Order type selection when converting from planned order to prod order

Hello friends,
I have one doubt.That when i am converting the planned order to the production order than from which default settings it takes the order type.
As we can maintain the default order type in OPPQ , under conversion and in production scheduling profile also we maintain order type for make to stock, make to order, etc.
So my question is to which setting the system gives the priority.
Or they both are for different purpose.
Thanking you guys in advance.

Hi ,
You can maintain the order type for conversion of planned order to production order in the T Code OPPE.
Hope it will be clear.
Regards,

Similar Messages

Default PR Type when convert from Planned Order

Hi all,
How can I default my PR Type when convert from Planned Order after MRP run. This can done via MRP Group control but how to go about controlling via Planned Order profile?
Which planned object type and planned order profile to be used? assuming that i need my planned to be output at LA type and convert to NB1 PR type instead of the default NB PR type?
Thanks.
Regards,
Andrew

Hi,
The system determines the document type from the stettings u are making in "planned order Profile" in Customising for MRP. There u define the order type, the procurement key and the special procurement key and also the account assignment category. So based on the procurement key and the special procurement key maintained in the Marterial master, the document type is selected.
Production > Materials Requirement Planning > Procurement Proposals > Planned Order > Define order profile
Choose the planned order type - NB1 Within this you specify the P req doc type to be used.
Through MRP group and the different PR document type for MRP generated PR is possible only if you assign the document type to MRP group in the MRP configuration.
Please try and come back.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Aug 28, 2008 10:54 AM

Type reflowing when converting from CS2 to CS3

We have just converted a lot of our machines over to CS3 but have noticed that some of the type is reflowing differently to our files in CS2, has anyone else come across this.
I have just noticed that it is the kerning that is causing the problem, kerning is set to Auto in CS2 which has given me a value of 0 between two of the characters but in CS3 the value is now -150 (auto), font i am using is Guia Script Pro which is opentype.

Hi ,
You can maintain the order type for conversion of planned order to production order in the T Code OPPE.
Hope it will be clear.
Regards,

Order type settings for convert planned order to production order

Dear sir,
I have 1 company code ,under 2 virtual plants are there.My scenario is plant 1(main plant)and plant 2 (virtual plant)
both plant same FERT material.in plant 2 i am creating sale order and atual production will be done in plant 1.
FERT material plant 2(strategy-40 sp.procurement-40 setting in spro ref plant (plant1) )and plant 1 material (strategy 82)
run the MRP MD50.panned orders are created but iam not getting production orders directly not getting the production orders
.i have done settings in spro OPPE order type is given.in MD04 manual conversion planned order to production order system asking order type ,but i given order type in OPPE
What are the settings for production order directly from sale order at the time of RUNNING MD50
Regards,
Naresh.

Hi,
You will not get a production order out of MD50. That would have to be set up in the SD customizing for the sales order item, but I am not sure that would work with your two-plant setup.
After MD50 you need to run CO41 for the collective conversion (and I also recommend the mentioned production scheduling profile customizing and then maintain this profile in the material master work scheduling view)
BR

Automatic Order Type Selection

Hi All,
I have mentioned Production Schedule Profile and Schedular in Materail Masster. When I create Process Order in COR1, It is not picking Order Type automatically when I enter for Specific material.
PLease suggest what other setting needed to be done.
Regards,
PRADEEP

Dear,
Have you assigned the production scheduling profile in work scheduling view of materail master of FG material?
And check the order dependent parameters OPL8 for plant and order type combination.
Also check converation parateter for order type for plant in OPPQ define order type here.
Regards,
R.Brahmankar

Order type is not picking while converison Plnd to process order

Dear Dudes,
i have maintained production scheduling profile in all material masters in which order type is specified. while converting planned order to process order order type is not picking.
thanks in advance.

Robert,
Since you are using same order type for both MTS & MTO, you can define this order type "PI01" in the MRP plant parameters using transaction OPPQ in the Conversion of Planned order section.
I am not sure, why production scheduling profile is not working for you, hope you are using the Production scheduling profile configured using CORY transaction check this part alone.
Regards,
Prasobh

Error:Type mismatch: cannot convert from Long to Long

hi friends,
I've a problem.I've a JSP that does some long converions,and its working fine when i make it run on my machine i.e
(Running Tomcat5.0),but when I deploy this file on the server which runs Tomcat 5.5.7,it throws this error:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 20 in the jsp file: /abc.jsp
Generated servlet error:
Type mismatch: cannot convert from Long to Long
Can anyone of you,tell me where i am going wrong???

