Order type pick for production order from Sales order

Hello All,
I wanted to know how is order type picked in case of Production order is generated directly from Sales order. Can any one help
Regards
Divya

Hi divya,
1. Check your material master (mm02/mm03) on tab mrp 3, Check your strategy group
2. Check customizing for Strategy Group (OPPS). Check your Requirement type for Customer
3. Check customizing for Requirements Types (OVZH). Check what is your requirement class for your requirement type
4. Check customizing for Requirements Classes (OVZG). Check detail for your requirement class, in Assembly Section, maintain your Order Type. If order type is maintain empty, it changes directly to your standard order type PP01
Be careful for maintaining this order type in . It is wisely to copy than change the standard requirement type and class setting. As my experience after changing the standard, we can't put it back to standard settings.
Hope it's answer your question, and mind sharing some points.

Similar Messages

ADDDITIVE COST FOR PRODUCT COST BY SALES ORDER SCENARIO.

Dear friends,
We are using costing for sales order & we have maintained the costing variant under the path IMG> Controlling> Product Cost Controlling> cost object controlling> Product cost by sales order >premliminary costing & order based costing>product costing for sales order costing>Costing variant for Product costing >Check costing variant for product costing.
Under this we have maintained the Costing variant, Now we need to have Additive cost. But didnt found the tab in the costing variant where as when we check in T.code OKKN which is a part of Product cost planning we can find the Additive cost tab.
How to run addtive costing run for Product cost by sales order scenario & please guide me with one example.
Or else is there any configuration where we can assign standard costing variant PPC1 instead of Costing variant SOC1 ( which is a costing variant of Product cost by sales order.
Please guide me
regards,
Sandeep

Hi Sandeep,
You may please try using Unit Costing for Sale Order.
It is over an above the sale order costing you have done. So in case you want to post any additional known cost, you may do the unit costing for the sale order after the sale order costing.
Trust this helps

Business Content for Product Cost by Sales Order

Hi,
We need to do reporting on costs associated to Sales Orders. The corresponding R/3 Area is "Product Cost by Sales Order" in Cost Object Controlling. We have looked at the standard cube for Cost Object Controlling (0PC_C01) but this cube only contain costs related to manufacturing orders, whereas we need to look at costs associated with sales orders after Result Analysis.
Have you guys any ideas which content that might support this, if any?
Many thanks!
/ David

Hi Christian,
please refer to SAP Note 584791: <a href="https://websmp208.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=0000584791&nlang=E">BW-BCT-CO: Costs not extracted on sales orders</a>.
Unfortunately there's no DataSource providing the data you need for your analysis scenario. A custom development is needed (awful!!)
Note 584791 - BW-BCT-CO: Costs not extracted on sales orders
Symptom
In R/3, costs are posted directly to sales orders. The costs have to be analyzed in the BW system. In the standard system, however, this data is not extracted into the BW system.
Other terms
0CO_OM_OPA_1; 0CO_OM_OPA_6
Solution
1. There are currently no DataSources for costs on sales orders in the standard BW Business Content. Unfortunately, there are currently no resources scheduled for a new development in this area either.
2. Therefore, the DataSources and the Business Content must be created in the customer project within the framework of consulting as a customer solution concerning the generic extraction options of the BW Service APIs or function modules you have programmed yourself for extracting data.
3. Technical background information about costs on sales orders:
The transaction data is available in the following R/3 tables
COSS and COSP - Totals records or COEP - Line items.
This concerns records for the VB* object numbers.
The master data of the sales orders is contained in the VBAK and VBAP tables.
The 0CO_OM_OPA_1 and 0CO_OM_OPA_6 DataSources only extract costs for orders with master data in the AUFK table. These types of requests always have OR* object numbers. Therefore, these DataSources cannot be used for sales orders.
However, you may be able to assign requests from the AUFK table (for example, maintenance orders or production orders) to a sales order through the AUFK-KDAUF table field.

