Ordering Print errors
This is driving me mad!
On Iphoto5 I could order photos however after upgrading to 6 I now cannot buy photos. Each time iphoto tries to connect to the internet it says "upgrading information" and then says, "a connection could not be established at this time please check your connection".
My connection has remained the same and my date and time is correct - does anyone else have this problem???
Thanks!
Have you tried searching in this forum for that issue. It's been posted and discussed many times with a number of possible solutions mentioned. I just don't have them at my fingertips at this time.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
Similar Messages
-
Hello,
I have two issue with tranfer order
1) We are printing transfer order through network order CN23 .The part has been issued to network order from 3 Group WBS element .So when we are printing the Transfer order it is just printing one WBS element on transfer order not the other two of them.So is there a configuration setting for the trnasfer order to print all the WBS element?
2) When the user is printing tasfer order from his profile LT31 and including all the setting plus defined printer as LOCL the transfer order is not getting printed .Only when he is going to SP02 it is getting printing .So i guess there must be some setting that is missing in printer config .I checked in OMLV but couldnt find one .Can any one pls help.?Thanks for the reply Abhijit.I saw in OMLV in Print code that the printer has been set to 02 so does that mean it is going to Spool? If so how can i change the setting back to print immediately ?what needs to be done in printer setting to get that print immediately.
My first question is related to Transfer order print out .We have network order which has 3 WBS elements from which the component has been issued.So when we print the transfer order via LT31 it is only printing one WBS not the other two of them.So my question is is there a way in config to change the Transfer order so that it print all the WBS element or it should be done via coding? -
Production order printing error in script
Hi ,
I am facing problem while running Tcode co02,
Element BARCODE_AUFNR_MATNR window MAIN is not
defined for form PSFC_PRINT_LAY
This layout is the standard one,no one has modified it.
How to rectify this.
Thanks in advance.
Regards,
BathriHi,
Try searching in the OSS messages if any available or something happened at the time of upgradation or support packs etc.. kind of stuff.
Also can approach SAP OSS help.
Regards,
Santhosh. -
Purchase Order Print Report Compilation Error
Hi,
While compiling the report in Reports Builder Purchase Order Print Report , we get the following error:
identifier GET_PRECISION must be declared.
Where as this is a seeded function inbuild in the Program Units.
Also while compiling on server we get the error.
Cannot convert rdf to rep.
Thanks,
Angelica.Couldn't find how to copy the PO layout over using copy express.
I did compare the RDOC fields for POR20002 in both databases and they are Identical.
In Crystal Reports, I did a formula search for N_Decimal_Places and it found nothing. Then I did a search for 'length' in all formulas and it finds length in N_Decimal_Places. When I double click on N_Decimal_Places it clears the screen and never shows the formula. This happens in both layouts for my test database and SBODemoUS.
Again, SBODemoUS works correctly and AAA_TEST give the error. -
Purchase order print program error
hi experts!
am facing a problem in my purchase order print program. the problem is that when i am trying to see the print preview the following dump error is throughing, which am not able to understand.
the P.O total amount should be change into words( like one million then thousand thirty three kuwait dinars)
but the total amount is not converting into as mentioned, instead the dump is encountered.
please give me solution,
thnaks
*DUMP*
Runtime Errors CONVT_NO_NUMBER
Exception CX_SY_CONVERSION_NO_NUMBER
Date and Time 05.05.2008 19:04:43
Short text
Unable to interpret "1760,778.71 " as a number.
What happened?
Error in the ABAP Application Program
The current ABAP program "ZMM_SUBROUTINES" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', was not
caught in
procedure "GET_AMT_IN_WORDS" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program attempted to interpret the value "1760,778.71 " as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
How to correct the error
Whole numbers are represented in ABAP as a sequence of numbers, possibly
with an algebraic sign.
The following are the possibilities for the representation of floating
point numbers:
[algebraic sign][mantissa]E[algebraic sign][exponent]
[algebraic sign][whole number part].[fraction part]
For example, -12E+34, +12E-34, 12E34, 12.34
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CONVT_NO_NUMBER" "CX_SY_CONVERSION_NO_NUMBER"
"ZMM_SUBROUTINES" or "ZMM_SUBROUTINES"
"GET_AMT_IN_WORDS"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"GET_AMT_IN_WORDS" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "EHPAP1"
Network address...... "10.100.150.103"
Operating system..... "AIX"
Release.............. "5.3"
Hardware type........ "00C3B3F04C00"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "EHPDB"
Database type..... "DB6"
Database name..... "EHP"
Database user ID.. "SAPEHP"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 19 2007 20:40:49"
create on........ "AIX 2 5 005DD9CD4C00"
Database version. "DB6_81 "
Patch level. 102
Patch text.. " "
Database............. "DB6 08.02., DB6 09."