Here is an example of doing it with a JavaBean... the bean looks like this:
package net.thelukes.steven;
import java.io.Serializable;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
public class FormHandlerBean implements Serializable {
     private static final long serialVersionUID = 1L;
     private Date startTime = null;
     private DateFormat dateFormatter;
     public FormHandlerBean() {
          setDateFormat("yyyy-MM-dd hh:mm:ss");
     public void setStart(String strt) {
          setStartAsString(strt);
     private void setStartAsString(String strt) {
          setStartAsDate(getDate(strt));
     private void setStartAsDate(Date d) {
          startTime = d;
     private Date getDate(String s) {
          Date d = null;
               try {
                    d = dateFormatter.parse(s);
               } catch (ParseException pe) {
                    System.err.print("Error Parsing Date for "+s);
                    System.err.println(". Using default date (right now)");
                    pe.printStackTrace(System.err);
                    d = new Date();
          return d;
     public long getStartAsLong() {
          return getStart().getTime();
     public String getStartAsString() {
          return Long.toString(getStartAsLong());
     public Date getStart() {
          return startTime;
     public void setDateFormat(String format) {
          dateFormatter = new SimpleDateFormat(format);
}You would only need to make the getStartXXX methods public that need to be accessed from the JSP. For example, if you will not need to get the Long value of the time, then you do not need to make getStartAsLong public...
The JSP looks like this:
<html>
<head>
    <title>I got the Form</title>
</head>
<body>
    <h3>The Output</h3>
    <jsp:useBean class="net.thelukes.steven.FormHandlerBean" id="formHandler"/>
    <%
         formHandler.setStart(request.getParameter("start"));
    %>
    <table>
      <tr><td>Start as String</td><td><jsp:getProperty name="formHandler" property="startAsString"/></td></tr>
      <tr><td>Start as Date</td><td><jsp:getProperty name="formHandler" property="start"/></td></tr>
      <tr><td>Start as long</td><td><jsp:getProperty name="formHandler" property="startAsLong"/></td></tr>
    </table>
</body>
</html>If this were a servlet processing the form rather than a JSP, I might throw the ParseException that might occur in getDate and catch it in the Servlet, with which I could then forward back to the form telling the user they entered mis-formatted text value... But since JSPs should be mainly display, I catch the exception internally in the Bean and assign a safe value...

Overflow when converting from "1.64174e+11"

