Ordering two calendars for delivery at the same adress and paying only one

Hello
I have prepared two calendars with iPhoto. Those two have to be sent to the same adress can you help to find out how I can order these and paying only one fee for postal delivery. I feel that if I order them separately I will pay twice?
Any tip on that one.
Many thanks for apperciated help
Pierre

You can't.
http://www.apple.com/support/photoservices/ordering_options/
Regards
TD

Similar Messages

Two Calendar Windows open at the same time?

I would like to have two calendar windows open at the same time (with different months shown). Is this possible?

Nancy,
That is not possible with the current version of iCal.
If you find a need for that feature, I would invite you to Provide iCal Feedback.
;~)

Have ordered Photoshop Elements 12 and Premiere Elements 12 (for MAC, EN version). Order went through but finally order was cancelled as Adobe Store was unable to approve. Subsequently order was cancelled. did anybody experience the same issue and how to

Have ordered Photoshop Elements 12 and Premiere Elements 12 (for MAC, EN version). Order went through but finally order was cancelled as Adobe Store was unable to approve. Subsequently order was cancelled. did anybody experience the same issue and how to proceed.

Hi there
Please check with your credit card issuer to see why payment is not being approved. When this is resolved you should be able to place a new order.
Thanks
Bev

HT204053 I have multiple apple devices, 2x phones ipad etc, but all are through the same email and I only get the storage space for one device, what should I do?

I have multiple devices all under the same id and email but I don't get multiple icloud storage space and it's running out!
Can anyone help as I've just bought an iphone for my daughter and would like to link it as well.
Thanks in anticipation of your help.

One icloud account gets a 5 GB of storage, regardless of the number of devices connecting to it. But you're in luck, you can buy more storage for the account if you are running low.
As for your daughter, be sure to get her own icloud account, otherwise she'll end up getting all your email, contacts, etc. And if she deletes any of this data, it will be deleted on your devices as well. Note: you can all keep using the same ID for the itunes store for sharing purchased items.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

Can the iphone 5 support two headsets for listening to the same music on the phone?

Can the iphone 5 support two headsets for simultaneous listening to the same music on the phone?

and it will mute a wired headset when connected to bluetooth
using a wired splitter will also 1/2 the volume as well you are putting the headsets in parallel giving each only half of the current sendt from the minijack

How do I change it so two phones aren't using the same username and password?

Hubby and 17 y/o son are using the same user name and password for their iphones. Does anyone know how to change the ID and PW on one phone so it will be separated from the other?

You mean the itunes account? The manual will tell you how to sign out and into another account.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Play two videos or SWF at the same time and play exactly concurrently

Hi Everyone,
I am creating one Flex application in which I have to play two videos concurrently or two SWFs concurrently.
Both the videos of SWFs are overlapped on each other and these videos can be more than two also.
So these all videos will play at the same time but user will feel like that this is a one video or SWF.
And also there is no need of Play & Pause mechanism. It will be ok if its look like any loading SWF.
I want something that can play all the videos or SWFs concurrently. It there will be some mismatch of timing than it will looks very ugly.
Is any component availble to do like this ? Or any other way to do like this ?
Please help me..
I am using Flash Builder 4.5 on windows 7.

Hi Nicky
As Bev. describes in iMovie. Best way !
In FinalCut Express this is very easy. Picture in picture to Video-wall is so easy to do.
Each video on it's own track (up to 99) and turn on VireFrame and change size so that each
video has proper size and place. It's done.
Just the easy ability to change size and rotation (parts of a degree) can do so much difference.
Yours Bengt W

When I want to edit a photo in photoshop, iphoto duplicates the image and I end up with two or three copies of the same photo and they are also duplicated on my computer. This has only occurred since I installed iPhoto 11.

Ever since I installed iPhoto '11 on my computer, I have had a problem with images being duplicated when I want to open an image to edit in Photoshop. I did not realize at first that the images were also duplicated on my computer. This has taken up an incredible amount of space on my computer. Why does this happen? Is there a problem with the software? Can I remove iPhoto and re-install? Would that help?

saUnless you have a copy of your iPhoto 09 library you will have to start over from scratch with a new library and import the Masters file from inside iPhoto 11's library as described here:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Origianls (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects.

Multiple databases with the same name ... only one named DB can be found

Hi All
We are currently in the progress of migrating over to APEX 3.2 from HTMLDB 2.1.
We have 3 instances on each version - DEV, UAT, LIV.
The HTMLDB servers and databases are set up with no problems in grid control. However, the new apex instances are not being found (different servers) - I think this has something to do with the names (global database name) being the same as an existing database that is already configured on GC.
Is there a way around this? as we plan to keep both versions of APEX/HTMLDB running in parallel for at least the next few months.
Thanks in advance.
Jake.

can you manually discover the new instances on the new server?
Then just make sure the name that appears in Grid Control is different.
e.g. prod.world is on server A and B. When you discover in Grid control, you can make it prod_B and you will see the latter without any problem.