SAP database version. 700
Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory consumption
Roll.... 16192
EM...... 29328936
Heap.... 0
Page.... 1359872
MM Used. 19180992
MM Free. 1764848
User and Transaction
Client.............. 400
User................ "FADISULAIMAN"
Language key........ "E"
Transaction......... "ME22N "
Program............. "ZMM_SUBROUTINES"
Screen.............. "SAPLMEGUI 0014"
Screen line......... 22
Information on where terminated
Termination occurred in the ABAP program "ZMM_SUBROUTINES" - in
"GET_AMT_IN_WORDS".
The main program was "RM_MEPO_GUI ".
In the source code you have the termination point in line 398
of the (Include) program "ZMM_SUBROUTINES".
The termination is caused because exception "CX_SY_CONVERSION_NO_NUMBER"
occurred in
procedure "GET_AMT_IN_WORDS" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "ZMM_SUBROUTINES "; its source code begins in line
358 of the (Include program "ZMM_SUBROUTINES ".
Source Code Extract
Line SourceCde
368 DATA: lt_spell LIKE spell.
369
370 READ TABLE in_tab WITH KEY 'CURR'.
371 IF sy-subrc = 0.
372 lf_curr = in_tab-value.
373 ENDIF.
374
375 READ TABLE in_tab WITH KEY 'NETWR'.
376 IF sy-subrc = 0.
377 lf_netpr_01 = in_tab-value.
378 REPLACE ',' IN lf_netpr_01 WITH ' '.
379 CONDENSE lf_netpr_01 NO-GAPS.
380
381 IF lf_curr = 'KWD'.
382 lf_netpr_kwd = lf_netpr_01.
383
384 CALL FUNCTION 'SPELL_AMOUNT'
385 EXPORTING
386 amount = lf_netpr_kwd
387 currency = lf_curr
388 filler = ''
389 language = sy-langu
390 IMPORTING
391 in_words = lt_spell
392 EXCEPTIONS
393 not_found = 1
394 too_large = 2
395 OTHERS = 3.
396
397 ELSE.
>>>>> lf_netpr = lf_netpr_01.
399 CALL FUNCTION 'SPELL_AMOUNT'
400 EXPORTING
401 amount = lf_netpr
402 currency = lf_curr
403 filler = ''
404 language = sy-langu
405 IMPORTING
406 in_words = lt_spell
407 EXCEPTIONS
408 not_found = 1
409 too_large = 2
410 OTHERS = 3.
411 ENDIF.
412 IF sy-subrc <> 0.
413 * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
414 * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
415
416 ELSE.
417
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 17
SY-TABIX 1
SY-DBCNT 18
SY-FDPOS 1
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY NORMAL
SY-UCOMM PREVOUTPUT
SY-TITLE Held Imp. Pur. O r - ESG 5000000021 Created by Fadi Sulaiman
SY-MSGTY A
SY-MSGID TD
SY-MSGNO 426
SY-MSGV1 NEXTPAGE
SY-MSGV2 ZMEDRUCK_PO
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20080505
SY-UZEIT 190441
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXITHi Prasad,
Check the FM's
SPELL_AMOUNT --> for display in millions
HR_IN_CHG_INR_WRDS --> for display in lakhs and crores -
Unable to order prints anymore... weird iPhoto error
Hey there,
I'm unable to order prints from iPhoto anymore, it started before the 8.1.1 update. When I start to upload photos to the Kodak server, after 2Mo is transmitted it bugs. In the console I have the following mysterious error :
25/11/09 23:11:00 iPhoto[6419] PUT /Documents/49519329/image_0.jpg (FAILED), httpStatusCode:402, errorType:100, transactionState:5, txnId:A749349E-5655-4459-8EC0-E92E465EC788, auto-retries=0, manual-retries=0
25/11/09 23:11:00 iPhoto[6419] ISCoordinator responseFromUploadFiles: error...
MessengerContext = <ISNewMessengerContext: 0x199b9fa0>;
Retry = YES;
Status = ERROR;
StatusCode = 402;
}I wondered, reading the output from the Error you posted, if it was having trouble finding particular photos:
/Documents/49519329/image_0.jpg (FAILED)
How are you uploading to the Kodak Server? With an app, a plugin to iPhoto, some other way?
Regards
TD -
IW32- order-print is giving error for particular User.
Dear Friends,
IW32- order-print is giving error for particular User and output type. Debugging authorization restricted on the system, hence I canu2019t trace out the problem. If anybody comes across such issues, please reply to the post.
Thanks In Advance for your reply.
