Ordinal dates in SSRS 2008

hi there,
           I have created a report, here I need to show ordinal date. Could anyone plz tell me how to add ordinal date in SSRS 2008.
Eg: 1st , 2nd , 3rd etc
I want date in following format
Todays date : 16th
                         or
                     16th May 2010
I am doing this way, is it correct?
=iif(Format(Now(),
"dd")= 01,Format(Now(),"dd")
& "st",
iif(Format(Now(),
"dd")= 02,Format(Now(),"dd")
& "nd",
iif(Format(Now(),
"dd")= 03,Format(Now(),"dd")
& "rd",
Format(Now(),
"dd") &
"th" )))

Similar Messages

Ssrs 2008 r2 date parameter not working all the time

In an SSRS 2008 r2 report, I am not getting some records selected when I run the report in the ssrs 2008 r2 report.
However when I run the sql in ssis manager, the records are selected. Thus I am trying to determine why some of the records are not selected whe running the ssrs report.
In the table called 'transactionfile', the fields that I am trying to determine where there is a problem is the following:
SchoolNumber (varchar(50),null), and
TransactionPaymentDate (varchar(50),null).
Examples of data are SchoolNumber = '121' and TransactionPaymentDate = '04162014'
In the SSRS report, the parameter value for @SchoolNumber is text and the parameter value for @EndDate and @StartDate is date/time.
The following is the query I am having a problem with:
SELECT s.SchoolNumber,
      CONVERT(smalldatetime,substring(TransactionPaymentDate,5,4) + '-' + substring      (TransactionPaymentDate,1,2)+ '-' +
substring(TransactionPaymentDate,3,2)) as        TransactionPaymentDate
from [eF].[dbo].[transactionfile] f
       INNER JOIN
    [eF].[dbo].schools] s
    on rtrim(ltrim(s.SchoolNumber)) =rtrim(ltrim(f.SchoolNumber))
where rtrim(ltrim(s.SchoolNumber)) = rtrim(ltrim(@SchoolNumber))
      AND
      Cast(Right(TransactionPaymentDate,4)+Left(TransactionPaymentDate,4) as Date)
        >= @StartDate
     AND
   Cast(Right(TransactionPaymentDate,4)+Left(TransactionPaymentDate,4) as Date) <= @EndDate
Thus could you suggerst what could be wrong when selecting some records by date?

First check whether transaction payment date has 8 digit or not. In yes then try the below query,
SELECT s.SchoolNumber,
CONVERT(smalldatetime,substring(TransactionPaymentDate,5,4) + '-' + substring(TransactionPaymentDate,1,2)+ '-' +
substring(TransactionPaymentDate,3,2)) as TransactionPaymentDate
from [eF].[dbo].[transactionfile] f
INNER JOIN [eF].[dbo].schools] s
on rtrim(ltrim(s.SchoolNumber)) =rtrim(ltrim(f.SchoolNumber))
where rtrim(ltrim(s.SchoolNumber)) = rtrim(ltrim(@SchoolNumber))
AND
cast(substring(TransactionPaymentDate,5,4) + '/' +
substring(TransactionPaymentDate,1,2)+ '/' +
substring(TransactionPaymentDate,3,2) as date) between @StartDate AND @EndDate
Regards, RSingh

Restored our SSRS 2008 R2 from one server to another; Dates are in UK format and not US

We have restored our SSRS 2008 R2 from one server to another. The original server was in US locale/culture. The new server was in UK locale/culture, when the restore happened. However it should have been in US locale/culture. We have made this change and
new reports work OK.
However existing reports (i.e. saved by a user) are still trying to use the US dates in a UK format and as a result throwing a date cant be below 1753 error.
Has anyone seen this issue before or have any idea what we need to do to fix it?
Thanks
Kimberlad

