Ordering using Unit-Of-Order

Hello All,
I was going through the oracle docs to understand how Unit Of Order works and came across this case study below:
The sequence is
Joe clicks the order button from his shopping cart.
The order message (message A) is placed on Queue1
Joe cancels the order
My question is since the order message is still on Queue1 and is not in the database yet; there is no order to cancel. So, in step 3 Joe cancels which order?
I hope to get some clarification about the unit of order from the experts in the group.
Thanks
Purnima
Workflow for Joe’s Order Using Unit-of-Order
Joe clicks the order button from his shopping cart.
The order message (message A) is placed on Queue1.
Joe cancels the order.
The cancel order (message B) is placed on Queue1.
MdbX takes message A from Queue1.
MdbY takes message B from Queue1.
Message B on MdbY is blocked until MdbX acknowledges the order message. See What Happens When a Message Is Delayed During Processing?.
Message A is committed and written to the database.
Message B is committed and written to the database.
Because there is a corresponding order message, Joe’s order is removed from the database and he does not receive a book.

use xa connection factory

Similar Messages

ME22N Show Numerator for Conversion of Order Price Unit into Order Unit

I hide Price in Me22n, when we do this, system hide the "Numerator for Conversion of Order Price Unit into Order Unit", but i want show this field on screen.
This field is : in Me22n -> view "Quantites/Weights "->"Order Unit <-> Ord. Price Unit".
How do i for this?

Hi Paul,
The field for Denominator for Conv. of Order Price Unit into Order Unit is MEPO1311-BPUMN and for Numerator it is MEPO1311-BPUMZ. Try hiding only the Denominator field using Loop at Screen. <CODE> ENDLOOP and see.
Hope that it helps. Reward if useful.
Thanks and Regards,
Maddineni Bharath.

Requistion and Purchase Order - base unit and order unit

People,
I have a basic doubt in MM:
I have a Requisition with a item using the base unit, for instance 20 litres.
When I create a Purchase Order in ME21N passing the requisition and item number, I must be converted to the order unit, correct?
In this case, we have 1 UN (order unit) corresponds to 20Liters (base unit).
I did believe the Purchase would be converted to 1 UN, but I got 20 Liters.
What is correct?
Thanks a lot!

If you maintian the order unit in the mateiral master purchaisng screen than whenever you create the PO system will convenrt in to that order unit and in the Po item details you will see the conversion of base unit to order unit.
now suppose you have more than one order unit than you activate the Variable order unit in the material master and maintiqan the conversion of that and create the diff info record for diff order unit based on the vendor so whne oyu create the PO as per the vendor system will pull the order unit in the PO.
Hope this will give you clear picture.

How to Create a Return Order wrt a Standard Order using Inbound IDOC Orders

HI,
We have a scenario :
Standard Order - is exiting in System with 2 line items :
Item 10
Qty 20
Item 20
Qty 30
Is it possible create a Return Order With Reference to this standard order for Line Item 20 only using inbound IDOC Orders?
If yes what should be the mapping in the IDOC about the Standard Order, Item and QTY ?
Regards
Anurag

hi,
try using this bapi.
/AFS/BAPI_SALESORD_CREATEFDATA.
thanks,
satish

Changing report order using the break order property

I am trying to allow the user to pick the order of the report's data. This has lead me to ask the following questions:
How can the break order property of a Database Column be set at runtime, specifically in the Before Report program unit??? (changing the order BY clause in the SQL query will not be sufficient because report builder enforces that at least one column�s break order in each Group, other than the lowest one, must be set at design time)
How can the order of the Database Columns in a Group be re-arranged at runtime, specifically in the Before Report program unit???
Thanks for any help that you can provide.

Hi Kevin,
I don't think that the "Break Order" property can be set programmatically, so it may not be possible to expose it to the users. I think it can only be an enhancement request to the product.
Navneet.

Scalability of Unit of Order

1. We are considering using Unit Of Order (UOO) in an Active-Active weblogic cluster.
What are the vertical and horizontal scalability options of UOO in such a case?
2. To ensure strict sequencing requirements of messages, could we consider using a w s reliable messaging session as an alternative to UOO?
Thanks,
B.

Hi,
I read the document, Michal, chapter 3.1.3 about load balancing is quite helpfull. Thank's.
As I understand it right for scaling up the adapter engine (java stack) I would need a web dispatcher but for scaling up the integration engine (ABAP stack) this would do the message server. Right?
As I understand it, Jaime, most of the performance/memory is needed for the mapping in general? That's why normal mappings don't use XSLT?
Kind regards,
Horst
PS: The quicksizer did not work for me (with firefox)

FM SD_SALESDOCUMENT_CREATE on creating a sales order using reference

I create a sales order using a reference order number.On displaying it in VA02, and giving document flow, the reference document which I used to create the sales order gets displayed.
A program/fm u2018Xu2019 is called on giving document flow (which takes the reference order number I used as input )
Now if that u2018Xu2019 is getting the data of the reference order I used from some table u201CT_Yu201D.This table u201CT_Yu201D must be set during sales order creation itself. So, some program which is called during creation of sales order gets the reference order number I used as input and puts it in that table u201CT_Yu201D.
My assumption is that SD_SALESDOCUMENT_CREATE is the function module handling that part. If it is not for that, then what is its function.
*****If it is handling that part, which structure which this FM gets as input contains that order number which I used as reference?
There are 3 bapiu2019s called on sales order creation, BAPI_SALESORDER_CREATEFROMDAT2, BAPI_SALESORDER_CREATEFROMDAT1, BAPI_SALESORDER_CREATEFROMDATA.
Only one BAPI calls SD_SALESDOCUMENT_CREATE namely BAPI_SALESORDER_CREATEFROMDAT2
*****Why does the FM SD_SALESDOCUMENT_CREATE not get triggered when I set a breakpoint in it during sales order creation?

Please search in SDN so many thread related to create sales order

Create a purchase order using transaction ME21

Hello Abappers,
I want to create a STO( purchase order using the sales order data) using transcation ME21.
Kindly provide step wise details as i am a technical person adn dont have to functional knowledge to create it.Also mention where the pricing conditions, the delivery address of the receiving plant. etc will have to be mentioned.
Thanks a lot in advance.
Appropriate points wil be rewarded to.

check this link::
http://web.mit.edu/sapr3/windocs/bpors03m.htm
from Purchase Requisition
http://web.mit.edu/sapr3/windocs/bpors03n.htm

In PR only base uom can be used - Why not order unit ?

Hi All,
When I create PR for raw material, SAP by default takes the base UOM. But our stack holders wants to use Order unit in the PR.
What is the setting required to use order unit in PR.
If this can't be done - what is the note number to support this standpoint from SAP.
Please reply.
Regards,
Raj.

Hi Rahul,
Base unit : KG
Order Unit: Meter
Currently all the raw materials planning is done outside SAP. Hence the planners raise raw material PR to procurement dept for processing.
Typical PR will have anything from 10 to 25 rawmaterial numbers in it.
Then again they manually cenvert the required order unit to base unit for PR purpose.
Thanks,
Raj.

Using weblogic unit-of-order (UOO) in osb proxy service

Hi,
I have a JMS Queue deployed to Weblogic server. The messages inside the queue are grouped using the JMS_BEA_Unit-of-order (UOO) Weblogic feature.
Now i have a OSB 10g Proxy Service which reads messages from this Queue. The problem is, on recieving a message, acknowledgement is send immediately, thus removing the message from the Queue and next message with same Unit-Of-Order is ready for processing.
But the business scenario needs the first message to be read, processed and then decide to acknowledge or not. The second message should not be read unless the previous message is processed successfully.
Can anyone help with this scenario?
Thanks,
Alex
Edited by: user9024636 on Feb 11, 2010 2:57 AM

Hi Steve,
I don't know what you need UOO for, but, for some use cases, its sufficient just to configure a default UOO on the sender's connection factory.
Propapagation of a UOO from one desitnation to another is not automatic (except via SAF, or unless OSB somehow does it for you). Plain vanilla JMS apps do this by calling msg.getStringProperty("JMS_BEA_UnitOfOrder") on the received message and setUnitOfOrder() on the javax.jms.WLProducer.
You might find that there's more OSB expertise on an OSB newsgroup (I think it's one of the newsgroups under [url http://forums.oracle.com/forums/category.jspa?categoryID=194]SOA & Process Management).
Regards,
Tom

Steps For Goods Receipt For Work Order Using Handling Units

Hello MM gurus,
I'm new to HU Management. Can you please share with me the steps for executing a "Goods Receipt For Work Order" using Handling Units?
I created a HU (1000000026), and then using transaction COWBHUWE I tried using that HU to create a goods receipt, but I keep getting the message below:
Handling unit 1000000026 is not provided for goods receipt
Message no. VHURM046
Do you have to assign/plan HUs to Process Orders first? I think the problem is that I'm not understanding the process or the requirements for a goods receipt for work order using HU.

