Order related Inter-company Billing (Third Party Order)
Hi SAP Gurus,
We are using SAP R/3 4.6C version. Normally, the inter-company billing are delivery related and this is working fine. I am configuring the order related Inter-company billing, i.e. Third Party drop shipment with Inter-company. I refered to SAP notes 203876, 63459, 381042 and maintained the copy control between OR => IVA (for TAS) as follows:
Copying requirement = '013',
Invoiced quantity = 'F', (*)
Quantity/value = '+',
Pricing type = 'G'.
The issue I am facing is when I try to create an Inter-company invoice (after the F2 Customer invoice), the End customer details is being pulled instead of the Inter-company customer details. In other words the Inter-company invoice is also being issued to the End customer. Also the prices are showing in negative.
Kindly share with me if any of you guys know a solution for this. I have searched all the SAP forums, but couldn't find a similar issue.
My concern here is, in none of the SAP notes, there is no information about the copying requirement at the header level between OR=>IVA. I am not sure whether this is causing the issue.
Regards,
Saravanan
Hello Mrinal,
Please review the note 381042 Order-related intercompany billing in Releases.
o Report RVIVAUFT instead of report ZZIVAUFT
o Standard requirement 036 'Item/order related IB'
Use this requirement in the copying requirement for billing
documents for your process flow.
o Standard requirement 018 'Order-related IB' instead of
customer-specific output requirement 990.
Use this requirement in the output determination procedure of
your billing documents (in the standard system, this is procedure
V10000 'Billing outputs') for output type RDIV.
o Standard ouptput type RDIV instead of customer-specific output
type ZZIV.
Similar Messages
-
Problem with RDIV output for order related inter company billing
Hi ,
Developing a order related inter company flow . IC Billing (type IVA) gets generated through RVIVAUFT , but facing the following issues with output (though configuration has been done as per note 728993)
system only creates SAP standard billing type IVA i.e not any ZIV2 which is a copy of IVA (Find IVA is hard coded in RVIVAUFT )
why note 728993 says V10000 'Billing Output i.e why not V40000 // Intercompany billing
No document flow on IVA billing generated through RVIVAUFT. It does not show its link with original sales order .
It will be very good if someone Thanks
With regards,
MrinalHello Mrinal,
Please review the note 381042 Order-related intercompany billing in Releases.
o Report RVIVAUFT instead of report ZZIVAUFT
o Standard requirement 036 'Item/order related IB'
Use this requirement in the copying requirement for billing
documents for your process flow.
o Standard requirement 018 'Order-related IB' instead of
customer-specific output requirement 990.
Use this requirement in the output determination procedure of
your billing documents (in the standard system, this is procedure
V10000 'Billing outputs') for output type RDIV.
o Standard ouptput type RDIV instead of customer-specific output
type ZZIV. -
Order related inter company credit memo - Order status 'Not Invoiced'
Hi,
We have recently created 'Order related inter company credit memo' process for return Stock Transport Orders(STO). For this, we used order related billing (billing relevance = C i.e. Relevant for ord.-related billing - status acc.to target qty) with standard item category 'G2N'. The issue is even after invoicing, sales order item status is 'Not Invoiced' and header status is 'Open', hence these orders are picked up multiple times during background invoice run and multiple invoices are being created.
How do we control the 'Completion' status in order related inter company billing? VBUP-FKSAA is not changed even after billing document creation and remains as A i.e. Not yet processed. Do i need to check VBUP-FKIVP since this is inter company billing.
I have also tried with TVAP-FKREL as 'B' i.e. Relevant for order-related billing - status according to order quantity but of no use.
Please advise.
Thanks in advance.
Regards,
Ganesh
Edited by: Venkata Ganesh Perumalla on Nov 10, 2010 6:08 PMHI,
Check too the Note 308989 - Consultant note for cross-company transactions
It says:
I.1.5 Returns request (IR) - returns delivery - customers credit memo -
intercompany credit memo (IG) (RETURNS)
The customer credit memo is created for the returns request and the
intercompany credit memo is created for the returns delivery.
Regards,
Eduardo -
Order Related Intercompany Billing - Third Party Order
Dear all,
I have configured intercompany billing that is based on the delivery and i have done that successfully, then I tried the third party process but after billing the third party order then the intercompany billing doesn't show up in the vf04, I have searched the SAP Notes especially SAP Notes 63459 but I really haven't got the clue how to do that clearly, if somebody can help me how to configure the intercompany billing for my requirement. I'm using SAP 5.0. I believe something missing in the copying control between sales document and billing document and also for the output type.Please help me very urgent.hi,
Customizing settings are reported in notes 338922, 109254 and 308989.
