOR_INTERFACE_ID ,
SUP_VENDOR_NAME_var,
SUP_SEGMENT1_var,
Upper(Trim(VENDOR_TYPE_LOOKUP_CODE_var)),
10000 ,
2024 ,
SUP_PAY_DATE_BASIS_LOOKUP_CODE_var,
Upper(Trim(Nvl(PAY_GROUP_LOOKUP_CODE_var))) ,
SUP_PAYMENT_PRIORITY_var,
SUP_INVOICE_CURRENCY_CODE_var,
SUP_PAYMENT_CURRENCY_CODE_var,
SUP_DISTRIBUTION_SET_ID_var,
'3007',
'3007',
'EFT',
SUP_TERMS_DATE_BASIS_var,
SUP_ATTRIBUTE_CATEGORY_var,
SUP_ATTRIBUTE1_var ,
'EFT') ;
I ran the supplier interface and it completed successfully.
I ran the query for the supplier:
SELECT * FROM ap_suppliers WHERE VENDOR_NAME ='MARVEN, MARVEN'
AND VENDOR_ID='35425'
AND PARTY_ID ='47546' ;
This query returned the correct record.
I then ran another query to get the iby_ext_party_pmt_mthds for the SUPPLIER.
SELECT * FROM iby_ext_party_pmt_mthds
WHERE ext_pmt_party_id IN (
SELECT EXT_PAYEE_ID FROM IBY_EXTERNAL_PAYEES_ALL
WHERE PAYEE_PARTY_ID='47546'
BUT IT DID NOT RETURN ANY VALUE!!!
I logged into the oracle payables and then went to the suppliers screen.
I then clicked the Payment Details link. Under the Payment Method section none of the payment methods were selected !
I checked the ‘Wire’ Payment method and saved.
I then ran the query :
I then ran another query to get the iby_ext_party_pmt_mthds for the SUPPLIER.
SELECT * FROM iby_ext_party_pmt_mthds
WHERE ext_pmt_party_id IN (
SELECT EXT_PAYEE_ID FROM IBY_EXTERNAL_PAYEES_ALL
WHERE PAYEE_PARTY_ID='47546'
And it returned the correct row.
Now I would like to know
Why is the iby_ext_party_pmt_mthds record was not created from the supplier open interface seeing that I specified a value (‘EFT’) for the payment method for the supplier?
kindly help...thanks in advance

It looks like the final answer is, I had it configured correctly. The problem I encountered was my testing of the signature. I assumed I could control the interval that was used to track the failed attempts.
I never found a way to do that and I can't find any documentation that tells me what the interval is. It is fairly small because I couldn't key in 3 failed attempts fast enough to trigger the deny action. A little patience and a scripted attack hit my server and it banned it every hour. All 3 attempts are hitting in < one second.
Signature statistics [process switch:fast switch]
signature 2157:2: packets checked [0:1] alarmed [0:0] dropped [0:0]
signature 2157:1: packets checked [0:19] alarmed [0:0] dropped [0:0]
signature 3106:0: packets checked [0:83] alarmed [0:0] dropped [0:0]
signature 3109:0: packets checked [0:10] alarmed [0:10] dropped [0:0]
signature 6250:0: packets checked [31:0] alarmed [10:0] dropped [0:0]
deny acl's created 10
signature 6056:0: packets checked [1:0] alarmed [1:0] dropped [0:0]
Interfaces configured for ips 1

Reservation not getting created from shopping cart for stores order.

Hi experts,
Reservation not getting created from shopping cart for stores order,process used is some custom BADI.Extended classic scenario is the procrss .
Please help me
Thanks in advance.

Hello,
please check below wiki:
Determination of the follow-on document type
Regards.
Laurent.

Internal Order not being created in cProjects-Accounting Integration

Dear All,
We are working on cProjects 4.0 with ECC 6.0,
Trying to do Accounting Integration.
For only one Project I am able to create Internal Order,
But I am getting following error.
Cost/revenue rate YP002 is not valid in organization 00000000
Inspite of assigning these rates to the organization 00000000
For other projects, when I click on accounting:
I get following error
"Single-Obj.Controlling on InternalOrders 0188993B3E343947A046B554FD886E03 000006000032 does not exist"
When I go to Controlling Cockpit, I see this Internal Order not being created.
Have revisited all settings, project type, etc.
How do I go about this.
Kindly help,
Navendu