Hello Manish Kumar,
I've been doing Handling Units testing in our sandbox environment and I've been trying to Pack a Finished Product for a Process Order using
1-Transaction code HU02 to create the Handling Unit
2-Transaction COWBHUE after creating the HU to enter the production order number and the HU number and propose it, but the it doesn't work. When I propose it, nothing happens.
3.-I also tried COWBPACK, but for some reason, when I go into COWBPACK, key in the Process Order, and then press enter, I get the following message:
You do not have authorization to create handling units for plant BP08
Message no. VHUPD500
Do you know how to solve this issue?

Problem regarding the creation of sales order using bapi.

Hai all,
I am creating sales order using bapi but i am, get following error messages :
TYPE ID NUMBER MESSAGE
E       VP   112       Please enter sold-to party or ship-to party
E       V4   219       Sales document was not changed
I have entered all the parameters.
my program is as follows :
*& Report ZSD_SALES_ORDER
REPORT ZSD_SALES_ORDER.
    Tables
*table definitions
TABLES:vbak,      "Sales Document: Header Data
        knvv,     "Customer Master Sales Data
        mara,     "General Material Data
        t001l,    "Plants/Branches
        mvke,     "Sales Data for Material
        vbap,     "Sales Document: Item Data
        konv.     "Conditions (Transaction Data)
    Types
*type for upload data
TYPES :BEGIN OF ty_upload,
       matnr(20) TYPE c,                  " Old material number
       quantity(20) TYPE c,               " Cumulative order quantity in sales units
VALUE TYPE       BAPIKWERT1,
      value(20) TYPE c,                  " Condition value
             value TYPE konv-kwert,                  " Condition value
END OF ty_upload.
*type for final output table
TYPES :BEGIN OF ty_main,
           bismt TYPE mara-bismt,    "Old material number
           matnr TYPE vbap-matnr,    "Material Number
           kunnr TYPE vbak-kunnr,    "customer number
           auart TYPE vbak-auart,    "Sales Document Type
           vkorg TYPE vbak-vkorg,    "Sales Organization
           vtweg TYPE vbak-vtweg,    "Distribution Channel
           spart TYPE vbak-spart,    "Division
           vbeln TYPE vbak-vbeln,    "Sales document
           werks TYPE marc-werks,    " Plant
           lgort TYPE mard-lgort,    "Storage Location
           posnr TYPE vbap-posnr,    "Sales Document Item
           parvw TYPE vbpa-parvw,    "Partner function
           kwmeng TYPE vbap-kwmeng,   "Cumulative order quantity in sales units
           kschl TYPE konv-kschl,    "Condition type
          kwert TYPE konv-kwert,    "Condition value
KWERT TYPE       BAPIKWERT1,
          kwert(20) TYPE c,    "Condition value
           waers TYPE konv-waers,    "Currency
     END OF ty_main.
*type for old material number
TYPES: BEGIN OF ty_matnr,
       matnr TYPE mara-matnr,
       bismt TYPE mara-bismt,
       END OF ty_matnr.
*type for order number
TYPES :BEGIN OF ty_output,
       vbeln TYPE vbak-vbeln,       "Sales Document
     END OF ty_output.
    Constants                Begin with C_                           *
CONSTANTS:
c_zpmu(4) TYPE c VALUE 'ZPMU',
c_zpmm(4) TYPE c VALUE 'ZPMM'.
DATA: c_ch(1) TYPE c VALUE 'X'.
    Data                     Begin with W_                           *
*global data for validations
DATA: w_count TYPE i,
      w_vkorg TYPE vbak-vkorg,
      w_vtweg TYPE vbak-vtweg,
      w_spart TYPE vbak-spart,
      w_werks TYPE t001l-werks,
      w_check TYPE c,
      w_itemno TYPE posnr_va,
     W_COND TYPE C.
      w_cond(3) TYPE c.
    Internal tables          Begin with IT_                          *
*internal table definitions
DATA : it_upload TYPE STANDARD TABLE OF ty_upload ,
       wa_upload TYPE ty_upload.
DATA : it_main TYPE STANDARD TABLE OF ty_main,
       wa_main TYPE ty_main.
DATA: it_matnr TYPE STANDARD TABLE OF ty_matnr,
      wa_matnr TYPE ty_matnr.
DATA : it_output TYPE STANDARD TABLE OF ty_output.
Internal table for BAPI.
DATA: it_bapisdhd1 TYPE STANDARD TABLE OF bapisdhd1,        "Sales and Distribution Document Header
      wa_bapisdhd1 TYPE bapisdhd1.
DATA: it_bapisditm TYPE STANDARD TABLE OF bapisditm ,       "Sales and Distribution Document Item
      wa_bapisditm TYPE bapisditm.
DATA: it_bapiparnr TYPE STANDARD TABLE OF bapiparnr,        "SD Document Partner: WWW
      wa_bapiparnr TYPE bapiparnr.
DATA: it_bapischdl TYPE STANDARD TABLE OF bapischdl,       "Schedule Lines
      wa_bapischdl TYPE bapischdl.
DATA: it_bapicond TYPE STANDARD TABLE OF bapicond,       "Communication Fields for Maintaining Conditions in the Order
      wa_bapicond TYPE bapicond.
DATA: it_bapiret2 TYPE STANDARD TABLE OF bapiret2,        "Return Parameter
      wa_bapiret2 TYPE bapiret2.
      Parameters              Begin with PR_                        *
*selection screen definition
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME .
PARAMETERS: pr_vkorg TYPE vbak-vkorg OBLIGATORY,
            pr_vtweg TYPE vbak-vtweg OBLIGATORY,
            pr_spart TYPE vbak-spart OBLIGATORY,
            pr_kunnr TYPE kna1-kunnr OBLIGATORY,
            pr_werks TYPE marc-werks OBLIGATORY,
            pr_lgort TYPE mard-lgort OBLIGATORY.
PARAMETERS: pr_auart TYPE vbak-auart OBLIGATORY,
           PR_AUGRU TYPE VBAK-AUGRU OBLIGATORY.
                        pr_augru TYPE vbak-augru.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME.
PARAMETERS : pr_file TYPE ibipparms-path OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk2.
      At selection-screen                                           *
AT SELECTION-SCREEN.
PERFORM f006_validate_vkorg.
PERFORM f007_validate_vtweg.
PERFORM f008_validate_spart.
PERFORM f009_validate_kunnr.
PERFORM f010_validate_werks.
PERFORM f011_validate_lgort.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pr_file.
*for f4 help----
PERFORM f003_f4_help.
      S T A R T   O F   S E L E C T I O N                           *
START-OF-SELECTION.
*for material ,quantity and value upload
PERFORM f001_upload_file.
*get data
PERFORM f003_get_data.
*for check the data
PERFORM f002_check_data .
PERFORM f004_process.
*for posting
PERFORM f005_posting.
END-OF-SELECTION.
      E N D       O F   S E L E C T I O N                           *
*&      Form f001_upload_file
      upload file
FORM f001_upload_file .
DATA : lw_fname TYPE string.
CLEAR lw_fname.
lw_fname = pr_file.
REFRESH it_upload.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = lw_fname
      filetype                = 'ASC'
      has_field_separator     = c_ch
    TABLES
      data_tab                = it_upload
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_upload INTO wa_upload.
   wa_upload-value = ( wa_upload-value ) / 10.
   MODIFY it_upload FROM wa_upload.
ENDLOOP.
ENDFORM.                    "F001_UPLOAD_FILE
*&      Form f003_f4_help
      f4 help
FORM f003_f4_help .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = ' '
    IMPORTING
      file_name     = pr_file.
ENDFORM.                    " f003_f4_help
*&      Form check_data
      text
FORM f002_check_data .
DATA: lw_lines TYPE i.
DESCRIBE TABLE it_main LINES lw_lines.
IF lw_lines LE 0.
    RETURN.
ENDIF.
SELECT a~matnr
         a~bismt FROM mara AS a INNER JOIN mvke AS b
               ON amatnr = bmatnr
               INTO CORRESPONDING FIELDS OF TABLE it_matnr
               FOR ALL ENTRIES IN it_main
               WHERE a~bismt = it_main-bismt.
IF sy-subrc = 0.
    LOOP AT it_main INTO wa_main.
      CLEAR : wa_matnr.
      READ TABLE it_matnr INTO wa_matnr WITH KEY bismt = wa_main-bismt.
      IF sy-subrc = 0.
        MOVE: wa_matnr-matnr TO wa_main-matnr.
      ENDIF.
