Ordering in multiples in CCM 2.0?

Hi All,
Am wondering if there is standard CCM functionality to order in multiples so for example, I'd like to order an item in lots of 5.
Thanks,
Paula.

Hi Paula,
You have to modify (or copy) the implementation of the same BADI /CCM/CSE_OCIMINQTY including that check.
Regards
Jorge

Similar Messages

  • Single Transfer Order for Multiple Handling Units

    I have been researchig the ability to create a single transfer order for multiple handling units.  My assumptions are if it can be done that:
    1) A transfer order can have a single source, so if the source document for the handling unit (delivery) is different, that means different transfer order
    2) A TO can have multiple materials (line items) with different destination bins and quantities per bin
    I looked at the configuration for TO Split, but it's not clear that this will handle my requirement.
    I also saw this http://aq33.com/material-management/Articles-005798.html and it also says that my requirement can't be meant.  I'm just checking before I tell my customer this cannot be done.

    Yes you are right, if Source document is different, you need to go with different TO.
    But you can choose the Handling unit split, while creating a TO itself. i.e., You can quantify the goods for each handling unit.
    Edited by: Ganesh M on Feb 29, 2012 6:20 AM

  • How can I create a single order from multiple quotations?

    How can I create a single order from multiple quotations that I have created by the transaction VA21 ?
    Thanks in advance for the answers.

    hi
    Go to transaction: /nva01
    Enter order type : ZOR
    Sale org :xxxx
    Dist.channel:xx
    Division :xx
    Press enter
    Click on “Sale document” and select Create with reference
    Then enter 1st quotation number & click on “COPY” or “Selection list”. Then click on “Copy “.Then all line items which belong to quoation1 copy to order.
    Then,
    Click on “Sale document” and select Create with reference
    Then enter 2nd quotation number & click on “COPY” or “Selection list”. Then click on “Copy “.Then all line items which belong to quoation2 copy to order.
    Then,
    Click on “Sale document” and select Create with reference
    Then enter 3rd quotation number & click on “COPY” or “Selection list”. Then click on “Copy “.Then all line items which belong to quoation3 copy to order.
    Now save the sale document.
    Kindly give reward points
    Edited by: WISH on Mar 19, 2008 2:25 PM

  • One order with multiple lines in OM is creating multiple invoices

    Application: Oracle 11i (11.5.3)
    Modules implemented: GL, OM, AR, AP, PO and CM
    Business Requirement:
    Our client would like to create Order consisting of multiple lines in Order Management.
    The Orders created in OM with multiple lines could be booked, picked, released and transferred
    over to Accounts Receivable. On transferring over the Orders from Order Management to Accounts
    Receivables using Auto Invoice process the Order should create ONE invoice with multiple lines.
    Moreover, for the multiple lines created on an invoice deferred revenue could be applied.
    ( eg. An order is placed for software and support. The support is to be invoiced all at once but revenue deferred to 1/12
    recognized each month as revenue is earned.)
    Right now we are getting two invoices. It is putting the deferred revenue item on a seperate invoice. Is this normal
    functionality? How can I get both on one invoice.
    thanks

    Hello Monique,
    Well you can have one invoice generated for an order with multiple lines. This is possible by changing some rules in Account Receivables. Use the grouping rules under setups->autoinvoice in AR. You can club your invoices based on any of the columns of ra_interface_lines_all. Hope this works for you.
    Arvind

  • Controlling Post Order of Multiple View Objects

    Hi ,
    Here is the scenario:
    I have a use case of "Creating an Abstract"
    Steps:
    step1 ) (Page 1) Author presents the details of the abstract (Details goes to 2 tables ABSTRACT & ABSTRACT_CONTENT tables). For the 2 tables i have 2 entities. I use a view here called CreateAbstractView from both the tables( here i control the post order of the entities ....code from jdeveloper 11g guide)
    Step 2)(Page 2) Author presents details of Additional Authors. I use the view (*AdditionalAuthorDetailsView*) (Details goes to 2 tables AUTHOR & ABSTRACT). Here in the abstract table i have a parent key(parent abstract id) So all the additional authors has a record in Abstract table with parent_abstract_id from step1. ABSTRACT table also has a foreign key (author_id) .Here also i control the post order of the 2 entity object using the code from jdeveloper 11g guide.
    I also have a link from CreateAbstractView to AdditionalAuthorDetailsView (abstract_id in Abstract table from CreateAbstractView to parent_abstract_id in Abstract table from AdditionalAuthorDetailsView )
    If i have a commit on both the pages , i don't see a problem.
    But i want to have a commit process at the end so that the user can review the information. So when i try to add a commit process at the end , i get a exception (Parent Key not found exception) which i came to understand that commit from AdditionalAuthorDetailsView is happening first which is trying to insert a record into ABSTRACT table and cannot find the parent_abstract_id.
    How do i control the post order for multiple view objects in such scenarios?

