Order reservation should not get planned in mrp run

Hello friends,
Actually for a finished material i have created one production order by CO01.Because of it for semi finished material system created order reservation.I dont have any stock of semi finished material.Now i want while running the mrp run system should not planned this Order reservation of semifinished material.For these in configuration of availability check (Scope of check T.C OPJJ), I made the settings that system should not consider reservation (i deactivated the tick for include reservation) and for include depend reservation , i selected Donot check.And all these settings i made in checking group 02 and checking rule PP.After doing all these settings than also system is considering the order reservation for semifinished material and generating the planned order for it.
Do i need to do any other configurations?
Thanking you guys in advance.

Hi Jitendra,
Checking Control (OPJJ) has no relation with MRP.It is useful in the case of Plan and Production / Process Order only to find out Missing part.
Now come to MRP again.
You have a choice of only 3 type of stocks to include or exclude them during MRP run while rest of the things like (PO,PR,Reservation etc are consider by default)
Go to OPPQ and after selecting Plant go to Available Stock.You will find that options,
- Stock in Transfer
- Block Stock
- Restricted Stock.
And one more thing Reservation is not a available stock but its one kind requirement and if there is no stock then system will activate the Planning file entry and during next MRP run it will generate Planning proposal also.
Regards,
Dhaval

Similar Messages

Process order should not take part in MRP run

Hello Colleagues
I looking for a way how to exclude not released process orders (we have PP-PI) from MD04 report. Not released process order should not take part in MRP run. I was trying to do it using OPJJ for availability check 02 and checking rule PP but I was not able to get result. Could you please help, probably there are other settings?
Best Regards
Eduard

Hi,
Settings in OPJJ will take effect only when you create or release process orders.
As a work around you can try to exclude process order is
1. Create a Storage location and make it not relevant for MRP-OMIR
2. In Material master for the material in MRP assign storage location MRP as 1 (exclude storage location stock)
3. Create the process order, in the GR tab enter the storage location (not MRP relevant)
In the MRP run it will not take the process order into account.
After releasing change the storage location to the normal sotrage location.
In this process flow, the control is with the storage location.
Check it in your sandbox.
Thanks,
JK

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Demand not getting generated on MRP run.

Hi All ,
We have an trouble ticket. For a particular sales order , the user has run the MRP , but no planned order is generated . So she cannot convert the planned order to production order .
When she tries to create a production order with T-code CO01 , She gets the error message ," Sales order does not allow Make to Order production"
Diagnosis :- Sales order entered is not to be included in Make to Order Production.
System response:- Account assignment can only be carried out with sales order created with requirement type for Make to Order production.
Please note :- We have many other production orders running for the same material in the same plants for different sales order . There is no problem with them except this sales order.
Following are the details for the material :-
Planning strategy:- 25
Procurement type :- E
Kindly advise . Thanking you.
Kind Regards
Ayaz A Khan

Dear,
Are you getting Message no. 61155?
In particular, the above-mentioned error messages are displayed if a planned order is not assigned to a sales order but the sales order number or the sales order item is not yet known when the account assignment data of the planned order is checked.
Check the requirement type in sale order and account assigment.
Create a production order with T-code CO08 with reference to sales order.
Then please refer this link,
Sales order does not allow make-to-order production

Schedule Lines are not getting generated after MRP run.

Hi,
I have an issue where a SA exists for the parent material with item category L (subcontracting). The parent material has a valid BOM and some sub components as well. I see in CS03 that BOM is fine with validity dates for the parent material. A valid source list also exists for the parent material where SA is present as the source of supply with MRP indicator as 2. Now when i run MRP for the parent material using MD02 (NETCH), with indicators as below:
Create pur.req. 2
Schedule lines 3
Create MRP list 1
Planning mode 1
i don't see any schedule lines in MD04. Instead it creates a PR that too without any source of supply.
In master data for the parent material MRP type is PD with Procurement type F and special procurement key 30. I have checked and every thing seems to be fine still MRP run doesn't create schedule lines.
Any help is appreciated. I can give more info if required.
Thanks.

Dear Rakesh,
Scheduling agreement:An outline agreement against which materials are procured at a series of
predefined points in time over a certain period.
1.For this you have to first use ME31L for creating scheduling agreement and then ME38 for maintaining scheduling agreemnet
schedule.
2.Ensure in the source list after maintaining the material,vendor combination the setting for MRP relevancy is set to 2 - Record
relevant to MRP,Schedule line generated automatically.
Moreover you have to use value 3 for delivery schedule line which is one of the MRP control parameter while taking MRP run.
So for the materials for which scheduling agreement exists,schedule lines will be generated.
Check and revert back.
Regards
Mangalraj.S

PR,s not getting generated after MRP run

Dear All,
I'm running MRP through MD51 for WBS element where RM's are attached to WBS.
It is MTO scenario where no stocks of RM's are maintained. I have checked all relevant settings of Masters.
After running MRP through MD51, system is not proposing PR's for RM's but when i run the MRP for independent FG (MD02 & MD03) system is proposing PR's.
Please suggest & help.
Thanks in Advance.
Shaiz

Little confused on your statement
System is not proposing PR's for RM's but when i run the MRP for independent FG (MD02 & MD03) system is proposing PR's.
I would like to Know, whether the FG is attached with WBS or RM?