      MODIFY it_main FROM wa_main TRANSPORTING matnr WHERE bismt = wa_main-bismt.
    ENDLOOP.
ELSE.
   MESSAGE e000(zmsd) WITH text-001.
ENDIF.
ENDFORM.                    "CHECK_DATA
*&      Form F009_validate_vkorg
      text
FORM f006_validate_vkorg .
CLEAR w_vkorg.
SELECT SINGLE vkorg
      INTO w_vkorg FROM tvko
      WHERE vkorg EQ pr_vkorg.
IF sy-subrc <> 0.
    MESSAGE e000(zmsd) WITH text-012 pr_vkorg.
ENDIF.
ENDFORM.                    " F009_validate_vkorg
*&      Form f007_validate_vtweg
      text
FORM f007_validate_vtweg .
CLEAR:w_vtweg.
SELECT SINGLE vtweg
       INTO w_vtweg FROM tvtw
       WHERE vtweg EQ pr_vtweg.
IF sy-subrc <> 0.
    MESSAGE e089(zmsd).
ENDIF.
ENDFORM.                    " f007_validate_vtweg
*&      Form f008_validate_spart
      text
FORM f008_validate_spart .
CLEAR:w_spart.
SELECT SINGLE spart
        INTO w_spart FROM tspa
        WHERE spart EQ pr_spart.
IF sy-subrc <> 0.
    MESSAGE e087(zmsd).
ENDIF.
ENDFORM.                    " f008_validate_spart
*&      Form F010_validate_kunnr
      text
FORM f009_validate_kunnr .
DATA: l_kunnr TYPE kunnr.
CLEAR: w_vkorg, w_vtweg,w_spart.
SELECT SINGLE kunnr FROM knvv
         INTO l_kunnr
         WHERE kunnr = pr_kunnr
         AND    vkorg = pr_vkorg
         AND    vtweg = pr_vtweg
         AND    spart = pr_spart.
IF sy-subrc <> 0.
   MESSAGE e000(zmsd) WITH text-010 pr_kunnr text-011 pr_vkorg .
ENDIF.
ENDFORM.                    " F010_validate_kunnr
*&      Form f010_validate_werks
      text
FORM f010_validate_werks .
CLEAR:w_werks.
SELECT SINGLE werks
        INTO w_werks FROM t001w
        WHERE werks EQ pr_werks.
IF sy-subrc <> 0.
    MESSAGE e088(zmsd).
ENDIF.
ENDFORM.                    " f010_validate_werks
*&      Form F011_validate_lgort
      text
FORM f011_validate_lgort .
CLEAR:w_werks .
SELECT   SINGLE werks FROM t001l
         INTO w_werks
         WHERE werks = pr_werks
         AND    lgort = pr_lgort.
IF sy-subrc <> 0.
    MESSAGE e000(zmsd) WITH text-007 pr_lgort text-008 pr_werks .
ENDIF.
ENDFORM.                    " F011_validate_lgort
*&      Form f003_get_data
      text
FORM f003_get_data .
CLEAR wa_main.
REFRESH it_main.
LOOP AT it_upload INTO wa_upload.
    CLEAR : wa_main.
    MOVE: wa_upload-matnr     TO wa_main-bismt,
          wa_upload-quantity TO wa_main-kwmeng,
          wa_upload-value     TO wa_main-kwert,
          pr_vkorg            TO wa_main-vkorg,
          pr_vtweg            TO wa_main-vtweg,
          pr_spart            TO wa_main-spart,
          pr_kunnr            TO wa_main-kunnr,
          pr_werks            TO wa_main-werks,
          pr_lgort            TO wa_main-lgort.
    APPEND wa_main TO it_main.
ENDLOOP.
ENDFORM.                    " f003_get_data
*&      Form f004_process
      text
FORM f004_process .
CLEAR w_check.
LOOP AT it_main INTO wa_main.
   IF wa_main-matnr = ''.
     WRITE:/ text-006,
                 wa_main-bismt.
     w_check = 1.
   ENDIF.
   IF wa_main-kwmeng = 0.
     WRITE:/ text-005,
             wa_main-bismt.
     w_check = 1.
   ENDIF.
   IF    pr_auart <> 'ZM01'.
     IF wa_main-kwert IS INITIAL.
       WRITE:/ text-004,
                wa_main-bismt.
       w_check = 1.
     ENDIF.
   ENDIF.
ENDLOOP.
ENDFORM.                    " f004_process
*&      Form f005_posting
      text
FORM f005_posting .
CLEAR: w_itemno,
         w_cond.
w_itemno = 10.
w_cond = 1.
IF w_check = '' OR w_check = 1.
wa_bapisdhd1-doc_type = pr_auart.
wa_bapisdhd1-ord_reason = pr_augru.
LOOP AT it_main INTO wa_main.
    IF w_cond = 1.
      CLEAR: it_bapiret2,
             it_bapisditm,
             it_bapiparnr,
             it_bapischdl,
             it_bapicond.
      REFRESH:it_bapiret2,
              it_bapisditm,
              it_bapiparnr,
              it_bapischdl,
              it_bapicond.
      MOVE: wa_main-vkorg TO wa_bapisdhd1-sales_org,
            wa_main-vtweg TO wa_bapisdhd1-distr_chan,
            wa_main-spart TO wa_bapisdhd1-division.
      wa_bapisdhd1-wbs_eleM = 'Y561.1'.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
        EXPORTING
          INPUT         = pr_kunnr
       IMPORTING
         OUTPUT        = pr_kunnr.
      wa_bapisdhd1-PURCH_NO_S = pr_kunnr.
      wa_bapisdhd1-PURCH_NO_C = pr_kunnr.
    ENDIF.
    MOVE: w_itemno TO wa_bapisditm-itm_number,
           wa_main-matnr TO wa_bapisditm-material,
          wa_main-BISMT TO wa_bapisditm-material,
          wa_main-werks TO wa_bapisditm-plant,
          wa_main-lgort TO wa_bapisditm-store_loc.
                       wa_bapisditm-target_qty = '10'.
    wa_bapisditm-PURCH_NO_S = pr_kunnr.
    wa_bapisditm-PURCH_NO_C = pr_kunnr.
    APPEND wa_bapisditm TO it_bapisditm.
    IF w_cond = 1.
      wa_bapiparnr-partn_numb = pr_kunnr.
      wa_bapiparnr-itm_number = 10.
        wa_bapiparnr-partn_role = 'SP'.
      APPEND wa_bapiparnr TO it_bapiparnr.
      wa_bapiparnr-partn_role = 'AG'.
      APPEND wa_bapiparnr TO it_bapiparnr.
      CLEAR wa_bapiparnr-partn_role.
               wa_bapiparnr-partn_numb = pr_kunnr.
      wa_bapiparnr-partn_role = 'RE'.
      APPEND wa_bapiparnr TO it_bapiparnr.
      CLEAR wa_bapiparnr-partn_role.
               wa_bapiparnr-partn_numb = pr_kunnr.
      wa_bapiparnr-partn_role = 'RG'.
      APPEND wa_bapiparnr TO it_bapiparnr.
      CLEAR wa_bapiparnr-partn_role.
               wa_bapiparnr-partn_numb = pr_kunnr.
      wa_bapiparnr-partn_role = 'WE'.
      APPEND wa_bapiparnr TO it_bapiparnr.
    ENDIF.
    wa_bapischdl-itm_number = w_itemno.
    wa_bapischdl-req_qty    = wa_main-kwmeng.
     wa_bapischdl-PURCH_NO_S = pr_kunnr.
    APPEND wa_bapischdl TO it_bapischdl.
    wa_bapicond-itm_number = w_itemno.
    wa_bapicond-cond_type = 'ZECL'.
     IF    ( wa_bapisdhd1-doc_type = 'ZPMU' ) OR ( wa_bapisdhd1-doc_type = 'ZPMM' ).
       wa_bapicond-cond_type = 'ZVAL'.
     ELSE.
       wa_bapicond-cond_type = 'ZMRP'.       "+PK12122006
     ENDIF.
    wa_bapicond-cond_value = wa_main-kwert.
    APPEND wa_bapicond TO it_bapicond.
    w_itemno = w_itemno + 10.
    w_cond   = w_cond + 1.
ENDLOOP.
data : SALESDOCUMENTIN like BAPIVBELN-VBELN.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
    EXPORTING
      order_header_in     = wa_bapisdhd1
    IMPORTING
      salesdocument       = SALESDOCUMENTIN
    TABLES
      return              = it_bapiret2
      order_items_in      = it_bapisditm
      order_partners      = it_bapiparnr
      order_schedules_in = it_bapischdl
      order_conditions_in = it_bapicond.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = c_ch.
ENDIF.
LOOP AT it_bapiret2 INTO wa_bapiret2.
    DATA : w_err(100) TYPE c,
    w_matnr TYPE matnr.
    IF wa_bapiret2-type = 'E' AND wa_bapiret2-id = 'V1' AND wa_bapiret2-number = 392.
      UNPACK wa_bapiret2-message_v1 TO w_matnr.
      READ TABLE it_matnr INTO wa_matnr WITH KEY matnr = w_matnr.
      IF sy-subrc EQ 0.
        CONCATENATE text-013 wa_matnr-bismt INTO w_err SEPARATED BY space.
        MESSAGE w_err TYPE 'S'.
      ENDIF.
    ENDIF.
    IF WA_BAPIRET2-TYPE = 'S'. " Comment
      WRITE: 40 TEXT-009, WA_BAPIRET2-MESSAGE_V2+0(10).
    ENDIF.
ENDLOOP.
ENDFORM.                    " f005_posting
I have given all the necessary parameters. it is telling that error is in parameter
sales_header_in.
I have checked it.
i have assigned purch_no_s and purch_no_c of the structure BAPISDHD1(ORDER_HEADER_IN)
in the bapi with customer number.
and also i have assigned the partnumber of the structure BAPIPARNR ORDER_PARTNERS
in the bapi with customer number.
but still , it is diplaying the error message, please enter the sold to or ship to party number.
how to resolve this error.
this is urgent requirement.
points will be awarded.
thanking u in advance,
a.srinivas.