Hi ,
I am working on PS module and facing the above mentioned error.Whenever I am attching any material haveing value more than Rs 100000 the system gives "Overflow when converting from "1.64174e+11""
The detailed error description is given below,
Runtime Errors         CONVT_OVERFLOW
Except.                CX_SY_CONVERSION_OVERFLOW
Date and Time          24.11.2008 11:19:23
Short dump has not been completely stored (too big)
Short text
     Overflow when converting from "1.64174e+11"
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPFV45P" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
      caught in
     procedure "KALKULATIONSWERT_UEBERNEHMEN" "(FORM)", nor was it propagated by a
      RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to convert the value "1.64174e+11", an overflow occurred.
Missing RAISING Clause in Interface
     Program                                 SAPFV45P
     Include                                 FV45PF0K_KALKULATIONSWERT_UEBE
     Row                                     8
     Module type                             (FORM)
     Module Name                             KALKULATIONSWERT_UEBERNEHMEN
Trigger Location of Exception
     Program                                 SAPFV45P
     Include                                 FV45PF0K_KALKULATIONSWERT_UEBE
     Row                                     140
     Module type                             (FORM)
     Module Name                             KALKULATIONSWERT_UEBERNEHMEN
Source Code Extract
Line SourceCde
110       MTCOM-MATNR = VBAP-MATNR.
111       MTCOM-BWTAR = VBAP-BWTAR.
112       CALL FUNCTION 'MATERIAL_READ'
113            EXPORTING
114                 SCHLUESSEL    = MTCOM
115            IMPORTING
116                 MATDATEN      = MBEW
117            EXCEPTIONS
118                 ERROR_MESSAGE = 04
119                 OTHERS        = 04.
120       MOVE SY-SUBRC TO SAV_SUBRC.
121     ENDIF.
122
123     IF T685A-KRECH = 'C'.
124       IF SAV_SUBRC = 0 AND MBEW-PEINH NE 0.
125         KOMV-KPEIN = MBEW-PEINH.
126       ELSE.
127         KOMV-KPEIN = 1.
128       ENDIF.
129 * Falls keine ET da, Zielmenge nehmen (Gut-/Lastschrift, Kontrakt ...)
130       DATA: DA_MENGE LIKE VBAP-KWMENG.
131       IF TVAP-ETERL EQ SPACE AND VBAP-KWMENG = 0.
132         DA_MENGE               = VBAP-ZMENG.
133       ELSE.
134         DA_MENGE               = VBAP-KWMENG.
135       ENDIF.
136       IF DA_MENGE > 0.
137         DA_WERT         = DA_WERT * KOMV-KPEIN * 1000
138                          / DA_MENGE * VBAP-UMVKN / VBAP-UMVKZ.
139       ENDIF.
>>>>>       KOMV-KBETR      = DA_WERT.
141     ELSEIF T685A-KRECH = 'B'.
142       KOMV-KBETR      = DA_WERT.
143     ELSE.
144       KOMV-KWERT      = DA_WERT.
145     ENDIF.
146
147     KOMV-WAERS         = DA_KALKO-FWAER.
148     RV45A-KOEIN        = DA_KALKO-FWAER.
149     KOMV-KMEIN         = VBAP-MEINS.
150     PERFORM KOMV_PRUEFEN USING SPACE
151                          CHANGING SY-SUBRC.
152 * Nur für den ersten Lauf prüfen, ob Status gesetzt werden muß
153     IF SAV_INDEX = 1.
154       DA_SUBRC = SY-SUBRC.
155     ENDIF.
156     IF SY-SUBRC = 0.
157       PERFORM KOMV_BEARBEITEN.
158     ENDIF.
159   ENDDO.
Pl suggest.
Rgds

Hi,
Try to declare your variable using Packed Number:
DATA: va_num TYPE P DECIMALS 3.
Hope this helps.
Patrick

Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?

Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?
Depending on the system version, and Office Word version:
- a pure URL link starting with http or even www sometimes works in PDF, either produced by Aperçu or Adobe, sometimes does not work;
- other kind of links where the text under display is not a URL, never work!
I like everything with Apple computers and software, except PDF generation. Output files are usually bigger in size, and no better quality, than under Windows. Furthermore, it is weird that something as common as hyperlinks does not work correctly!
I related this question with Mac OS X Snow Leopard, but the problem is still there with Mac OS Lion.
This problem seems to have been around for years, without any proper solution from Apple and/or Adobe! To me, this is very embarrassing!

Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student

How do I maintain column formatting when converting from PDF to Excel?

How do I maintain column formatting when converting from PDF to Excel? All info is no longer on the lines or in the columns they started out being in? Any help would be appreciated.

Sara,
Perhaps I am expecting too much from Adobe ExportPDF. The reason I subscribed to this service, for which I pay a yearly fee, was that I need a way to convert scanned and digital documents to Word &/or Excel. I read the link you included but to be candid the more I tried to understand what was written the more confused I got. The process should not be this difficult. Currently I am using a NEAT scanner to create PDF documents of whatever I scan. After I changed the OCR setting on Adobe ExportPDF the output was much better but not to the point it was usable as it was. Information that appears to be lines and columns are sometimes not recognizing two columns and just putting them together in one. Obviously not usable. The other thing it does is bunch numbers that appear in a column that are just a bunch of numbers that I have no way of fixing.
Please let me speak to someone who can help me. Right now I not getting anything of value in my paid subscription.

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
That would depend on your work flow. MOV is the generic QuickTime file container and is not related to any particular data compression format. If you perform a simple "Save" or "Save As..." action that merely copies the data in the WAV file to an MOV file, then the data remains unchanged and maintains its original quality. If, on the other hand, your transcode/re-compress the original data to a different compression format, then there is always the potential for some loss in quality. Depending on the codec and/or settings, the potential loss could be inaudible to severe.

