Order Status says "Page Currently Not Available"
It has been working for me ever since Thursday. It hasn't said anything but We Received Your Order and We Are Processing it or whatever, but at least it came up. Is it down for everyone else?
Ok thanks, i wan't really worried about it because *611 said it was shipped, but thatnks for telling me. I haven't got my shipping email yet
Similar Messages
-
read destricpton
I have a PowerGen 8400mAh External Battery Pack that my family and I have used on many occasions to charge the 3 iPhones we have. (2 iPhone 5 and a 4s). I discovered this past weekend after going on a 40 mile bike ride that my trusted battery will no longer work after I updated to iOS 7. I use an Apple lightning cable to connect the battery but get "This accessory may not be supported" message after plugging it in. Why is Apple making many once supported accessories obsolete? This external battery has been a life saver on many occasions. It may be time to make the switch to another smart phone if Apple keeps this up.
-
Under purchased items in the APP Store, it say that the item you have requested is currently not available in the US store. The item in question is Mountain Lion OS X which I have already paid for. Any ideas to retrieve this?
When you submit a podcast you should get an email acknowledging the submission. If you subsequently submit it again you will get an error message saying that it's already been submitted.
It then has to be assessed by a real person, which can take some time - a couple of weeks seems to be common, but it can be longer: however since March seems an unreasonably long time.
When it's accepted (or rejected) you should get an email saying so, in the first case giving you a link to the Store page.
More than that I can't tell you: obviously I don't have access to the inner workings of the Store. You could try asking Support, but I have to say you probably won't get a helpful answer. Go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them. -
Each time i order a book, it says "network connection not available". Any tips to troubleshoot?
Each time I try to order a book, it says "network connection not available". Any tips to troubleshoot?
As the error message says, you computer cannot connect to the network.
It is difficult for us to give advice since we do not know your network setup. Try the network diagnostics utility:
Open System Preferences -> Network ;
At the bottom of the window is a button labelled "Assist me", press it, then in the drop down panel press "Diagnostics" and inspect your network status. -
The page you requested is currently not available. Please try again later .
The message occurs, when I try to view a message from my PC. On other PCs the problem does NOT occur.
Original message:
" The page you requested is currently not available. Please try again later ...
If you have questions, please send email to [email protected]
For more information on the Oracle Collaboration Suite features, please refer to Oracle Technology Network"
Pls help.
Borys Luberais this related to collab suite. if ys pls post in collab suite forum. this is reports forum
-
I'm having trouble with the purchase of currency in the game Casyle Clash locks! In order status says "Back" returns so what? Money at stake so I have not returned!
You need to contact the developer of the game, or, the iTunes store support. iTunes store "MIGHT" issue a 1 time refund. If you want the credits for the game, talk to the game creator.
-
I'm trying to purchase an album via iTunes and I keep getting the message:
"Purchase of this item is currently not available. This item is being modified. Please try again later."
What does that mean? Why is it listed in the store if it's not available? When will it be available?
iTunes 10.7.0.21
Thanks.It means it's being modified, try again later.
Sorry, but which part of that do you not understand?
Perhaps they're changing the price, so while they are doing that, you cannot buy it. It'll save you moaning later that you bought it and then the price went down. Or perhaps they've found that the album is faulty and so it has been removed until they can upload a non-faulty version. In either case, it will be available when Apple are ready to make it available. No one here knows when that will be.
Wait 24 hours and try again. If no luck, wait another 24 hours and try again. Obviously, Apple would prefer you to buy the song from them, so that's why it's still listed. But it's up to you how long you wait before deciding that you've waited long enough and you simply buy the album from another store. You have that choice, it's not compulsory to buy from Apple you know. -
The Managed Metadata Service or Connection is currently not available.
I've been trying to create new Managed Metadata services but get this error when trying to manage them:
The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator.
I've checked that the application pool that the Metadata service uses is running and that the account it's running under is in the farm administrators group. I've checked that the WCF hotfix is applied on the system by re-downloading KB971831 (I have Windows 2K8 SP2) and trying to run it again but it says it doesn't apply to my system (as I had installed it before installing SharePOint)
I'm not sure what else to do - can anyone give any pointers?
ThanksI've got the default one working again now, the new one "TM Metadata" has been added but shows the same error on the management page.
I have some info from the logs:
Failed to get term store during cache check for changes. Proxy 'TM Metadata'. Exception: System.ServiceModel.ServerTooBusyException: The HTTP service located at https://localhost:32844/SecurityTokenServiceApplication/securitytoken.svc is too busy. ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable. at System.Net.HttpWebRequest.GetResponse() at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace: at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason) at System.ServiceModel.Channels.HttpChannel...
01/06/2010 15:38:18.98* w3wp.exe (0x123C) 0x079C Office Server Taxonomy ch90 Monitorable ...Factory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at Syst...
01/06/2010 15:38:18.98* w3wp.exe (0x123C) 0x079C Office Server Taxonomy ch90 Monitorable ...em.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustClient.Issue(Message message) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustClient.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustClient.Issue(RequestSecurityToken rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context) at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreat...