Hi,
Did u have a look at the standard programs which make use of BAPI_SALESORDER_CREATEFROMDAT1
Heres a list...
LWSSOU08
MV45WF0S
MWWMJF21_BAPI_SALESORDER_CREAT
RBUS2032
Regards,
Tanveer.
<b>Please mark helpful answers</b>

Not able to create sales order using BAPI - BAPI_SALESORDER_CREATEFROMDAT2

Hi Experts,
I am not able to create sales order . I am using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
to create sales order .I am passing external sales order number to the parameter
SALESDOCUMENTIN.
I am getting following error.
"524   |Only quantity 1 EA is allowed (Item 00001"
Here EA is UOM(Unit of measurement).
Below is the sample program through which i am trying to create the sales order.
*& Report ZSDC_SALES_TEST
report zsdc_sales_test.
*DATA: wa_bapi_header    TYPE bapisdhd1.
Include Name    - ZSDC_SALES_ORD_UPLOAD_TOP
Program Name    - ZSDC_SALES_ORD_UPLOAD_1393
Program Title   - Include for Data Declaration and selection screen
Created by      - Lalitha W
Created on      - 18-Nov-2008
Object ID       - SD_C_1393_SALES_ORDER_UPLOAD
Request Id      - SD3K905579
Description - This is a common INCLUDE for data declarations and
*selection screen details.
                        HISTORY
Date    |Developer |Req by    | Description              |Reference ID
        |          |          |                          |
        |          |          |                          |
                           TYPE-POOLS
*TYPE-POOLS: truxs, abap, slis.
                          TABLES
*TABLES: t100.
                           TYPES
types:begin of   ty_header,
        auart(4)    type c,    " Sales Order Type
        vkorg(4)    type c,    " Sales Organization
        vtweg(2)    type c,    " Distrubution Channel
        spart(2)    type c,    " Division
        kunnr_1(10) type c,    " Sold to Party
        kunnr_2(10) type c,    " Ship to Party
        augru(3)    type c,    " Order Reason
        bstkd(35)   type c,    " PO Number
        bstdk(10)   type c,    " PO Date
        ketdat(10) type c,    " Required Delivery Date
        zterm(4)    type c,    " Payment Terms
        inco1(3)    type c,    " Inco Terms -1
        inco2(28)   type c,    " Inco Terms -2
        prsdt(10)   type c,    " pricing date
        waerk(5)    type c,    " Document Currency
        vkbur(4)    type c,    " Sales Office
        vkgrp(3)    type c,    " Sales group
        pltyp(2)    type c,    " Price List type
        kdgrp(2)    type c,    " Customer Group
        bstkd_e(35) type c,    " Ship-to-party PO number
        submi(10)   type c,    " Collective Number
        bname(35)   type c,    " Name
        ihrez(12)   type c,    " Your Reference
        kschl_1(4)   type c,    " Condition Type
        kbetr_1(11) type c,    " Amount
        kschl_2(4)   type c,    " Condition Type
        kbetr_2(11) type c,    " Amount
        kschl_3(4)   type c,    " Condition Type
        kbetr_3(11) type c,    " Amount
       partner_1(25) TYPE c,    " Partner(Bill To Party Number)
       partner_2(25) TYPE c,    " Partner(Payer Number)
       partner_3(25) TYPE c,    " Partner(Sales Responsible Number)
       partner_4(25) TYPE c,    " Partner(Order admin)
       partner_5(25) TYPE c,    " Partner(Contact person)
        partner_1(10) type c,    " Partner(Bill To Party Number)
        partner_2(10) type c,    " Partner(Payer Number)
        partner_3(10) type c,    " Partner(Sales Responsible Number)
        partner_4(10) type c,    " Partner(Order admin)
        partner_5(10) type c,    " Partner(Contact person)
        tdspras_1(2) type c,
        text_1(500)   type c,    " Text Before Items Z012
        tdspras_2(2) type c,
        text_2(500)   type c,    " Invocie Up Z034
        tdspras_3(2) type c,
        text_3(500)   type c,    " Invocie Down Z035
        tdspras_4(2) type c,
        text_4(500)   type c,    " Customer Reference Continue Z018
        tdspras_5(2) type c,
        text_5(500)   type c,    " Dispatch Marks/ Order Z019
        tdspras_6(2) type c,
        text_6(500)   type c,    " Ordered By Z003
        tdspras_7(2) type c,
        text_7(500)   type c,    " Sales Parameters Z002
        kvgr1(3)      type c,    " Industry
        kvgr2(3)      type c,    " customer BU
end of ty_header.
types: begin of ty_item,
          bstkd(35)     type c,    " PO Number
          bstdk(10)     type c,    " PO Date
          bstkd_e(35)   type c,    " Ship-to-party PO number
          posnr(6)      type c,    " POSTION NUMBER
          matnr(18)     type c,    " Material Number
          kwmeng(18)    type c,    " Order Quantity
          pstyv(4)      type c,    " Sales doc. item categ
          kursk(18)     type c,    " EXCHANGE RATE****
          ffprf(8)      type c,    " DIP PROFILE
          werks(4)      type c,    " Delivering Plant
          vstel(4)      type c,    " SHIPPING POINT
          lgort(4)      type c,    " STORAGE LOCATION
          route(6)      type c,    " Route
          kurrf(18)     type c,    " EXCHANGE RATE-FI
          ntgew(18)     type c,    " Net Weight
          brgew(18)     type c,    " Gross Weight
          gewei(3)      type c,    " Weight Unit
          prctr(10)     type c,    " profit center
          abgrs(6)      type c,    " RESULT ANALYSIS KEY
          kalsm_k(4)    type c,    " COSTING SHEET
          kschl_1(4)    type c,    " Condition Type
          kbetr_1(11)   type c,    " Amount
          kschl_2(4)    type c,    " Condition Type
          kbetr_2(11)   type c,    " Amount
          kschl_3(4)    type c,    " Condition Type
          kbetr_3(11)   type c,    " Amount
          text_1(500)    type c,    " material Text 0001
          tdspras_1(1)   type c,
          text_2(500)    type c,    " Pr Text 9001
          tdspras_2(1)   type c,
       end of ty_item.
types: begin of ty_schedule_line,
         bstkd(35)       type c, "PO number
         bstdk(10)       type c, "PO date
         bstkd_e(35)     type c, "Ship-to-party PO number
         posnr(6)        type c, "sales doc.Item
         etdat(10)       type c, "Schedule line date
         wmeng(2)        type c, "Order Quantity
        end of ty_schedule_line.
types: begin of ty_err ,
        auart(4)    type c,    " Sales Order Type
        vkorg(4)    type c,    " Sales Organization
        vtweg(2)    type c,    " Distrubution Channel
        spart(2)    type c,    " Division
        kunnr_1(10) type c,    " Sold to Party
        kunnr_2(10) type c,    " Ship to Party
        augru(3)    type c,    " Order Reason
        bstkd(35)   type c,    " PO Number
        bstdk(10)   type c,    " PO Date
        ketdat(10) type c,    " Required Delivery Date
        zterm(4)    type c,    " Payment Terms
        inco1(3)    type c,    " Inco Terms -1
        inco2(28)   type c,    " Inco Terms -2
        prsdt(10)   type c,    " pricing date
        waerk(5)    type c,    " Document Currency
        vkbur(2)    type c,    " Sales Office
        vkgrp(3)    type c,    " Sales group
        pltyp(2)    type c,    " Price List type
        kdgrp(2)    type c,    " Customer Group