Dear All,
I was able to solve the one of the problem, with the following settings,
Assign Cost Elements & Activity Types:
Choose Organization, Start & End Dates, Cost and Revenue Elements, Currency.
The start and end date of the cost/ revenue did not fall within the start and end date of the Organization.
Regards,
Navendu Shirali

Class not being created when running from jar

Hi all,
Tech info first:
IDE: Sun Java Studio Enterprise 8
Plaform: windows xp
I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        Main receiver = new Main();
        receiver.getPropertiesFromFile();
        //Create and set up the window.
        frame = new JFrame("R�FILOG RFID Empf�nger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(receiver.mainPanel);
        frame.setJMenuBar(receiver.createMenuBar());
        frame.addWindowListener(receiver);
        frame.setLocationByPlatform(true);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        portListener = new RFIDReaderComm(receiver, "COM3");
        portListener.getConfiguration();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
thanks in advance.

Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
Updating my computers CLASSPATH with the relevant paths - not working
Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
Tried updating the manifest.mf in the following way:
Created a text file Manifest.txt with the lines:
Class-Path: RXTXcomm.jar
Class-Path: BrowserLauncher2-10rc4.jar
ran the command (in the same directory as Manifest.txt):
jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
META-INF/
META-INF/MANIFEST.MF
classes/
classes/CRCCalculator.class
classes/Main$1.class
classes/Main.class
classes/RFIDReaderComm.class
classes/URLDialog$1.class
classes/URLDialog$2.class
classes/URLDialog.class
the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
Please, can anyone help me?

TS3276 my emails are not being sent from my desktop, but are capable of being sent by my apple phone. as well, I cannnot pull up any emails that I sent. They just disappear.

my emails are not being sent from my desktop, but they are capable of being sent from my iphone 5. Whatever I have sent just disappears from my desktop.

R1: Seems you didn't configure you email account in your Outlook client properly. please refer to the following KB article and try to create a new mail profile to configure your email account again:
http://support.microsoft.com/kb/2758902
R2: Do you want create subfolders under Inbox to category your emails? If so, we can just right click on Inbox > select New Folder... After that, we need to create rules to move or copy your emails to each subfoler. See:
http://office.microsoft.com/en-us/outlook-help/manage-email-messages-by-using-rules-HA010355682.aspx
Besides, in order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently. Concerning your other question, I suggest we create new posts for your other questions via:
http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
Thanks for the understanding.
Steve Fan
TechNet Community Support

Item Texts Is Not Being Created in BAPI_BILLINGDOC_CREATEMULTIPLE

Hi.
I am Using Bapi TO Create Invoice, Every thing is created successfully , but item text is not being created. Code is as below.
DATA: s_vbap TYPE vbap,
            t_billing TYPE STANDARD TABLE OF bapivbrk WITH HEADER LINE,
            t_datain TYPE STANDARD TABLE OF bapikomfktx WITH HEADER LINE,
            t_return TYPE STANDARD TABLE OF bapireturn1 WITH HEADER LINE,
            t_success TYPE STANDARD TABLE OF bapivbrksuccess WITH HEADER LINE.
      SELECT SINGLE * FROM likp
      WHERE vbeln = v_del_doc_no.
      SELECT SINGLE * FROM lips WHERE
      vbeln = v_del_doc_no.
      t_billing-salesorg = likp-vkorg.
      t_billing-ref_doc = likp-vbeln.
      t_billing-ref_item = lips-posnr.
      t_billing-doc_number = v_del_doc_no.
      t_billing-itm_number = lips-posnr.
*      SELECT SINGLE fkarv FROM tvak
*            INTO t_billing-ordbilltyp
*            WHERE auart EQ zsoa_so_header-auart.
      SELECT SINGLE auart FROM vbak
                  INTO t_billing-ordbilltyp
                  WHERE vbeln EQ order_num.
      t_billing-price_date = sy-datum.
      t_billing-ref_doc_ca = likp-vbtyp.
      t_billing-material = lips-matnr.
      t_billing-plant = lips-werks.
      APPEND t_billing.
      BREAK-POINT.
      CLEAR: t_datain.
     t_datain-ref_doc = v_del_doc_no.
      t_datain-ref_item = '000010'.
      t_datain-applobject = 'VBBP'.
      t_datain-text_id    = '0001'.
      t_datain-langu      = sy-langu.
      t_datain-format_col = '*'.
      t_datain-text_line = 'FSG 2829'.
      APPEND t_datain.
      CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
        TABLES
          billingdatain = t_billing
          textdatain    = t_datain
          return        = t_return
          success       = t_success.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
      LOOP AT t_return.
        itab_msg-type = t_return-type.
        itab_msg-msg = t_return-message.
        APPEND itab_msg.
        CLEAR itab_msg.
      ENDLOOP.
      READ TABLE t_success INDEX 1.
      p_i_bill_doc = t_success-bill_doc.
    ENDIF.
ENDIF.
CLEAR: itab_so_items, itab_so_items[] , delivery_no , itab_return[].
So Text FSG 2829 is not being created in Item Text.....

