Order to stop and start Replication

Hi All,
We have bi-directional replication using streams.We want to stop and restart it .
Would you please help me in deciding the order of different queues(Capture/Apply/Propagation)
Thanks in Advance!!!
Kind Regards

First stop propagation. - no more messages sent.
Then stop capture. - if no messages were sent then there should be none to capture.
Then stop apply. - and if nothing is captured then there is nothing to apply.
When restarting reverse the order.

Similar Messages

Order of stop and start of reporting services

Hi All,
I am using 11.1.1.3 version in my laptop,i want know the correct order of stop and start the services,please help me on this.
Thanks
Hypuser

The full order list can be found at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s02.html
Cheers
John
http://john-goodwin.blogspot.com/

Why does Image Capture stop recognizing Epson scanner after scanning several images? I have to stop and start the scanner in order for Image Capture to recognize it again.

Why does Image Capture stop recognizing Epson scanner after scanning several images? I have to stop and start the scanner in order for Image Capture to recognize it again.

Karen ...
Might be corrupted preferences (.plist)
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.image_Capture.plist
Click Go then move the com.apple.image_Capture.plist file to the Trash.
Restart your Mac and your scanner and try scanning an image.

DVD will not stop and start in a Menue Mode

Hello I am using DVD Studio Pro 4 for a school project and i am looking for some help with this problem.
The DVD i have created plays and stops when i am watching one of my video tracks, i just can not start the DVD when i am previewing in any menue after i stop it.
I have created my DVD with 16 menus and 2 video tracks. It burns and plays back fine but i can not stop and start the DVD when i am in a menu mode. The DVD will stop and play when i stop the DVD playing video from one of my video tracks but when i am in menu i push stop on my DVD controller and the DVD will not start back up. The DVD will look like it wants to play but it will not play. I have to open the DVD player tray open in order for it to start the DVD again.
The DVD is a NTSC, SD, single layered 2.9GB
Any help would be much appreciated, Thanks.
Mike
PowerBook G4 15 1.25 ghz Mac OS X (10.3.9)

If only five months old it is still under warranty. Take it back.

How to stop and start MDBs to listen for JMS messages

Hello! This might be more of an architecture question rather than a technical questing, but I post it here, in the lack of a better place...
For several years I have been using Webster and Webster MQ to send messages back and forth to clients. The architecture for the middleware platform has been designed around the functionality of ListenerPorts. Listenerports is a Webster functionality that let you "stop" and start to listen to JMS messages for a given MDB either by admin console, or by JMX.
The arhitecture we used was something like this :
1.Client sends a persistent message to a queue. (order)
2. An MDB pics up the order message, calls a SessionBean that "fronts" the IIOP back end system.
This is quite "out of the box" architecture, but we used the Listenerports to solve a stability problem for our back end system.
The backEnd system was quite unstable, so the EJB threw an exception (typically because of timeout or connection refused) back to the MDB.
The Listenerport was "defined" to handle 3 errors before stopping, so the MDB resent the message twice before the listenerport automatically stopped. The nice thing about this feature was that the client could continue to send orders, and was not bothered when the back end system was down.
When the backEnd system was up and running, we could start the listenerport and it was all back to normal state. We even had a start script that checked the state of the listenerport every 30 minute, and started it automatically if it was stopped, making the admin task of starting the MDB unnecessary..
Now.. Why am I telling this story..
I would like to know how this could be done using "clean" J2EE technologies..That is..Not using any technology that is not portable..
I`m playing with glassfish at home, and it struck me that there is nothing in the J2EE spec that defines the functionality described above ? Am i missing something ?
I Do not want to stop My application because the back end system is down? That is the only way (i know of) that i can "stop" to listen for messages..
I can put all the messages on an error queue when the backbend system is down, but that would lead to more code just to handle the error messages. Maybe the easiest way to solve this is to "move" (programmatically) all messages from the error queue over to the "standard" queue every XX minute, but somehow that sounds "wrong"
Can anyone give me some advice to how this problem situation should be solved ? I`m interested in the solution both from an architectural perspective and from a more technical perspective..
Best regards
Hans-Jacob Melby

Breakpoints, whether normal or conditional, are just meant for debugging of your code. I had the sense from your question that the pausing you want to do is a part of normal operation of your code. I would NOT recommend using a breakpoint for that situation. It would bring up the block diagram showing the breakpoint when it occurs. A user besides the programmer would not know what to do in that case.
Yes, both the inner and outer loops would have shift registers.
Putting a case structure with a small while loop inside the "Pausing Case" is doable. It just depends on what you are doing or waiting for while the program operation is "paused".

