Ordering more then 2 ipads2 at the same address?

Hi guys.
Is it possibile? or I have to use another address to order the thrid ipad2?
Also how does apple detect whether im buying more then 2 ipads? by debit card? or by shipping address?
Please guys don't give an answer unless you are 100% sure. Because I don't want my money to be HELD by my credit card company for 30days if apple cancels the order:S
Message was edited by: Mohammad Fadin
Message was edited by: Mohammad Fadin

typo to*
Can you elaborate "2 per transaction"?
Do you mean different orders? because I still don't get why would apple doesn't allow ordering more then 2 ipads in 1 order but you can order another 2 ipads when creating a new order?
Also does apple usually deduct the ipad2 funds once the order placed? because it seems mine didn't

Similar Messages

I can not establish more then 1 call at the same time

Hi,
I have SPA9000 with four active accounts. I can not establish more then 1 call at the same time. Accounts are all in registered state. The field in SIP tab, Default Group Line:, is by default: 1,2,3,4 which means if line 1 is busy try the next one in the order ( in this case number 2). But this is not happening. It always tries to dial out with the first line (account). There is no problem with the provider and I don't want to specify groups of userID's and to assign them special line for dialing out.( by the way in this way it is possible to establish more parallel calls, but then each user will always have to dial thru specific line only). Please help me to find out if the SPA is faulty or give me some workaround, so that when I try to make a call , if one line is busy to dial out thru the next available.
P.S. I suspect that SPA9000 does not notice when the line is busy or not. Maybe there is some issue with the Control Timer Values (sec) on Regional tab.
Thanks,

no it can only be one person at a time

How can I load more then 1 img within the same Cell of datagrid?

Hi
I am using Flash CS3 datagrid component, I want to show more than one image in the same cell.
I m using LoadCellRenderer class extends UILoader implements ICellRenderer,
but it loads only one image in cell.
can any one guide me?
Thanks in advance.

Hi, kennethkawamoto2
I go through the on-going thread. and apply the code also but result is same,
Data Grid inbuilt Roll over , selected, selection -- events are disappear after apply custom CellRenderer class.
Any idea Why this happend?

Can my photoshop subscription be used on more than one laptop at the same address

am i able to use photoshop/lightroom on 2 laptops at the same address with my subscription

You can install on two computers for your own personal use; but not for use at the same time, and not for sharing with colleagues or family.

If I order more than 1 copy of the same iphoto book, is the second less expensive?

I want to order 5 copies of the same iphoto book. Will each one cost $29.99 for 20 pages of will the 2nd, 3rd, etc be less?

This page describes the conditions for shipping and pricing. The conditions may be different for each country - this is the US page.
http://store.apple.com/us/help/shipping_delivery
Replace the /us/ part of the URL by the code for your country or start from this page to find a similar page for your country: The Apple Store - International Print Product

It is possible to open the front panel of a subVI more then one time at the same moment?

I want to open a subvi´s front panel several times with each one operating independently. The subvi has a ring with several variables to choose to show in a graphic. The subvi is called from a button on the Main Front Panel. It is possible to, for instance, open the subvi and set it to show a temperature graphic and click again on the button to call another instance of the same subvi and select pressure for the graphic, keeping both new windows side by side? Will I still be able to access the Main Front Panel?

Yes you can. You have to use a .vit (VI template file). There's an example here. There's also been lot's of discussion on the subject. I think if you do a search for vit, you'll be able to find additional information and examples.

Opening the same form more then one time in the same session

H! I want to accomplish the following .... I have a form that has a button. The code in the when-buttin-pressed trigger is a call_form - to open another form. I want to be able to push this button as many times as the user may want and the form should keep opening a new form. Meaning I can have 10 forms of the second form open if I want. The user basically wants to be able to flip between the data on the same form opening up this form a couple of times in different windows. when I use the call form the button on the initial form is becoming disabled - not allowing me to push it again to open another form without closing the one already open. Please HELP!

Sounds like you need Run_product rather than Call_form.
It will establish multiple database sessions, and the user will be responsible for terminating them. And I am not sure, but this may only be possible in client/server forms.

More then one player playing the same stream

Hi,
the problem is when i try to send media stream to a multicast server with class D ip address (224.224.224.24) on port 49150
it should multicast the stream to the set of receivers on their ip's and ports.
please suggest me whether multicasting this stream is the job of server (we need to do some networking stuff) or we need to do this by our java code by writing a code that runs on multicast server and transmits the stream to a set of users.
Note
in practical
in my company network i changed my server IP to 224.224.224.24 and tried to run the codes.