Hi Kimberlad
Have you checked any changes in the Collation?
Please verify Reporting Server Databases and Server Collation is there any mismatch with your Source Server.
and also please post complete Error message..
Nag Pal MCTS/MCITP (SQL Server 2005/2008) :: Please Mark Answer/vote if it is helpful ::

SSRS 2008 R2 - Missing Data when Exporting to Excel or CSV (Row Count is 500)

Hey Folks,
When exporting SSRS 2008 R2 report to an csv or excel file not all the rows are being exported. Any suggestions on why this is occurring. The number of rows is less then 500 and it seems to be a pretty straight forward export. Any help is
greatly appreciated. Inherited this and not sure if this would be configuration issues or something else. It is happening on a number of reports.
Thanks.

Hi Humbly,
According to your description, when you export report into CSV or Excel format, some rows are missing.
In your scenario, since you are missing data “rows” in your exported file, we are guessing if you have any visibility setting like toggle which hide those records. It’s possible that you have set toggle or visibility in your report. After exporting
Excel/CSV, some data might not appear properly. In SSRS 2008 R2, it has reported this kind of issue about data missing after exporting. However, those scenarios are not exactly same as your issue. It mostly turns out be conflict between data and “layout render”
and related to DataElementOutput property. DataElementOutput property controls export behavior, it indicates which report item data should appear in Excel/CSV render. For more information, please refer to this article: Reporting Services:
Why aren’t all my report columns exporting to CSV and/or XML?.
As we tested in our environment(SSRS 2008 R2), no matter what we export into CSV or Excel, we get same results as in BIDS . So I would like to know your report design structure. If possible, please provide some screenshots about results in BIDS and Excel/CSV
render extension results. It may help us find out the root cause of your issue. Thank you.
Best regards,
Qiuyun Yu

Ssrs 2008 r2 obtain today and yesterday's date

In an SSRS 2008 r2 report, I want to set the default value to yesterday's date in a parameter called startdate. In a parameter called enddate, I want to set the default parameter value to todays date.
I have tried the following to set the default values:
=today()
and
=DateAdd("d".-1.today()).
The above does not work.
Thus would you let me know how to set the default parameter values of start date to yesterday's date and the enddate to today's date?

Why it didnt work? what did it give you? Its working fine for me
Are you trying to strip off time part?
if yes try like
=Today().ToString("mm/dd/yyyy")
or whatever format you want
similarly
=DATEADD(DateInterval.Day,-1,Today()).ToString("mm/dd/yyyy")
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SSRS 2008 R2 - Dynamic header data stays the same when exporting

Background:
I have a SSRS 2008 R2 report with a single Tablix.
The data is grouped by InvoiceID, with each appearing on a separate page.
I'm displaying some of the detail data in the group header row using Expressions similar to the following:
="Invoice # " & ReportItems!InvoiceID.Value"
The data referred to by my ReportItems statements are all hidden in the detail row (Advanced Mode, the Hidden Value for the Static Row Group is set to false).
Problem:
When I Preview the report in Visual Studio, everything looks as it should - the dynamic header data changes correctly with each group.
However, whenever I export the results (I've tried all the formats), the header data is the same for every group - its taking the values from the first group and using it in all the groups.
I've copied the same expressions into my Totals row, and the data is correct when exported; its only happening in my header rows.
Any help in resolving this is greatly appreciated, thank you.

Hi Alex,
According to your description, you have a header with expression contains ReportItems. Now you find it shows incorrect result when exporting to a file. Right?
In Reporting Services, it has reported some similar issue that the ReportItem returns unexpected result when exporting. In this scenario, since you just want to show the group name in each page as a header for detail rows. So you can make the
detail rows group on the Group. Then delete the Group column but still keep the group. After that add a row above detail row (Out side of group) and put in "=Fields!InvoiceID.Value". Now it will show the corresponding Group name
when you set page break between each group instance. We have tested this case in our local environment. Here are screenshots for your reference:
Reference:
SSRS
field expressions using ReportItem refrences have unexpected results when exporting
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How do i format date and time in SSRS 2008

