Orders triggering without output type

Hi Gurus,
Can anyone guide if we can trigger outbound orders (sales orders) without Output type?
Any suggestion will be greatly helpfull.
Regards,
Nitin

Hi nitin
Message control is only technique to generate the IDoc ...provided by SAP.
There is no alternate method...
I can suggest you that... if you donu2019t want to create sales order IDoc (outbound) immediately
Hold on with yellow status output type and generate the IDoc when ever you want by scheduling the RSNASTED...
Thanks
Ramesh

Similar Messages

  • IDoc triggering without Output type?

    Hi Experts,
    I need a help regarding triggering of IDoc. I need to trigger an o/b IDoc for message type SHP_OBDLV_SAVE_REPLICA without having output type on creation or save. Could you please anyone advise is there anyway to do it? It would be great if someone have come across for this kind of req and would helpful for me share same with me.
    Thanks.

    Hi Brad,
    Thanks for your input. Is there any o/b process code exists for Idoc type SHP_OBDLV_SAVE_REPLICA02? Could you anyone share if there is any.
    Thanks

  • Getting a PDF by triggering an Output Type

    Hi All,
    I have created an Output Type in NACE. Say ZRUD. In Nace I have configured it to a PrintProgram.
    Then please tell me the next procedures, through which I will be able to generate a PDF not by directly executing the smartform, but by triggerring the output type.

    You need to fire the output on the specific printer which has a device type of PDF1.
    Your basis guys can help in this regards.
    Regards,
    Naimesh Patel

  • MM Purchase Order IDOC NEU output type configuration

    Hi All,
    after creation of Purchase Order in ME21N in ECC 6.0 server, i want an IDOC for Purchase order to be created...........
    i saw there is a standard output type NEU and it has EDI and Distribution Model as medium..........
    when i went to ME21N and specified in message button output type of NEU, then the PO which i created had a NEU in messages but on opening  a new session and running ME21N and creating a second PO, then in this PO there is no output type for NEU....
    So i want to know in SPRO where is the exact location which specifies which output type will be triggered for IDOC creation on PO creation in ECC for message control...............
    plz help guys...........

    Hi,
    If it configured for EDI and Distribution Model , now check condition record in T.code:MN06{ if you are geeting for one PO, you should get for other PO also)
    Also check the following confi. details for Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select: 
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order{NEU}
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create ,,,use medium '6' 
    Now you create PO (ME21N) and save it and then release.
    Also check in NACE t.code for standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines and for the output type for default values, a communication strategy needs to be maintained in the Customizing that supports . You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy).
    Regards,
    Biju K

  • Print purchase order caption by output type

    Hi,
    I have created the new output type"ZNEU" for the taking the Purhcase order printout.
    When  I did  i the changes in the PO simulatenously I have maintained  the versions in the PO.
    Then  I take the Printout by using NEU o/p type.Then in the printout the header comes as "Changed Purchase orders".
    But when i take the printout by using the "ZNEU" output type , then  in the printout "Changed Purchse orders "is not appears.
    It is appearing as "Purchase order'.
    Now my requirement is that ,if the printout is taken for the amended PO (with version maintained ), by using "ZNEU" output type ,the heading should be appear as "Changed Purcahsed order".
    Pl. let me know how can i do this ? Whether this is related to config setting or need to change in the Program?
    Thanks in advance,
    Regards,
    CVB.
    Note : Subject line changed.
    Edited by: Jeyakanthan A on Jun 9, 2011 1:01 PM

    Hi,
    Check in configuration check step Set Up Change Displays
    Whether you need to add that field in that place or not?
    Also check the remaining steps also again if any missing there.
    Regards,
    Rahul .