Stops and starts in video streaming from iphone to tv using apple tv and airplay.Both devices have latest software and are capable.

When try to stream content (specifically, videos from Acorn.com) to my TV through my apple TV from my iphone 5,The video freezes, stops and starts continually, even though it is playing smoothly on the screen of my iphone. both iphone, Apple TV are capable models and have latest software updates.
What's wrong here?

Not necessarily, but right now you don't have a stable network and there are a lot of factors that can compromise that. I didn't say ethernet was the only option, again you can get a report of your network to see the status. Would have to change things in order to strengthen the wifi signal (i.e. router location, channel,placement of ATV etc). I am running on wireless without issue, same as most users, and if you took it to a controlled environment (like Apple) you would see similar results.

While playing videos on itunes, audio and video will stop and start. It just started doing this recently and it does it with all my itunes videos..help!!

While playing videos on itunes, the audio and video will stop and start several times during playback. This just started recently and it does it on all my videos. Help!!

Try to download the application VLC.
It is a media player that should be able to play any audio or video file you may have. If your videos play flawlessly using that application, then the issue is with iTunes and Quicktime, as they are both essentially similar software types when it comes to playing media.
In that case you may need to install a plug-in file called Perian, in order for the videos to play correctly within iTunes or at least Quicktime...

Waveburner resets (64bit) IK Multimedia plugins when stopping and starting

Does anyone else happen to have this problem:
I'm finding that while mastering, I want to look back at the incremental changes made and have found that the Pultec EQ and some other plugins seem to default to a preset.
In order to get to this problem I did the following:
1 track in Waveburner, added the Pultec EQ,
2 added a limiter chose a preset 'MIX PRESENCE' then got my desired sound.
3 When listening everything seems fine and then you stop and start again, or go back to the beginning of the track by pressing the 'BACK ONE TRACK' button on the transport and all of the sudden the Pultec EQ resets to that original preset.
So not too sure what to do, the only way of getting round this issue was to mix as best as I could, save as a new preset while it was playing and then when hitting start again then while it is playing then I quickly hit the preset on that I made and have to bounce my mix at the same time in order to finally get my desired output which is less than okay.
Can anybody help. I'm running on an iMac, 64bit Version10.6.7 OS and Waveburner is 1.6.1
Many thanks

It is not just IK Multimedia and Waves plugs that are resetting on me; it is also the WaveBurner 'native' plug "Linear Phase EQ" and who knows how many others, were I to begin testing instead of trying to work through this.
This little bug renders this software effectively useless for professional work.
Some of my Waves plugs hold their values, others don't.
Elysia products screwed up too; so much for that demo.
As far as I can tell I am not using any automation, but, is there a way to globally turn off the possibility of automation (I tried RightClicking in the mix lane but there is no choice of automation available there, perhaps 'cause there is none as I suspect)?
I am using WaveBurner 1.6.1.
C'mon Apple, its November already; you must fix this.

Music skips and stops and starts

Hello, we have just got a nano to replace a 3rd gen iPod.
I have around 50 gigs of music on a lacie USB drive, and the music plays flawlessly from here in iTunes.
However once imported into the nano, there is distortion, jumps and clicks in the music and sometimes the song will just stop and start from the beginning.
Any ideas?

Gary,
You chould check out this thread we have going.
http://discussions.apple.com/thread.jspa?threadID=356911&tstart=0
Toshiba Satellite P25-609 Windows XP Pro Media Center Edition iPod Nano 2G (as black as my cold, dead heart)

