Ordering a new I/O backplate for P45 Neo3-FR

How would I go about a ordering a replacement I/O backplate for this motherboard?

http://ocss.msi.com.tw/
or call your most local MSI office
>>How to contact MSI.<<

Similar Messages

How can i order a new software reinstall drive for my MacBook Air

I just bought my MacBook Air. With having 3 young Children, things get lost relatively easy, especially when they are as small as the Software Reinstall Drive.
How can i get a new one.
Thank you all in advance,
BR,
Evert Priester

Retired Engineer wrote:
If you have the mid 2011 MBA with Lion pre-installed you can create your own.
http://support.apple.com/kb/DL1433
Keep in mind this is not a full install mechanism and is not a substitute for the $70 item I mentioned previously. The network must still be accessable to perform a full re-install.
This method is a good backup for the recovery partition, though.

Is light faulty on new 60w power adapter for my Macbook?

Had to order a new 60w power adapter for my Macbook a couple of weeks ago -- bought it from the Apple Store (the new design adapter). When it's plugged in it turns green, then immediately turns red to recharge -- all normal. Once fully recharged the adapter light turns/stays green. But after awhile the adapter light goes out altogether. The icon shows it's charging, but the red (and green) light is off. If I remove the adapter and plug it back in the lights will come on again.
Is this normal?
Thanks.

I think I'm experiencing the same problem. My computer charges but the light goes back and forth from being on or off, orange or green. I'm a little disappointed that the light could be burned out, but I guess a little light like that can't last forever. Oh well.
Is it worth pursuing a replacement from Apple since I still have AppleCare? Just wondered.
Anyway, this is really helpful information. Thanks for sharing.

How can i order a new printer head for my photoshop 7250e

How can i order a new printer head for my photoshop 7250e Is there a number i can ring to speak to someone or email address i can use or a web page where i can order one
or a list of agents i can use to get it from
Finding simple information seems impossible, no where does it mention spares or replacements
I have tried a lot of fault finding am convinced this is the problem

Hello NigelH1,
The Print Head for the Photosmart 7250 is not available outside HP.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HT1688 I want to order a new housing for my iPhone 4 (mine is scrathced pretty bad) I just dont trust myself to take the phone apart to do it.. If i bring it to an apple store will they change it for me ?

I really wanna order a new housing for my iphone 4 (at&t)Ive dropped my phone a million times, and its even gone swimming
its SURPRISINGLY not shattered, but has a ton of deep scratches in it. i saw on Amazon.com you can buy complete new housings for them, and i watched a couple youtube videos on how to change them, but i really dont trust myself changing it. my luck it destroy it and it will be garbage, and ill be left with no phone...
question is.. Will APPLE put a new housing on it, if i buy it and bring it to them? (*i dont have apple care, or any kind of insurance on my phone*)

No, they will only sell you an out of warranty replacement, which for the iPhone 4 is $149 (US).

I returned my old ipod and ordered a new one a few days ago and i was never given a tracking number for the new one that is being shipped

i returned my old ipod and ordered a new one a few days ago and i was never given a tracking number for the new one that is being shipped

Go to the Apple Store webpage and in the upper right go to Account and select Track an Order. There you will find the status of your order. You only get a tracking order when the items ships.

How do I order a new SIM card for my Galaxy S3?

How can I order a new SIM card for my Galaxy S3? My old SIM card was stolen, and I need to replace it in early January. My phone number has to stay the same . I'd appreciate any help you could give me.

Call the customer service number or walk into any Corporate store and ask for one.

I ordered a new phone and shipped it to a friend in Dubai, UAE. without knowing i have to activate it by making 5minutes calls, please i need a way to activate it without sending it back to the US..any help? this has been very frustrating for me this past

I ordered a new phone and shipped it to a friend in Dubai, UAE. without knowing i have to activate it by making 5minutes calls, please i need a way to activate it without sending it back to the US..any help? this has been very frustrating for me this past few days

scottxx,
That was very nice of you to provide your friend with a new phone! I am sorry to say that the device will not be able to activate while in Dubai. For a device to activate it must connect to the VZW network to become active. I apologize for any inconvenience.
LindseyT_VZW

I currently have a mbp with two internal hard drives ( took super drive out) which for a video editor like myself is a dream I can edit video anywhere, my question can I order a new mbp with 2 internal flash drives?

