Ordering of records after export

I have a peculiar probelm, the order of records changes when exporting data (by dump) from one machine to another. Both are different type of laptop m/c. Both uses personal Oracle. Presently we are not able to simulate the same problem because of the lack of setup.

Hi Katie,
Click on "Library" and then you should see some columns on the top of the window, just like "Name", "Album", "Time", "Genre"... Just click one time over the "Album" column and all your songs will change to the correct order...
Hope it helps.

Similar Messages

I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning?

I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning? Presently after exporting and burning each photo is identified by the file name rather than each individual title description.

File name and Title are not the same thing.
Filename is attached to the Jpeg file in the Finder.
Title is attached to the photo within the Jpeg file - as is the description. These are written to the Exif and IPTC metadata on export.
So: File -> Export. Kind: Jpeg or Tiff and Check the box at 'Title and Keywords'. This will write the Title, keywords and descriptions (though not explicitly stated) to the metadata. This can then be viewed in any app that understand this material.
You can choose, if you wish, to also use the Title as a Filename - that's an option at File Name
Regards
TD

After exporting screen recording, just shows a black video.

I've recorded an hour and a half of screen recorded footage. it plays back just fine. It exports fine too! the problem is, once I try to open it after exporting it to desktop,iTunes etc., it doesn't have audio or video. Just a black screen for the whole duration. it'll still play, but it plays all black, no audio... Ultimately, I just want it on my third generation iPad. It wont play back with iTunes, on my iPad or even with Preview. I've tried exporting it in iPad format and in normal 720P mode. so .m4v and .mov .My iMac is 1080P so I should be able to export a 720P screen recording. I was thinking that was the problem. it wont show video to a 480P video when I exported it 720P.. i didn't wanna export 1080P cause it was like 9 GB! any help please? i've messed around with this for days.

Hi ChuckSott
Some questions to help us help you!
# Which websites are causing this problem? A few examples would be grand!
# Does this problem occur in FF35 for Android?
# If you could post a screenshot of the tab's full display being blacked out that would be super helpful
# Have you tried temporarily uninstalling all the add-ons in Tools -> Add-ons? Sometimes add-ons break Firefox!
# Finally what version of Android OS are you using? (ice cream sandwich 4.0, jellybean 4.1-4.3, kitkat 4.4? etc)

Track stops recording after about an hour

Hi Everyone,
I am trying to record from some old tapes in order to create mp3s. The track stops recording after about one hour. The Tape is over one hour long. I read about a similiar problem in the forum and tried dragging the purple timeline marker to the right but it won't move any further. What is this called and what does it do? I also read about changing the sampling rate, but I cannot find where to do this. Where do I find documentation on this?
Many Thanks for any suggestions.
Regards,
Bill

Garageband 3 doesn't record more than 1999 beats (GB2: 999). Since in your case the beats don´t matter, you can lower the tempo to the minimum (40 bpm) to get a maximum recording time of 3:18:48.
As for the sample rate: You can't change the export sample rate of GB, it's always 16 bit, 44.1 kbit/s (internally GB works with a higher resolution).

Quality not the same after exporting movie made up of jpg images

Basically I made an animation sequence on Autodesk Maya and rendered the sequence as 2000 jpeg images each representing 1 frame, put it in one folder and on Adobe Premiere imported and dragged the folder into the timeline to make a moving image so in other words my video is made up of hundreds of jpg images.
Now on the editor it all looks HD and fine but when I export it via file > export > media, in order to match the sequence to the screen I must click on 'match sequence settings' which will snap the whole movie into the window rather than have it widescreen and once I do this I can't modify anything else such as codec, etc (codec is automatically set as MPEG -Frame and the output automatically is mpeg), is this normal? Why is it mpeg ajnd not avi...
So once I export the video with these settings (image uploaded) the quality is ok but not as good as what I see in the Premeire editor, why? What can I do to improve the quality?
On the other hand if I don't click on match to sequence settings and personally customise the paramaters such as avi, I use max settings for many things but after exporting my picture quality actually goes worse compared tomatch to sequence settings? (which has less parameters)
Why is this happening, all my jpeg images are high quality 720p and I should just be able to export it as normal...
I am trying to make a cut-scene to get into Unity so the codec is important as well.
How can I make my video best quality as possible being mpeg or avi? What settings do I need to play with?

