Orders getting triggered again n again--

Hi experts,
it is a multiple counter plan
cycle unit - 32000 hr
in measuring point:-
annual estimate -8000 hr
counter overflow reading - 32000 hr
In measuring document- 16000 hr
Please let me know why the orders are getting triggered......

Hi Vicky,
I have observed the plan and found that cycle unit is 32000 HR in plan.
In measuring point Annual estimate is 8000 HR and in measuring document Counter reading is 16000 HR and last reading was taken approx 1 month back.
Please increase Annual estimate value in measuring point more than 32000 HR (36000, 40000 etc.) .And kindly update measuring document most frequently with latest counter reading.
Please implement above changes in Maintenance Plan.
Please revert if still issue comes.
Satyendra Mishra
SAP PM WCM Consultant

Similar Messages

When I close Firefox, then later want to start up again, I get I message that Firefox is still running. With "START TASK MANAGER", I need to close Firefox in order to start again.

When I close Firefox, then later want to start up again, I get I message that Firefox is still running. With "START TASK MANAGER", I need to close Firefox in order to start again.

I have the same problem. Firefox won't unload regardless of how long I wait. Literally hours ... I must go in and 'end the process'. This has been a real hassle for a while now. Even considered giving up on firefox. Please look into this! An additional problem; I have to run firefox to get the updates, but I can't get the updates to take because I can't get firefox to unload so I can restart it.

Hi guys, i just got my iPhone 4s and sometimes the signal is lost and i have to restart the phone in order to get reception again. do you thing there is a problem with the phone or with the carrier? thanks

Hi guys, i just got my iPhone 4s and sometimes the signal is lost and i have to restart the phone in order to get reception again. do you thing there is a problem with the phone or with the carrier? thanks

I have the exact same problem. Called my operator who told me it was a hardware issue and Apple is working on a fix...

After thread abort in Sandbox solution, the process is triggered again

Hi,
I am facing a problem of the process being triggered again, after thread abort of sandbox solution webpart on SharePoint 2013 Online.
I have created a sandboxed solution webpart and deployed it on SharePoint 2013 Online. The webpart contains two buttons. The click event of the buttons is added in CreateChildControls methods.
On the click of the first button, the process completes in 1 second.
On click of the second button, the process takes more than 30 seconds to complete. As a result, the thread aborts and the process being aborted is triggered again. This creates duplicate processing.
If I deploy the same solution on a SharePoint 2010 environment, the process is not triggered again after being aborted.
I am fine with the thread being aborted, but I am not able to understand why the process is being triggered again.
I want to stop the process from being triggered again after getting aborted.
Any help would be appreciated.

Hello !
       If no workflows are associated with the business object BUS2081 and the event POSTED, deactivate it at SWE2.
       Otherwise, you should resolve the cause for dump.To know the reason for dump, following transactions would be helpful : ST22,ST01,ST05 and ST12.
       Instead of checking at SWEQDEL transaction, check at SWEQADM transaction.
Regards,
S.Suresh.

At selection-screen on radiobutton group is triggering again on execute??

Hi Friends,
I want to show a Information pop up on selection of a radio button for that i have done
AT SELECTION-SCREEN ON RADIOBUTTON GROUP RG.
IF P_UPL = 'X'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        TITEL = TEXT-017
        TXT1 = TEXT-015
        TXT2 = TEXT-016.
ENDIF.
I have two radio buttons and second radio button is P_UPL. Its working fine.
But same event is getting triggered when execute button is pressed( i mean when report is executed ), which i don't want.
How to restrict.
Any help is greately appreciated.
Thanks,
Simha

when the event is clicked for the first time .
Initiate the before the popup is called .
Now when again when you execute and p_upl = 'X'
check the falg if value then don't call the pop-up .
and clear the flag at that moment .
So the Popup fun is ignored when you click execute event .
SEE THE lines in bold .
AT SELECTION-SCREEN ON RADIOBUTTON GROUP RG.
IF P_UPL = 'X'.
if v_flag is initial.
v_flag = 'X'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        TITEL = TEXT-017
        TXT1 = TEXT-015
        TXT2 = TEXT-016.
ENDIF.
ENDIF.

I lost my serial number where I can get it again? Thanks in advance.

