Order Type default on Maintenance Plan

Hi gurus,
How can i do a default value of order type ZPM02 on IP42
Thank you!!

You can set the default order type by planning plant as follows:
IMG
- Plant Maintenance and Customer Service
-- Maintenance and Service Processing
--- Maintenance and Service Orders
Functions and Settings for Order Types
-Define Default Order Types for Maintenance Items
PeteA

Similar Messages

  • Order type for conversion of planned order

    Hi gurus,
    I have configured 6 different order types for PPPI and not maintained any default order type for conversion of planned order into process order. But when I am trying to convert planned order into process order by branching out from MD04 to COR7 via the popup window, default order type PI01 gets selected which  cannot be changed. However, if I am converting the planned order into process order directly through COR7, then choice of order type is available.
    Could you please tell me how to ensure choice of order type while branching from MD04 to COR7?
    Regards,
    Abhik

    Hi Datta
    The order type is selected as below
    First it will look for any scheduling profile is maintained. If so it will select default from the profile.
    Next if the profile is not there it will look for any scheduler is assigned in material master. Through the scheduler it will select the profile and default order order type.
    Next it will look in plant parameter. With conversion from plan order to prod order  order type
    Next it will look in MRP group conversion order type,  if you have mainted it in Material master.
    This is the sequence. Please check have to maintained any of these.
    Hope this is clear
    Regards
    J . Saravan

  • Settings for costing data in order types for plant maintenance

    i want to know the purpose of settings for costing data in order types for plant maintenance. do we need to do it for sure i mean are those settings mandatory to analyze the costs on work order

    Yes you need to maintain those settings, as the plant maintenance orders are also considered as cost objects and in order for you to post any cost, you need to have a cost object.  Unless you maintain these settings, the cost you posted cannot be settled to a cost center.
    Assign points as a way to say thanks.
    Madhav Nanduri

  • Get latest order for a scheduled maintenance plan

    Hi experts,
    I have a requirement where i have to get the order id for a scheduled Maintenance plan.My scenario is explained as below:
    A maintenace plan is scheduled and as a result of it an order will be created automatically  by system. Now i have to write a Report program which will be running daily and this report has to pick only those order which are NOT complete and these order will come from the above scheduled maintenance plan.
    Therefore i have to pick incomplete order based on scheduled maintenance plan.Any idea how to achieve this requirement?
    In case of any doubt please let me know.
    Regards,
    Abhishek

    Thanks for reply. But my requirement is a bit differen.
    I need a BAPI which can take Maintenance Plan as input and it can return the latest created incomplete order which is created due to scheduling of Maintenance Plan.
    Regards,
    Abhishek

  • Order type settings for  convert planned order to production order

    Dear sir,
    I have 1 company code ,under 2 virtual plants are there.My scenario is plant 1(main plant)and plant 2 (virtual plant)
    both plant same FERT material.in plant 2 i am creating sale order and atual production will be done in plant 1.
    FERT material plant 2(strategy-40 sp.procurement-40 setting in spro ref plant (plant1) )and  plant 1 material (strategy 82)
    run the MRP MD50.panned orders are created but iam not getting production orders directly not getting the production orders
    .i have done settings in spro OPPE order type is given.in MD04 manual conversion planned order to production order system asking order type ,but i given order type in OPPE
    What are the settings for  production order directly from sale order at the time of RUNNING MD50
    Regards,
    Naresh.

    Hi,
    You will not get a production order out of MD50. That would have to be set up in the SD customizing for the sales order item, but I am not sure that would work with your two-plant setup.
    After MD50 you need to run CO41 for the collective conversion (and I also recommend the mentioned production scheduling profile customizing and then maintain this profile in the material master work scheduling view)
    BR

  • Maintenance activity type  and order type  for plant maintenance order

    How can i get the maintenance activity type  and order type  for a given plant maintenance order. Please let me know the table where i can get these two fields
    In AFIH i can only get the MAT for an order number

    Maintenance activity type -
    AFIH - ILART
    Order Category Indicator Plant Maintenance -
    AFIH - AKKNZ
    reward if heplful

  • Making Activity Type Mandatory in Maintenance Plan

    Hi PM Gurus,
    Can someone please let me know how to make the field "Activity Type" and "Planner Group"  mandatory (Required Entry) in Maintenance Plan at screen level.
    Cheers
    Deepal

    Hi ,
          If you do not want to go for user exit then you can also get it using transcation variants via tcode SHD0 ... for IP41 /IP02/IP42/IP43 Tcodes ..
    Search this forum for steps as it was discussed many times ..
    regrds
    pushpa

  • How to make a production order type default for a Plant.

    Hi All,
    I want to know the setting to make production order type ZP01 default for a plant so that when I create a production order using CO01 for that particular plant, it should always use ZP01 as order type?

    Hello Friend,
    One more method is to achieve this is by using Production Scheduling Profile. In transaction OPKP, for your Plant create a new production scheduling profile or use the existing one created in your plant. Inside the production scheduling profile, in order type section, for make to stock field, maintain the value as ZP01 (which you want to come automatically all the time while creating the order by co01) and save.
    Now assign this production scheduling profile in material master of all Semifinished and Finished materials.
    Now create new production order by co01. On initial screen of this transaction give only material code and production plant and enter (don't give anything in order type field).
    After giving material code and production plant, press Enter. After pressing enter system will take you inside the production order .
    Check here by default system will take order type as ZP01.
    Check and Confirm.