01/06/2010 15:38:18.98* w3wp.exe (0x123C) 0x079C Office Server Taxonomy ch90 Monitorable ...eChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress address, Uri via) at Microsoft.SharePoint.SPChannelFactoryOperations.CreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress address) at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.GetChannel(Uri address, Boolean& cachedChannel) at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePo...
01/06/2010 15:38:18.98* w3wp.exe (0x123C) 0x079C Office Server Taxonomy ch90 Monitorable ...int.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a() at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code) at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun) at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyProxyAccess.GetChanges(Nullable`1 rawPartitionId, DateTime sinceTime, Nullable`1 groupId, Nullable`1 termSetId, Nullable`1 changedItemType, Nullable`1 changedOperationType) at Microsoft.SharePoint.Taxonomy.Internal.DataAccessManager.GetChanges(Boolean forAllPartitions, DateTime sinceTime, Nullable`1 groupId, Nullable`1 termSetId, Nullable`1 changedIte...
01/06/2010 15:38:18.98* w3wp.exe (0x123C) 0x079C Office Server Taxonomy ch90 Monitorable ...mType, Nullable`1 changedOperationType) at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges()
UPDATE : I've just gone back to IIS to check the pools and it looks like adding the 2nd metadata store has knocked out the app pool that the SecurityTokenService runs in. -
It says default search not available for this regi...
i installed mobile cleaner...cleaned my mobile now my default search in my nokia browser does'nt work and says default search not available....
please help me as i want my default serch back without formatting the phone...
thanks in advance...Hi asimisrar,
Welcome to the Nokia forum.
Reinstall your current software with Nokia Suite to clear up any bugs that prevent you from accessing your default search bar. Connect your phone to Nokia Suite, click on the green arrow and click on 'reinstall current software'. Hopefully this will fix it and saves you from having to reset the device.
If the above doesn't work though, delete the app by going to Menu > Applications > Press and hold the apphlication and press Delete. Then hard reset your phone, but make sure you make a back up first. Connect the phone to Nokia Suite, click on Tools > Back up and make sure you don't tick the Settings box as this will back up the bug.
Once you've made the back up, enter *#7370# into your phone with default security code 12345, unless you have changed this code yourself. Once rebooted, reinstall the current software as explained above to make sure your phone really is cleaned from any bugs and restore the back up by going to Tools > Restore.
In case the default search bar still doesn't work after doing this, please visit a local Care centre where they can check it out and fix this for you. You can find your nearest Care centre by visiting your local Nokia web page and clicking on the Support tab.
Let me know how you get on so that I can help further, if necessary.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too. -
how can I save a page and all its component parts in a single file, like IE does as an MHT?
It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
Thanks
MGThis is not really an answer just my comments on your question.
I am sure I recollect efforts being made to get mhtml to work with FF.
Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment. -
This site is currently not available... Please try again later
Hi,
I had created a site http://budgie.azurewebsites.net/. I was able to successfully access this site. After a couple of days, I had deleted this site. Now, in my azure portal, I no longer see the web site budgie, but accessing the url gives
me the error "This site is currently not available... Please try again later".
What must I do to completely remove this? I need to recreate this site again with the same url.
I am able to create other azure web sites, and access them.
Thanks & regards,
Samuel Philip
[email protected]
SamuelPhilipJust as the message says, please try again later. This has to do with the fact the Azure hasn't completed purged your website name from their system yet. Besides, the external DNS servers may still holds the name/address reference.
"Nameserver changes can typically take 0 to 24 hours to take effect, but they are known to take as long as
48 hours to go into full effect. DNS zone record changes such as A, MX and CNAME records can typically take
0 to 4 hours to resolve but are known to take as long as
8 hours to fully propagate."
Frank -
Payment processing is currently not available
payment processing is currently not available Postepay
Since Monday, I have been unable to buy music through
iTunes store, as I've consistently got the error
message "The iTunes Store is unable to process
purchases at this time - Payment processing is
temporarily unavailable...please try to make your
purchase later"
I've tried changing my card to a different one, in
case it's a problem with the connection to my bank,
but on the relevant "My Account" page, when I click
to confirm, I again get "Payment processing is
currently not available"
iMac G5 Mac OS X (10.4.8)
Did you manage to reslove this as I'm suffering with the same problem and have been for about a week now?
G4 Mac OS X (10.3.9) -
Hi,
I'm not able to access the term store. I get an below mentioned error.
"The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator. "
Since this is happening on my local machine (Dev environment). I have full control on the term store and the all the site collections.
Hence, this is not a permission issue.
I have checked, the Metadata service is active on the machine. All the application pools in IIS is running.
After reading one of the recommendation on internet, I created a new Managed Metadata Service.
After which I was able access both (old and new) MMS from Central Admin only (highlight the MMS from manage service applications and click Manage ) and not from the site collection (term store management).