Anil Dasari
Thanks In Advance.Hi,
Information about dump:
1. User and Transaction:
Runtime Errors MESSAGE_TYPE_X
Date and Time 06.05.2011 10:47:40
MM Used. 13116304
MM Free. 3639760
User and Transaction
Client.............. 700
User................ "BLADEF01"
Language key........ "N"
Transaction......... "IW32 "
Transactions ID..... "4DC387ECA12B684DE10000001A5B1803"
Program............. "/MRSS/SAPLRSG_PM_ORDER"
Screen.............. "SAPLCOIH 3000"
Screen line......... 33
Information on where terminated
Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
"/MRSS/RSG_MAINTAIN_MRS".
The main program was "SAPLCOIH ".
In the source code you have the termination point in line 441
of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
2. Info. Where it got terminated.
Information on where terminated
Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
"/MRSS/RSG_MAINTAIN_MRS".
The main program was "SAPLCOIH ".
In the source code you have the termination point in line 441
of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
3. How to correct the error.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"/MRSS/SAPLRSG_PM_ORDER" or "/MRSS/LRSG_PM_ORDERU04"
"/MRSS/RSG_MAINTAIN_MRS"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1.1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2.2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3.3. If the problem occurs in a problem of your own or a modified SAP.
I have been searching for notes recently implemented for IW32.
Thanks and Regards,
ANIL DASARI -
Errors ordering prints from Aperture, help?
I've been trying since last night to order prints via Aperture. They total around 150 prints. Last night, I would select my images and they would start to upload. The entire time, Aperture is listed as "application not responding" but the continued to upload. When finished, I got a message that the order was complete and then got a billing error message. I tried again and re-entered my card info, same issue. My billing works fine for the app store (it did before and after the order attempts), it's not a billing issue.
Today, I just entered a different card to see what happens. Everything uploads and it tells me my order is complete. However, I never recieved a receipt and there is no record of my order on the order status page. When I tried to close A3, I get the message "You book is not complete...." so I select to continue uploading...even though the upload is complete. It's being going now like that for 3 hours. This is crazy. I just cancelled the order by closing out A3 now for the 8th time in 2 days...each upload takes about 20-30 minutes to complete. Odd, my connections speeds are currently 22mbps download, 7 upload...a little slower than usual, so the hold up is on Apple's side.
Has anyone had this issue before? Is there a fix for this? I'm going nuts. Thanks for any help!I called Apple Store support. They were stumped too as I had tried everything they recommended, including chaning billing card that I use, etc. Then they found a support document about print ordering issues and getting a white screen (which I don't get), this appears to have solved my issue.
Here is what I did. I did have to do BOTH steps. Please note that "1-Click Settings" is no longer available, so used "Express Checkout" for those steps instead and it was fine. I was able to put through a test order successfully and then cancel it. My large order is now uploading.
Delete the NetServices Keychain item:
Quit Aperture if it is open.
In the Finder, choose Go > Utilities.
Double-click the Keychain Access application in the Utilities folder.
Click Passwords in the Category list on the left side of the window.
Click the NetServices item in the main window and press the delete key to remove it.
Open Aperture and test.
If the above steps do not resolve the issue:
Quit Aperture.
Go to the Apple Online Store.
From the Account menu to the left of the Cart icon, choose "1-Click Settings."
Log in to your account with your Apple ID and password.
Enable 1-Click for your account.
If 1-Click is already enabled, choose Account Information from the Accounts dropdown.
Change the password for your account.
Open Aperture and test.
http://support.apple.com/kb/TS3464?viewlocale=en_US&locale=en_US
Thank you David at Apple! -
when i try to order prints i get an error message saying there is a problem with my network and my network is working. How can i solve this problem?
Try a different media. I have good luck using Maxell discs.
-
Error when trying to order prints through costco
I have Adobe Photoshop Elements 10 running on Windows 7 64 bit. When iclick on Create and Order prints from Costco - the window opens but says "We are sorry, it appears you have encountered an error." Any idea will be appreciated.
I have the same problem. I know this was an issue several months ago, but they fixed the problem and it was working fine. Now, I can't get connected to Costco again. I really like this feature when it works, so hopefully they will get the issue resolved quickly!
I take that back!!! I just tried it again this morning and it is working fine!! Thank you whoever fixed it! -
Network error when ordering prints
I have been trying to order prints of over 1,000 of my photos and they appear to upload just fine and I am able to put in 1 4x6 on all photos. Then, it goes to a grey connecting line, which eventually turns blue. After awhile I get the network error message. I've tried several times over the last week to order the pictures and the same thing happens each time. Is there a limit to how many you can order at once? Do I need to split my order into two separate orders?
Welcome to the Apple Discussions. You very well may be getting timed out on the upload/order process. I'd try splitting the order in two and see if that will go thru unimpeded.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
Hi
When I try to order prints at the largest setting in Aperture, I often get a message stating my image or temp file is larger than 10mb so the order has to be cancelled.
I can't seem to process any prints.
Anyone else seen or resolved this?