How may I automatically stop and start Mail services at a set time please

Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
Cheers, David ( a realy newbie when it comes to administering OS X server)

launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
/Library/LaunchDaemons/local.postfix.stop.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
  <key>Label</key>
  <string>local.postfix.stop</string>
  <key>ProgramArguments</key>
  <array>
    <string>/usr/sbin/serveradmin</string>
    <string>stop</string>
    <string>mail</string>
  </array>
  <key>StartCalendarInterval</key>
  <dict>
    <key>Hour</key>
    <integer>1</integer>
    <key>Minute</key>
    <integer>00</integer>
  </dict>
</dict>
</plist>
and /Library/LaunchDaemons/local.postfix.start.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
  <key>Label</key>
  <string>local.postfix.start</string>
  <key>ProgramArguments</key>
  <array>
    <string>/usr/sbin/serveradmin</string>
    <string>start</string>
    <string>mail</string>
  </array>
  <key>StartCalendarInterval</key>
  <dict>
    <key>Hour</key>
    <integer>4</integer>
    <key>Minute</key>
    <integer>00</integer>
  </dict>
</dict>
</plist>
You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?

MacBook Pro hard disk stops and starts

Why does the hard disk on MacBook Pro stop and start every 15 minutes or so? All operations suddenly stop for five to ten seconds during the spin down. I don't recall this happening in OS 10.5. The preference "Put the hard disk to sleep when possible" is NOT ticked, therefore the drive should never spin down.
Any ideas?

Try resetting your SMC. Resetting the System Management Controller >>
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

APEX 4.2 aligning issue of Stop and Start Grid Layout item

My APEX application application is in the process of moving from 4.0 to 4.2. I am experiencing an issue with aligning (left margin justified) of Stop and Start Grid Layout items that have a border around them. Earlier I had an issue with the border itself not showing up in the 4.2 application. I was able to resolve that with a workaround by adding inline code in the CSS section of the page: #P23_OFFICE_START_TBL {width:682; border:1px solid #369; margin:5px;}. This created the border which I needed, but there are 2 Stop and Start Grid Layout items that are indented and not aligning with the border of the previous line. I have tried a number of different things but none of them have worked. This seems like a very simple issue to fix but I am having a tough time resolving it.
I tried to put the item in question in a different grid, which corrected the indention but then I lost the border around the item. It seems that the above CSS code does not work on the new grid. I also tried to put attributes such as margin-left:5px; float: left; clear: left; float: left, in the CSS code but that did not work, too.
Any suggestions?
Thanks
Ajay K

I deleted and added back the Stop and Start Grid Layout items not aligning properly. This worked. Apparently, the 4.0 to 4.2 upgrade did not handle/convert these items properly. Deleting and adding them back resolved the issue.

Burned DVD issues in DVD player not reading or music issues stop and start

I'm a PC converted to a MAC (less than a month) and love it so far. I have been able to create and burn a DVD. The problem I'm having is one DVD player will not read the DVD (Hitachi). The other DVD player will play it, but the music stops and starts when it transitions (twirl) to another picture (Panasonic DVD/VHS combo). I'm using a DVD R Memorex. Neither one of the player are new. Would love to use this to make the Grandparent's a DVD of the grandchildren from birth to present as Christmas present. What do I need to use or do to be able to watch on any DVD player as well as the computers?
Message was edited by: me01

Hi me01
Welcome to apple discussions. Try using 99 photos / less to avoid issues with audio fades / drops. Also do a search for Memorex on this forum and you'll see it's not the first choice of dvd's for most users. Instead try Verbatim, Maxell, or Taiyo Yuden and burn at 4x from a disc image for best results. Wish you luck and feel free to post back with results or any further questions.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Srvctl on 11.2.0.3 does not stop and start listeners