Maybe I misunderstood, but did you actually put 2000 still images on the timeline? If so, there is another way. Go to Import and find your folder, and select only the first still in your sequence, then check the box at the bottom of the import windows that says "Numbered Sequence" or something like that. This will import the stills as a "video" clip.
Regarding Export, don't check Frame Blending or Max Render, the first being for a change of frame rate and the latter being useful for a downscale of the frame size.You are doing neither.
Also, never use "Match Sequence Settings". Leave that unchecked, and then choose whatever format YOU want to use for the export, whether .avi or H.264 or whatever.
Thanks
Jeff Pulera
Safe Harbor Computers

Duplication of records after trasport to BI PRD

Hi all,
I am facing problem of duplication of the records after transporting to production environment. The same is running fine in Dev.
This development is based on function module. Please suggest if anyone has an idea. I have attached FM code for reference.
amit shetye.
FUNCTION zmmf_pacm.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZMMS_PACM OPTIONAL
Maximum number of lines for DB table
STATICS: s_s_if TYPE srsc_s_if_simple,
           s_counter_datapakid LIKE sy-tabix,
           s_cursor TYPE cursor.
RANGES: s_werks FOR t001w-werks,
          s_ekorg FOR ekko-ekorg,
          s_matnr FOR mara-matnr,
          s_matkl FOR mara-matkl,
          s_spmon FOR s031-spmon.
DATA: l_s_select TYPE srsc_s_select.
IF i_initflag = sbiwa_c_flag_on.
Check Data Source validity
    CASE i_dsource.
      WHEN 'ZMMF_PACM'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE e009(r3). ENDIF.
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  i_dsource   "message variable 1
                  ' '.                 "message variable 2
        RAISE error_passed_to_mess_handler.
    ENDCASE.
    APPEND LINES OF i_t_select TO s_s_if-t_select.
    s_s_if-requnr    = i_requnr.
    s_s_if-dsource = i_dsource.
    s_s_if-maxsize   = i_maxsize.
    CLEAR : sy-index.
    APPEND LINES OF i_t_fields TO s_s_if-t_fields.
ELSE.                 "Initialization mode or data extraction ?
    LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'WERKS'.
      MOVE-CORRESPONDING l_s_select TO s_werks.
      APPEND s_werks.
    ENDLOOP.
    LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'EKORG'.
      MOVE-CORRESPONDING l_s_select TO s_ekorg.
      APPEND s_ekorg.
    ENDLOOP.
    LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'MATNR'.
      MOVE-CORRESPONDING l_s_select TO s_matnr.
      APPEND s_matnr.
    ENDLOOP.
    LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'MATKL'.
      MOVE-CORRESPONDING l_s_select TO s_matkl.
      APPEND s_matkl.
    ENDLOOP.
    LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'SPMON'.
      MOVE-CORRESPONDING l_s_select TO s_spmon.
      APPEND s_spmon.
    ENDLOOP.
viswa
START-OF-SELECTION.                                                  *
*START-OF-SELECTION.
    CONCATENATE s_spmon-low '01' INTO w_date.
    CONCATENATE s_spmon-high '01' INTO w_date1.
    CALL FUNCTION 'MM_LAST_DAY_OF_MONTHS'
      EXPORTING
        day_in            = w_date1
      IMPORTING
        last_day_of_month = w_date2.
EXCEPTIONS
DAY_IN_NO_DATE          = 1
OTHERS                  = 2          .
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    r_date-sign   = 'I'.
    r_date-option = 'BT'.
    r_date-low    = w_date.
    r_date-high   = w_date2.
    APPEND r_date.
    CLEAR r_date.
    r_werks-sign   = 'I'.
    r_werks-option = 'BT'.
    r_werks-low    = s_werks.
    r_werks-high   = s_werks.
    APPEND r_werks.
    CLEAR r_werks.
***********mov types**************
    r_bwart-sign = 'I'.
    r_bwart-option = 'EQ'.
    r_bwart-low = '101'.
    APPEND r_bwart.
    CLEAR r_bwart.
    r_bwart-sign = 'I'.
    r_bwart-option = 'EQ'.
    r_bwart-low = '102'.
    APPEND r_bwart.
    CLEAR r_bwart.
    r_bwart-sign = 'I'.
    r_bwart-option = 'EQ'.