I currently have a mbp 2.3 gighuz intel core 7 16 gig of ram with two internal hard drives ( took super drive out) which for a video editor like myself is a dream I can edit video anywhere, my question can I order a new mbp with 2 internal flash drives?

I wouldn't think so because the newer ones with Retina displays don't have an internal SuperDrive that can be replaced. Therefore the newer logic boards wouldn't have the two SATA/SATA Express connections on the logic board.
At least that was the case as of 2012. I've seen newer ones and they also don't have a SuperDrive.

Order of "New" button for creating project not working

Hi
In Project Server I've added several EnterPrise Project Types, and now I want to sort them the way I want in the "New" button in project center. But no matter what I do, the order is always the same. For instance, if I tick the box for the "Construction"
EPT, it does not go to the end of the dropdown list when you click the "New" button.
I have tried this in other deployments and it's working, so how can I debug this?

Hi Pedro,
Have you configured the EPT order in the server settings, as per the section #11 in the following article?
http://technet.microsoft.com/en-us/library/gg597674(v=office.14).aspx
In case you did, I've never heard or seen such a bug. I'd advice to recreate EPTs from scratch since they are just containers.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

I dropped my mac pro. The disc drive plays but will not record. medium drive error. How hard is it to replace the drive my self. i see screws on the bottom. Could I just order a new internal drive and replace it? Or is it too complicated for the average ?

I dropped my mac pro. The disc drive plays but will not record. medium drive error. How hard is it to replace the drive my self. i see screws on the bottom. Could I just order a new internal drive and replace it? Or is it too complicated for the average person? Would be cheaper to buy an external drive than to replace internal one? Any advice is appreciated

How certain are you the superdrive ONLY is at fault?
That depends on your skill level, if you grew up tearing things apart and putting them together, its absurd how easy it is.
For some however its too daunting. On a general skill level for the "average" person its about a 3 out of 10 in difficulty.
Can you order same? yes.

I just ordered the new iPad Mini for my husband.

He knows nothing about computers or tablet. Totally a beginner. I want to order a simple "how to" book for him.That will explain where to begin,
how to use gestures etc., settings.
Since no Mini books out there I would like to know if an iPad ios6 would be okay. I would think they would be
similar enough. My teaching him would not work.

Hi,
I'm glad we could help!
I get that it would be hard to teach your husband. Mine is surrounded by four financial screens all day and can do those computers in his sleep - but doing regular stuff on a computer? (He usually only used it at home to check out golf courses and sports scores.) He only wanted "the cheapest kindle," so he could read at night and when he had to fly, but, in front of him, I suggested we get him an ipad instead and we went through all the reasons. The poor guy sat there clueless which really amused us! He let us make the decision.
However, I got him started. I actually had him meet me at the Apple store to pick it up so they could set up anything he needed with an Apple guy. That helped. Then my sons helped him. He's pretty good at it now, uses it a lot, and loves it. The Apple guy showed me how to sync his ipad to my imac and I gave him all the music I had in itunes that I had downloaded from our cd's of many years first. That made him really happy! He has lots of music on it and can read the paper at the same time. This from a guy who had no need for an ipad. He now does so much more on it.
Where in our 50's, so clearly we didn't grow up in the tech world where it all comes so naturally. And the $12. bridge tolls are not worth paying for to get going. (Ours are same and going up soon.)
I checked lynda.com (great reviews,) but they only have a few ipad lessons, so probably not worth it for you, even just for a month. There are others but I don't think they're worth the price. If your husband checks youtube.com with some questions, he might be amazed at the help he can get.
If he can use your computer while he works from a tutorial step by step with his ipad mini, he might find it cool enough that learning it will encourage him to do more with it. He does have an e-mail address, doesn't he? (My husband had one on our family computer but never used it - only his office e-mail. So we set one up and he must it because it will be his Apple ID.)
I think you made a great decision in buying your husband the ipad mini. And I'm sure he'll enjoy it!

I got a new laptop and downloaded iTunes, when I put new music on it for the first time, my entire music library disappeared, leaving me with only newly downloaded music in my library. My iPod still has all my old music.

