Order replication from ECC to CRM
Hi All,
The requirement is we have different order types for example, ZOR, ZGW, KE in ECC out of which we would like to replicate only ZOR order type orders. So I used Adapter SALESDOCUMENT in CRM and set filters with AUART (Order type) EQ ZOR and ERDAT (Creation Date) GE '04/05/2010' so my assumption is if any ZOR order is created after 04/05/2010 they will replicate to CRM.
And I created transaction type ZOR in CRM and ZGW, KE are not created in CRM as I do not need them. I checked CRMFILTAB and the filters are there but the issue is:
Everytime I create ZOR order in ECC these order are replicating fine. There are 2 BDOCs generated R3AD_'CUSTOMER' and CSA_ORDER_'Order number' successfully...so far so good.
Whenever I create any order with ZGW, KE Orders, even these orders are trying to replicate to CRM and getting failed as we do not have ZGW, KE Order types in CRM. The BDOC is R3AD_XXXXXXX is failing with the following error messages.
-->Processing of document with Guid A6BE324C3C92B353E10000000AFEC80C is canceled
-->Business transaction type ZGW does not exist
-->Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
For example, if the order is created for customer 7719, In SMQ2, R3AD_0000007719 as failed and this is blocking all other 7719 customer related changes. How to make these other orders not even try to replicate to CRM and fail.
Please advise.
Thanks,
Sharath.
Hi Shekar,
Thanks for the Reply.
Here are my versions
CRM --- CRM 2007
ECC --- ECC 6.0
I know we are eligible for Scenario A but I haven't activated the Scenario A settings as of now. What we did was, we made the message in ECC from Error to Warning so that it'll allow us to change the order created in CRM. I wasn't aware of the scenarios during that time as I was new to CRM, recently I went through and need to activate them in the system.
In CRMPAROLTP Table, these are entries I have
CLIENT PARNAME PARNAME2 PARNAME3 CONSUMER
300 CRM_EXIT_BEF_DATA_TRANSFER CONDITIONS CONDITIONS CRM
300 CRM_EXIT_CRM_GET_QNAME BEABILLSTACRMB CRM
300 CRM_EXIT_CRM_GET_QNAME BEABILLSTAIPMI CRM
300 CRM_EXIT_CRM_GET_QNAME BEABILLSTAIPMO CRM
300 CRM_EXIT_CRM_GET_QNAME BUPA_REL CRM
300 CRM_FILTERING_ACTIVE BUPA BUAG_MAIN CRM
300 CRM_FILTERING_ACTIVE BUPA BUPA_MAIN CRM
300 CRM_FILTERING_ACTIVE BUPA BUPA_REL CRM
300 CRM_FILTERING_ACTIVE BUPA CUSTOMER_MAIN CRM
300 CRM_FILTERING_ACTIVE BUPA CUSTOMER_REL CRM
300 CRM_FILTERING_ACTIVE BUPA_HIERARCHY BUPA_KNVH CRM
300 CRM_FILTERING_ACTIVE CONDITIONS CRM
300 CRM_FILTERING_ACTIVE EQUIPMENT EQUIPMENT CRM
300 CRM_FILTERING_ACTIVE MATERIAL MATERIAL CRM
300 CRM_FILTERING_ACTIVE VEND VENDOR_MAIN CRM
300 CRM_NO_BEFORE_IMAGES SALESDOCUMENT CRM
300 CRM_RELEASE
Please let me know, if I am missing anything. Do you think activating Scenario A is important? I think my versions suite that I need scenario A, If I am not wrong.
Thanks,
Sharath.
Similar Messages
-
"Error in validation" in order replication from ECC to CRM.
Hi,experts,we always have a problem,that is the "Billed" status can not be replicated to CRM from ECC(We excute billing in ECC).
In the BDOC we always have error message "Error in Validation (Details: transaction SMW01)".
I found the preceding contract of the order had been locked by the middleware user.
Is it related with the BDOC validation??
Can anybody suggest?
Thanks.
JerryHi,
Please unlock Queue using SMQ1 ( Outbound ) & SMQ2 (Inbound Queue)
First try using SMQ1 & SMQ2 in CRM then try in ECC.
Regards,
Rajendra Sonawane -
Equipment Replication from ECC to CRM 6.0
Hi Gurus,
I am trying to Replicate equipments from ECC to CRM 6.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
Sharath.Hi Sharath,
I am getting the same problem as yours while trying to download EQUIPMENTs from ECC to CRM.
