Order the recovery DVD's from HP

Hello,
My System has been crashed and I dont have recovery DVDs with me
Product Model: XV699PA
Product Name: HP Pavilion dv6-3123tx Entertainment Notebook PC
Product Serial Number: INA050QK18
Request you to please let me know the Recovery DVDs so that I can install W7 to have running laptop.
Please help ASAP.
Rgd,
Shrinath

Hi,
You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

How to use the recovery DVD's

Hello,
I have the Hp Pavilion Dv3-4305se, which has the Windows 7 home premium 64-bit Edition.
I have the revocery DVD's but i didn't know how to use them.
1-the F11 doesn't work. it doesn't give me HP recovry, it direct me straight to the users page.
2-when i used F9, it says that no Disc was found.
And those DVD's worked before, i tested them before i got them from HP supprt center in my country.
Please help.
Regards,

Hello,
Yes, i tried those steps before, but it doesn't work.
You need to know that my recovery partition stopped working, and i had to order the recovery DVD's.
And in the main while i installed a hacked Windows 7 proffessional instead of Windows 7 premium.
and the ive got 3 recovery DVD's each one is a CD of 8.5 GB.
I hope those informations would help you to understand the situation that i have been suffering from for 2 months eactly.
Regards,

System restore and formatting from the recovery dvd

initially i had only one drive but after partioning it to one more drive. i had along with the onekey recovery probelm i had system restore unsuccessful problem and also with the recovery dvd, it doesn't give option to choose drive to format, it start formatting the whole system. any solution to these?????

rajesh,
The recovery DVD you use makes the default partitioning scheme that your system obtained from the factory.You cannot make custom partitions with the recovery dvd set
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

How do I reinstall OSX if I lost the recovery dvd?

How do I reinstall OSX if I lost the recovery dvd?

You can't. You can purchase replacements from AppleCare. You can purchase a Snow Leopard DVD at your local Apple retailer, too.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.

When can I order the new iPad Air from the online store?

When can I order the new iPad Air from the online store

go to the online store and it will tell you November 1.

Stop the Apple DVD Player From Playing

Hi Gang
Is there a way to stop the Apple DVD player from automatically opening everytime a DVD is inserted in the drive?
Thanx

http://discussions.apple.com/thread.jspa?threadID=1529667
hpr3

NB500: How to use the Recovery DVD without a DVD drive in the netbook?

Background:
I have a Netbook NB 500 which came with a Win7 Starter. I upgraded to Win8 but didn't like it as the screen resolution wsn't high enough to open Apps. As the system became slower and slower over time, I decided to reset the unit back to original settings using the Win8 function.
The progress on this process was extremely slow and after seven hours (about 60% done) I got a fright that the content of my HDD might be copied somewhere onto the web (NSA cloud? :) ) .
I switched the unit off and from there nothing would work anymore. I bought recovery software with WIN7 Starter from Toshiba Support as I couldn't find an ISO file for WIN7 starter, but it arrived on a DVD...
I do have:
+ NB 500
+ Toshiba Recovery DVD
+ Bootable USB stick (I created this)
+ Product Key for Win7 Starter
Question:
What files are necessary in order to install Win7 from scratch (move files from DVD to bootable USB stick)?
Will this procedure delete the old data from HDD or will it still take up space?
Regards
LS1-d

It is not simply as you think it is. As far as I know you cannot manipulate recovery data and work on your own bootable media.
Best and simplest way for you is to obtain somewhere external USB ODD and use it for recovery image installation. I have NB520 and I have bought external BD ODD and can use it for different actions like software installation for instance.
Im really wondering you didnt create recovery USB stick. It was my first step after I bought this machine. Product key that you have on Microsoft sticker is useless. You cannot use it for OS installation if you use own OS version and you dont need it if you use original recovery image.
After recovery image installation preinstalled Windows version will be properly activated.
> Will this procedure delete the old data from HDD or will it still take up space?
Yes. The whole HDD will be deleted so before you start with recovery image installation back-up all your important data.

Can I Create The Recovery Disk(s) From The Recovery Partition? Can I Copy The Partition?

I searched the forums to find an answer to this question, but was unable to find one. It seems to me that it might be useful info for others trying to create Recovery CD/DVDs from a failed hard drive that still has an accessible Recovery Partition so hopefully we can figure out a solution. :-)
I have a Pavilion dv9408ca (Vista Home) with a hard drive that won't boot. I removed the hard drive and was able to read it on another system. I was also able to to create a Virtual Machine and run it so I recovered all the important data. I installed it in an external drive case and tried to boot from it but I wasn't able to access the Recovery Partition (F11 option didn't show and didn't work), and Windows wouldn't load.
It's possible that the controller is the problem so I don't want to buy another hard drive yet. I would like to format the original hard drive and create a 'factory' system but I don't have Recovery CD/DVDs. I cannot create the Recovery CD/DVDs using the Virutal Machine (I presume it's because it's not running on an HP).
The dv9408ca can boot form the DVD drive (ran UBCD, etc. and they booted fine).
Can I copy the Recovery Partition and make a bootable set of CD/DVDs by using some other program or copying the files/folders? I have CD/DVD burning software (Nero) that can create bootable CD/DVDs. Or can I use the Virtual Machine to run a program that will do this without using the HP Recovery Manager software in Windows?
Or... Can I create a set of Recovery CDs from another Pavilion Notebook (different model but same Vista OS) and use those to format/recover the dv9408ca system?
Thank you for your help with this problem.