Okay, so i am working with SSRS 2008. I am formatting the date and time. Right now the current out put is 1/13/2014 8:02:11 AM. I want the output to
be 1/13/14 8:02 AM. What is the expression for this?
Thanks in advance

There are 2 functions that can be used, Format and FormatDateTime.
http://www.jackdonnell.com/?p=122
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

SSRS 2008: how to show an empty chart with legend and x and y axis when no data available

Hi,
I am using SSRS 2008, I generated one chart in report designer with the data from Analysis Services (Cube).
According to the dataset, there is no data returned when I run the query. so when I preview the chart, there is nothing but "no data available" showing on the chart.
Here I want to know is there any possible to show an empty chart with legend and x and y axis?
If it is possible, can you tell me how can I make it?
Best Regards.
Connie Zhu

Hi,
When there is no data, the chart displays the message "no data available". But using a little work around, you can display an empty chart.
Please find the below steps given to achieve this
1. Create a new dataset using TSQL to return 1 row of data having the category field and value field set to 0. Add the fields that are necessary for the category fields, series fields and datafields.
   A simple example would be like
   SELECT 'abc' as Category, 0 as Amount
2. Add a new chart, set the category field to 'Category' and set the data field to Amount from above dataset created in step 1.
3. In the new chart, right click the category axis and select axis properties, Click on the labels tab, check on
'Hide axis labels' and then click ok
4. Now set the Visibility property of both the charts depending on the rows returned from your main dataset
   a. click on your main chart and set its Hidden property to :
=iif(CountRows("MainDataSet"),false,true)
   b. click on the new blank chart added and set its Hidden proprety to (the opposite) :
=iif(CountRows("MainDataSet"),true,false)
   Note : Please change the dataset name in above expression "MainDataset" to the name of your chart's dataset
5. Resize the new chart to the same size as your main chart, then position the new chart on the place as the main chart.
   (Note : You can set the position of new chart to be same by copying the location property from the main chart)
6. Now run and observe the result. When there are no rows returned by your main dataset, the new chart (the blank chart) should be displayed.
I've added a working sample of this kind of a report
here.
Hope this helps. Please feel free to discuss if you have any questions.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

SQL SSRS 2008 DateTime Calendar Control and Oracle 10g Data Source

Hello. I am creating reports in SSRS 2008 using the calendar control for a date range. Let's say we select a start date of 3/3/2012. This parameter is sent into my SQL statement in the WHERE clause which is executed against an Oracle 10g database. All syntax has to be in SQL that Oracle understands, so no CONVERT or CAST.
The format of the date is throwing an error "ORA-01843: not a valid month" when I try to use the following:
SELECT *
FROM TABLE
WHERE STARTDATE >= TO_DATE('3/03/2012', 'MM/DD/YYYY')
I get ORA-01722: invalid number when I try the following:
SELECT *
FROM TABLE
WHERE STARTDATE >= >= TO_CHAR('3/03/2012', 'MM/DD/YYYY')
I cannot find a way to format the date parameter in SQL Server SSRS before it gets to the SQL to be executed in Oracle.
Please help.
Thanks,
Sunny

920616 wrote:
sb92075: I am showing you how Oracle renders the date if I do a simple select from the table from which I am trying to pull data. You are right, it sure doesn't prove anything other than how the date looks right out of the Oracle database, but hopefully, it will give a clue as to how I need my SSRS date parameter to work.
Hans Forbrich:
I get ORA-01722: invalid number when I try the following:
SELECT *
FROM TABLE
WHERE STARTDATE >= TO_CHAR('3/03/2012', 'MM/DD/YYYY')
Solomon:
It works. The problem is getting the parameter '3/3/2012' into a usable format for Oracle.
Let's assume an application is sending in '3/3/2012' which will be used in an Oracle query (no PL/SQL allowed, nor can I create functions, stored procedures, etc - only straight up SQL). How can I prepare the parameter to successfully do the compare on the Oracle Date field?
12:50:23 SQL> select TO_CHAR('03/03/2012', 'MM/DD/YYYY') from dual;
select TO_CHAR('03/03/2012', 'MM/DD/YYYY') from dual
ERROR at line 1:
ORA-01722: invalid number
12:51:00 SQL> ed
Wrote file afiedt.buf
1* select TO_DATE('03/03/2012', 'MM/DD/YYYY') from dual
12:51:20 SQL> /
TO_DATE('03/03/2012
2012-03-03 00:00:00