    Hi!
    Please take a look at the dev guide. It comes down to controlling the posting order on entity level.
    http://download-uk.oracle.com/docs/html/B25947_01/bcadveo007.htm#CEGJAFCF
    Sascha

  • How to create production order for multiple items having common raw materia

    Dear all,
    We are running a sheet metal fabrication company at Vadodara Gujrat.
    Please guide us how to create single production order for multiple items using single raw material??
    For example, We want to produce baby shirt(item code AAA001), shirt with full sleeve(item code AAA002), shirt with half sleeve(item code AAA003),shirt slim fit (item code AAA004),shirt loose fit(item code AAA005) from single raw material say(item code XXX001).
    Right now we have to create 5 production order to produce above 5 items of single sales order  in SAP B1 though it is made from single raw material which is foolishness and time consuming too. (Please also note that to produce any finfish good item, raw material required for that item may vary every time in our process.)
    Kindly guide us how to solve the problem.
    Thanks.
    RUPESH  +91-9227744273
    WEB : www.gorasia.co.in

    Hi Rupesh Gorashiya,
    This is possible through MRP for that you have to put Sales Order first and Run MRP Wizard
    MRP Wizard Put Multi Production Order as per Item Taking in Sales Order just click it on and execute.
    Thanks,
    Srujal Patel

  • How to Split 1 Order into Multiple Deliveries based on Partner Function ?

    Hello,
    How can I split one Sales Order into multiple deliveries, based on the partner function "managed by" ?
    The requirement is that one order will be created for different "managed by".
    If partner function "managed by" is same at line item level in order, than the items having same "managed by" can be combined in one delivery, else delivery will split and multiple deliveries will be created from 1 Order.
    Jatin Mistry

    Hi,
    You need to create a new requirement in tcode VOFM for that, together with your ABAP consultant. This requirement will be used in copy contol.
    http://saptechsolutions.com/pdf/VOFMCopyRequirementRoutines.pdf
    MdZ

  • Standard Rush Order with multiple plants

    Hello gurus,
    We just upgraded to 6.0 from 31I and when creating a
    rush order with multiple plants the first item's delivery
    does not contain a ship-to party were the second item's
    delivery does.  Table VBPA does not have a record for the
    first delivery but the second delivery is there. This did not happen in 31I.
    Please advice.
    Best Regards.

    hello, Ruben.
    hhmmm.  your table XVBPA looks like a created table that is not SAP standard.  i am not an ABAP person so i could not pretend to give you good advice, but i (my speculation only) suspect that there was a user exit or an ABAP program that made the system do the postings to this table instead of the standard VBPA.
    i further speculate that during the upgrades, some of the enhancements may have been lost or diverted.  (to prevent this, you usually use the 'Z' naming convention, which is to have this letter as the start of any name for an enhancement or definition outside of SAP standard)
    your best bet is to try getting an ABAP consultant (or are you one already?) to help you look at this.
    regards!

  • Execution order of Multiple Numeric Limit Test?

    What is the execution order of "Multiple Numeric Limit Test" in TestStand 2010?
    I am using a custom steptype of Multiple Numeric Limit Test. I want to manipulate the input parameter. How can I do that. I am not interested in making a new steptype. I am writing in Post-Expressions and the data is manipulated as they should but it is not evaluated. I is evaluated before the Post-Expressions executes.
    For example I am writing: Step.NumericArray[0]= Step.NumericArray[0]*1000/(2.5-Step.NumericArray[0])
    The execution order when looking at the TS manual at page 3-13 is Evaluate Post-Expression before Evaluate Status expression. But it is not what I see. I have also tryed using the more simple Numeric Limit Test and it works as I expect it to according the manual.
    Anyone knows about any workaround for that?