Hi All,
I would like to know where I can get my serial number for Fireworks because I installed on a different system and I lost the serial number. There is a number where I can call in order to get it again?
Thanks in advance.

Hi Frol,
Please go through the link below.
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Regards,
Anand

HT5228 I am running OSX 10.5.8 and am told I need to update Java in order to protect agains tthe Flashbck Trojan. But cannot figure out where to download such an update. Any help?

I am running OSX 10.5.8 and am told I need to update Java in order to protect agains tthe Flashback Trojan. But cannot figure out where to download such an update. Any help?

michael60 wrote:
Many, many thanks.
In my Java Prefs App I unchecked
J2SE 5.0
J2SE 1.4.2 was already unchecked.
Did I get this right?
Wasnt sure if I was was disabling Java or Java Script here....
That is Java. Those are also really old versions. You can actually keep them turned on in Java Preferences.
What you want to change is in Safari > Preferences > Security and turn off Java there. Leave Javascript turned on.
This way, the only thing you disable is Java applets, which are useless anyway. If you need to run any Java programs, they will still work. If you have any specific site that requires a Java applet, you can always turn it on just for that site and turn it back off when you are done.

Output fax not getting triggered when sales order credit block is released

Hi Experts,
I am working on an issue.
I have one sales Order which has credit block.
when we release the credit block via vkm3, then the output fax gets triggered.
I have another sales order which has credit block,
when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
Any advice on this please.
Regs,
SuryaD.
Edited by: SuryaD on Oct 21, 2010 9:34 PM

Hi Brad,
Thanks for your response.
Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
I went to Go to -Determine analysis for both orders 1 and order 2.
in both the analysis i am able to see the output ZFAX.
*Analysis Output*
*Order 1                                                                    Order 2*
1. ZFAX                                                                   1.   ZFAX
    10(Z010)                                                                 10(Z010)
       0000122426                                                              0000122427
2. ZFAX                                                                   2.   ZFAX
When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
There in just 2 differences as below.
In the above screen,
1.Order 1 ==> has some value 0000122426
2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
Diagnosis
Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
In the above screen
1.Order 2 ==> has some value 0000122427
2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
No more information is available.
Please guide as to how to initiate the debug for output processing ?
Which screen where to switch on debugger.
where to look further?
Regards,
SuryaD.
Edited by: SuryaD on Oct 22, 2010 11:41 AM

My itunesu says I have downloaded the lectures, but the files are not on my computer, how do I "get" them again

Hi there. I was downloading lectures from iTunesU. The status shows them as downloaded, however two lectures in the series are not on my computer/iPad. How do I "get" them again?

The downloaded content should be in the iTunes U section of your music app. To navigate to iTunes U content launch the music app, click more and look for iTunes U on the resource list.
Additional resources
http://www.apple.com/education/itunes-u/includes/overlay_introduction.html#overl ay-introduction
-Regards

How can i get photoshop again on my computer after I throw it away?

Hey there, I am Loes from the Netherlands and I have a question, I tried a lot but it does not work. Hope you can help me..
I wanted to reset the settings of my photoshop, but this didn't work, so I though maybe if I delete photoshop and then install it again I can start over.
So I did. But now I cannot find photoshop anymore. I installed creative cloud again and again but creative cloud says photoshop is "up to date". and there is no way to click on it to download it again. Does anyone know were I can get photoshop again?? Hope you can help me. I just started to try 30 days for free but now i cannot use it.
then if I will have photoshop again I also like to know how I can reset the settings of my brushes.
Thank you very much!

CC desktop lists applications as "Up to Date" when not installed

Airport no longer works with my MacBooks. Help an old lady get wireless again!