peter_hp wrote:
Or... Can I create a set of Recovery CDs from another Pavilion Notebook (different model but same Vista OS) and use those to format/recover the dv9408ca system?
This is only option which might work for you provided the product number of other laptop matches with your existing system Else you can order a set of recovery disk for your Notebook(dv9408ca) from here for a nominal charge.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Problems exporting and playback the MPEG2-DVD videos, from .MP4 file!

I have PremiereProCS4 v.4.2.1 installed on this PC:
OS:WindowsXPProx64Bit; CPU:IntelCore2Quad Q9650; RAM:4GB DDR2 PC2-6400 Kingston; HDD:3x500GB WestrnDigital Caviar Green; VGA: Sparkle GeForce 9400GT 512MB.
I have downloaded an AVCHD file .MTS 1920x1080p 25p, made by Canon HF100 AVCHD camcorder, from this source (.rar file):
http://www.megaupload.com/?d=RWR5MNYHhttp://www.megaupload.com/?d=B9ZDX2RZ
The videos in question called: "25pf_1.25_f1.8.MTS" playback and export from Premiere as MPEG2-DVD very well.
I playbacked it on Premiere on the second Monitor as "OutputDevice". All Ok.
I playbacked also the DVD made with EncoreCS4, on the external DVD set-top-box-player. All OK.
I downloaded also another clip 1080p 25p, converted as .mp4, from the same author, imported then in Premiere with Preset "XDCAM EX 1080p 25p" (470MB) :
http://www.megaupload.com/?d=B9ZDX2RZ
No problems with playback.
Exported as MPEG2-DVD PAL "Lower Field First".
Opened in NeroShowTime Player: the video have a serious interruptions of the playback, some moments plays back-and-forward, and it isn't fluid at all!
I tried to create a DVD with EncoreCS4 and played it with DVD Player set-top-box, and the result is bad, and is the same as the playback on my PC with NeroShowTime Player. It present the back-and-forwars interruptions.
I tried also to create an AVCHD Project 1080p 25p and import the .MP4 file, but the problem persists !
After exporting them, and played-back on NeroShowTime and on Set-Top-Box Player, the video have strange behavior, and plays back-and-forward!
1) What Preset in Premiere should I use to editing, for this .MP4 file format, (filmed with Canon HF100 AVCHD and converted from original .MTS format to .MP4 format)?
2) Is this a transcoding problem?
3) Is this an exporting MPEG2-DVD PAL field-order issue?
This is my bad exported MPEG2-DVD converted file, available for downloading:
http://rapidshare.com/files/337858976/Canon_HF100_1920x1080p_25p_01_AVCHD25p.m2v.html
Strange! With .MTS files I haven't any exporting problems at all!
Please response me hurry!
Many Thanks!
Horsepower.

OK! Sanyo use a bad format.
But about JVC GY-HM100 Professional:
I know this model very well!
It records to .MP4 XDCAM_EX at the same manner of Professionals Sony Camcorder such this: Sony XDCAM_EX model "PMW-EX1" price €6.478,80.
This JVC GY-HM100 camcorder is not tha same as Consumer JVC camcorders.
It doesn't record MOD or TOD files.
It records .MP4 files editables in Premiere with XDCAM_EX "Preset"!
See those details:
http://pro.jvc.com/pro/attributes/HDTV/manual/editing1.html
http://pro.jvc.com/pro/hm100/content.jsp?model_id=MDL101845&attributeId=2&feature_id=02
See also this page:
http://pro.jvc.com/pro/hm100/content.jsp?model_id=MDL101845&attributeId=12&feature_id=12
The first Brochure called "A Guide to the Most Efficient Workflow with ProHD
(6 pg brochure)" explain very well the .MP4 - XDCAM_EX format and the Editing process that should be with Adobe PremiereProCS4.
I have inspected the downloaded .mp4 file in question, and GSPOT v.2.70a reading this:
-CONTAINER:
     isom: MP4 Base Media v1 [IS0 14496-12:2003]
-VIDEO:
     CODEC:avc1
     NAME: H.264/MPEG-4 AVC
-AUDIO:
      CODEC: mp4a: MPEG-4 AAC LC
1c) Is this an AVCHD video codec?