Change in document type while creating billing document from sales order

While creating billing document from Sales order it is creating with document type RV which is standerd one but i want to change Document type.
How can i change it?
Regards
Raj

Hi
If you use another existing document type, check that it has a number range suitable to you. Else create a new 'z' type and assign an entirely new number range, not used in the other doc types.
It is useful to make the FI document number the same number. If I understand from the forums, the FI number range must be external. Search the forum for this. It is very useful for the Finance people.
Kind regards
Dawn
Edited by: Dawn Verrell on Sep 9, 2010 4:10 PM

BAPI for Create PO from Sales Order Data and POST GR from PO created

Dear,
         Can u help me how to create BAPI for Purchase Order creation from sales order Data
          what the bapi to Post GR from the PO created.
Regards,
Manoj

Hello Manoj what you have to do to create PO from PR is that
1) Use   BAPISDORDER_GETDETAILEDLIST (pass sales order number in sales_document table) and then get PR (Purchase requisition number from this BAPI.
2) Use BAPI_REQUISITION_GETDETAIL to get PR items
3) Use BAPI_PO_CREATE1 to craete PO from PR then.
to create goods movement you can use
BAPI_GOODSMVT_CREATE
REWARDS IF USEFUL.

Report for each project from sales order

Hi All,
I am creating a project network from sales order.
Now i want a report from the sales order showing what is invoiced and the balance in each line item for the sales order.
Is there any standard report available.
Thanks in advance.
Amit

Dear Amit,
I think S_ALR_87013564 report will help u.
plz check.
Regards
Lallan

BAPI needed for goods receipt for delivery created from sales order

Hi experts,
I need help.
I want to post goods receipt for the delivery created from sales order. I have tried out BAPI BAPI_GOODSMVT_CREATE but I am not able to post it.
Is there any way to post this? I need BAPI and not FM MB_*....
Thanks & REgards,
Bhavin A. Shah

Hi,
Please refer to link,
https://wiki.sdn.sap.com/wiki/display/Snippets/BAPI_GOODSMVT_CREATE-ABAP
Regards
Shree

Profit center not picking correctly in PO from sales order

Hi Experts,
Profit center is not picking correctly.. in PO
In material master Profit center is configured as XXXX
We have raised a sales order for the same material with two line items (e.g) 1500 kgs & 1600 kgs and profit center has been changed in the sales order to YYYY
There is one purchase requistion for the same material with two line items
But we have raised two purchase order for each line item in which the same sales order is linked to these two purchase order.
In the first PO , for the first line item in sales order ie., 1500 kgs profit center is picked from the sales order ie, XXXX which is correct but in the second PO, for the second line item in sales order ie., 1600 kgs profit center is picking as YYYY ie which is configured in material master.
What could be reason ? Help in this regard will be highly appreciated.
Thanks in advance
Narayanan

Hi Narayan
Check the Account assignment in the 2nd PO.. Does it have E as Acct Assgn Category?
It should have sales order as the account assignment... If yes, then it must pick up PC from the sales order...
Try to put a deletion flag to this PO and create a new one, if possible... You would come to know if some one has changed the PC
BR,Ajay M

Creation of IBase for Production data or sales order in R/3

Hi,
My client is a locomotive manufacturing Company, They want to track the failure of parts in the locomotive and any changes made in the locomotive during service.
Kindly explain your thought on the following:
1. Here Each locomotive will have an MBOM created for each sales order. We need to create a IBase equivalent to the MBOM in SAP R/3 47. Is it possible to create an IBase with reference to Production order or Sales order. Will it copy all the BOM components to IBase.
Thanks in advance
Manik

Hi Madhu,
There can be multiple reasons why it does not go to APO.
Two of the most common overlooked points are:
1. ATP tick in integration model.
2. Activation of ATP in external system: this is done in SPRO in the data transfer section.
Another common point is cheking rule: In SPRO see that your business event(SO) is enabled for ATP check.
Also you can go to transaction CO09 for ATP simulation in R/3 .
Hope it helps. Otherwise you can revert with specific questions.
Regards
Santanu Dawn

Bapi for Delivery Creation from Sales Order

Hi
I have multiple sales order and i want to create 1 outbound delivery from it just like what Vl10A is doing.
Can i have BAPI or fumctiona module for same.
Best Regards
Subham

Check this thread:BAPI for Delivery Creation
Also search the forums..there are many threads addressing the same issue.
Regards,
Kiran

System allowing order related Billing for rejected item in sales order

Hi all,
I have created a new reason for rejection: "Billed before Go live"
I have then asigned it to sales item 10 in sales order thus rejecting it.
I expected that when I do the billing for this sales order, the system will not allow to bill the rejected item, but the rejected item is still getting billed by VF01
Can anybody please tell me why this is happening.
Regards,
Avinash Gyale