I recently installed the Grid software under the "grid" user on RH5. Clusterware and ASM run under GRID_HOME, the single instance database runs under ORACLE_HOME. I have created 2 listeners on non-default ports (manually using entried in listener.ora) and then added to srvctl (srvctl add listerner -l LISTENER_XPT -o /app/oracle/product/dhome_1 -p "TCP:1523" -- in ORACLE_HOME.
When stopping the listener using:
oracle@#####>srvctl stop listener -l LISTENER_XPT -- note starting with oracle user in ORACLE_HOME. Below is from "/app/grid/product/11.2.0/grid/log/server_name/agent/ohasd/oraagent_grid/oraagent_grid.log
2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:) TNS-00511: No listener
2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:) Linux Error: 111: Connection refused
2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:)Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1523)))
2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check]
**********FROM TAILING THE listener LOG ****************************
TNS-01190: The user is not authorized to execute the requested listener command
12-JUN-2012 12:44:12 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
TNS-01195: Listener rejected registration of endpoint "(ADDRESS=(PROTOCOL=TCP)(HOST=10.5.87.5)(PORT=1523)(IP=FIRST))"
12-JUN-2012 12:50:02 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
TNS-01190: The user is not authorized to execute the requested listener command
12-JUN-2012 15:12:58 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_ADMIN)(VERSION=186647296)) * status * 0
12-JUN-2012 15:12:58 * version * 0
12-JUN-2012 15:12:58 * service_register * LsnrAgt * 1195
TNS-01195: Listener rejected registration of endpoint "(ADDRESS=(PROTOCOL=TCP)(HOST=********)(PORT=1524)(IP=FIRST))"
12-JUN-2012 15:12:59 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=********)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
12-JUN-2012 15:13:05 * (CONNECT_DATA=(SID=PRDRAC01)(CID=(PROGRAM=perl)(HOST=********)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=*******)(PORT=41398)) * establish * PRDRAC01 * 0
Why wouldnt the Oracle user not be able to start/stop a resource from ORACLE_HOME ? Any assistance would be helpful

I just removed the listener out of the ORACLE_HOME and added it using srvctl to the GRID_HOME. Now I am able to stop and start.
Still the question, why cant oracle user start an oracle_home managed resource. But the oracle user could start and stop using lsnrctl stop/start
Below if the results from ps (note I just started listener from GRID_HOME):
grid@PRODBLD:+ASM>ps -ef |grep lsnr
grid 9114 1 0 09:40 ? 00:00:00 /app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER_ADMIN -inherit
grid 10348 1 0 Jun12 ? 00:00:00 /app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER -inherit
grid 20234 21990 0 09:49 pts/2 00:00:00 grep lsnr
oracle 29926 1 0 Jun12 ? 00:00:00 /app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr LISTENER_XPT -inherit

SSRS Report queries begin running slowly, have to stop and start report server to restore performance

We have had a production issue crop up twice now where reports begin running slowly seemingly at random.
When this happens we can see from running SQL Profiler that the report queries are taking an extremely long time to execute. The same queries when run directly in management studio run quickly.
Initially I suspected parameter sniffing, and tried using OPTION (RECOMPILE) in the reports, as well as clearing out the particular query from the plan cache and running the SQL in SSMS to try and get a better plan etc but no amount of jiggery pokery by
me could get the queries to run any faster.
The really weird thing - is that stopping and starting the report server via the reporting services configuration manager instantly cures the problem.
I'd really love to know - why this might be? Is it something to do with the report server closing and re-opening its connections to the database? That's the only sort of thing I can think of...any ideas? Anyone? Any suggestions would be much appreciated.
LucasF

Hi LucasF,
In your scenario, usually we can monitor the execution log in Report Database. If you run below query, you can get the results how long the report takes to render (TimeRendering), how long to process the report(TimeProcessing) and how long to retrieve data
from Database(TimeData). You can check the starttime and endtime to know the total time for executing a report.
SELECT TOP1000 *FROM[ReportServer].[dbo].[ExecutionLog2]
More details information, please reference to similar thread below:
Steps for troubleshooting a slow SSRS 2014 server
Troubleshooting Reports: Report Performance
In SQL Server Reporting Services, a job will be created by SQL Server Agent if any of the following processes is underway:
query execution on a remote or local database server
report processing
report rendering
To cancel a job that is running on the report server, we can cancel the job directly or reduce the report execution time-out value in the SQL Server Management Studio and then will stop query execution. Please refer to the steps below:
Open SQL Server Management Studio, and connect to "Reporting Services".
Under the Report Server node, right-click on the "Jobs" folder and select "Refresh". Then, right-click on "Jobs" again and click "Cancel All Jobs".
Right-click on the Report Server node and open the "Server Properties" dialog.
Click the "Execution" option, and set the "Limit report execution to the following number of seconds:" to a much smaller number. After this issue is resolved, this configuration should revert to the previous state.
Reference:
Managing a Running Process
Setting Time-out Values for Report and Shared Dataset Processing
In addition, we can also use the KILL Transact-SQL statement to terminate a normal connection by terminating the transactions that are associated with the specified session ID. For the details information, you can refer to:
KILL (Transact-SQL)
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Order to stop and start Replication

Similar Messages

Maybe you are looking for