Recently, I bought a new laptop (a Lenovo), so I downloaded iTunes to it. When I bought new music from iTunes for the first time on the new computer, I went to my music library and there was no music, except for the new songs I had just bought. I have no idea what happened, I've had hundreds of songs I've bought from iTunes or downloaded from bought CDs over the years, which are all still on my iPod (nano, from 2008), and suddenly they just didn't seem to exist. I have yet to access the iTunes account on my previous laptop to see if my music is still there, but I would assume yes. When I went to sync my iPod to my iTunes to at least get the new songs to the iPod (so that my complete library can be on at least one device), I realized that in order to sync my iPod to my iTunes, I would be deleting all my old music and replacing it with the new. So now, I only have a few new songs on my laptop's iTunes, and only my old songs on my iPod. In both cases I paid for all the music, so I don't want to just delete any of it. Is there any way to fix this?

Also-I tried to use my backup hard drive, but I wasn't able to drag/transfer/send/move any of my muic files onto my iTouch when the iTouch was connected to my computer. I can't figure out why it won't let me do that.
The only thing I can see when I open my iTouch on my computer is my file with photos. I can't see videos, music, or anything else. What's going on?

A New MBP (and one for the road: any highly-recommended external drive for.

If I order a new MBP 17" for architecture and planning grad program, will SL come installed on the machine? Is SL considered a whole new OS or jut an update to Leopard? I am not even sure I am wording the questions correctly, so I apologize if I am not. I stopped at Tiger because the Leopard OS looked a bit too intimidating for me back then but I think I can deal with it now. Is it a big set-back that I did not learn how to use Leopard and now I am getting SL?
thanks for any help in this area.
I will throw this out there. I also need a decent but very heavy duty external hard drive to use for the work done with CAD. Any recommendations on a top-of-the-line heavy duty external hard drive? I guess the case is the main thing but the drive should be able to take some extra abuse because I baby the MacBook Pros but sometime the external drives get the abuse. I think USB2.0 is good enough for what I need.
Thanks Again

I would imagine that you could turn up good and bad reports on any drive. I have been highly satisfied with my 3 LaCies, two dating back to 2004. And, LaCie has very good phone support.
I use only clones and drag and drop for data changes between clonings. If I had to choose one method of backing up, then I definitely would use this process. Still, one can take a dual approach other than mine. The idea is to have a clone, which is updated fairly recently, to serve as a fail-safe, system backup, and restoration device. And, one could still use TM for day-to-day backups because of the flexibility it allows in moving backwards in time to retrieve data and because it updates automatically frequently. I want to experiment more with TM. So, I will move to this sort of dual system in the near future--as soon as I figure out which partition on my main external I can do without.
For cloning, I like SuperDuper because it has the ability to make incremental clones--thus, shortening the recloning process significantly. CCC is good, but I have never used it. Actully, Disk Utility is a highly respectable cloner, but it does not have as many options as the others, including not having the ability to make incremental clones.

Design the New process set up for Materials in one physical stock plant

Hi Experts,
The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical warehouses in the system without having thru really physically separate the warehouses into two different ones. Materials physically will be only for one warehouse.
Requirement is for Design the New process set up for Materials in one physical stock serving plant into two different system plants.
Most of the things are pointing in the direction that order Backlogs will not be converted into new organization. We have backlogs for the material requirements for purchase orders, sales orders whatever we have in the current setup; then there will have all are new orders from the certain dates taking in the new organization set up. These backlogs are very long at least three to four years.
We would like to find some way to have the all the material requirements ending up in one basket instead of two baskets. That still be able to deliver at least in system point of view from two different baskets.
We need to do analysis on one physical stock serving plant into two different system plants that could be done either by material master data or as i understood that could be from PS side.
can any one please tell me how we can maintian this setup in the system.
Please provide your valuable inputs.
Brgds,
RK

RK,
Sorry, the creation of such an end-to-end solution is outside the scope of an online forum. Most consulting companies would send a multi-disciplinary team to perform this task, and would take several weeks to research your requirements, and come up with a prototype.
Sales order availability checking is described in SAP online help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744b51546011d1a7020000e829fd11/frameset.htm
I will say this. If your goal is to have two plants, with two company codes, and you wish to only procure or produce in one of the plants, then generally I would recommend using Special Procurement via Stock Transport Order (in standard SAP, Special Procurement 40). This based on a very small knowledge of your requirements. I have already cited the Sap online help for special procurement.
SAP online help for Warehouse management is at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
As you begin to read the required topics, I am certain you will realize that this task is beyond the capability of an untrained person. I again suggest that you search for professional consulting services to assist you in this project. It will be money well spent.
I am now closing my responses to this thread. Good luck in your project!
Best Regards,
DB49

Ordering a new I/O backplate for P45 Neo3-FR

Similar Messages

Maybe you are looking for