Hi,
mere reason for rejection is not enough for blocking from billing, at item level you need to put billing block also apart from reason for rejection, then only you can reject the item and block from billing.
thanks ,
gln

Purchase order on Hold is not working from Sales Order document

Hello gurus,
I'm detecting a problem that I have.
I have created a Sales Order and then, this document create a Purchase Requisition in automatic.
So, when I create the purchase order, adopting the purchase requisition, I want to save this as on Hold.
The problem is that the button "Hold" is missing.
But, if I create a purchase requisition and I register the sales order directly (account assignment "E") and then, I create the purchase order, adopting the purchase requisition, the button "Hold" is not missing.
I have active the BADI to Hold, but, it is only mention restrictions with Third Party and Services, not with Sales Order normal.
Could you help me please a.s.a.p.?
Regards,
Sandra Palomo

Application component: MM-PUR-PO-GUI
Function group: MEPO
The Business Add-In (BAdI) ME_HOLD_PO enables you to specify whether an
Enjoy purchase order can be put on hold or whether this function is to be
suppressed in accordance with your requirements.
In the standard system, this function is generally offered during the
creation of an Enjoy purchase order (transaction ME21N) and when a PO
that is on hold is changed (transaction ME22N).
Note
Enjoy purchase orders cannot be put on hold if any of the following
criteria apply:
o The PO contains service items
o The PO contains "third-party" items
o Commitment errors are involved
o Subsequent (period-end volume rebate) settlement is involved
In the case of stock transfers within a company code, the "Hold" function
is generally inactive. If an application object contains an error of any
kind, the function is likewise inactive.

Assign batch number from sale order to production order automatic

Dear all, I have a question for all. Please help me in this case
My scenario is make to order
I have a sale order, when i create sale order, i have assigned batch number at each line item.
When i run MRP for sale order (MD50), the system generate a planned order for it and I've converted to production order.
So when I view production order, I think that batch number what I've assigned to sale order will be assign to production order but that is not happen.
So, can you help me solve this problem. I think that sap can assign batch number from sale order to production order automatic but i don't know how to configure that
Thanks all

Hi,
To the best of my knowledge, when system is generating planned order / production order from sales order system doesnt copy batch number from sales order.
In fact , you are following wrong practice for generating batch no.
Follow procedure like this :
Create sales order without any batch assigning there. Run MRP with MD50 and then convert planned order to Production Order.
While creation / releasing of Production order, you have option to generate batch automatically by following way :
Go to OPKP (Production Scheduling Profile) -> Take your plant & give suitable name to Production scheduling profile-> Batch Management tab -
> Automatic Batch creation in the order maintain this field as
1 Automatic batch creation at order creation
or
2 Autom. batch creation at order release
This will generate batch number automatically at the time of creation or release of order.
Then follow same process i.e. Goods Issue, Confirmation & GR for production order.
So you will get sales order stock in the form of batch managed.
Check & revert if any issue in above flow.
Regards,
Tejas

PO creation from sales order

Hi
we have a scenario where in we are creating a manufacturing order ( This is a sales order with no delivery relevance and billing relevance ), we use this to transfer requirement fo sales order to production( production is not in SAP) via interface .
We need to create PO when we get the confirmed dates from legacy system . We planned to create the PO from sales order directly . How can we do this ?
Also my dubt is when we get the confirmed dates from legacy system in to SAP , do we need to update the PO which in turn would need to update sales order schedule lines or can we directly update schedule lines in Sales order .
IPlease let me know in detail if possible .
Regards
Ramanathan

Hi
You can use BAPI : BAPIPO_CREATE1_ for creating PO from sales order , you can pass the SALES ORDER no into the item level field : CRM_SALES_ORDER_NO---'' YOUR SALES ORDER '' . and fill the corresponding ITEMX for the field .
Regards
Swapnil

Liquidity Report not picking up Noted item and Sales orders

Hi Experts,
I created planning levels from source as PSK, yet the liquidity is not picking up these items from sales orders and purchase orders. Also while creating noted items, i have given planning levels in the configurarion and the same is not picking up in the liquidity too
Please advice
Thanks in Advance

Hi Hien,
We have created planning levels separately for MM and SD and we have created under SDF and MMF respectively.
IT is working for group created for direct FI entrly and linked the same with PSK and the same is working fine.
I am new to FSCM. Can you please elaborate FDFD?
Thanks and Regards

Order type pick for production order from Sales order

Similar Messages

Maybe you are looking for