    r_bwart-low = '122'.
    APPEND r_bwart.
    CLEAR r_bwart.
r_matnr-sign = 'I'.
r_matnr-option = 'BT'.
r_matnr-low = p_matnr.
r_matnr-high = p_matnr.
APPEND r_matnr.
CLEAR r_matnr.
    CLEAR : list, list[].
    FREE : list, list[].
    SUBMIT zmmr_mdl WITH matnr IN s_matnr
                     WITH werks IN s_werks
                     WITH bwart IN r_bwart
                     WITH budat IN r_date
                     WITH ar_flag = 'X'
                     AND RETURN.
    IMPORT list FROM MEMORY ID '%%LIST%%'.
    FREE MEMORY ID '%%LIST%%'.
    DELETE list WHERE   bwart = '101'
                        AND shkzg = 'H'.
    DELETE list WHERE   bwart = '102'
                        AND shkzg = 'S'.
    DELETE list WHERE   bwart = '122'
                         AND shkzg = 'S'.
DELETE list WHERE ebeln = space.
    SELECT ebeln
           ekorg FROM ekko INTO TABLE t_ekko
           FOR ALL ENTRIES IN list
           WHERE ebeln = list-ebeln
           AND ekorg IN s_ekorg.
    SELECT ebeln
           ebelp
           matnr
           werks
           matkl FROM ekpo INTO TABLE t_ekpo
           FOR ALL ENTRIES IN t_ekko
           WHERE ebeln = t_ekko-ebeln
           AND werks IN s_werks
           AND matnr IN s_matnr
           AND matkl IN s_matkl.
    LOOP AT list.
   LOOP AT t_ekpo WHERE werks = list-werks
                     AND ebeln = list-ebeln
                     AND matnr = list-matnr.
      READ TABLE t_ekpo WITH KEY werks = list-werks
                                 ebeln = list-ebeln
                                 matnr = list-matnr.
      READ TABLE t_ekko WITH KEY ebeln = t_ekpo-ebeln.
      IF sy-subrc = 0.
        MOVE:list-ebeln TO t_final-ebeln,
             list-werks TO t_final-werks,
             list-budat TO t_final-budat,
             list-menge TO t_final-menge,
             list-dmbtr TO t_final-dmbtr,
             list-meins TO t_final-meins,
             t_ekko-ekorg TO t_final-ekorg,
             t_ekpo-matnr TO t_final-matnr,
             t_ekpo-matkl TO t_final-matkl.
      ENDIF.
   ENDLOOP.
      APPEND t_final.
      CLEAR t_final.
    ENDLOOP.
    DATA : ind TYPE i.
    DATA : ind1 TYPE i.
    DATA : p_size LIKE s_s_if-maxsize.
    t1 = t1 + 1.
    IF t1 > 1.
      ind1 = 1.
      DO t1 TIMES.
        IF ind1 NE 1.
          DELETE t_final FROM 1 TO s_s_if-maxsize.
        ENDIF.
        ind1 = ind1 + 1.
      ENDDO.
    ENDIF.
    DATA:w_wgbez LIKE t023t-wgbez,
          w_mtart LIKE mara-mtart.
    LOOP AT t_final.
      ind = ind + 1.
      IF s_s_if-maxsize GE ind.
        e_t_data-werks    = t_final-werks.
        e_t_data-ekorg    = t_final-ekorg.
        e_t_data-matkl    = t_final-matkl.
        SELECT SINGLE wgbez FROM t023t INTO w_wgbez WHERE matkl = e_t_data-matkl.
        e_t_data-wgbez = w_wgbez.
        SELECT SINGLE mtart FROM mara INTO w_mtart WHERE matnr = t_final-matnr.
        e_t_data-mtart = w_mtart.
        IF t_final-budat+4(2) = '01'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-jan_qty   = t_final-menge.
          e_t_data-jan_val   = t_final-dmbtr.
          IF NOT e_t_data-jan_qty IS INITIAL.
            e_t_data-jan_avg = e_t_data-jan_val / e_t_data-jan_qty.
          ENDIF.
          v_jan = t_final-budat+2(2).
        ELSEIF t_final-budat+4(2) = '02'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-feb_qty   = t_final-menge.
          e_t_data-feb_val = t_final-dmbtr.
          IF NOT e_t_data-feb_qty IS INITIAL.
            e_t_data-feb_avg = e_t_data-feb_val / e_t_data-feb_qty.
          ENDIF.
          v_feb = t_final-budat+2(2).
        ELSEIF t_final-budat+4(2) = '03'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-mar_qty   = t_final-menge.
          e_t_data-mar_val   = t_final-dmbtr.
          IF NOT e_t_data-mar_qty IS INITIAL.
            e_t_data-mar_avg = e_t_data-mar_val / e_t_data-mar_qty.
          ENDIF.
          v_mar = t_final-budat+2(2).
        ELSEIF t_final-budat+4(2) = '04'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-apr_qty   = t_final-menge.