The recovery DVD and the driver CD

I assume if a complete drive failure occurs, that this DVD (which indicates Lenovo recovery DVD) and the CD (which indicates drivers) can completely restore the system to factory default if the hard drive was to be replaced.
Currently, I know using the one touch key (or F2) during the Lenovo boot up screen activates a complete recovery, but this works only if the hard drive is working.
What if a new hard drive, is a one touch done with the DVD in the drive?
I have booted off the DVD before, without hitting the key, this method just activates Windows Vista install menu.
The 330MB system backup and restore software that can be download only "backups" the current windows install condition or only restores a previous backup, neither of which is the factory default. If using this backup/restore software and telling it to access the DVD to look for factory default, it doesnt indicate a "backup" is on this DVD, nor can it find a previous version on C or D hard drives. So I am curious to how the system can be put back to factory status if the hard drive is replaced and a backup isn't performed using this software of which has to be downloaded and installed. If a system crash, I would not bring back to current conditon, I would rather start from a fresh factory restore.
Thanks.

the recover dvd which contains vista will install all the software that came pre-installed with lenovo systems .
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

How do I convert a VLC file to imovie. I have managed to download the mini dvd disc from the video camera onto a USB and have saved the file on my desktop but have no clue how to get it into iMovie so I can edit and send via email. Any ideas!!!

How do I convert a VLC file to iMovie.
I've managed to download the mini dvd from the video camera onto a USB and have save onto my Desktop.
But have no idea how to convert to iMovie so I can edit and attach video to an email and Facebook.

Edit WMV
http://www.microsoft.com/windowsxp/using/moviemaker/getstarted/default.mspx
and http://www.microsoft.com/windows/windowsmedia/forpros/encoder/default.mspx
Also... I have NOT used those products, I only forward due to other mentions
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
$99 http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
$99 http://www.womble.com/products/mvw.html
$80 http://www.nchsoftware.com/prism/index.html
$75 http://www.videoredo.com/en/index.htm
$75 http://www.magix.com/us/movie-edit-pro/
$70 http://www.nchsoftware.com/prism/index.html Converter
$40 http://www.daniusoft.com/dvd-ripper.html#135
$40 http://www.deskshare.com/dmc.aspx Digital Media Converter
$00 http://www.squared5.com/ MPEG Streamclip Converter
$00 http://www.erightsoft.com/SUPER.html Multi-Converter
$00 http://www.virtualdub.org/ Mpeg to AVI Converter

Can you put the small DVD discs from a camcorder in the DVD slot of the iMac?

Stupid question...can you put the small DVDs from a camcorder in the DVD slot of the iMac?

That could be a challenge. If I am not mistaken that camera strictly records to DVD - RW and has no digital output connectors, is that right?
My only experience with a camera like that was a bad one. I was able to get the video off the disc using a tray-loading iMac but it was painfully slow.
iMovie (for example) is designed to work with camcorders such as those specified in this reference:
http://help.apple.com/imovie/cameras/en/index.html
I cannot find the DCR-DVD92 in that database
You might consider finding an external USB slot-loading DVD drive, but as I say my experience was painfully slow, and you might run into file format compatibility challenges.
I am sure it's possible but it won't be as easy as importing video from something like an iPad or iPhone. I still use a camcorder on occasion but it has a FireWire port. That's easy.

When will I get the recovery DVD?

I have ordered a " Item TR-IM00103870 - hdd image for PSAJ4E-00S00RTE " via " https://backupmedia.toshiba.eu/ " and I got an e-mail which says that I would be informed before the DVD is shipped.
I ordered it on 26.09.2009 and its 01.10.2009 today.
Still no word. Is that normal? Will it ever be shipped?

Hi!
I didnt order a reocvery disk from Toshiba directly as yet because I always burned the disk myself but have you contacted Toshiba already?
I think they should be able to say when disk will be shipped.
Write a short e-mail and wait for an answer.
Good luck!

Can I use Product Recovery DVD-ROM from other unit for my Tecra A2?

My Tectra A2 has become so corrupted that I want to put it back to whn it was purchased. I can't find the Product Recovery DVD_ROM that came with it. But I have got the Toshiba A60 Product recovery DVD_ROM.
Are they all the same or do I need the exact DVD_ROM for the TECTRA A2?

Hi
The answer is no. every recovery image is created separately and contains drivers for specific hardware infrastructure. Better way is to use Microsoft installations CD and later install all drivers, tools and utilities alone. All this stuff you can find on Toshiba download page.

How to erase the "untitled dvd.fpbf" from my finder?

can you help me to get these out?(those three that located in the left)
it's annoying..
hahaha
thx before..

Hold down the Command key and click and drag them out of the side bar. They will dissappear in a puff of smoke.
OT

Order the recovery DVD's from HP

Similar Messages

Maybe you are looking for