You might try:
224.112.112.112 22222
I had a lot of problems getting multicasting working back in the day, but it was because I was using an invalid address.
:-/

Numbers : add more then 1 row at the same time

I have a file with +/- 1800 rows.
Header 1
Header 2
Header 3
0
Name1
Firstname1
0
Name2
Firstname2
0
Name3
Firstname3
Under every row I have to put 5 empty rows (aliases)
Header 1
Header 2
Header 3
0
Name1
Firstname1
1
empty
empty
2
emtpy
empty
3
empty
empty
4
empty
empty
5
empty
empty
0
Name2
Firstname2
1
empty
empty
2
empty
empty
3
empty
empty
Is this possible to do that in a single command?

Hi Jorg,
Create another table with empty rows. Select five of those rows and copy
Click on the row number of your first table where you want to insert rows
Menu > Insert > Copied Rows
If you don't copy anything else, those five rows will stay on the clipboard and you can repeat Insert > Copied Rows in your first table.
Regards,
Ian.

Question about more then 1 iPod on the same computer

I exchanged my iPod for a new one. Will the computer accept the new iPod? I will no longer use the old one. Is there anything else that I should know about?

You should have no problems. iTunes 7 will do the rest for you.

Search more then one face in the same photo

Hi all
Is there a metod to search all phtotos that contain, for example, "Dug" and "Larry"?
I have tried "Dug AND Larry" or "Dug && Larry" but it doesn't work.
Thank you.

File -> New Smart Album
Set it to "All"
Face -> Is -> Doug
+
Face -> Is -> Larry
Regards
TD

OSS doesn't play more than 1 sound at the same time [SOLVED]

Hello,
I use OSS to replace ALSA, it used to work properly here. Today I noticed that I can't play more than one sound at the same time, something which I used to be able to do.
Also, ossxmix doesn't operate properly (I can't control the volume of a specific program).
Looks like a permissions issue, because /dev/dsp and /dev/oss are created as root and other users get Permission Denied.
Any ideas how to fix it? My sound card is an AC'97 onboard.
Thanks!
EDIT: Solved by pacman -R oss, rm -rf /usr/lib/oss then pacman -S oss. Seems to have worked.
Last edited by Renan Birck (2009-01-02 23:06:35)

Hello Angela,
Have you tried resetting the iPod yet to see if that makes a difference? To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
If that doesn't work, a restore of the iPod via iTunes may be in order.
B-rock

Is there a way to put an item under more than one calendar at the same time?

I use the calendar to keep track of not only my schedule, but my entire family's. For years I had a calendar labeled 'kids.' Now as they're getting older it would be easier to have an individual calendar for each child. Easier for me to track where they are and they could have they're own calendar on their iphone or iphone touch since we all share one cloud account. However, frequently more than one is at the same activity. The calendar program will only allow me to select one calendar to place an event under; as soon as I select another, it deselects the first. Is there a way to place an event under more than one calendar?
(Since I'm still the one driving that needs to know date, time, place, etc type details I don't want them adding it to their own schedule - maybe - on their devides and synching through cloud)

You can create many calendars. Here's the tip:
Example: you have 1 son and 1 daughter.
In iCloud ( https://www.icloud.com )
Create 1 calendar called Son ( Choose a color to tell them apart )
Create 1 calendar called Daughter ( Ditto )
Create 1 calendar called Kids
Since you are the creator, you get to see all calendars combined.
Send invitations to each of them
Son gets Son and Kids calendars
Daughter gets Daughter and Kids calendars
So if there an event for Son, just put in that calendar
If it's for both then enter it in the Kids calendar
Likewise for daughter.

More than one reports at the same time?

Hello
Is there any way that i can call more than one reports at the same time through the .FMX file. At the moment i can call only one report, if i need to call another report then i have to close the 1st report, then it will show me the 2nd report. Report Background Engine can run more than one reports at the same time?
Nametullah kalair

Yes i know, we can submit multiple - asynchronous- jobs, but the problem is, is not possible to open more than one previewer to see multiple reports at the same time for analysis.
Regards,
Nametullah kalair

HT1657 Can you rent more than one movie at the same time?

Can you rent more than one movie at the same time on itunes?

I think Justin is correct and you should have statistics in place and a reasonable partition scheme so that the optimizer selects the correct partitions rather than telling it what to do. You paid a lot for partitioning after all.
There are some, possibly misguided, examples in the manuals showing how to create a view so you can delete from a single partition without specifying the partition criteria in the delete statement. This in effect turns partitioning back into DIY partitioning i.e. separate tables, union all and pretend its a single logical table using a view. But backwards.
So to do what you want you just assume the partitions are separate tables, and then use union all to glue the ones you want back together.
select * from sales partition (sales_q1_2000)
union all
select * from sales partition (sales_q1_2001)
union all
select * from sales partition (sales_q1_2003)
union all
select * from sales partition (sales_q1_2004);It probably goes without saying that as well as making the expensive version of partitioning behave like the free alternative, there is the possibility that it will perform like it as well.

Ordering more then 2 ipads2 at the same address?

Similar Messages

Maybe you are looking for