I have done the following steps:
1. Created a category for the object family 0401 and assigned the relevant set types to it.
2 Maintained the settings for downloading equipments into CRM at:
SPRO --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> Define default settings for replication equipment.
3. Activated BADI CRM_EQUI_LOAD
On triggering the initial load am getting 2 F02 state CRM_EQ_DMBDOC bdocs w/o any classical / extension data in it. When I check for the trace I get to see the message 'No objects selected' for the ECC system though there are equipments in the ECC equipment table EQUI.
Would appreciate if you could share how did you solve your problem.
Thanks in advance for the help! -
Customer replication from ECC to CRM
Hello everyone,
I am having some difficulty replication a customer from ECC to CRM.
In our environment, customers are generally created from CRM & then replicated to ECC.
Now we are creating a new Distribution channel & hence want to extend all our existing customers to the new DC.
Since I am a SD Consultant, I was thinking of extending the customers in ECC.
I tried extending a customer which was originally created in CRM. When I extended it to the new DC in ECC, it dint come over to CRM.
I cannot see any BDOC in SMW01 also.
Also when I checked the Filter setting in R3AC1 for objects BUPA_MAIN & Customers .. there is nothing set in the filters for the source ECC.
Do I have to check any additional objects which I need to check ?
Or is it that no settings means nothing created in ECC would come over ?
Can anyone guide me so as to understand why this is happening.
Also if there are any filters which i need to check, can anyone tell me what tcode & what adapter objects do i need to check ?
Thanks
Vin
Edited by: vinit parkar on Aug 3, 2010 10:58 PMHi,
If you are downloading Customers from ECC(XD01/XD02/XD03) then CRM uses the adapter object CUSTOMER_MAIN and not BUPA_MAIN. You can check if there are any filters in this object.
Alternately you can check if the delta is active in ECC. I do not remember the transaction for checking this but you can find the same from the menu path.
Cheers
Binai -
Issues in employee replication from ECC to CRM through ALE/IDOC
Hi,
We are replicating the employees from ECC to CRM through ALE/IDOC.
Some times for some employees, the Idoc status in CRM is 52(Application document not fully posted) in CRM (WE02 tcode)
If I see the details its showing as " Identification Category BPCCOD is Not Assigned to Any Identification Type"
What I need to do now to avoid this.
Pl suggest
Regards
BABU.Hi Babu, I'm having the same error when I replicate my employes. I have define BPCCOD in spro - Cross-Application Components - SAP Business Partner - Business Partner - Basic Settings - Identification Numbers, but this configuration does not resolve my problem.
Could you resolve this problem?.
Pls. let me know...
Regards,
George -
Business partner replication from ECC to CRM
Hello community!
I need help with business partner replication for financial services from ECC 6.0 to CRM 7.0 using standard intagration scenario BusinessPartnerReplication from XI Content SAP ABA 7.0. Scenario type is asynchronous ABAP Proxy to ABAP Proxy.
I activated proxies on ECC and CRM side as described in blog: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ECC, CRM, PI systems are registered in SLD.
And also i created configuration scenario based on BusinessPartnerReplication scenario from XI Content SAP ABA 7.0 and all necessary configuration objects.
The thing that i cann't find:
What standard function modules from link below should i activate on ECC sender side and CRM receiver side in transaction CRMC_BUT_CALL_FU for my replication work?
http://help.sap.com/saphelp_crm50/helpdata/en/96/3c8942ecd55551e10000000a1550b0/content.htm
Thank you in advance, DzmitryThe list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
BR,
Dzmitry -
Problem in customer replication from ECC to CRM
Hi experts,
When I create a customer in ECC using Tcode XD01 a BDOC is created in CRM. But this Bdoc shows following errors:--
Partner (): the following errors occurred
Incorrect input data:
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
When I see the Bdoc message body the data(central data etc )is all blank except the field Object = BUSINESSPARTNER.
Why the Bdoc messae is not getting populated with correct value?
Also how I can see the data which is being sent from ECC. Is there any Idoc or something created at ECC outbound side where I can see the sent data?
Where in XD01 bdoc message is being created?
Please help.
Regards,
VimalHi Vimal,
You'd need to debug the FM CRM_BUPA_MAIN_VAL to find out what was the cause of validation error. Once you get the missing details, check if those details are being populated correctly at ECC end.