  • Order type while converting the planned order to prodcution order

    Hi All,
    While converting planned orders to production orders, it is always creating the production order with same order type. Can I change the order type?
    Is there any configuration settings for it??
    Thank you.
    Anil

    Anil,
    If you want to have different order types for different materials then you can define that in transaction OPPR for MRP Groups - Planned order conversion section and assign this MRP group to the relavant materials in Material Master MRP1 view.
    If you are looking at having different order types for a material based on MTS or MTO scenario, then please assign the different order types for the process in Production scheduling profile through transaction OPKP and then assign this profile to material master- work scheduling view.
    Regards,
    Prasobh

  • Default active maintenance plan in oracle 11g ?

    Hi all,
    I have a question about database resource manager.
    As i know Oracle11g automatically use the Default_maintenance_plan in the Scheduler window MAINTENANCE_WINDOW_GROUP. And the default CPU resource allocation for SYS account (SYS_GROUP) is 75% (level1).
    I open 3 separated terminals and run the below command with from SYS account concurrently:
    select count(*) from all_objects, all_objects, all_objects;
    Using top (linux) command to watch the CPU and hope it will raise to 75%, but it just raise up to nearly 50% (around). WHY CPU NOT RAISE to 75% ?
    in 10g, it will.
    Thanks.

    Maximum CPU Utilization Limit
    Resource Manager provides a new directive called MAX_UTILIZATION_LIMIT that allows you to place a hard limit on the amount of CPU utilized by a consumer group.
    The MAX_UTILIZATION_LIMIT directive is useful for limiting the CPU utilization of low priority workloads. This directive is also useful for providing more consistent performance for the workload in a consumer group, and it helps to build systems where end users experience consistent response times for each database operation.
    refer:-Oracle Database Administrator's Guide for details
    source:-http://download.oracle.com/docs/cd/E11882_01/server.112/e17128/chapter1_2.htm

  • How to change the main work center and  work center of each operation when generating work order by maintenance plan

    Dear experts,
    I face a problem that system get main work center from equipment master data as a default main work center in maintenance plan when creating maintenance plan. however, if main work center in equipment is changed later, the change will not synchronize to related maintenance plan. if work order is generated from maintenance plan, main work order in order is defaulted from maintenance plan instead of updated work center in equipment.
    another problem is that, for those orders generated by maintenance plan, the work centers in  operations is defaulted from task list in maintenance plan. in most case, work center in task list is dummy. Actually the work is done by work center in equipment master data.
    My expectation is how to auto replace the main work center and work center of operations in work order with the one in equipment master data if order is generated by maintenance plan? is there any standard configuration or enhancement/BADi that can help with this requirement?
    thanks！
    Wesley

    Wesley,
    Sorry - development is the only way.
    Another option is to create a batch program that runs before your IP30 run(s) and updates any maintenance items and task lists with the correct work centres.
    PeteA

  • Orders Types on Maintenance Items (Plans)

    Dear gurus...
    How can I control the order types that can be assign to maitenance plans?
    The maintenance items to default orders types is one thing, maintenance items to order types is another thing!
    In witch customizing tasks allow me to manage the order types that can be assign to plans?
    Many Thanks,
    Duarte

    Hi,
    Order type control to Maintenance Plant is at node OIOD.
    You can Define Default Order Types for Maintenance Items under
    Functions and Settings for Order Types node at SPRO.
    Thanks,
    Ramesh

  • Order type selection when converting from planned order to prod order

    Hello friends,
    I have one doubt.That when i am converting the planned order to the production order than from which default settings it takes the order type.
    As we can maintain the default order type in OPPQ , under conversion and in production scheduling profile also we maintain order type for make to stock, make to order, etc.
    So my question is to which setting the system gives the priority.
    Or they both are for different purpose.
    Thanking you guys in advance.

    Hi ,
       You can maintain the order type for conversion of planned order to production order in the T Code OPPE.
    Hope it will be clear.
    Regards,

  • Order release on maintenance plan level

    Hi,
    Is it possible to have preventive maintenance order release on maintenance plan level instead of order type level?
    Br,
    Shrithar

    In ECC 6.0 EHP 4 version, you have the option the setting release based on Maintenance plan.
    http://help.sap.com/ERP2005_EHP_04/helpdata/EN/86/429EA7A6E945E18A09EE75D566E789/frameset.htm
    From above link:
    Maintenance plan not immediately released
    You can set an indicator in the maintenance plan item to define that any orders created from the maintenance plan during scheduling are not released immediately. This overrides the "Set released status immediately" indicator in Customizing for the order type, if this indicator is set in Customizing.

  • Priority field mandatory for planning plant-order type

    Hi
    Is there a standard way through configuration that I may contol priority field in order header to be mandatory for some order types only in one planning plant?
    Problem is that if I make the priority field mandatory for order type, it will be so for all the planning plants which i dont want. Also i dont want it to mandatory at planning plant level since there are many order types under one planning plant and requirement is to make priority field mandatory only for some order types under this plant.
    TIA.

    Hi Tehsin
    Thanks for the reply.
    In the transaction we can separately make it mandatory for either planning plant or order type.
    My requirement is for combination of both.

Maybe you are looking for