        bstkd_e(35) type c,    " Ship-to-party PO number
        submi(10)   type c,    " Collective Number
        bname(35)   type c,    " Name
        ihrez(12)   type c,    " Your Reference
        kschl_1(4)   type c,    " Condition Type
        kbetr_1(11) type c,    " Amount
        kschl_2(4)   type c,    " Condition Type
        kbetr_2(11) type c,    " Amount
        kschl_3(4)   type c,    " Condition Type
        kbetr_3(11) type c,    " Amount
        partner_1(25) type c,    " Partner(Bill To Party Number)
        partner_2(25) type c,    " Partner(Payer Number)
        partner_3(25) type c,    " Partner(Sales Responsible Number)
        partner_4(25) type c,    " Partner(Order admin)
        partner_5(25) type c,    " Partner(Contact person)
        tdspras_1(2) type c,
        text_1(500)   type c,    " Text Before Items Z012
        tdspras_2(2) type c,
        text_2(500)   type c,    " Invocie Up Z034
        tdspras_3(2) type c,
        text_3(500)   type c,    " Invocie Down Z035
        tdspras_4(2) type c,
        text_4(500)   type c,    " Customer Reference Continue Z018
        tdspras_5(2) type c,
        text_5(500)   type c,    " Dispatch Marks/ Order Z019
        tdspras_6(2) type c,
        text_6(500)   type c,    " Ordered By Z003
        tdspras_7(2) type c,
        text_7(500)   type c,    " Sales Parameters Z002
        kvgr1(3)      type c,    " Industry
        kvgr2(3)      type c,    " customer BU
        message(600) type c,
end of ty_err.
types: begin of ty_t685a,
        kschl type kschl,
        krech type krech,
      end of ty_t685a.
                   INTERNAL TABLES
***header
data: g_krech_1(4)    type c,    " Calculation type for condition
       g_krech_2(4)    type c,    " Calculation type for condition
       g_krech_3(4)    type c.    " Calculation type for condition
      g_krech_4(4)    TYPE c,    " Calculation type for condition
      g_krech_5(4)    TYPE c,    " Calculation type for condition
      g_krech_6(4)    TYPE c,    " Calculation type for condition
      g_krech_7(4)    TYPE c,    " Calculation type for condition
      g_krech_8(4)    TYPE c,    " Calculation type for condition
      g_krech_9(4)    TYPE c,    " Calculation type for condition
      g_krech_10(4)   TYPE c,    " Calculation type for condition
      g_krech_11(4)   TYPE c,    " Calculation type for condition
      g_krech_12(4)   TYPE c,    " Calculation type for condition
      g_krech_13(4)   TYPE c,    " Calculation type for condition
      g_krech_14(4)   TYPE c,    " Calculation type for condition
      g_krech_15(4)   TYPE c,    " Calculation type for condition
      g_krech_16(4)   TYPE c,    " Calculation type for condition
      g_krech_17(4)   TYPE c,    " Calculation type for condition
      g_krech_18(4)   TYPE c,    " Calculation type for condition
      g_krech_19(4)   TYPE c,    " Calculation type for condition
      g_krech_20(4)   TYPE c.    " Calculation type for condition
Items
data:   g_krech_item_1(4)   type c,    " Calculation type for condition
        g_krech_item_2(4)   type c,    " Calculation type for condition
        g_krech_item_3(4)   type c.    " Calculation type for condition
       g_krech_item_4(4)   TYPE c,    " Calculation type for condition
       g_krech_item_5(4)   TYPE c,    " Calculation type for condition
       g_krech_item_6(4)   TYPE c,    " Calculation type for condition
       g_krech_item_7(4)   TYPE c,    " Calculation type for condition
       g_krech_item_8(4)   TYPE c,    " Calculation type for condition
       g_krech_item_9(4)   TYPE c,    " Calculation type for condition
       g_krech_item_10(4) TYPE c,    " Calculation type for condition
       g_krech_item_11(4) TYPE c,    " Calculation type for condition
       g_krech_item_12(4) TYPE c,    " Calculation type for condition
       g_krech_item_13(4) TYPE c,    " Calculation type for condition
       g_krech_item_14(4) TYPE c,    " Calculation type for condition
       g_krech_item_15(4) TYPE c,    " Calculation type for condition
       g_krech_item_16(4) TYPE c.    " Calculation type for condition
data: it_t685a type standard table of ty_t685a.
data: wa_bapi_header    type bapisdhd1,
     wa_bapi_headerx   TYPE bapisdhd1x,
      it_bapi_item      type table of bapisditm,
     it_bapi_itemx     TYPE TABLE OF bapisditmx,
      it_bapi_cond      type table of bapicond,
     it_bapi_condx     TYPE TABLE OF bapicondx,
      it_bapi_partner   type table of bapiparnr,
      it_bapi_shdl      type table of bapischdl,
     it_bapi_shdlx     TYPE TABLE OF bapischdlx,
     it_bapi_order_text type TABLE OF BAPISDTEXT,
      it_bapireturn     type table of bapiret2.
data: wa_bapi_item       like line of it_bapi_item,
      wa_bapi_itemx      LIKE LINE OF it_bapi_itemx,
       wa_bapi_cond       like line of it_bapi_cond,
      wa_bapi_condx      LIKE LINE OF it_bapi_condx,
       wa_bapi_partner    like line of it_bapi_partner,
       wa_bapi_shdl       like line of it_bapi_shdl,
      wa_bapi_shdlx      LIKE LINE OF it_bapi_shdlx,
      wa_bapi_order_text like LINE OF it_bapi_order_text,
       wa_bapireturn      like line of it_bapireturn.
*DATA: zmode(1) VALUE 'N'.
data: it_header      type standard table of ty_header.
*DATA: it_temp_header TYPE STANDARD TABLE OF ty_header.
data: it_item        type standard table of ty_item.
*DATA: it_temp_item   TYPE STANDARD TABLE OF ty_item.
data: it_err         type standard table of ty_err.
data: it_fline1 type standard table of tline,
      wa_fline1 type tline.
data: it_thead1 type thead.
data: it_fline2 type standard table of tline,
      wa_fline2 type tline.
data: it_thead2 type thead.
data: it_fline3 type standard table of tline,
      wa_fline3 type tline.
data: it_thead3 type thead.
data: it_fline4 type standard table of tline,
      wa_fline4 type tline.
data: it_thead4 type thead.
data: it_fline5 type standard table of tline,
      wa_fline5 type tline.
data: it_thead5 type thead.
data: wa_header         like line of it_header,
      wa_item           like line of it_item,
      wa_err            type ty_err,
     wa_bill           LIKE LINE OF it_bill,
     wa_bill1          LIKE LINE OF it_bill,
      wa_iterr          like line of it_err,
      wa_t685a          like line of it_t685a.
     wa_bill_item TYPE ty_bill_item.
data: it_schedule_line type standard table of ty_schedule_line,
      wa_schedule_line type ty_schedule_line.
data: sales_order_no     type bapivbeln-vbeln.
data: ext_sales_order_no type bapivbeln-vbeln.
Variable to be used to separate the fields which are concatenated by a
runtime character
*DATA: g_tabchar(1) TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
*DATA: wa_truxs_t_text_data TYPE truxs_t_text_data.
*DATA: g_filename      TYPE string,
     g_path          TYPE string,
     g_fullpath      TYPE string,
     g_user_action   TYPE i,
     g_file_encoding TYPE abap_encoding.
*DATA : g_text(8192),
data : g_mstring1(100) type c,
      g_mstring2(100) type c,
      g_mstring3(100) type c,
      g_mstring4(100) type c,