Thanks,
Rohit -
Business Partner replication from ECC to CRM based on Company code
Hi:
I got this requirement where we need to transfer customers from ECC --> CRM. Customers specific to a company code.
Trying to maintain Filters for CUSTOMER_main--> KNB1- BUKRS to filter customers by a certain company code. I get this error " Table not maintained in smoftables."
Checked table " SMOFFILFLD" to see there are no entries for KNB1.
While I could check with my superiors on restricting transfer of customers based on Sales area data, as KNVV and KNVP data is maintained.
I would like to know if I can proceed with adding new table KNB1 to this table. If this is not recommended kindly suggest one.The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
BR,
Dzmitry -
Replication of Material Changes from ECC to CRM
Hi All,
I had selected deregistration for R3A* queue from the queue list using tcode SMQR. From that time I am unable to see the material master replications from ECC to CRM.
So, again I selected registration for R3A* queue from the SMQR. Even now I am unable see the replications.
Please can any one help me.Hi
Do you get any sysfail in the inboud queue (and / or a dump in st22)?
Do you get any errored bodcs?
If yes which error message ID and Number?
Best regards
Christophe -
Replication Z-Tables from ECC to CRM
We have a client with some Z-Tables in ECC and we need to replicate this tables in CRM, anybody have any information about this.
Thanks in advanced
SebasHi Sebas,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
You can also try this
1. Create the Ztables both in ECC and CRM
2. create customizing adapter objects in R3AC3.
3. copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code. load object in R3AS.
4. create a variant and shedule the based on requirement
Thanks and regards,
Madhukar Reddy -
Replicating Quotation overall status from ECC to CRM
Hi,
we're using quotation management replication scenario A in ECC6 and CRM 5.
when the quotation is referenced to sales order in ECC, the overall status becomes "completed" in ECC. but somehow, the overall status of the quotation in CRM remains "not processed".
is there anyway i can get the overall status in ECC replicated to CRM for Quotation Management?
Regards
JDHi Susana,
i got reply from SAP mentioning that this is standard behavior. unless i replicate the referencing sales order document from ECC to CRM, then the CRM quotation system status won't be set to completed whenever it is referenced to sales order in ECC. we do not have any business need to have the sales order in CRM, but that's the way it is.
Regards,
JD -
Downloading Material Master data from ECC to CRM
Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.
Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components SAP Products Basic Settings Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management Transactions Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty -
Transfer z-table data from ECC to CRM via Middleware
Hi,
I need to transfer some z-table data from ECC to CRM using middleware. Does someone have any tip or reference link?
AndréHi,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
Regards,
Susanta -
Stop sales order replication from CRM to R/3
Hi friends,
How can we stop the sales order Replication from CRM to R/3? Pls Guide me.
Thanking u in advance.Hi Madhu,
You can do by making distribution lock set in further statuses of the CRM sales order.
It will stop replication of CRM sales order to ECC.
Regards,
Madhu -
Replicate sales orders from ecc to crm
Hi experts,
We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
thanks in advance
AndyHi,
To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
You can search the forum for a detailed document with special focus on the integration points.
Also have a look at the following SAP HELP link:
http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
Hope this helps.
Thanks,
Samantak.
Maybe you are looking for
-
I try to run the ausp dbtable. with entries of object: 00001019680 and more that 1300 entries Inter char. sr_code classtype: z01 the problem is display in a short dump with this message There is no help text for this runtime error either the text was
-
Upgrade from CS2 to CS5 will not connect to Elements 5.0 "catalogue" files.
Until now, I have been seamlessly using CS2 as my Photoshop Editor which was accessed through the Photoshop Elements 5.0 Catalogue function. Within the Elements catalogues, raw or processed photos were acquired to Photoshop CS2 by left clicking the
-
Macbook Aluminum falls a sleep suddenly
Hi, since yesterday my Macbook falls suddenly asleep. It is plugged into the charger and I don't close the monitor. Just very suddenly it falls asleep. Could somebody explain me why is this happen? I checked the energy saving options and if the compu
-
OIM_910_VmWare0 with weblogic
hi friends.... we are successfully went through the OIM_910_VmWare0 with application server jboss which is already in the vm.But we got stucked when try to use weblogic instead of jboss ;we installed weblogic 10.3.3 and try to install oim on that;but
-
i want to update my macbook pro, but it's showes always the installation failed and i should contact the software manufacturer for assistance. i want to update my OS X 10.8.4