Hi Tahir,
You can check with the below thread
A question of BAPI_BILLINGDOC_CREATEMULTIPLE
Regards,
Pawan

Itunes 11 shows zero photos in Aperture and ApertureData.xml not being created in library

I've tried to do some trouble shooting of this problem. I've rebuilt permissions, I've repaired and rebuilt the Aperture library, I've made sure sharing previews is always for iLife and iWork, I've created a new library, switched to it and switched back and I can't get iTunes to see my albums and pictures from my iPhoto library when I try to sync through Aperture. What I have found is when I created the new temporary library and loaded one pic into it, a file in the package contents called ApertureData.xml is created, which isn't created in the iPhoto libary, it has AlbumData.xml. iTunes does recognize the temp library and photo. I deleted the AlbumData.xml, but it was just recreated. It seems Aperture is supposed to be creating a file that it isn't. Any help would be appreciated, I'm trying to migrate from iPhoto to using Aperture exclusively to manage photos and sync with devices. All software is up to date. Thanks.

in case anyone searches and finds this question, but importing by iphoto library to aperture into a new library, I fixed the problem. I do not know how to fix the original issue of the aperturedata.xml not being created in the origianl iphoto library.

Invite Email not being sent from iCal from a Google Apps calendar

Hello,
I am running Mac OS X 10.6.5, iCal 4.0.4, and am attempting to do the following from a Google Apps calendar I have setup in iCal. Please note that it's not gmail, it's Google Apps. If that makes a difference. That being said...
I am trying to create a meeting invite from iCal. I am able to create the invite and add attendees with no problem. When I hit send (from iCal), the invitees do not receive an email notification of the event, but it does appear their calendar (both in iCal and via Google Calendar on the web). I need an email to be sent to the invitees that they have been invited to a meeting, not just to have it appear on their calendars.
When I create the meeting invite via Google Calendar on the Web the invitees do receive an email notification (as specified in their calendar preferences). The issue only happens when the meeting invite is created in iCal.
When an invitee accepts or declines a meeting via iCal I receive an acceptance or declining email. Just not when the meeting invite is sent.
Also, I am able to create a meeting on one of the "On My Computer" calendars in iCal, invite people, and a meeting invitation is sent as expected.
And again, the invitees have notification of meeting invites turned on in their calendar settings (as is shown by the fact that when the invite is sent out via Google Calendar on the Web they receive an email with the invite).
Thanks! Any assistance would be awesome.
Aaron

That was actually my post on the Google forums
Here is what I have found so far (and hopefully some of my assumptions are correct, because we're making the full switch to Google Apps this weekend and I am assuming it will work after this). This is long, but I'm trying to be thorough. Also note that I have updated to 10.6.6 since the time I first posted my last message.
We are currently piloting Google Apps, so our primary domain (which I will refer to from now on as domain.com) still points to our old exchange servers. Mail is currently being delivered to our Google Apps pilot accounts the following way:
1. User sends an email to [email protected]. This email is delivered to our old Exchange servers.
2. Once the email is received on our old Exchange servers it gets forwarded to our Google Apps test domain (gtest.domain.com).
This seems to be an important piece of the puzzle as our primary domain (domain.com) shows up on the Google Apps for Admin dashboard as improperly setup (which is correct, because we're currently piloting)
So, in iCal I have my Google Apps account setup (I'm one of the pilot users) the following way. I added the Account as Google calendar in iCal, but once the account shows up it shows up as a CalDAV account.
Under the account information tab:
CalDAV
Description: [email protected]
User name: [email protected]
Password: my password
Under the server settings tab (*NOTE: these were entered in automatically when I setup the calendar as a Google calendar)
Server address: www.google.com
Server path: the path to my calendar.
Use SSL is checked
Use Kerberos v5 is NOT checked
So, during my testing I was sending meeting invites from people who were in the Google Apps pilot to other people who were in the Google Apps pilot. When I was doing that, no invitations were getting sent.
I created a new email account on our exchange server ([email protected]) but did NOT set it up to be a part of the Google Apps pilot (this means that emails were not being forwarded from [email protected] to [email protected]). Doing this successfully delivered all invites, cancellations, and meeting updates from iCal!
From what I can tell there must be something going on (probably my own fault) when a calendar invite is sent from my Google Apps account, through our old Exchange system, and then back to our Google Account. My assumption is it has something to do with the fact that our MX records for domain.com currently point to our old exchange servers, and the MX records for gtest.domain.com point to the Google Apps servers. It may also have something to do with the SPF record which only allows emails from domain.com to be sent from our Exchange servers.
Those are just guesses though as I am not very knowledgeable in that area.
I hope this helps and I would love to hear about anyone else working on this issue.