Also
If I'm going to export to order from another supplier other than Apple, what's the best file format to export in? I'm thinking tiff jpg or dng?
Hope someone can help.
Thanks
GavinSecond question first. It would be best if you checked with the printer regarding file requirements. Most on-line services will have there requirements listed somewhere on the web site. If not call them. Any good print service will e more then glad to discuss this before you send them work.
As for your first question, I never order prints from Apple but I would imagine that they to have file requirements listed somewhere on the web site. If its telling you that the file size limit is 10mb there isn't much you could do about it except resize your file. But 10mb seems like a low size limit are you sure your reading the message correctly? -
SmartForms: Purchase order Print prog and SLIN
Hi all,
I am on 4.7 and Purchase Order Print Prog name is /SMB10/FM06P. When i am doing SLINE Check on this Prog. I am getting the following Message.
Program: /SMB10/FM06P Row: 1
The namespace of program /SMB10/FM06P has the setting "C" and cannot be tested.
A possible cause for this is that an SAP program is being checked in a customer
system.
Note, the following rule applies after a change in the source code:
For testing the namespace setting is ignored for one week
(The message cannot be hidden using pseudo-comment "#EC .., or by using SET
EXTENDED CHECK OFF/ON)
Is any one have idea about this?
Thanks in advnace.Thanks for your Reply,
When i am doing Syntax check in SE38, I am getting the below error message.
<b>"The Program "/SMB10/FM06P" is not Unicode-compatible, according to its program attributes."</b>
I have found the OSS Note No: 751007
Solution
Copy the program into your own namespace (e.g "ZZsmbfm06p"), maintain the program attribute to make sure the flag "Unicode checks active" is selected. Then maintain the customizing for output control again.
<b><u>
GOD BLESS SAP, SAP asking to Create Custom Object.</u></b>
Thanks
Message was edited by: Vipin Nagpal
Message was edited by: Vipin Nagpal -
Purchase order Print-out in ME22N
Hellow sir,
I am getting an error while taking purchase order print-out in ME22N,system giving the error message Express document "Update was terminated"received from author "Abhishek".Please help me out
Regards,
KirtiHi Kirti,
Notes are seen on service.sap.com not R/3. Please go to service.sap.com ->in SAP Support Portal click on link SAP Note search then in front of number, give the note number and click on ">>" button.
In R/3 you can see whether these notes are implement or not. Basis people see it in transaction SNOTE and the in note browser, you give note number and press F8. If this note is avl, it means it is already implemented.
I still suggest to change config to standard to suspect your programs too. Notes would help to solve problem in standard objects only.
- Sanjeev -
I have problem ordering book. It is the first time then order book with Aperture. With iPhoto I never had this problem.
First: My appleid does not allow me to make order, I always get an error 'Try again later' but when work?
Second: After had used an other appleid (other family member) and order print started to upload images the system stuck and need to shutdown my macbook press the start botton.
Someone can help me?First: My appleid does not allow me to make order, I always get an error 'Try again later' but when work?
This may be caused by the tightened security requirements for your Apple ID. Apple now requires, that the answers to your security questions are at least six characters long, also the password must not be too simple. See the guidelines here:
Apple ID: Tips for protecting the security of your account
If your password and security questions do not match these rules, reset them at My Apple ID.
Second: After had used an other appleid (other family member) and order print started to upload images the system stuck and need to shutdown my macbook press the start botton.
This may happen, if one of the image files cannot be rendered. Is the preview of your book o.k., when you use the preview-book button on the order page?
Regards
Léonie
Maybe you are looking for
-
Migration questions from Exchange 2007 to Exchange 2013
Dear Forum Members, I'd ask just two short questions, regarding a migration from Small Business Server 2008 (Exchange 2007) to 2013. We installed the two Exchange 2013 servers, configured a DAG and updated every single URL (OWA, ECP, AnyWhere, Autodi
-
Quartz bug with movies with alpha - workarounds?
Hello, I've found an odd glitch in Quartz Composer, and would like some help working around it; I created a movie with alpha (32-bit PNG to .mov, PNG, millions+ via QuickTime 7. Tested and it exported correctly) and loaded this using a Movie Importer
-
Reconnecting to the session after loosing connection
Hello Experts, I've done some work within an transaction, not saved it and i've lost the network connection. I connected to SAP again, and as I see in sm04, my previous session is still there. Now I want to get this session back to continue the work.
-
I had a hard disk crash, and I need to download Photoshop version CSS. Where can I download it? Thanks!
-
AccConn 5.3 Override TCP/IP Settings by default
Hi all I use AccConn with predefined profiles - 1x Ethernet - 1x WLAN (with fixed IP Address -> company) - 1x HSPA Access Connections v5.30 I made a LOA Package, everything is working fine, BUT => if I want to create a new WLAN Profile or connect to