First, I have to tell you that I'm as dense as granite when it comes to technology, so please talk to me in the simple terms you'd use with a dazed higher primate. Assume that I know nothing.
My story: I have the world's oldest MacBook Pro and am also using a new MacBook Air. I had a new Airport base station that was working fine with the MacBook Pro until I moved two years ago. I know nothing was dropped or mishandled, because I moved the electronics myself. But when I set up stuff in the new house, with Airport in a spare room and using the laptop in my bedroom where I have little room for anything but me, the MacBook would no longer recogize the Airport.
I tried moving Airport into the same room, thinking there might be something wierd with the walls of the house, but still no dice.
So I've been wired to the Comcast modem ever since. I trip over cables so often, I can do it in the dark.
Things are getting complicated now, because I've added a printer/scanner. Since I can't use it wirelessly and don't wish to trip over the cable every time I stand up, I hardly ever use the thing. Also, I'm shopping for a new TV and have dreams of being able to connect it with the Mac for watching movies, etc. The thought of using more cables makes me sad.
BTW, I'm currently using a borrowed MacBook Air, circa 6 months ago. It doesn't recognize Airport either. Airport is currently sitting in its box, bored and depressed.
Since nothing I own is under warranty any longer, I'm looking for free advice here instead of paying Apple by the hour.
Two questions:
(1) the ****? How do I get wireless again?
(2) Is Airport interchangeable with other wireless modems, like the one Comcast offers me?

When you connect your MacBook Pro to the Comcast modem using its Ethernet cable, you are establishing the same sort of connection with it that would be used by your AirPort sitting in the box. The modem does not care what is connected to it, but it can connect to only one device at a time. Most of them "remember" that device as long as it is powered up, and will refuse to communicate with anything else.
So the first thing to do is power down the modem. Unplug it. Then, connect your AirPort's WAN port to it (Extreme or Express, whichever one you have) and then power them both up. With any luck your MacBook Pro might just connect wirelessly like it used to in your last home.
If it does not, you probably need to reconfigure the AirPort Base Station again as if it were new. To do that, "hard reset" the AirPort Base Station by pressing its tiny reset button and holding it depressed long enough for its LED to flash rapidly. Then, the LED will glow solid amber for a moment or two, then it will begin to flash slowly. When that occurs select its network in your Mac's Wi-Fi menu. Its name will be "Apple Network nnnnnn" where nnnnnn = a code unique to your base station. Select it.
Then, launch AirPort Utility - it is in your Utilities folder - and it will detect that your AirPort base station has been reset. Click the Continue button, answer the questions, and it will reconfigure the AirPort to those settings. The questions should be self-explanatory. When you are finished you will be prompted to restart the AirPort.
The next step confuses people, because after restarting the AirPort Base Station the network name that you had been using to configure it immediately ceases to exist. AirPort Utility may as well just sit there forever so just quit AirPort Utility. You have to manually select the network you just created by selecting it in the Wi-Fi menu again.
If you run into problems and need more help, meaning you must communicate using the Internet again, just remember the first paragraph - power down the modem whenever you change what is connected to it. Make it a habit.

I've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should i do???

i've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should I DO ??? TS KEEP ON RESTARTING ALL THE TIME

Hi there balaji007,
You may find the troubleshooting steps in the articles below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

ALE Change pointer BDCPS table gets processed again and again

Hello,
In Test system, when we run BD21 for DEBMAS, same change pointers getting processed again and again. This did not happen in Dev.
We did client copy for building Test system from DEV (Gold client).
Is it possible to carry over few table entries from Dev (even though it is gold client) and these entries cauing aboev problem while runnign BD21?
Is there any way to get rid of it? Will BD22 help?
Thanks.
Rupali.

>
Rupali K wrote:
> Hello,
>
> In Test system, when we run BD21 for DEBMAS, same change pointers getting processed again and again. This did not happen in Dev.
> We did client copy for building Test system from DEV (Gold client).
>
> Is it possible to carry over few table entries from Dev (even though it is gold client) and these entries cauing aboev problem while runnign BD21?
>
> Is there any way to get rid of it? Will BD22 help?
>
> Thanks.
> Rupali.
Hi Rupali.
BD22 is used for erase change pointers. Why don't use WPMU ? or WPMA ? Using transaction WPMU, this
take change pointers, and mark it like processed. I'm using WPMU, and it's working.
Regards.

Hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.

My iPad is disabled after entering many wrong passcodes by my kid, and is asking me now to connect to iTunes to get enabled again (unlocked), however when I connect to iTunes, it asks me to first unlock the iPad? what is the solution

my iPad is disabled after entering many wrong passcodes by my kid, and is asking me now to connect to iTunes to get enabled again (unlocked), however when I connect to iTunes, it asks me to first unlock the iPad? what is the solution

You need to place the device in recovery mode ...
f you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
Instructions for putting the device in recovery mode > iOS: Unable to update or restore
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present

Orders getting triggered again n again--

Similar Messages

Maybe you are looking for