      g_mstring5(100) type c.
data: g_count1 type ebelp,
      g_str_count1(6) type c.
data: g_count type ebelp,
      g_str_count(6) type c.
*DATA: f_subrc      LIKE sy-subrc,
     f_subrc1     LIKE sy-subrc,
     f_error(500) TYPE c,
     item1(27)    TYPE c,
     item2(27)    TYPE c,
     item3(27)    TYPE c,
     item4(27)    TYPE c,
     i            TYPE ekpo-ebelp.
*DATA: g_billplan_header TYPE c,
     g_billplan_item TYPE c.
data : g_external_so type vbak-vbeln. "SO
                      SELECTION-SCREEN
selection-screen begin of block frame1 with frame title text-001 .
parameters:p_file1 type rlgrap-filename, "OBLIGATORY, "Header data.
           p_file2 type rlgrap-filename, "OBLIGATORY, "Item Data.
           p_file3 type rlgrap-filename,            "Schedule line.
           p_file4 type rlgrap-filename ."OBLIGATORY. "Error file.
selection-screen end of block frame1.
start-of-selection.
wa_bapi_header-doc_type     = 'Z0MX'. "order type
wa_bapi_header-sales_org    = '0130'."sales org
wa_bapi_header-distr_chan   = '13'. "distr channel
wa_bapi_header-division     = '13'. "division
Old code from copied program
wa_bapi_header-purch_no_s   = wa_header-kunnr_2. " Ship to party
New code as required in Finland project
We are using to Header ->Order Tab -> Ship to Party -> Purchase order no (BSTKD_E) to store Old legacy SO number
wa_bapi_header-purch_no_s   = 'MX100443'. "External SO i.e Old legacey SO number
wa_bapi_header-ref_1_s      = '0000666666'. "Sold to party
wa_bapi_header-ord_reason   = wa_header-augru.
wa_bapi_header-purch_no_c   = 'ddr1234'.    " PO number
wa_bapi_header-purch_date   = sy-datum.    " PO date
wa_bapi_header-req_date_h   = sy-datum.   " Required Delivery Date
wa_bapi_header-pmnttrms     = '01'.    " Payment Terms
wa_bapi_header-incoterms1   = wa_header-inco1.
wa_bapi_header-incoterms2   = wa_header-inco2.
wa_bapi_header-price_date   = wa_header-prsdt.    " Pricing date
wa_bapi_header-currency     = wa_header-waerk.    " Document Currency
wa_bapi_header-sales_grp = wa_header-vkgrp. " Sales group
wa_bapi_header-price_list   = wa_header-pltyp. " Price list type
wa_bapi_header-cust_group   = wa_header-kdgrp.   " Cust Group
wa_bapi_header-ship_type    = wa_header-vsart.   " Shipping Type
wa_bapi_header-purch_no_s   = wa_header-bstkd_e. " Ship-to-party po number
wa_bapi_header-collect_no   = wa_header-submi.   " Collective No.
wa_bapi_header-name         = wa_header-bname.   " Name
wa_bapi_header-ref_1        = wa_header-ihrez.   " Your Reference
wa_bapi_header-cust_grp1    = wa_header-kvgr1.   " Industry
wa_bapi_header-cust_grp2    = wa_header-kvgr2.   " Customer BU
*ENDFORM.                    " f_header
IF wa_header-partner_1 IS NOT INITIAL.
    wa_bapi_partner-partn_role = 'AG'.
    wa_bapi_partner-partn_numb = '0000666666'.
    wa_bapi_partner-itm_number = '000000'.
    append wa_bapi_partner to it_bapi_partner.
    clear wa_bapi_partner.
ENDIF.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
    exporting
      input = wa_header-partner_2
    importing
      output = wa_header-partner_2.
IF wa_header-partner_2 IS NOT INITIAL.
    wa_bapi_partner-partn_role = 'WE'.
    wa_bapi_partner-partn_numb = '0000666666'.
    wa_bapi_partner-itm_number = '000000'.
    append wa_bapi_partner to it_bapi_partner.
    clear wa_bapi_partner.
ENDIF.
perform f_item.
data : order_items_inx type table of bapisditmx with header line.
order_items_inx-material          = 'X'. "
order_items_inx-target_qty        = 'X'. "
order_items_inx-comp_quant        = 'X'. "
order_items_inx-trgqty_den        = 'X'.
order_items_inx-rnddlv_qty        = 'X'.
order_items_inx-updateflag = 'I'.
order_items_inx-target_qu = 'X'.
order_items_inx-plant             = 'X'. "
append order_items_inx.
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
    exporting
      salesdocumentin = 'MX11111152'
order_header_in      = wa_bapi_header
         order_header_inx     = wa_bapi_headerx
importing
salesdocument        = sales_order_no
tables
return               = it_bapireturn
order_items_in       = it_bapi_item
order_items_inx      = order_items_inx
order_partners       = it_bapi_partner
   order_conditions_in = it_bapi_cond.
if sy-subrc is initial.
commit work.
endif.
*&      Form f_item
      text
form f_item .
call function 'CONVERSION_EXIT_ALPHA_INPUT'
    exporting
      input = wa_item-posnr
    importing
      output = wa_item-posnr.
wa_item-posnr = '000010'.
IF sy-subrc EQ 0. "IS INITIAL.
move wa_item-posnr to g_str_count."commented out by shakti
ENDIF.
wa_bapi_item-itm_number        = wa_item-posnr. " Line item
WA_BAPI_ITEM-PO_ITM_NO         = WA_ITEM-EBELP.
wa_bapi_item-division          = wa_item-spart.
wa_bapi_item-purch_no_c        = 'ddr1234'.   " po number
wa_bapi_item-purch_date        = sy-datum.   " po date
wa_bapi_item-purch_no_s        = 'MX11111112'. " Ship-to-party po number
wa_item-matnr = 'MAXIMO_SERVICE'.
call function 'CONVERSION_EXIT_MATN1_INPUT'
    exporting
      input        = wa_item-matnr
    importing
      output       = wa_item-matnr
    exceptions
      length_error = 1
      others       = 2.
if sy-subrc is initial.
    wa_bapi_item-material        = wa_item-matnr. "material
endif.
wa_bapi_item-target_qty        = '1'. " Order qty
wa_bapi_item-comp_quant = '1'.
wa_bapi_item-target_qu = 'EA'.
    wa_bapi_item-fixed_quan = '1'.
wa_bapi_item-comp_quant        = wa_item-kwmeng.
wa_bapi_item-trgqty_den        = '1'.
wa_bapi_item-rnddlv_qty        = wa_item-kwmeng.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
   EXPORTING
     input = wa_item-ps_psp_pnr
   IMPORTING
     output = wa_item-ps_psp_pnr.
IF sy-subrc = 0.
   wa_bapi_item-wbs_elem          = wa_item-ps_psp_pnr.
ENDIF.
wa_bapi_item-item_categ        = 'ZMAX'.
wa_bapi_item-ex_rate_fi        = wa_item-kurrf.
wa_bapi_item-dli_profil        = wa_item-ffprf.   " Dynamic item processor profile
wa_bapi_item-route             = wa_item-route.   " route
wa_bapi_item-exchg_rate        = wa_item-kursk.
wa_bapi_item-plant             = '2090'.   " Plant
wa_bapi_item-ship_point        = 'FN11'.   " Shipping point
wa_bapi_item-store_loc         = wa_item-lgort.   " stg loc
REPLACE ALL OCCURRENCES OF ',' IN wa_item-ntgew WITH '.'.
REPLACE ALL OCCURRENCES OF ',' IN wa_item-brgew WITH '.'.
wa_bapi_item-net_weight        = wa_item-ntgew. "
wa_bapi_item-gross_wght        = wa_item-brgew. "
call function 'CONVERSION_EXIT_CUNIT_INPUT'
    exporting
      input    = wa_item-gewei
      language = sy-langu
    importing
      output   = wa_item-gewei.
   EXCEPTIONS
     unit_not_found = 1
     OTHERS         = 2.
IF sy-subrc <> 0.
ENDIF.
wa_bapi_item-untof_wght        = 'KG'. " weight unit
replace all occurrences of ',' in wa_item-kursk with '.'.
replace all occurrences of ',' in wa_item-kurrf with '.'.
wa_bapi_item-profit_ctr        = wa_item-prctr.   " Profit center
wa_bapi_item-resanalkey        = wa_item-abgrs.   " RESULT ANALYSIS KEY
wa_bapi_item-cstg_sheet        = wa_item-kalsm_k. " COSTING SHEET
append wa_bapi_item to it_bapi_item.
endform.                    " f_item
Thanks & regards,
Chetan