During delivery creation the LIKP fields VKOIV/VTWIV/SPAIV/FKAIV/PIOIV/FKDIV/KUNIV must be filled in program FV50XFLK_LIKP_FUELLEN_IV_UML. If you checkt this table and not all of these fields are filled, you have the wrong the customizing. If the error is in your pruduction there is a report with which you can correct the relevant deliveries (of course after correcting your customizing): see note 176476.
Balazs -
Direct Ship orders - Purchse Requisation ME51N - AFS - Third Party orders
Hello,
There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
But this User exit is missing in ECC version of SAP for AFS.
Basically when the Dierct ship Sales Order is created, corresponding PR is created for it and using this User exit certain fields in this corresponding Purchase Requisition is filled from Sales Order but this user exit is missing in ECC system.
Could anyone please let me know how SAP handles the Third party Orders in ECC AFS system?
Thanks,changed the requirement
-
Order Related Inter Company configuration required
Hi,
Can anybody tell me what all customization need to be done for order related intercompany billing?
I gone through with OSS note 63549 but still not clear.
Thanks in advance
Regards,
SATYAHi,
As to the intercompany sales process, you should have the following configuration:
1. If you need to use the intercompany billing document, billing type IV must be maintained and assigned to the relevant sales document types
2. Output type RD04 is used to enable intercompany billing to carry out posting to vendor account or invoice entry. In the standard system, billing type IV is assigned to output procedure V40000, which contains this output type. For information on setting up intercompany billing, see the online implementation Guide. Billing type IG is used for internal credit memos.
3. For condition records used in intercompany sales processing, one of the following condition types must be maintained:
* PI01 (fixed amount per material unit)
* PI02 (percentage of the net invoice amount)
4. Permissible combinations of plant and sales organization must be defined
5.Sales area data (sales organization, distribution channel, and division) must be assigned to each plant that participates in intercompany sales processing
6. You must also create the following Sales master data:
7. A customer master record for intercompany billing; this must be assigned to the ordering company code.
8. Condition records for intercompany billing for every permissible combination of plant and sales organization
Beside these configurations, you should also define the G/L account number for intercompany sales processing.
Hope can help you!
Good day
Tao -
Sales Order and Purchase Order linkage in tables for third party orders
Hi all ,
For third party process order s
In which table can I find the Sales order and Purchase Order linkage .
thanks
ksrHi Sridhar ,
Refer Table EKKN for PO and SO Linkage.
Table EBKN for PR and SO Linkage.
Regards
Ramesh Ch -
Inter-company billing stock tranport order
Dear all,
We are having a scenario where in we are doing STO using purchase order document type NB, but in the purchase order we are not getting the "condition tab".
Have created a pricing procedur for STO. But in the
MM- Purchasing- Conditions- Define schema determination- Determination of schemas for stock transport order we are not in position to see documenty type "NB".
The option that are available are UB, EUB and LU but not "NB".
Request to kinldy do let us know is to how can we get the "condition tab" in purchase order.
regards,
maheshHi
If both the plants belong to the same company code then billing is not possible.
This process thus becomes an Intrac Company stock transport process
Use Document Type UB for your Process.
The excise entries are generated at the time of Goods receipt only.
I request yout please test the same in Development, as i am not sure of the excise postings & the excise registers as i have not worked on that.
Thanks & Regards
Kishore -
Inter Company Billing (for order-related)
Dear SD Expert,
I have problem with "Inter Company Billing". What I have searched are showed in term of "Inter Company Billing (for Delivery-related). But, my case is about "Inter Company Billing (for Order-related). Thus, I got problem in created inter-company billing.
<u><b>Ex</b></u> In "Copy Control from Sales Order to Billing", the configuration guide suggest me to use "014 (Hdr dlv.rel.IC bill.)"; but, I didn't want it to copy from delivery order. How can I solve it?
Could you help me on that?
Best Regard,
PrachHi,
I saw in SAP Forum that you faced a similar problem sometime back as I am facing now. Just curious to check whether you had a solution for the same, if so, please share with me. Please see below for my problem.
We are using SAP R/3 4.6C version. Normally, the inter-company billing are delivery related and this is working fine. I am configuring the order related Inter-company billing, i.e. Third Party drop shipment with Inter-company. I refered to SAP notes 203876, 63459, 381042 and maintained the copy control between OR => IVA (for TAS) as follows:
Copying requirement = '013',
Invoiced quantity = 'F', (*)
Quantity/value = '+',
Pricing type = 'G'.