          e_t_data-apr_val   = t_final-dmbtr.
          IF NOT e_t_data-apr_qty IS INITIAL.
            e_t_data-apr_avg = e_t_data-apr_val / e_t_data-apr_qty.
          ENDIF.
          v_apr = t_final-budat+2(2).
        ELSEIF t_final-budat+4(2) = '05'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-may_qty   = t_final-menge.
          e_t_data-may_val   = t_final-dmbtr.
          IF NOT e_t_data-may_qty IS INITIAL.
            e_t_data-may_avg = e_t_data-may_val / e_t_data-may_qty.
          ENDIF.
          v_may = t_final-budat+2(2).
        ELSEIF t_final-budat+4(2) = '06'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-jun_qty = t_final-menge.
          e_t_data-jun_val   = t_final-dmbtr.
          IF NOT e_t_data-jun_qty IS INITIAL.
            e_t_data-jun_avg = e_t_data-jun_val / e_t_data-jun_qty.
          ENDIF.
          v_jun = t_final-budat+2(2).
        ELSEIF t_final-budat+4(2) = '07'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-jul_qty   = t_final-menge.
          e_t_data-jul_val   = t_final-dmbtr.
          IF NOT e_t_data-jul_qty IS INITIAL.
            e_t_data-jul_avg = e_t_data-jul_val / e_t_data-jul_qty .
          ENDIF.
          v_jul = t_final-budat+2(2).
        ELSEIF t_final-budat+4(2) = '08'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-aug_qty = t_final-menge.
          e_t_data-aug_val    = t_final-dmbtr.
          IF NOT e_t_data-aug_qty IS INITIAL.
            e_t_data-aug_avg = e_t_data-aug_val / e_t_data-aug_qty.
          ENDIF.
          v_aug = t_final-budat+2(2).
        ELSEIF t_final-budat+4(2) = '09'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-sep_qty   = t_final-menge.
          e_t_data-sep_val   = t_final-dmbtr.
          IF NOT e_t_data-sep_qty IS INITIAL.
            e_t_data-sep_avg = e_t_data-sep_val / e_t_data-sep_qty.
          ENDIF.
          v_sep = t_final-budat+2(2).
        ELSEIF t_final-budat+4(2) = '10'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-oct_qty   = t_final-menge.
          e_t_data-oct_val   = t_final-dmbtr.
          IF NOT e_t_data-oct_qty IS INITIAL.
            e_t_data-oct_avg = e_t_data-oct_val / e_t_data-oct_qty.
          ENDIF.
          v_oct = t_final-budat+2(2).
        ELSEIF t_final-budat+4(2) = '11'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-nov_qty   = t_final-menge.
          e_t_data-nov_val   = t_final-dmbtr.
          IF NOT e_t_data-nov_qty IS INITIAL.
            e_t_data-nov_avg = e_t_data-nov_val / e_t_data-nov_qty.
          ENDIF.
          v_nov = t_final-budat+2(2).
        ELSEIF t_final-budat+4(2) = '12'.
          e_t_data-meins    = t_final-meins.
          e_t_data-matnr    = t_final-matnr.
          e_t_data-spmon    = t_final-budat+0(6).
          e_t_data-dec_qty   = t_final-menge.
          e_t_data-dec_val   = t_final-dmbtr.
          IF NOT e_t_data-dec_qty IS INITIAL.
            e_t_data-dec_avg = e_t_data-dec_val / e_t_data-dec_qty.
          ENDIF.
        ENDIF.
        v_dec = t_final-budat+2(2).
        e_t_data-till_qty = e_t_data-jan_qty + e_t_data-feb_qty + e_t_data-mar_qty + e_t_data-apr_qty +
                 e_t_data-may_qty + e_t_data-jun_qty + e_t_data-jul_qty + e_t_data-aug_qty + e_t_data-sep_qty
                + e_t_data-oct_qty + e_t_data-nov_qty + e_t_data-dec_qty.
        e_t_data-till_val = e_t_data-jan_val + e_t_data-feb_val + e_t_data-mar_val + e_t_data-apr_val +
                e_t_data-may_val + e_t_data-jun_val + e_t_data-jul_val + e_t_data-aug_val + e_t_data-sep_val
                + e_t_data-oct_val + e_t_data-nov_val + e_t_data-dec_val.
        IF NOT e_t_data-till_qty IS INITIAL.
          e_t_data-till_avg = e_t_data-till_val / e_t_data-till_qty.
        ENDIF.
        CLEAR w_maktx.
        SELECT SINGLE maktx FROM makt INTO w_maktx WHERE matnr = t_final-matnr.
        e_t_data-maktx   = w_maktx.
        APPEND e_t_data.
        CLEAR :e_t_data,w_wgbez,w_mtart.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFUNCTION.