    Hi Ray
    Thanks for your reply
    I have tried writing what you are suggesting: Step.Result.Measurement[0].Data= Step.Result.Measurement[0].Data*1000/(2.5-Step.Result.Measurement[0].Data)
    Still it evaluates the step before the post-Expression. When I am looking at the variables at runtime the Step.Result.Measurement[0].Data is having the correct value but it seems to evaluate the step before the Post-Expressions.
    Any other suggestions?

  • How to create a Sales order from multiple quotations?

    Hi All,
    Please tell me how to create one sales order from multiple quotations?
    Regards,
    Maddy

    Hello Maddy,
    To create the sales order from multiple quotation, you should put the value "F - Only at item level: Always with selection option" under Quotation determination in your sales transaction type.
    It will give you a pop-up to choose your quotations item while creating the sales order.
    Some per-requisites are there:
    1. Copy control should be maintained between your quotation and sales order.
    2. Quotation should be error free and should have the status "Released"
    3. Sold to party and Organization should be same in both transaction.
    For more information you can check the below link:
    Processing Quotations - Sales Transactions - SAP Library
    Best Regards,
    Dinesh

  • Problem in creating Maintenance Order with multiple operations

    Hello all,
    I am facing problem while creating Maintenance Order with multiple operations and sub-operations. I am using BAPI : BAPI_ALM_ORDER_MAINTAIN.
    For single operation it is working fine,but i am unable to create MO with multiple operations and sub-operations.
    Please, provide me the inputs required,
    I have used methods :
    ORDER        CREATE,
    OPERATION CREATE
    and SAVE.
    Regards,
    Siddhartha

    Hi,
    The FM you are using is a perfect one. This FM is bit tricky to use. You need to perfectly pass the Reference number field. which links various input table parameters of this FM.
    Thanks & Regards,
    Navneeth K.

  • Where/ how do I set SNP to create Planned orders with multiple line items?

    Hi
    Currently our SNP is generating planned orders on a daily basis, it creates a single order with a single line item per location.
    Where/ how do set SNP to create planned orders on a daily basis to generate a single order with multiple line items per location, so therefore one planned order with multiple line items for a single location.
    Thanx
    Keegan

    Hi Keegan,
                   In SNP (APO) it is not possible to create order with multiple line items.
    But you can do some settings so that while planning system can do aggregation and disaggregation.
    But your requirment should be set on Aggregation/Dis-aggregation logic.
    Please follow the follwing links:
    http://help.sap.com/saphelp_scm2007/helpdata/en/2c/c557e9e330cc46b8e440fb3999ca51/content.htm
    Aggregation:
    http://help.sap.com/saphelp_scm2007/helpdata/en/42/f731d078e73ee4e10000000a1553f6/content.htm
    Disaggregation:
    http://help.sap.com/saphelp_scm2007/helpdata/en/a6/ebefaf32e22e468355da304cc59387/content.htm
    Please be sure that the setting of this logic will be at planning area level.
    You can't change aggregation/disaggregation logic further.
    Regards,
    Santosh

  • LSMW program to upload the sales order with multiple line items.

    Dear SD and PP Gurus,
    I am new to creating LSMW Program.
    I want to create a LSMW program to upload the sales order with multiple line items. I have read on SDN that it can be done on two phases. First Create Header Data than line items. IS IT TRUE??, Or
    Is there any procedure by which we can load the sales orders with multiple line items in a single run (part).
    I want to use Batch process, not a BAPI or IDOC procedure.
    I have created a program with
    object 0090
    Method 0000
    Program Name RVINVB10
    Program Type D
    Source Structure 1 - For Header and Source Structure 2  for Line Items.
    Mapped Field INDET (With Fix Value 1), ORDERTYPE, SALESORG, DISTCHANNEL, DIVISION, CUSTOMER, PONUMBER , DELVDATE, PRCGDATE, PMTTERM
    INCOT1 INCOT2 with Source Structure - 1 and
    Field INDENT (With Fix Value 2),  ITEMNO, MATCODE, MATQTY, SUOM, PLANT, BATCH, AMOUNT with Structure-2
    than maintained Structure relation ship, field Mapping, Specified Files, Assigned files, Read Data and other process,
    At final stage (Start Direct Input program RVINVB10) it is giving a message - Table name not allowed.
    Please tell me where I am wrong.
    Thanks in advance.
    DSC