Can I create a database with the same name and DBID that one is dropped?

Hello,
I need to restore a backup database, made with Oracle Enterprise Manager, in a new one, because the original is dropped. I've tried it with the recovery tools but fails, i suppose because the dbid's are not the same.
Then, Is it possible create a new database with the same old database dbid to restore de backup?
Thank you very much.
P.D.: I've too THE OLD spfile---.ora y el pwd---.ora

I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).

Can I get Two numbers for iMessage in the same Apple ID?

I have an iPhone and an iPad and I would like to be reached with different numbers. But when I log to my Apple ID, I just have one Number! In iPhone I have one number to voice call or face time and in my iPad I have another number for wifi+cell!

Creating a new iTunes account does not remove any purchases made on a different account.
If you want to create a new account : iTunes: How to set up an Apple ID within iTunes
Or if you will want to use it in the stores and don't want to give credit card details : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method
Or if you are not currently logged into an account in game centre then you should have a 'create a new Apple id' link at the bottom of the login screen in it.

Why is it so much for a new 8 gig touch and has only one camera lens-that is completely unfair, and a terrible tactic to play on people...

i dont understand why apple is charging so much more for the new ipod touch 5 , 8 gig with just one camera lens on it....its highway robbery...not only that every store that is close by to me are sold out of the 8 gig they also tried to rope me into the more exspensive ones...shame on you apple for doing this...it cost you pennies to make these items and you cant help the little guy out by making it more affordable for a struggling single mother of two try to make this year better...i am ashamed of you and that your products are going down hill since the passing of the master mind...i will no long be purchasing your products and will be trading the other products i have so i can give my children a good christmas...thanks....

sorry yes i ment 16g it still don't make any sence on why they choose to place a front camera on the 16g and not one on the back as well....NOT EVERYONE takes selfies... thank you for the comparision info...but apple is falling short, they charge way to much money for this item...thanks for the respond...

Generat two signals at the same time and reading voltage

Hii
i have try to generate two signals at the same time and read voltage from another port on the board(not have to be at the same time), i have not alot of expriens in labview
and i based my code of example(http://zone.ni.com/devzone/cda/epd/p/id/5197) from yours site and try to suit to my needs
now my problem is when i generat the 2 signals(that work perfect) i canot read voltage from another port on my CB-68LP
i can not find the problem and make it over i hope there is away to figer out and fix it.
i have two cards 6229, and two CB-68LP board.
labview 8.5.
my code is look like this - http://img142.imageshack.us/my.php?image=scrennshot2no2.png
(this works perfect).
and this is my code after suit to my need - http://img183.imageshack.us/my.php?image=scrennshotfl5.png,there is error exception at the right side.
the exception-
Possible reason(s):
Specified route cannot be satisfied, because it requires resources that are currently in use by another route.
Property: RefClk.Src
Source Device: Dev1
Source Terminal: 10MHzRefClock
Required Resources in Use by
Task Name: _unnamedTask<0>
Source Device: Dev1
Source Terminal: None
Destination Device: Dev1
Destination Terminal: RefClock
Task Name: _unnamedTask<1>
eyal

sorry...
The AO tasks is very important they will be synchronize ,it is very importent the two tasks will start at the same time
and after it run at synchronize mode i will need to make reading of voltage
i gust try to make simulation of machin (i give that machin AO and reading from it voltage that all)
first of all i make the two signals(synchronize signals).
and after it i will need to reading voltage.
i can make two signals synchronize together.
i can make reading voltage
but i can't make two signals synchronize together with reading voltage
it throw to me this error message.
i am looking for away to figer this out.
thank's for any help
eyal
Attachments:
test11.vi ‏130 KB

Plotting two continuous analog intpus on the same graph.

Hey,im currently using visual basic 6.0 and Measurement Stdio and want to read in two analog input signals at the same time and plot them on the same graph.Is there any sample code available to look at to carry this out?Or any help on how to go abouts this.
Cheers

Hi Dazza,
The link below takes you to a page which should provide you with what you need. Let me know if you need further help.
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E03B56A4E034080020E74861&p_node=DZ52130&p_source=External
Best regards,
Peter H.
Applications Engineer.
NIUK.

Lightroom, 5.5, Mac version: lens metadata incomplete and/or inconsistent. Photos taken with the same camera and lens display the lens metadata differently in LR 5.5, but are the same in the original files

LR is putting different descriptions of the same lens, used with the same camera, in the metadata of photos taken on the same occasion.
For example:
The following two images were taken with the same camera and lens.
They were imported at the same time into LR by copying.
The only difference in treatment is that the first was an untouched out-of camera jpeg, the second had been flipped using Preview on the Mac.
The one that was flipped has a full description of the lens, the one that was untouched has an abbreviated description.
When you show the file in the Finder and read the metadata using Preview, the correct full lens description appears.
Why is LR displaying the metadata differently for these two files?

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

Ordering two calendars for delivery at the same adress and paying only one

Similar Messages

Maybe you are looking for