  • Delay triggering of Output type

    I have a requirement, wherein when I do a PGI in VL02N, 2 Output Types Z1 and Z2 are triggered.
    Z1 will generate the Billing Doc and Z2 will print a form with all the details inlcuding Billing Doc Number.
    However, Z1 takes time (abt 30 sec) to generate Billing Document, and Z2 generates the spool simultaneously but does not display Billing Document in the form, as Z1 has not yet completed.
    Is there any way, we can delay Z2 or trigger Z2 only after Z1 is completed.
    Note : We don't want to use batch job.
    Am new to output types, so kindly explain in detail the steps for solution.
    Thanks
    Vivek

    Hi,
    We have worked on a similar requirement. In our case we triggered the output Z2 at the time of billing. So configure Z1 during PGI in delivery and Z2 in billing. We adopted the method, you are having currently, initially. But in case of error during billing creation it was very difficult to handle the errors. The delay of 30 sec. could increase if you have huge load.
    I would suggest it is logical to print only after the billing document is created so you can look at this option if you like.
    Cheers,

  • Form triggering through Output type

    Hi All,
    There is a issue which i am facing , I have create a output type ZFIN and attached a custome program xyz with this outputtype. when the output is triggered throught transaction VL32n the custom program should be trigger but ther is an error raising which is going to my SAP inbox that is " PERFORM_TOO_MANY_PARAMETERS".
    Regards
    Dhiraj Shetty

    Hi,
    1. Run transaction SU01
    2. Enter <user name> => EDIT
    3. Go to tab 'Parameters'
    4. Select parameter ID = 'NDR' and enter value 'X'
    5. Save
    Done

  • Automatic triggering of output type in Goods issue

    Hello Experts,
    I am trying to pick the output type while creation of goods issue document using transaction MB1A. After creation, it is not coming automatically. I did the customization setting for maintaining conditions based on output type WA02, adding trans/Event-WA, print version-3, print item-1 but still it is not populating automatically while creation of GI document.
    Could you please let me know, how to do it or if i am missing some customization.
    thanks,
    Karun

    Hi,
    To trigger the OUTPUT automatically you have to maintain the CONDITION RECORDS in MN21
    Goto the Transaction code MN21 and enter the OUTPUT type as WA02 and give the following details
    Trans/Event type
    Print version
    Print item
    partner function
    Medium
    Date/Time
    Language.
    After maintaining this check whether the OUTPUT determined automatically or not.
    I hope it will determine automatically.
    thanks,
    santosh

  • Triggering of output type

    Hi Experts,
    I have two output  types and the output type 2 should only trigger if the output type 1 has processed.
    we have coded  in a routine in transation V/27 , and attached it to output type "ZWMA". 
    As per the logic In the routine we are checking the NAST entries , if successful we are marking sy-subrc  as 0 ( suceessful).
    The issue we are facing though values exist but nast table is not popultaed with thse values at the time of execution of routine and hence the check is failing ..
    do we have any other way to check if one output type is processed before executing another output type  and only tigger outpute type 2 if output type1 has processed;
    like something about about access sequence or configuration through which we can solve the issue
    thanks experts!!

    Hi there,
    Make use of element VSTAT  in NAST table for checking the Processing status of message as and when u require to do it.
    Hope it helps.
    Regds,
    abhee

  • Process order confirmation without 101mvt type

    our client is  a process industry.client need during process order confirmation Background 101 not happen.
    Step : 1 Process order create
    Step : 2 Goods issue The material -261
    Step:  3 Process order confirmation   (No 101)
    Step:  4 Goods Receive (MIGO) 101 happen 
    Following Steps Process only,
    cork-only activity confirmation only,after Activity  confirm GR will Happen , how to configure in the system,any user exit or sap note there in the sense tell me?
    Thanks For Advance

    Hi Thiyaharaajan,
    For Goods issue i believe you are using MB1A/MIGO. You also use backflush to automatically issue the material during confirmation.. For this maintain Backflush - 1 in material master MRP 2 view.
    Also during confirmation for doing Auto GR (101 movement type) you need to assign the control key ticked with Auto Goods Receipt for Last operation/phase of Master Recipe.
    Thanks & Regards,
    Ramagiri

  • Debugging the program that will get triggered for a particular output type

    Hi all,
             I have one program,which will get triggered when a Sales order of type 'VOR' is created.Whenever 'VOR' order is created it will trigger the 'ZALT' output type.And this output type 'ZALT'has been configured to my program.This output type configuration has been set up by my functional consultant.
    My problem is I created Sales order of type 'VOR'.But I want to debug my program,which has to be triggered because of that 'VOR' sales order type,which in turn triggers 'ZALT' output type and in turn triggers my program.
    My problem is I created Sales order of type 'VOR' by keeping debugging point in my program.But it is not going to my program and simply displaying sales order has been saved.
    So is the outtype has been configured properly?.Do I need to go to my functional consultant?Could anyone explain in this regard?
    Rgds,
    Balaji