    Dear SD Gurus n Experts,
    I have solved the above problem. But there is another problem appearing regarding the date format. Now system generating a message: Date . . is not valid.
    While I am using Date: YYYYMMDD format in flat file, which is SAP's Standard Format.
    In SDN Link: LSMW upload Sales Order using VA01/VA02     I have found that there are some date fields which are mandatory to filled. Here I have mapped
    VDATU - Requested delivery date,  BSTDK - Customer purchase order date,  PRSDT - Date for pricing and exchange rate,  BSTDK_E - Ship-to party's PO date, FKDAT - Billing Date, KORDT - Delivery Date,
    and PRGRS - Date type is Constant = D
    Can any one tell me, where is the priblem.
    With thanks,
    DSC

  • Sales order with multiple billing doc's

    HI Guys
    My client has specific requirement related the freight charges .Freight charge is represented with a condition type in my pricing procedure. If a given sales order has multiple shipments (I.E deliveries) then this freight charge is getting calculated partially at item level and passing on to the   billing documents accordingly. Customers receive invoices with part of those charges. They will receive other parts with other shipments and invoices until sales order is completed
    As per my clients business it would be more logical that Freight charges are invoiced on the first invoice. And not as parts in each billing doc
    There are two things which are striking to my mind in terms of solution
    1.   Since it’s only to do with showing the freight charges on the output sent to the customer. Is there any option to display the complete freight charges on the 1st billing doc’s output type? And restrict to display in the remaining billing doc of a given sales order. Any idea how to achieve it this way
    2.   Can this be controlled with the help of copy controls between delivery and billing doc at an item category level .i hope there should be some standard routine in place if not what should be my logic in this routine that helps to accomplish this task
    3.   Create a routine and assign it to the condition type ZMIN…Not sure what logic should I built in here to get the above  requirement up and running
    Please guide me a way forward on this……………..
    Thanks for your support.
    Will reward without fail …
    Mohit

    Hi Madhu,
    The billing document cannot be deleted. It can either be cancelled or a credit memo created with reference to it. You can also check in the same VBFA table, if for a billing document any cancellation exists. If yes, then, the delivery cost becomes relevant. Else it does not.
    However, there could be a timing issue. Say if there are 3 deliveries and 2 of them are taken for billing at the same time in different sessions. (I am not sure if SAP will allow this because of the locking of VBAK table but still a possibility). Then, when the routine goes back to VBFA with the Sales order number, it does not find any billing document. So there is a chance that the freight charges may appear on both deliveries in full. So, you may want to test a few scenarios like this to make sure the logic is good and accommodates all scenarios. 
    Hope this helps.
    Regards,
    Mukund S

  • VL06 / LT0S create Transfer Order for Multiple Deliveries

    Dear all,
    My customer is used to create a WM Transfer Order for multiple Deliveries with transaction LT0S. The group that is processed here was created with VL06 / subsequent functions/ Group / Create with WM reference / TO for Multiple Deliveries.
    -Currently I am trying to find a backway processing mode for this. Are Pickwaves a good alternative? Or will they generate TO' s per Delivery?
    -My concern is this: Creating ONE TO is essential to keep the the picking route. With multiple TO's I will lose this. Creation of the group mentioned in the menu path above requires manual input such as giving a name for the group and checking the checkbox TO. for Mult.Del.
    Thank you for your time.
    Sandeep

    Vinod,
    Thanks for taking the time.
    Have been able to have my Pick Waves generated in background jobs. However, not been able to process these Pick Waves in a single TO. Each delivery gets its own TO. So far Pick Waves have not proven to be an alternative to LT0s
    I have not been able to find a setting -like the checkbox in VL06 K Group with WM reference, TO for Multiple Deliveries- that enable me to have ONE TO per Pick Wave.
    Any suggestions?
    Thanks,
    Sandeep and Dave

Maybe you are looking for