Release PR Should not get deleted in md51,planning mode 3

Hi all,
We are facing a problem in MRP run taken through transaction code MD51. This Problem (as explained below) will occur when MRP control parameter for Planning Mode will be set to u20183u2019 (Delete and recreate planning data).
During normal course, if MRP control parameter for Planning mode is set to u20183u2019, system deletes all open PR & Planned orders & creates new PR & new planned orders.
But in our business scenario, where we have release strategy for MRP generated PR, even these released PR get deleted. This results in re-analysis & releasing of MRP generated PR which itself is a tedious & time consuming task.
We are looking for a solution where PR will not get deleted during MRP.
Thanks
Sukumar
Edited by: skumar kalame on Nov 10, 2008 1:59 PM

Hi,
The planing time fence is maintained in MRP-1 view of the material in workdays. You can also have this defined in the MRP group. But the value in material master takes precedence over MRP group.
Use - It is a kind of safety fence which is used to protect any automatic changes to take place for firm order proposals during MRP run.
Depends on - Firming indicator needs to be maintained for the MRP type. This can be set in customizing for the MRP Type. This basically specifies how you want to firm the order proposals. Please note there are 5 types of firming
The SAP help for firming type reads as below:
firming type 0
The system does not firm procurement proposals automatically.
firming type 1
Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The date of new procurement proposals that are created in the planning time fence is displaced to the end of the planning time fence. These new procurement proposals are not firmed.
firming type 2
Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
firming type 3
Procurement proposals that move into the planning time fence are not firmed automatically by the system. All procurement proposals that are necessary for requirements coverage are displaced to the end of the planning time fence.
firming type 4
Procurement proposals that move into the planning time fence are not firmed automatically by the system. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
If helpful award points
Regards,
Vivek

Production Order created from Planned order qty should not be changed

Dear PP Gurus,
IKindly give your valuable inputs on the below mentioned subject.
From MD04 planned order is converted to production order user should not be able to reduce the requirement quantity below Production Order quantity.
Thanks & regards,
Shanmugam Balamurugan

Hi,
This is common problem. to control this you need to develop an user exit . This exit will check the fixed lot size in material master and will compare with the quantity of production order. The exit will get fired at the time of order saving.
If any miss-match happens system will give an error message
Regards
Amit Parkhi

While creating sales order stock should not go under reserved block,

While creating sales order stock should not go under reserved block,
What is the customization?
Please help me.

Hi,
What exactly is your requirement?
Can you be a bit more detailed?
Thanks

Requirement: Insp lot of self Certified material should not get skipped

Hi Gurus following is req pls suggest me
Requirement: Insp lot of self Certified material should not get skipped
if there is a change in Material Revision. As of now Auto Usage Decision
takes place on Self certified material Lots. This happens even after
there is a material revision. This is undesirable as QC is Not able to
ensure the implementation of design changes.
Apps

i have understood the following from ur reply
new revision created by design- purchaser creates po- materials comes in quality - auto skip
quality don't come into picture in ur scenario
solution :
new revision created by design - while creating po they will get error q info record for new revision not present- intimation to quality for creating q info record - decide whether to insp or skip it - normal process
use of q info record
in material master maintain control key for q info record.
create q info record for material, rev, plant , vendor
keep rest evertthing as it is - as a normal procedure material will be skipped
when any new rev is created - while creating po they will get error q info record for new revision not present- QC will get intimation regarding this new rev. -after all approval u can create q info record for this new rev. and then only purchaser will be allowed to create po.
make necesary chages in plan after every new revision

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Excise invoice should not get created without PGI

Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T Saravanan

Dear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi

Excise Invoice should not get created without J1ID data for all material

Dear All,
We have a requirement that excise invoice should not get generated unless chapter ID data is maintained for all the materials in the invoice.( when there is more than one item and chapter id is not maintained for all the items)
At present excise invoice is getting generated for single item which has chapter ID maintained and the items without chapter ID data are left out from the excise invoice. This results in an incorrect invoice.
We want to ensure that excise invoice is not created, unless all the items in the billing document have chapter ID maintained.
Kindly advise as to how this can be done.
Regards,
T Saravanan

Dear Muralidhar, Lakshmipathi,
Thanks for the solution.
I have been able to solve the problem using the user exit mentioned by you.
Regards,
T Saravanan

I bought iTunes Match; nonetheless, on iTunes Radio I routinely get ads. Apple says that with iTunes Match one should not get ads. Whaddup?

I bought iTunes Match; nonetheless, on iTunes Radio I routinely get ads. Apple says that with iTunes Match one should not get ads. Whaddup?

Requiring Match to be switched on, even though we have paid, to get ad free Radio can be costly. Why?
Because if you want to listen to Radio with cellular data (not much data required) you are also agreeing to Match over cellular which can suck data like you won't believe.

Order QTY should not exceed than reference document

Dear Gurus,
I am creating a Release order with reference to Contract. Ex. order qty is 100 in Contract, while doing sale order it should not allow to change the order qty more than 100 [not more than Ref. document qty]. I have tried in VTAA, completion rule.. but it still allows.
Pls thro some light on this.
Regards
Praveen...

Hi Sreebha,
DO NOT COPY PASTE OTHERS STATEMENT
Check the below link from where it is copied:[Lock Quotation Changes when Sales Order is already Created;
Regards,
Amitesh Anand

Order reservation should not get planned in mrp run

Similar Messages

Maybe you are looking for