see the following to create sales order:-
*& Report ZSALESORDER
*&DEVELOPED BY JANI KRUPA 4.10.2008
REPORT ZSALESORDER.
Parameters
Sales document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d .
SELECTION-SCREEN END OF LINE.
Complete Deliver
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text10 FOR FIELD p_autlf.
PARAMETERS: p_autlf TYPE autlf DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln            LIKE vbak-vbeln.
DATA: header             LIKE bapisdhead1.
DATA: headerx            LIKE bapisdhead1x.
DATA: item               LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner            LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                         WITH HEADER LINE.
DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                         WITH HEADER LINE.
DATA: lt_schedules_ink    TYPE STANDARD TABLE OF bapisdhead1
                         WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text   = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
v_text10 = 'Complete delivery'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
    header-COMPL_DLV = p_autlf.
    header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
       EXPORTING
            sales_header_in     = header
            sales_header_inx    = headerx
       IMPORTING
            salesdocument_ex    = v_vbeln
       TABLES
            return              = return
            sales_items_in      = item
            sales_items_inx     = itemx
            sales_schedules_in = lt_schedules_in
            sales_schedules_inx = lt_schedules_inx
            sales_partners      = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
    COMMIT WORK AND WAIT.
    WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.

Problem while creating sales order using BAPI

Hi all,
i am creating a sales order from the purchase order data.
when my client will send a PO in EDI format, my 3rd party edi tool will convert that edi formatted PO to text format. then i will upload that text formatted PO to my program then i will create a SO from those uploaded PO data using BAPI BAPI_SALESORDER_CREATEFROMDAT2.
but,no sales order is being created.& also i am not getting any return message.by debugging also, i am not getting the error.plz suggest where i am doing mistake.below is the coding.
DATA:
gfilename LIKE rlgrap-filename.
*--Internal tables
DATA: BEGIN OF i_item OCCURS 50.    "Create Material Document Item
        INCLUDE STRUCTURE BAPISDITM .
DATA: END OF i_item .
DATA: BEGIN OF i_partner OCCURS 20. "Return parameter
        INCLUDE STRUCTURE BAPIPARNR.
DATA: END OF i_partner.
DATA: BEGIN OF i_schedule OCCURS 20. "Return parameter
        INCLUDE STRUCTURE BAPISCHDL .
DATA: END OF i_schedule.
DATA: BEGIN OF i_cond OCCURS 20. "Return parameter
        INCLUDE STRUCTURE BAPICOND .
DATA: END OF i_cond.
DATA: BEGIN OF i_part OCCURS 0,     " Internal table for split data
        part(20),
      END OF i_part.
DATA: BEGIN OF i_return OCCURS 20. "Return parameter
        INCLUDE STRUCTURE bapiret2.
DATA: END OF i_return.
*-- Work areas
DATA: BEGIN OF wa_header .       "sales Document Header Data
        INCLUDE STRUCTURE BAPISDHD1.
DATA: END OF wa_header .
*DATA: BEGIN OF wa_return .       "Output Structure
       INCLUDE STRUCTURE BAPIRET2.
*DATA: END OF wa_return .
DATA: begin of sorder.
     INCLUDE STRUCTURE BAPIVBELN.
DATA: end of sorder.
data:begin of t_upload,
     ebeln(10), "PO no(seagate)
     aedat like sy-datum , "PO date
     bsart(4) , "PO type
     vdatu like sy-datum , "requested delivery date
     kunnr(10) , "customer no-sold-to-party
    kunak like vbak-kunnr, "bill-to-party
     name1_s(20), "name1 of sold-to-party
     name2_s(15), "name2 of sold-to-party
     land1_s(3), "country
     ort01_s(10), "city
     regio_s(3), "region(state/province)
     pstlz_s(10), "postal code
     adrnr_s(10), "address
     bstkd_e(10), "end customer purchase order
     posex(6),     "end customer PO line no(item no)
     kdmat(18),     "end customer material no(part no)
     kunag(10),     "ship-to-party
     name1_c(20),   "name1 of ship-to-party
     name2_c(15),   "name2 of ship-to-party
     land1_c(3),   "country
     ort01_c(10),    "city
     regio_c(3),   "region(state/province)
     pstlz_c(10),   "postal code
     adrnr_c(10),   "address
     posnr(6), "item no(seagate PO line no)
     pstyv(4), "item category
     matnr(18), "material no(seagate 9 digit part no)
     zmeng(13), "Target quantity in sales unit
    vrkme like vbap-vrkme, "sales unit
     meins(3), "UOM
    posnr_tot like vbap-posnr,"Total no. of line items
     werks(4), "plant
    vstel like vbap-vstel, "shipping point
     empst(10), "receiving point
     shtyp(4), "shipment type
     route(6), "route
     vsbed(2), "shipping conds
    rkfkf like vbap-rkfkf, "method of billing for co/ppc orders
     zterm(4), "terms of payment key
     inco1(3), "F.O.B inco term1
     inco2(3), "F.O.B inco term2
     end of t_upload.
Data: wa_upload like t_upload,
       i_upload like standard table of t_upload.
Data:v_kunnr like kna1-kunnr,
      v_posnr like vbap-posnr,
      v_matnr like vbap-matnr,
      v_zmeng like vbap-zmeng,
      v_kunag like kna1-kunnr.
*---Constants
CONSTANTS: c_comma TYPE c VALUE ',',   " For splitting data at commas
           c_01(2) TYPE c VALUE '01', " For movement code in Bapi
           c_b     TYPE c VALUE 'B',   " For mvt. Indicator in Bapi
           c_creat(5) TYPE c VALUE 'CREAT', " For button text
           c_clear(5) TYPE c VALUE 'CLEAR', " For clear button
           c_mvmt(4) TYPE c VALUE 'MVMT',
           c_ok(2)   TYPE c VALUE 'OK',
           c_error(5) TYPE c VALUE 'Error'.
*--SELECTION SCREEN DESIGN--
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
PARAMETERS:
            p_auart LIKE vbak-auart, " order type
            p_vkorg LIKE vbak-vkorg, " sales org
            p_vtweg LIKE vbak-vtweg, " dist channel
            p_spart LIKE vbak-spart, " division
            p_vkgrp LIKE vbak-vkgrp, " sales group
            p_vkbur LIKE vbak-vkbur, "sales office
            p_file(256) default 'c:/saleorder.txt'.         "File name
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN PUSHBUTTON 15(10) v_create USER-COMMAND creat.
SELECTION-SCREEN PUSHBUTTON 40(10) v_clear USER-COMMAND clear.
INITIALIZATION -
INITIALIZATION.
v_create = c_creat .
v_clear = c_clear.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM selectfile USING p_file.
*--AT SELECTION_SCREEN--
AT SELECTION-SCREEN .
IF sy-ucomm = c_clear.
    PERFORM f_clear.
ELSE.
   IF sy-ucomm <> c_mvmt.
**--- Validating the input data.
     PERFORM f_check_inputs.
    ELSEif sy-ucomm = c_creat.
*--- Validating the input data.
      PERFORM f_check_inputs.
*-- Uploading the PO data.
      PERFORM f_PO_upload.
*---checking the PO data
     PERFORM f_check_upload_data.
*---create sales order from PO data
    PERFORM f_Sales_order_create.
    ENDIF.
FORM f_PO_upload.
gfilename = p_file.
CALL FUNCTION 'WS_UPLOAD'
       EXPORTING
            filename                = gfilename
            filetype                = 'DAT'
       TABLES
            data_tab                = i_upload
       EXCEPTIONS
            conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            OTHERS                  = 10.
IF sy-subrc <> 0.
    MESSAGE i398(00) WITH '(WS_UPLOAD)'
    ' Errors occured with exception '
     sy-subrc.
ENDIF.
ENDFORM.                    " f_PO_upload
*&      Form selectfile
      text
     -->P_P_FILE text
FORM selectfile CHANGING value(filename) TYPE c.
CALL FUNCTION 'WS_FILENAME_GET'
       EXPORTING