The issue I am facing is when I try to create an Inter-company invoice (after the F2 Customer invoice), the End customer details is being pulled instead of the Inter-company customer details. In other words the Inter-company invoice is also being issued to the End customer. Also the prices are showing in negative.
Kindly share with me if any of you guys know a solution for this. I have searched all the SAP forums, but couldn't find a similar issue.
My concern here is, in none of the SAP notes, there is no information about the copying requirement at the header level between OR=>IVA. I am not sure whether this is causing the issue.
My mail id is "[email protected]".
I would appreciate your reply to this message.
Regards,
Saravanan -
Third party order & Inter copany STO
HI SD Guru's
can anyone tell me please about the configuration steps and the Procedure for "Third Party" & "Inter company STO"
<b><REWARDS OFFER REMOVED BY MODERATOR></b>
Thanksdear SP
THIRD PARTY SCENARIO
in third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
the processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing:-
if a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
when you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
you process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Click on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
STO PROCESS
Stock Transfer Orders comes into picture when the stock is moving / Transferring between two different plants with two Different Company Codes or Stock Transfer between two plants with One Company Code the Difference are given below:
P.O Order types and Delivery Types
STO: - Stock Transfer Order Intra Company
Stock Transfer between Two Plants with One Company code.
The Purchase Order Type is Used in this case is "UB".
And the Delivery Type Used here is "NL".
Goods Movement type: 641
Item Category in delivery is NLN
STPO: - Stock Transfer Purchase Order Inter Company
Stock Transfer Purchase Orders between Two Plants with Two Different Company Codes.
The Purchase Order Type is Used in this case is "NB".
And the Delivery Type Used here is "NLCC".
Goods Movement type: 643
Item Category in delivery is NLC
A. Configure Intercompany Stock Transport Order
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assign the supply source (Delivering Plant).
Create a purchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
AND
1. Customer No. for the Goods Receiving Plant - OMGN
2. Availability Check- Checking Rule (if necessary) - OMGN
3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders, NLCC)
4. PO type (which i believe you have done) - OMGN
5. Assign Vendor No. to the Supplying Plant (done) - VK02
6. Assign Customer No. to the Purchasing Plant for the Inter-Company Invoice (but you need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),
IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org
***and by the way for the Invoice to work between Cross-Company Plants, you need also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure
INTERCOMPANY PRICING:
PI01 Intercompany: fixed amount per material unit
PI02 Intercompany: percentage of the net invoice amount
These condition types specify that the price charged by the delivering plant to the sales organization is shown as a statistical value in the sales order and an effective charge in the internal invoice.
The condition records you create and maintain for intercompany billing are the same kind of records that you create for pricing in general.
IV01 Inter-company Price ERLOS Revenue
IV02 Inter-company % ERLOS Revenue
STO CONFIG:
The following steps have to be followed in order to configure stock transport order between two plants.
1. Create a vendor for the Company code of the receiving plant using account group 0007 via T-Code XK01.
2. In the purchasing data view assign the supplying plant and the schema group
3. Create customer with the sales area of the vendor.
4. The shipping conditions, the delivering plant and the transportation zone determine the route in the STO.
5. In the pricing procedure determination relevant to the STO assign document pricing procedure and customer pricing procedure to get the pricing in the invoice.
6. Maintain condition records for pricing condition.
7. Maintain carrier as a partner in the customer master.
8. In OMGN select the supplying plant and assign the company code and sales area. Similarly select the receiving plant and assign the company code and sales area (The company code to which the plant is assigned to).
9. Assign the delivery type and checking rule to the document type.
10. And finally, assign the purchasing document type to the supplying plant and the receiving plant.
11. Create the STO using T-Code ME 21N and save.
12. Check for release strategy if any and release using T-Code ME 28.
13. Create delivery in background using VL10G.
14. If delivery is created, it is an indication of correct configuration and master data creation.
Stock transfer between two plants in different company codes is known as inter company stock transfer.
Material should be maintained in both supplying and receiving plant MM01
Stock should maintain only in supplying plant MB1C
Create receiving plant as a customer in supplying plants company code and sales area XD01
Assign this customer number in receiving plant details OMGN
Assign supplying sales area in supplying plant details OMGN
Assign delivery type NB for in combination of supplying/ receiving plants.
Create STO ME21N
As it is normal there in the item details we should get shipping date i.e. customer number
Go for Delivery VL10B
Shipping point *****
Select PO go for execute
then select the delivery then go for delvy ............create delvy,,,, delvy number generated.
Goods Issue VL02
Delvy doc **********
Click on picking
enter the picking qty
Click on PGI
in the mean time check in the PO history you will get the details
Goods receipt MIGO
Stock overview the stock will be updated....