Moving Scriptlet Code to backing bean when converting from JSP - Facelets

Hello!
We are converting our application from jsf1.2 to 2.0 and all jsps are being converted to XHTML. Some are trivial while others had very complex scriptlets.
I would like to know what are some of the recommended ways of moving Scriptlet Code to backing bean when converting from JSP -> Facelets.
I have thought about listeners, actionListeners, putting code getXXXX() of the backing bean and then calling #{bean.XXXX} but not sure whats the best way.
I do appreciate the response!
Eg of a jsp page:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="/WEB-INF/xxx-jsf.tld" prefix="l" %>
<%@ taglib uri="/WEB-INF/yyy-pp.tld" prefix="p" %>
<%@ page import="com.ttyy.search.beans.jsf.AdvancedSearchFormManagedBean" %>
<%@ page import="com.kkee.util.*"%>
<%
    AdvancedSearchFormManagedBean advancedSearchFormManagedBean = (AdvancedSearchFormManagedBean) request.getSession().getAttribute("AdvancedSearchFormManagedBean");
    if (advancedSearchFormManagedBean == null) {
       advancedSearchFormManagedBean = new AdvancedSearchFormManagedBean();
       request.getSession().setAttribute("AdvancedSearchFormManagedBean", advancedSearchFormManagedBean);
    advancedSearchFormManagedBean.initializeForAdvancedSearchOptions();
    advancedSearchFormManagedBean.setQuickSearch();
     request.setAttribute("portletHeader", "Hello " + advancedSearchFormManagedBean.getPerson().getFirstname() + ", check out the latest programs in your practice areas and jurisdictions");
%>
<h:form id="MYCenterForm">
     <p:portletRenderer portletSetName="test of portlet"
          portletContainer="#{PortletContainerManagedBean}"
          id="MYCenter"
          portletScope = "TEST_SCOPE"
          suppressIfNoData="true"
          portletSkinName="SOME_SKIN">
          <f:facet name="persistenceToolkit">
               <h:commandLink id="persistenceToolkitLink"
                    actionListener="#{PortletContainerManagedBean.persistPortletSetStateListener}">
                    <h:outputText value="Save State Of Portlet Set" id="persistenceToolkitLinkText"/>
               </h:commandLink>
          </f:facet>
     </p:pagePortletSetRenderer>
</h:form>
<%
     String flag = PropertyItems.getInstance().getPropertyItem("response.time.flag");
     if("1".equals(flag)){
          ResponseTime rt = (ResponseTime) session.getAttribute("responseTime");
        if(rt!=null){
            rt.setDesc("my cle loaded");
            long now = System.currentTimeMillis();
            long start = rt.getStart() + rt.getTotal();
            rt.setInterval(now-start);
            rt.setTotal(rt.getTotal()+rt.getInterval());
            LogUtil.log(rt.toString(), LogUtil.DEBUG_LEVEL);
            session.setAttribute("responseTime", rt);
%>