Nodes not being created?

I am having a problem with my laptop. I had this issue with my USB stick which was fixed by manually creating nodes (discussed here http://bbs.archlinux.org/viewtopic.php? … highlight=). However, upon trying other usb devices that work just fine on my desktop, I have the same result as I did with the usb stick. The nodes are not being created in /dev/ even though dmesg shows that the usb device was connected. I have a custom kernel and hotplug is NOT installed.
Any ideas on where to look with this? I have tried reinstalling udev and upgrading the kernel. Thanks for any help,

jftaylor21 wrote:
hey jskier, what exactly did you have to enable in the kernel to get it working? I am having the same problem and cannot figure it out.
Thanks.
First, my apology for not mentioning what I did. My laptop is in for repairs, but from what I recall I just enabled CONFIG_HOTPLUG located at General Setup >> Support for hot-pluggable devices. I use 2.6.14, so if you can't find it there it may be somewhere else for different kernel versions. Good luck!

User Profile Disk not being created

Hi,
I created a new 2012 VDI collection. Things seems to be working fine except for the User Profile Disks are not being created. From my understanding a .vhdx prefixed with the user's SID is supposed to be created when the user logs into one of the virtual
machines from the collection. I can see that a UVHD-template.vhdx" was created correctly but when logging on to one of the deployed virtual machines from the pool there is no other .vhdx files (except the template).
From what I've read the virtualization hosts must have write access to the share (they do). I can't seem to find any other requirements. I've searched through event viewer and found nothing. I'm not sure which logs to check on which server.
Anyone have any ideas what I'm missing?

Hi,
Thanks for your post in Windows Server Forum.
Kindly follow the below mention article and check the necessary steps for creating UPD, try to create new UPD.
1. Working with User Profile Disks on Session-Based Desktop Deployments
2. Easier User Data Management with User Profile Disks in Windows Server 2012
Hope it helps!
Thanks,
Dharmesh

My notes are not being passed from one device to another

My notes are not being passed from my ipad to my ipad mini.

There can be several different accounts in the notes app if you have email account that allow you to sync notes. I do not use iCloud email, but I have two IMAP email accounts that sync notes. I wanted to know if you were selecting the correct account on the Mini.
When you launch the Notes app, you can tap The Account button in the upper left corner in order to switch between accounts. If you do not have another Notes account, try turning Notes off on the Mini in Settings>iCloud>Notes>Off. Restart your iPad, go back in and turn Notes on again.

Replenishment random storage -TO is not being created

Hello,
Fixed Bin replenishment
I am implementing the same above process for random storage.I have configured everything as mentioned above and made sure the stock is available for replenishment.For some reason the Replenishment TO not being created during the picking confirmation.
My random storage is SU managed.This storage type needs to be replenished from an open storage which is not SU managed. Is there any probem in the pelletization during the TO creation? Did i do something wrong having the random storage as SU managed?
Please suggest..

Hi Pranath,
Check the following (masterdata):
- the material must created for the replen st as well
- enter your max bin qty, min bin qty, round qty, replen qty
Chek the following config:
- Define Stock Transfers & Replenishment control
- Define Replenishment Control for Storage Type - Make sure you have "Replen Method" = 2. Did you specify a replen movement type? If not, I would suggest this...keeps everything tidy.
I remember from my initial testing that it didn't work, because my stock level was already below my min stock level. I added stock to my ST and moved it out again (with LT10 for testing) to a different ST. The replen TO was created automatically.
Let me know how it goes.
Hein

Order quantity not being created from BAPI_SALESORDER_CREATEFROMDAT2

Similar Messages

Maybe you are looking for