Check the below link
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2ba31643ad11d189410000e829fbbd/frameset.htm
Stock transfers that include deliveries and billing documents/invoices are only possible between plants belonging to different company codes.
If you want to carry out a cross-company-code stock transport order with delivery but without a billing document, you must set the Relevant for Billing (data element FKREL) indicator in Customizing of the item type to "blank" (Not relevant for billing).
The following applications are involved in this type of stock transfer:
Purchasing (MM-PUR) in entering the order
Shipping (LE-SHP) in making the delivery from the issuing plant
Billing (SD-BIL) in creating the billing document for the delivery
Inventory Management (MM-IM) at goods receipt in the receiving plant
Invoice Verification (MM-IV) at invoice receipt in the receiving
Transfer of goods from one location to another location, it may be between plants within the same company code or in different company code's plants.
within the company code, but plants,
receiving plant will raise the STO in Supplying/issuing plant-ME21n,
Supplying plant will deliver the goods to receiving plants ,
then we need to pick n post the Goods Issue-VL02n,
now when we can observe that the STO qty will be added into receiving plant and reduced in Delivering plant,
To do this, we need do prior customization in SPRO-IMG,-
material should be created in both plants( receiving & Supplying)
-maintain the stock only in supplying plant
-create a dummy customer in supplying plant's sales area(if u have one sales area, create in tat comp code n sales area)
-assign this customer number to receiving plant's details along with the sales area,
-Assign the STO doc type(UB) to Supplying plant, along with checking rule
-Assign the Del type (NL/NLCC) to Supplying n receiving plant.
*Del type=NL is not relevant for billing, where as NLCC is relevant for billing
rewards pls
siva -
Third-Party Order - Cost from PO incl. Freight into Sales Invoice
Hello SD gurus,
Had a question about drop shipments(Third Party Orders). At our company, the third-party order related PO sometimes has Freight/Customs conditions, but they do not come on to the VPRS(cost) condition on the corresponding Sales Invoice. What should I do to make them add up on VPRS?
See sample PO conditions and history tabs below
You can see the correct amount(including freight) shows up as cost of goods sold(in the accounting doc for its GR document) below
But the VPRS line on the sales invoice only shows the GR amount, does not include freight/customs charges as seen below
Is there any way I can get VPRS to include the Freight/Customs amounts as well. Please help me out....
My third-party order copy control VTFA configuration for OR =>F2 for ItemCategory TAS, the billing quantity is currently set to F.
Document Flow for our drop-ship orders is as follows: Creation of sales order triggers creation of a purchase requisition which in-turn gets converted into a PO. Once the GR happens on this Vendor PO the Goods Issue and Sales Invoice is triggered immediately. The Vendor IR comes last.
Thanks and regards,
WayfarerHello
As per the standard Third party process, cost in the billing document will be picked from Invoice receipt of the vendor (MIRO).
Basically here the cost determination happens from below three sources.
1. MIRO (invoice receipt of Vendor)
2.Goods receipts (MIGO )
3.Purchase order
Highest priority is given to the number 1. MIRO.
In your both the cases, kindly check MIRO price & quantitiy.
thank you
Anirudh -
Account posting keys involves for process of third party order
hi
pls tell me the process of third party order and whos account stock will be debited and tell me the account posting keys involves in this process and how it operates
regards
Ram
Edited by: Ian Wong on Aug 13, 2008 7:06 PMTHIRD PARTY SCENARIO
In third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
The processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally, can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing
If a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
You process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Goods receipt will be posted when ever the vendor ships the goods to our customer.
We will do this transaction in SAP using MIGO.
Invoice receipt is done when the Vendor sends us the invoice.. ( I.e Billing ).
It can be done using MIRO.
THe above two steps are standard and manual. There are many other ways that the actual process can happen. If the client follows EDI standards then the Goods receipt and Invoice receipt can be done through IDOCs automatically.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Click on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1) After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always following a third party process for a material then you have to create the material using item category group BANS.
The procurement type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurement ( in house manufacturing and external procurement).
Step 2)
the item category in the order should be manually changed as TAS.
For that you need to configure the item category determination
Order type + item cat Group + Usage + High level = Item cat + Manual item cat
OR + NORM + + = TAN + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevant for billing indicator as F
step 4)
The schedule line category for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requisition order immediately after the creation of the sales order and the PO to vendor is created against this purchase requisition.