thanks

Black flashes appear every 2 seconds after exporting from final cut pro

http://www.youtube.com/watch?v=b8jJNnk4s3g here is my video as an example of what is happening. It only shows up after exporting and on the original AVI footage, and not my outro footage which was a .mov.
Please can somebody help me figure out what is wrong with it as it is happening with every video I try to make using the AVI filed my camcorder records in.

AVI is not a supported wrapper in FCP (and who knows what's the codec)
You probably should convert the material to an natively editable format before you bring it in to FCP. Mpeg Streamclip is a good app for this purpose. What format you convert to depends on the size and framerate of the original media.
x

Colors washed out in lightroom but not after export

I'm new to Lighroom and don't really have a workflow sorted out. I'm shooting with a Canon 30D and shooting Raw+Jpeg until I learn enough to confidently handle raw files. If I adjust the images in lightroom so that they don't appear lifeless and grey by adding lots of saturation, when I export to jpeg and then view with windows picture viewer to see what the images would look like on Zenfolio in SRGB they are grossly over saturated and clownish. My monitor(Dell 2005FPW) is not calibrated with a calibrator but I am using the adobe prophoto icc profile in an effort to have some color management as I understand that is what Lightroom/CS3 uses. I'm not printing yet but hope to some day, for now I'd just like to upload some photo's to Zenfolio and share with friends and family but as it sits Lightroom is totally unusable as I have to guess what it will look like after export. I'm certain it's something I'm doing wrong or missing and I'm hoping someone can tell me what that is. Thanks in advance, Veet

Thanks for all the replies, I was beginning to think I was on my own,I'm very happy this thread finally came to life. I did use an adobe Monitor profile (Prophoto) as I thought that was the color space used by LR and had read in some other thread that I should use it. I tried using my supplied profile (2005fpw.icm) and I get an error message from Photoshop stating "The Monitor profile"Dell 2005FPW color profile" appears to be defective please rerun your monitors calibration software. I then have the option to ignore the profile or to use it anyways. I actually stumbled accross the huelight ACR's and tried them out but that didn't help. Photoshop has the same bland lifeless look as LR does. I d/l a trial of Elements 5 and it was also the same so it's adobe across the board. Color space and color management are totally new concepts for me
so I'm really at a disadvantage trying to trouble shoot this, I can bandy these terms about, but I suspect I don't really grok them fully as of yet. I'll be happy when I finally get my monitor calibrated, I understand now that it won't be a magic "fix all" :( but at least I'll have a solid point to begin building a color managed system. Other Raw converters don't seem to have this problem but as I am just now developing my workflow I'd like to master one program and I think I'd like that to be LR as it seems to be the one that encompasses the entire workflow ie. rating,cataloging,flagging ect. and I feel it would probably mesh best with Photoshop which I also plan to learn/use. I'm feeling pretty stuck and not very inspired to shoot atm as the exposures just keep piling up and aren't being integrated or dealt with appropriately. I don't have auto tone checked off and I'll see if I can track down an updated driver/profile for my monitor, one which isn't "defective" as Adobe puts it. Thank you for all the replies, I will get this resolved eventually and any help you guys can give me is more than appreciated.
A few questions should I shoot Adobe RBG or SRGB from the camera and does it matter for RAW? My understanding was that in order to use 16 bit I needed to be in AdobeRBG.
Which profile should I use for photoshop? as I can set the color space in it
After I calibrate my monitor will I be able to use that profile for the various pieces of software I'll be using?
I think I have Color Profile and Color Space meshed in my mind and thats probably very wrong. Thanks, Veet

Costing affect with MRP at planned order level and after production order

Dear all,
How the costing affect with MRP at planned order level and after production order completion?
Edited by: Maulik on Jun 24, 2009 1:59 PM