Now again its not working after I did an IISRESET.
The managed metadata service (Managed Metadata Service Connection) is grayed out.
ULS Error says:
Failed to create ManageLink for service proxy 'Managed Metadata Service'. Exception: System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout
value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/7a91ec90b46843e995c144be48d804f0/MetadataWebService.svc' has exceeded the allotted
timeout of 00:00:09.9990000. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
Please let me know if you need more information.Hi Victoria,
Thanks for your reply
I tried making all the changes you had recommended and which are mentioned in the link you have provided.
I tried making all possible combination of changes to the web.config and client.config files but it does not make any difference to the environment.
One thing is that, my error in ULS logs has changed.
Error 1:
Exception returned from back end service. System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted
to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
Error 2:
Error encountered in background cache check System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000.
The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a()
at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun, Double operationTimeoutFactor)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.ReadApplicationSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.get_ServiceApplicationSettings()
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.TimeToCheckForUpdates()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.<LoopForChanges>b__0(). -
Hi,
I am getting below error message while loading photoshop plugin on intel mac os 10.5.7 in photoshop CS3.
"One or more plugins are currently not available on you system. For details, see Help -> System info"
In System info it is giving error as
"Plug-ins that failed to load:
Dissolve NO VERSION - - from the file “/Applications/Adobe CS3/Adobe Photoshop CS3/Plug-Ins/Filters/Dissolve.plugin/”
I have build this code with Xcode v3.0 & selected settings build configuration as "i386".
Is there any CS3 SDK updated need for intel mac or any build settings need to be done in xcode?
Same plugin is working well on emac, but giving above mentioned error on intel mac.
Please let me know if anyone have any idea about this.
Thanks in advance.Thanks a lot for you suggetion.
2009/5/22 Ramón G Castañeda <[email protected]>
If you had been running CS3 on a PPC machine (PowerPC or pre-Intel box)
it's likely the plug-in was not written for Universal Binary.
>
Now that you have an Intel iMac, any plug-ins that have not been updated
for Universal Binary will not run, because your CS3 is now running natively
in Universal Binary.
>
In order to run your older plug-ins, you would have to run CS3 in Rosetta
emulation software—with a corresponding, MASSIVE performance hit..
Rosetta emulates the PPC chip. To set up CS3 to run in Rosetta, you
highlight the application icon in the Finder a do a Get Info on it (Command
I). check the Run in Rosetta box, close the dialog box, launch CS3 and
watch it crawl along.
> -
Save command currently not available
Hi
I have created a Photoshop plugin and it was working fine..Now suddenly I am facing an issue..On execution, I am getting an error "Save Command is currently not available". I have not changed anything in code. I am not able to trace the reason.
Earlier I thought that it is space issue and I vacated memory in my system. But no luck.
Please guide.
ThanksSomething has changed in my functions for doing batch actions in Bridge. In CS5 Bridge I try to do a simple batch action of saving a DNG file as a jpg and closing the file. When I attempt this I get a message saying 'The command "Save" is currently not available.
Batch using tools menu from Bridge to reach Photoshop should work as expected in both CS4 and CS5. If not then there is something wrong on either your system or install.
Go to Bridge CS5 preference and look for the section Start Up Scripts and see if there is still a Start Up Script for Photoshop CS5 present and with a checkmark in front for activation. If not try first to restart bridge holding down option key and choose refresh preferences. This should retrieve the original Start Up scripts again.
If your command save as is not available check the action and see what the save path for that acton is. If it is a copied action from an other system changes are that it still contains the save path for the old drive and if the script can't find it it provides a warning message.
Also check if the drive you save to has both read and write permission.
Maybe you are looking for
-
I formerly used Zune, which i find much more user friendly than iTunes. I bought most of my music through that program, but have since tried to import the files to iTunes so i can put them on my iPhone. All of the files have the iTunes icon & under p
-
REQUEST GOP / UEFI BIOS for MSI R9 270 GAMING
Hi there! Could I get the latest UEFI GOP VBIOS for MSI R9 270 2G GAMING please? Serial number: 602-V305-03SB1401002324 Current VBIOS: _https://drive.google.com/file/d/0BzVByGARY8OCNXZBTXpMLVJaems/view?usp=sharing (without _) Many thanks
-
Deleting queued email notifications in SCSM 2012
Hi, We have disabled the email notification channel in SCSM 2012 and the workflows which are used to trigger the email notification were running. Now, we need to enable the notification channel. But, we suspect that all the old emails which are queue
-
Oracle Database 10.2.0.1 compatibility with Workflow 2.6.3
Hi All Does anyone know if workflow 2.6.3 is compatible with database 10.2.0.1? If not then which workflow version is compatible and where I can download from? FYI, my system is Windows XP Pro ver 2002 SP2 Thanks.
-
Using Boot Disk with external monitor?
Does anyone have any idea how to boot from the OSX install disk while using an external monitor? My powerbook screen and HD are both busted and I can't install the OS on the new HD. I can get to the point where it has booted up and is using the exter