Award if Helpful,
Regards
Priyanka.P -
HI SAP GURUS
CAN ANY ONE HELP ME OUT
1. WHAT IS THIRD PARTY ORDERING? HOW WE CONFIGURE THIRD PARTY ORDERING ? DOES DELIVERY OCCURS IN THIRD PARTY ORDERING? WHEN
2. IF I HAVE GOT 4PLANTS HTEN HOW MANY BILLING CAN BE DONE?
3. AFTER PGI WHAT HAPPENS IN FI ? WHICH ACCOUNT IS CREDITED WHICH ONES DEBITED?
4. IN PRICING PROCEDURE I HAVE NET PRICE AS Rs100 AND TAX IS Rs30 THE TOTAL IS Rs130. WHICH ACCOUNT ISDEBITED AND WHICH ACCOUNT IS CREDITED?
5. HOW STOREGE LOCATION IS DETERMINED? WHAT IS MALA AND WHAT IS RITA
THANKS AND REGARDS
RAMHi ram
this is the process of third party.
process Flow for 3rd Party Sales
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *-- Seema Dhar
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
Please Reward Points. If you feel this answer add value to you
Thanks & Regards
Mubeen. -
Third-Party Order Fulfillment Process Scenario
Hello,
I would like to know if any of you have come across a use case where the Third-Party Order Fulfillment is Not based on the Supplier/Manufacturer shipping out the material directly But the Buyer (and in some cases even end User/customer) arranges this themselves. This is very common in International Trade where the Buyer/Business arranges the shipment themselves by using the services of a Freight Forwarder who Ships the material to the end user/customer after the Supplier/Manufacturer has made the Material available. In such cases the actual Shipment could take days or weeks from when Material is made ready by the Suppliers.
Currently the Third-Party Order Fulfillment Process assumes only one scenario and that is the Supplier will ship the material and inform their Buyer of Delivery. But in International Trade this is not the case and the Incoterms in the Purchase Order can be different to the Incoterms in the Sales order example in the PO the incoterms could be Ex-Works and in the SO CIF.
This leads to requirement of ASN and separate Inbound and Outbound Delivery and their separate Release in this Process as well.
These are not currently supported in the Third-Party Order Fulfillment process thus the Third-Party Order Fulfillment process in ByD has a very limited use in its current form.
If there are other users who have come across this as well then it would be nice to have your comments and possible workaround.
Best regards
NickThere is no standard SAP solution for this requirement.
You can trigger output from inbound delivery document to generate EDI output and send delivery information to customer.
You will require to define custom output type , partner profile and link with custom fucntion module.
FM should have logic to pick information from 3rd party sales order and inbound ASN and generate IDOC
Hope this solution will work for your requirement -
Inter company Billing document not created
Hi,
I am in a service industry project where invoicing is done through order ,no delivery takes place.I have done configuration related to inter company billing like Assign inter company billing type to Order ,assign plant sales area and internal customer to the ordering Sales Organisation.
After this we are able to invoice the external customer but when we are trying to create inter company billiing document through the same order a log is created which says"Item already fully invoiced"
What should i do now?
Plz suggest.
Regards,
SatyaLuk we are using quantity contract and through that we do DP91 for resource related billing which generate a Billing Request where sales document category is L (debit memo request) and then we billed that billing request to the end customer.But when i again use that billing request for inter company billing system says "item is fully invoiced"
Now tell me what should i do?
Regards,
Satya
Maybe you are looking for
-
Login Failed error while creating a CR using Universe
Hi, We created an Universe in SAP Business Objects system using SAP BW as source system and we selected sales cube for the universe. For ex universe name is : xyz Now i want to use this universe in crystal reports, we are using CR2008. I logged in to
-
Dbms_sql.parse: varchar2a version does NOT throw ORA-24344
I'm trying to execute some generated code in 10.2. using the varchar2a version of dbms_sql.parse. This works fine, but when the there is something wrong in the generated code, I do not get an exception (I do get it with the varchar2 version). So when
-
Filters are not working on resulting image smaller than 8191x2048
I have created AIR application using SDK 3.5 over the Flash Builder 4, and I am targeting AIR player 1.5.3. I have large text where user can apply outline. And to apply outline I am using Glow Filter, but somehow it is not working for texts which are
-
Hi Expert, in ECC DEV, I'm trying to activate DataSource SAP-R/3/PM/0PM_SCH_PLND_ORDER, but got this error: DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SFWS_SC is off Message no. R8371 Please help. Thank you. Edited by: Ting Chen on
-
Oracle VMS for X86 version 2 can upgrade to VMS version 3?A method?
Oracle VMS for X86 version 2 can upgrade to VMS version 3?A method?Need, Now I don't want to go to my server, do not want to make too big movement, the need to upgrade the VMS, although Oracle 2 cannot be upgraded to 3.0.