Dear Maulik,
check Mr. Vinod's inputs abt costing
1. Maintain following master data:
MM01 Material Master with Costing and accounting view. Make sure all the cost Std, Moving avg etc is maintained along with valuation class in Accounting view 1. In costing tab pls make sure "with qty structure" and "Material Origin" are ticked.
CS01 BOM with components marked with costing relevance in Status/Long Text Tab. Also check all the qty are correct.
CR01 Work Center in Basic data tab maintain standard value key sau SAP1 and in costing tab maintain the workcenter, activity type and formulas (Usually standard formulas like for Machine Hours SAP006, Labour SAP007, Setup Activity SAP005 is used).
KL01 Cretae activity types, in basic data tab maintain ATyp Category AS "1" and cost element (as provided by your FI Guy).
KP26 Activity pricing, here with the combination of Activity type and the cost center you assign price to the activity.
2. SPRO Activity
Maintain Costing sheet IMGControllingProd cost controllingProd Cost PlanningBasic settingoverheadsdefine costing sheet.
OKKN Define costing variant, you define costing type (In the costing type, you define the purpose of a material cost estimate by specifying, for example, which field in the material master record the costing results can be transferred to like std price, moving avg etc), Valuation Variant (defines how the prices are prioratized), date control and transfer structure.
3. Costing Process Flow:
1. CK11N CREATE COSTING RUN
2. CK24 CREATE PRICE UPDATE (You Mark and release the prce to be updated)
4. COSTING VARIANT WRT PP
1. OPL1 DEFINE COSTING VARIANT WRT PP
2. OKK4 or OPN2 DEFINE VALUATION VARIANT
3. OKK1 or OPM1 DEFINE COSTING TYPE
4. OPL8 ORDERTYPE DEPENDENT PARAMETER (assign the above creted costing type for both planned and actual)
Hope this will throw some light on product costing.
Regards
kumar

Poor audio quality after exporting to .MOV.

Voiceover in my video sounds crystal clear in the timeline but then thin and "rattley" after export when playing back with Quicktime player. Background music on other tracks always seems to be unaffected. Audio export set to AAC, 48 kHZ, Stereo. I must export to a Quicktime .mov format because it's the only file type that I can upload to YouTube without the color quality being distorted after upload. Adobe Updater says all of my programs are updated.
Any help would be greatly appreciated. Thanks!

How did you record the VO? is it a mono or stereo track, how are you viewing the export. Sometimes when just one section of the audio is wrong it is due to audio phase problems, I have not seen this with a vo before but it might be the issue. See:
Re: 1 of 2 audio tracks missing on certain browsers (h.264)

Sound problems after export media in premiere pro cs6

hello,
i recently started usining premiere c6 and after exported my project to mpeg-dvd i noticed that sound quality is reasonably lost, than exported sound separatedly without video to wav and result was the same bad. The imported sound source was really good, recorded in studio- wav 24 bit 48000. Before i used cs3 and never had such a sound problem after export video.
thank you very much,
Poly

It's difficult to speculate without hearing the original and the export. Can you upload them?
https://www.depositfiles.com/en/

Flickering after export

Hi, i have some flickering troubles after export in several videos i made.
These videos are quite easy, short and with a few effects. Generally they are made with ten video tracks and only 1 audio track.
These flickerings appear randomly in the video output, despite the preview was great. Normally the flickering appears not in the transitions between two video tracks, but inside one.
Actually i found a "solution": i cancel the video track with the flickering from the timeline and replace it from the video list. After this move, the export often doesn't go wrong, but this seems more a matter of luck than a final solution.
So, can anyone help me?
Here i report some data about my work.
I have a small videocamera that records in fullhd at 25fps and i use premiere cs4.
Input: avchd 1080p25, progressive
Output: h.264 - ntsc - 1280x720 - 25fps - progressive - vbr 1 - bitrate 6 mbps - max 9 - high profile - level 4,1
Unfortunately i haven't a high performance pc: i5-3450, 3.1 ghz; ram 8 gb; nvidia geforce gt 640, 2 gb.
Thanks, Simon!

Unfortunately I can't change the video source to 25 fps, the reason for this is unknown, I spoke to a customer support person and he told me that it automatically detects the video signal detection which is 1920x1080 being displayed at 30 fps.
This is coming from my xbox which is PAL, and I am playing a PAL game, all very confusing.