Data Retrieval from SSRS 2008 R2 to SQL Server 2012 standard

Hello,
We have a virtual machine running SSRS 2008 R2 and a physical server running SQL server 2012 standard. We are having an issue with a report that is taking almost 10 minutes for the data to be retrieved from the sql 2012 database. We used the
execution logging query to debug and analyze. We see that it renders and processes very fast, but the data retrieval time is very slow. When the same query is run using sql studio mgr. from the SSRS server it runs just fine...it
takes seconds for the results to come up.
I don't believe there is a compatibilty issue because other reports run fine. We're just having problems with one report.

A long shot, but I've seen where the data type of a report parameter is mismatched against the data type of the table it is being compared against. SQL profiler would show this clearly.
This would explain why the query returns quickly in ssms but not with the report.

Issues passing drillthrough parameters from a multi-level tablix in SSRS 2008 R2

Hello,
I am really struggling with trying creating a drillthrough report that starts with a matrix (tablix) and passing those parameters. I am using SSRS 2008 R2.
Here's my scenario:
I have a matrix that has mulitple levels where you can drill down. Here an example with all the levels open:
Active
Term
Leave
Total
128
88
121
United States
110
80
85
New York
65
30
57
Manhattan
10
6
9
Buffalo
20
23
4
Albany
35
1
44
Texas
45
50
28
Dallas
40
30
22
Houston
5
20
6
France
18
8
36
Centre
18
8
36
Blois
7
2
8
Druex
6
1
15
Tours
5
5
13
I want to drillthrough to another report - Detail Report. As I understand it, I would click the 65 for New York and I would see the detail for the 65 Active people. If I click the 2 under Blois, I would see the 2 terminated people in Blois. My understanding
for this to work, the Detail Report would need a a parameter for each of the level possibilities in the matrix that I could click: Country, State, City as well as the Status (Active, Term, Leave).
While I understand about passing parameters, what I don't understand is how to pass the parameters if they are blank. Let's say I clicked 65 for New York, I would need to pass State = New York Status = Active. But the remaining parameters (Country
and City would be null). I know Country doesn't need to be Null in this case.
My Detail Report has the parameters defaulted to Null, but whether I put the parameters in a Filter for the dataset or in the query itself, I cannot get it to ignore the Nulls.
As a crazy work-around (I think) I can put in the Where of the query something along the lines of: this:
and (a.Country in (@paramCountryCode) or NULL in (@paramCountryCode) )
and I would need to do that for each parameter. Usually I have to use 'ALL' instead of NULL, I'm note sure why.
Additionally, in the Report Action of the Main Report, I need to pass those parameters for each level and their Status. I am also not clear whether or not I need to put in all the parameters on each of the levels (Country, State, City) of the matrix. And if
I do, do I need to make the expressions an IIF statement stating whether or not they are In Scope?
All the examples I was able to find, only showed one or maybe two parameters being passed. Doing the way I am trying, seems convoluted, error-prone and tedious. I really hope that I am wrong.
Is there a better way to approach drilltrough reports from a matrix when there are multiple levels?
Thank you for the help.
~J