            def_filename     = gfilename
            def_path         = 'C:\'
            mask             = ',*.txt.'
            mode             = 'O'
            title            = 'Select File Name'
       IMPORTING
            filename         = filename
       EXCEPTIONS
            inv_winsys       = 1
            no_batch         = 2
            selection_cancel = 3
            selection_error = 4
            OTHERS           = 5.
ENDFORM.                    " selectfile
FORM f_Sales_order_create.
PERFORM f_fill_header.
PERFORM f_fill_partner.
PERFORM f_fill_item.
PERFORM f_call_BAPI.
ENDFORM.                    " f_Sales_order_create
*&      Form f_fill_header
      text
--> p1        text
<-- p2        text
FORM f_fill_header.
move p_auart to wa_header-doc_type.
move p_vkorg to wa_header-sales_org.
move p_vtweg to wa_header-distr_chan.
move p_spart to wa_header-division.
move p_vkgrp to wa_header-sales_grp.
move p_vkbur to wa_header-sales_off.
Read table i_upload into wa_upload index 1.
move wa_upload-ebeln to wa_header-purch_no_c.
move wa_upload-aedat to wa_header-purch_date.
move wa_upload-bsart to wa_header-po_method.
move wa_upload-vdatu to wa_header-req_date_h.
move wa_upload-bstkd_e to wa_header-purch_no_s.
*move wa_upload-route to wa_header-route.
move wa_upload-vsbed to wa_header-ship_cond.
move wa_upload-empst to wa_header-rec_point.
move wa_upload-shtyp to wa_header-ship_type.
move wa_upload-zterm to wa_header-pmnttrms.
move wa_upload-inco1 to wa_header-incoterms1.
move wa_upload-inco2 to wa_header-incoterms2.
ENDFORM.                    " f_fill_header
*&      Form f_fill_partner
      text
--> p1        text
<-- p2        text
FORM f_fill_partner.
if not wa_upload-kunnr is initial.
select single kunnr from kna1 into v_kunnr
            where kunnr = wa_upload-kunnr.
if sy-subrc <> 0.
Message E014 with 'customer does not exist'.
else.
move 'AG' to i_partner-partn_role.
move wa_upload-kunnr to i_partner-partn_numb.
move wa_upload-land1_s to i_partner-country.
move wa_upload-name1_s to i_partner-name.
move wa_upload-name2_s to i_partner-name_2.
move wa_upload-ort01_s to i_partner-city.
move wa_upload-regio_s to i_partner-region.
move wa_upload-pstlz_s to i_partner-postl_code.
move wa_upload-adrnr_s to i_partner-address.
append i_partner.
endif.
endif.
if not wa_upload-kunag is initial.
select single kunnr from kna1 into v_kunag
            where kunnr = wa_upload-kunag.
if sy-subrc <> 0.
Message E015 with 'end customer does not exist'.
else.
move 'WE' to i_partner-partn_role.
move wa_upload-kunag to i_partner-partn_numb.
move wa_upload-land1_c to i_partner-country.
move wa_upload-name1_c to i_partner-name.
move wa_upload-name2_c to i_partner-name_2.
move wa_upload-ort01_c to i_partner-city.
move wa_upload-regio_c to i_partner-region.
move wa_upload-pstlz_c to i_partner-postl_code.
move wa_upload-adrnr_c to i_partner-address.
append i_partner.
endif.
endif.
ENDFORM.                    " f_fill_partner
*&      Form f_fill_item
      text
--> p1        text
<-- p2        text
FORM f_fill_item.
loop at i_upload into wa_upload.
if not wa_upload-matnr is initial.
select single maramatnr msegmenge into (v_matnr, v_zmeng) from
                   mara inner join mseg on maramatnr = msegmatnr
                   where mara~matnr = wa_upload-matnr.
if sy-subrc <> 0.
Message E016 with 'material no does not exist'.
elseif v_zmeng LT wa_upload-zmeng.
Message E017 with 'order quantity is greater than the quantity present'.
endif.
endif.
move wa_upload-posnr to i_item-itm_number.
move wa_upload-pstyv to i_item-item_categ.
move wa_upload-matnr to i_item-material.
move wa_upload-zmeng to i_item-target_qty.
move wa_upload-meins to i_item-target_qu.
move wa_upload-werks to i_item-plant.
*move wa_upload-meins to wa_vbap-meins.
*move wa_upload-posnr_tot to wa_vbap-posnr_tot.
move wa_upload-posex to i_item-po_itm_no.
move wa_upload-kdmat to i_item-cust_mat22.
move wa_upload-inco1 to i_item-incoterms1.
move wa_upload-inco2 to i_item-incoterms2.
move wa_upload-zterm to i_item-pmnttrms.
move wa_upload-empst to i_item-rec_point.
move wa_upload-shtyp to i_item-ship_type.
move wa_upload-route to i_item-route.
append i_item.
PERFORM f_fill_schedule_line.
PERFORM f_fill_conditions.
ENDLOOP.
ENDFORM.                    " f_fill_item
*&      Form f_fill_schedule_line
      text
--> p1        text
<-- p2        text
FORM f_fill_schedule_line.
move wa_upload-matnr to i_schedule-itm_number.
move sy-datum to i_schedule-req_date.
move wa_upload-zmeng to i_schedule-req_qty.
append i_schedule.
ENDFORM.                    " f_fill_schedule_line
*&      Form f_fill_conditions
      text
--> p1        text
<-- p2        text
FORM f_fill_conditions.
move wa_upload-matnr to i_cond-itm_number.
move sy-datum to i_cond-conpricdat.
append i_cond.
ENDFORM.                    " f_fill_conditions
*&      Form f_clear
      text
--> p1        text
<-- p2        text
FORM f_clear.
clear:p_auart,
      p_vkorg,
      p_vtweg,
      p_spart,
      p_vkgrp,
      p_vkbur.
ENDFORM.                    " f_clear
*&      Form f_call_BAPI
      text
--> p1        text
<-- p2        text
FORM f_call_BAPI.
clear:i_item,i_partner,i_schedule.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
SALESDOCUMENTIN               =
    ORDER_HEADER_IN               = wa_header
ORDER_HEADER_INX              =
SENDER                        =
BINARY_RELATIONSHIPTYPE       =
INT_NUMBER_ASSIGNMENT         =
BEHAVE_WHEN_ERROR             =
LOGIC_SWITCH                  =
TESTRUN                       =
CONVERT                       = ' '
IMPORTING
   SALESDOCUMENT                  = sorder
TABLES
RETURN                        =
   ORDER_ITEMS_IN                 = i_item
ORDER_ITEMS_INX               =
    ORDER_PARTNERS                = i_partner
   ORDER_SCHEDULES_IN             = i_schedule
ORDER_SCHEDULES_INX           =
ORDER_CONDITIONS_IN            = i_cond.
ORDER_CFGS_REF                =
ORDER_CFGS_INST               =
ORDER_CFGS_PART_OF            =
ORDER_CFGS_VALUE              =
ORDER_CFGS_BLOB               =
ORDER_CFGS_VK                 =
ORDER_CFGS_REFINST            =
ORDER_CCARD                   =
ORDER_TEXT                    =
ORDER_KEYS                    =
EXTENSIONIN                   =
PARTNERADDRESSES              =
if not ( sorder-vbeln is initial ).
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
write: /'Order number:', sorder.
else.
loop at i_return.
write: / i_return-id, i_return-number, i_return-message(80).
endloop.
*write: /'Error'.
endif.
*loop at i_return.
*write: / i_return-id, i_return-number, i_return-message(80).
*endloop.
ENDFORM.                    " f_call_BAPI

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
   Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

Purchase order contains an order price unit that differs from the order uni

Purchase order contains an order price unit that differs from the order unit
Treatment at the time of "Goods Receipt" so that the stock maintained in Kg and at the same time the purcahse order unit is also to be entered at the time of GR.

the purchase requisition has your valuation, this is not the price you have with your vendor.
The valuation in the PR, is automatically copied from material master, dependend on the price control, it is either the moving average or the standard price, the valuation of your current stock. If MAP then this valuation was calculated by historic stock values and receipts from maybe several vendors.
the valuation is mainly used for the release procedure.

Ordering using Unit-Of-Order

Similar Messages

Maybe you are looking for