That helps.
This could be another topic question but itst kind of related to what i am doing right now. while converting JSP to facelet (in jsf2) I came across another issue.
<h:commandLink id="Save" rendered="#{RegistrationBean.isNOTInOrigionalRegistrationMode}" action="#{RegistrationBean.updateProfile2Submit}" styleClass="#{portalSkinManagedBean.contentPortletSkin.strongTextStyle}">
          <l:htmlSkinnedImage id="SaveImage" style="border:0;" url="save.gif" alt="Save Information"/>
</h:commandLink>When I click on the generated link, I get this. And this is happening for all the h:commandLink in the application.
http://localhost:9080/registration/updateProfile2.jsf[request.getQueryString()=null][request.getRequestedSessionId()=F1CCE237DD81D301F1C4DBA6910FFD8A][request.isRequestedSessionIdFromCookie()=true][request.isRequestedSessionIdFromURL()=false][request.isRequestedSessionIdValid()=true]Parameters:[rolePracticeAreasForm:title=rolePracticeAreasForm:primaryPracticeArea=10002javax.faces.ViewState=-2943345291093118815:-4400303399130292206rolePracticeAreasForm:practiceAreasMod2=10148.1rolePracticeAreasForm:practiceAreasMod1=10002.1rolePracticeAreasForm:Save=rolePracticeAreasForm:SaverolePracticeAreasForm=rolePracticeAreasFormrolePracticeAreasForm:otherField=rolePracticeAreasForm:fromMyAccount=1]||
javax.servlet.ServletException: Index: 0, Size: 0
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:325)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.legaledcenter.util.urlrewrite.UrlRewriteFilter.doFilter(UrlRewriteFilter.java:250)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.springframework.orm.hibernate3.support.OpenSessionInViewFilter.doFilterInternal(OpenSessionInViewFilter.java:198)
     at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.jscape.framework.galileo.support.upload.UploadFilter.doFilter(UploadFilter.java:71)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at java.util.ArrayList.RangeCheck(ArrayList.java:547)
     at java.util.ArrayList.get(ArrayList.java:322)
     at javax.faces.component.AttachedObjectListHolder.restoreState(AttachedObjectListHolder.java:161)
     at javax.faces.component.UIComponentBase.restoreState(UIComponentBase.java:1427)
     at com.sun.faces.application.view.StateHolderSaver.restore(StateHolderSaver.java:121)
     at com.sun.faces.application.view.StateManagementStrategyImpl$4.invokeContextCallback(StateManagementStrategyImpl.java:289)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1253)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at com.sun.faces.application.view.StateManagementStrategyImpl.restoreView(StateManagementStrategyImpl.java:284)
     at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:177)
     at com.sun.faces.application.view.ViewHandlingStrategy.restoreView(ViewHandlingStrategy.java:119)
     at com.sun.faces.application.view.FaceletViewHandlingStrategy.restoreView(FaceletViewHandlingStrategy.java:434)
     at com.sun.faces.application.view.MultiViewHandler.restoreView(MultiViewHandler.java:143)
     at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:199)
     at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101)
     at com.sun.faces.lifecycle.RestoreViewPhase.doPhase(RestoreViewPhase.java:110)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
     ... 22 more
********** Message End *************Thanks

Overflow when converting from "3.60001e+11"

Hi Guys,
I'm Working with my PO using MIRO, I don't know why the error occurs. I've used the SAP Version 620 but end up with an error, then used Version 710 and successfuly created the transaction, but I'm stacked with version 620. I'm not allowed to transact it using the Version 710 that's why im looking for a patch or upgrade within 620 that i can use so that it can be solve.
I'm in need of your help guys. I know there someone out there that can help me.
THE ERROR
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
       Occurred on     03/28/2011 at 01:00:47
Overflow when converting from "3.60001e+11"
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINS" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_CONVERSION_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"DISTRIBUTE_ACC_ASSIGN_RE" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When attempting to convert the value "3.60001e+11",
an overflow occurred.
How to correct the error
The exception must either be prevented, caught within the procedure
"DISTRIBUTE_ACC_ASSIGN_RE"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:

I won't post here if i already got the answer in SAP notes. I've spent 3 days searching for the answer. The only answer i got is the upgrade but can't be consider. OSS notes didn't provide me any answer. Hope u can help me
Edited by: docgon on Mar 30, 2011 2:38 AM

Upload maxdb really needed? - Overflow when converting from 32768

hello,
I am facing with a run time error that does not make sense when uploading maxdb database. The error is: "Overflow when converting from 32768".
I am following this configuration tutorial:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm
Anyway, is there a need to upload this database? We installed netweaver mobile with SQL server database.
Help please.
Thanks.
Edited by: João Carneiro on Feb 8, 2011 2:10 PM

Hi,
Uploading MAXDB is not mandatory. It is needed only when multiple devices need to be installed with MAXDB through setup or software packages, which helps administrator to roll out multiple devices, so that end users will get all the necessary software to install the device.
Hope this clarifies your query.
Thanks and Regards,
Suma

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

It seems to depend on a variety of different things.
Verizon appears to be going by the process time of orders, and not the order time of orders. Your process time will be the timestamp on your confirmation email.
It also depends on which model, GB, and color you ordered. The 6+ were in high demand and low supply.
It also depends on which warehouse (order location) your order was being processed through. Verizon reps have told me that some warehouses have more of certain phones than others, and if your order went to a warehouse that doesn't have enough of that particular phone then you are SOL and will have to back for a backdated order.
There is a possibility you will get it, but if you ordered any of the 6+ models, then it is unlikely.

Order type selection when converting from planned order to prod order

Similar Messages

Maybe you are looking for