No stereo from iPhone after export?

A movie made with iPhine 4 footage played "stereo" sound from the timeline. (borth channels sound)
After uploading it to you yube: stereo. (both channels sound)
after exporting to .mov: no stereo!, one chanal empthy, one sound!
I did it twice after total restart the mbpro: the same as in 3.
I went to the inspector, (audio) and changed 'none' to: 'stereo l/r' and exported again: yes; stereo! both channels sound.
But how is this possible? and is this normal?
Thanks fot suggestions!
bruce

I think the iPhone can only record in mono..... I haven't found a way to capture stereo yet.

Shaky Video after export

Hello. I've posted on this before, but havent quite found my answer.
I have video with some motion in it that looks shaky when I burn it to DVD. Someone suggested that I try adding the De-Interlace filter to correct it, but that doesnt seem to be it. I can watch the video from FCE on a TV going thru my camera and it looks fine (with or without the De-interlace filter). But when I export the video as a self contained movie, then pull it in to toast, and burn a DVD, the motion looks bad on the DVD. I also tried going thru iDVD, and there it looked even worse.
This problem is new to me. I've had video with motion before and didnt have this issue.
Any ideas????
Thanks!

I also read your earlier posts on this topic.
From your description I'd exclude de-interlacing and the field dominance problem: you detect these issues before burning if you Print to Video or playback through the firewire connection to a interlaced TV. And you did that.
So export might be the problem. Let me however suggest a test to check if the Export process from FCE or the burning process by Toast or iDVD is the issue.
After export you could try to open the exported .mov (with Export/QuickTime Movie !) using QT Pro, open the property window (cmd-J), select the video track, open the view settings (or something alike, I have the Italian version...) and check High Quality. Then in the main window if you go through the shaky part frame by frame (right arrow) you should see how each frame looks:
- If a frame has a comb effect (due to the fact that its 2 fields have different timing) that's not necessarily bad: what you see is interlacing, that should be correctly handled by the playback device (whether through firewire from FCE or when recorded on DVD).
- But if frames jump back and forth, then you might have a field dominance problem.
If interlacing or field dominance is a problem, however as I said above, you should see it also when you watch the movie connected to a TV.
To cross check, in FCE you can set the canvas window to 100% (no more e no less) and repeat the frame by frame test I suggest above in QT Pro: if the behaviour is the same the problem is in the use of Toast or iDVD, if they behave differently in FCE (better) and QT (worse), then Export is the culprit.
This doesn't solve your issue, but it might help in understand it.
I hope I did not confuse your ideas...
Piero

Help with exporting. Video looks horrible after export, but great when in premiere pro

Hey guys, looking for some advice on exporting.
When I finish a video, the color and everything looks great while in premiere pro, but after exporting it, the color ends up looking dull and the whole video looks blurry. I'm filming with a canon vixia hf200 at 60i. It imports as a AVCHD file, I deinterlace it, and then export at the Vimeo HD settings. What can be causing the video to look horrible after exporting? What settings should I be exporting under? Any help would be appreciated!

It looks like you're coming up against some of the colorspace handling issues that the Premiere pipeline has.
Since your source is 60i AVCHD it's HD and thus rec709 colorspace. If it gets encoded with the standard rec601 colorspace (SD sizes are this) then all the colors get crushed. Look for a "709" and "601" radio button in your export settings. If it's not there you're out of luck.
The "blurry" is probably a poor quality de-interlacer. If Vimeo permits interlaced vs progressive do that instead. it's always cleaner to stay in the same video format all the way through.
TECHNICAL ASIDE:
rec709 is a triangle of possible colors that can be expressed by mixing of ratios of 3 emitters (the R G B corners of the triangle). (they are the RGB phosphors of a CRT and now LCD pixel elements)
rec709 is a bigger triangle than rec601 so it's capable of more colors. but if you accidently map that triangle's corners to the coordinates of rec601 it gets crushed.
In photography the "sRGB" uses the rec709 triangle. A bigger triangle that that is "Adobe RGB". So if you work in Adobe RGB and export to sRGB without conversion the colors get crushed because sRGB in inside the triangle of "Adobe RGB".
http://en.wikipedia.org/wiki/Srgb
http://en.wikipedia.org/wiki/Rec._709
http://upload.wikimedia.org/wikipedia/commons/8/8f/CIExy1931_sRGB.svg

Ordering of records after export

Similar Messages

Maybe you are looking for