    Hi Balaji,
    If possible, try to repeat the output in the output type messages screen of VA02 and change its dipatch time to '1'(Through further data). Now put the break point in the program assigned to output tye 'ZALT'(You can see this in the TNAPR table) and run the program RSNAST00 through SE38. The program will stop at the break point.
    If its not possible to repeat the output and if you want to check it the first time the output type is processed, ask the functional consultant to change the dispatch time in the condition record that is being retrieved for proposing the output type to '1'. Now run RSNAST00. The program will stop at the breakpoint.
    Thanks,
    Vinay

  • Proforma Invoice triggers automatically through delivery output type

    Hi Gurus,
    Iam facing one issue related proforma invoice, senerios is sales order- once delievry saves, it triggers one output type ZGF8, and it triggers Proforma invoice type ZGF8.
    In delievry output type ZGF8, we have output program Z_EVT_LIKP_OUTPUT, and Form Rouitne CREATE_EVENT.
    Now user want to differnt delivery type and differnt proforma invoice type same as above.
    My question is how the system is triggers ZGF8 proforma billing type automatically, where in the system have the setting.
    Please guide
    Thanks
    Ramki

    in creation mode you can see kew combination this will show your access sequence criteria.
    Go to NACR display mode in header condition info ,click condition info tab with entering any values in screen this will show the details

  • VL01N delivery saves triggers Proforma Invoices through delievry output typ

    HI Gurus,
    Iam facing one issue related to work flow, senerios is sales order- once delievry saves, it triggers one output type ZGF8, and it triggers Proforma invoice type ZGF8.
    In delievry output type ZGF8, we have output program Z_EVT_LIKP_OUTPUT, and Form Rouitne CREATE_EVENT.
    Now user want to differnt delivery type and differnt proforma invoice type same as above.
    My question is how the system is triggers ZGF8 proforma billing type automatically, where in the system have the setting.
    Please guide
    Thanks
    Ramki

    Hi Ram Ki,
    I think your problem is more toward the setting of the output determination. You can consult with your functional consultant who normally set this up.
    For your reference, you can go to transaction NACE, where you can see:
    1. Procedure that is active
    2. Output type belongs to the procedure
    3. Access Control which fields used for comparison
    4. Condition record which values used for comparison, to determine whether the output type is to be triggered.
    Regards,
    Lim...

  • Output type triggers HU and PGI

    hi,
    I am associating an output type in delivery to trigger creation of HU and PGI.
    When i run it independantly without output type, it is working.
    But, when triggered with output type , it is giving call transaction command as illegal command.
    Is that because i am calling same vl02n for creation of HU?
    If that is the reason, let me know how to handle it?

    Hi Gaurav,
    Please see the output determination message first to understand the problem.
    If the output determination is saying that the requriement not fulfilled, it means the requriement routine is checking for something other than PGI, which needs to be completed.
    If the requriement routine is fulfilled and Outputy type not triggered, then it is a master data issue.
    Please check what is the issue first.
    Regards
    Krishnam Raju

  • Purchase Order Output Types

    Hi,
    My requirement is that clients needs different header in Purchase Order Printout based on Plant. Means for each Plant we need a particular Header in Purchase Order.
    I have found that for Purchase Order, Standard Output Type NEU is there and we attach either the standard Layout 'MEDRUCK' or custom layout to it.
    Now I am thinking of making multiple Custom Layout(Copies of MEDRUCK). And also making a separate Output type for each Plant. then I will attach the appropraite Layout to each Output Type created.
    1. My Question is can we create multiple Output Types?
    2. And also attach multiple Output Types to a PO. And select any one(based on the need) at the time of Printing?

    Hi Nitin,
    1) You can create multiple output types for a purchase order and each output type will have different layout names when use assign outtypes through transaction NACE.
    2)Yes,You can select a particular output type for a PO.
    Just specify a parameter in your driver program which will accept output type(KSCHL).
    I recommends you not to create multiple layouts based on each plant. Try to create a Pagewindow in your layout which can hold PO header data.Based on your plant you can pass values through text elements to Pagewindow.You can simply write code for this in your driver program.
    Note:Plz award points if is is helpful
    Thanks,
    Vinay

Maybe you are looking for