Hi Jenna_Fire,
According to your description, you have a matrix contains total for each group on each level. Now your requirement is, when you click on any number (data field or total), it will go to the detail report which returns all the detail information of the people
within the group scope. For example, if you click on the total of Active users in United States, it will return the detail information of Active users in New York and Texas. Right?
In this scenario, we should set the parameter (@Country, @State, @City) allow multiple values in both main and detail report. And in Default Value (@Country, @State, @City), query out all distinct values. In the textbox which contains
those total values, when set use these parameters to run the report, we only need to pass the parameters of parent groups. For example, if we click on the total of Active users in New York, we only need to pass Country, State, Status to detail report, and
in the detail report, the City parameter will use all distinct values (Default Values) because we don't pass the City parameter. We have tested this case with sample data in our local environment. Here are steps and screenshots for your reference:
1. Create parameter Country, State, City and Status in both main report and detail report. Set both Available Value and Default Value get values from query (Create a dataset for each parameter, use "select distinct [column] from [table]" as query). Set allow
multiple values for parameter Country, State and City in both reports.
2. In corresponding textbox, pass appropriate parameters in go to report Action.
4. Filter data in detail report (in where clause or using filters).
5. Save and preview. It looks like below:
Reference:
Using Parameters to Connect to Other Reports
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSRS 2008 Work order Report , when added item descriotion , somehow costgroup id is not working , donot know why, ( need help)

SSRS 2008 Production orders created report, when I added item description some how cost group id is not working ,
my costgroup id did not break into labor , only Mat Cost showed in the total,
my query is as below, did I link the wrong field,   I want to show Labor total also
can some one suggest what I did wrong .
any advise will be great
SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                         PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                         PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                         PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                         PRODCALCTRANS.LINENUM, INVENTTABLE.ITEMNAME, INVENTTABLE.ITEMID AS Expr1, PRODTABLE.INVENTTRANSID
FROM            PRODTABLE INNER JOIN
                         PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID INNER
JOIN
                         INVENTTABLE ON PRODCALCTRANS.DATAAREAID = INVENTTABLE.DATAAREAID AND PRODCALCTRANS.KEY1 = INVENTTABLE.ITEMID
WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                         (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate) AND (PRODCALCTRANS.COLLECTREFLEVEL
= 1) AND
                         (PRODCALCTRANS.CALCTYPE >= 0)

Hi Bitia,
As per my understanding, after you add Item field to the report, it does not calculate total of matl group, right? If that is the case, please refer to the following steps to troubleshoot the problem:
Modify the dataset used to retrieve data, delete the fields will not be used in the report.
Run the query in SQL Server Management Studio (SSMS) to make sure that there is data for matl cost group.
Make sure that row group and totals are correctly added.
In addition, do you want to add Finished date to page header? If that is the case, we can use ReportItem to achieve the goal. Please refer to the following steps:
In design surface, right-click the report and click Insert, then click Page Header.
Drag Text Box from Toolbox to page header.
Right-click inside of Text Box, then click Expression.
In the expression text box, type the code like below:
=ReportItems!FinishedDate.Value
If the problem remain unresolved, please provide the screenshot of the report in design view, the following screenshot is for your reference:
Reference:
ReportItems Collection References
Adding Grouping and Totals
Thanks,
Wendy Fu

Report created in SSRS 2008 is not able to upload in 2008 report server

I have created a report in SSRS 2008 version. Our reporting server is 2008 R2. I'm getting the error given below while uploading the .rdl file to report server.
The report definition is not valid. Details: The report definition has an invalid target namespace 'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' which cannot be upgraded.
Then I've checked the code of the solution and it is created in 2008. It is given below:
" Microsoft Visual Studio Solution File, Format Version 10.00 # Visual Studio 2008 ........."
Also, I've checked the code of .rdl file but that made me confused. It shows that the file is created in 2010.
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns:cl="http://schemas.microsoft.com/sqlserver/reporting/2010/01/componentdefinition" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
Visual studio 2010 is also installed in my system. Also, I have noticed that even if we try to open a report then by default it is showing data tools option.I have tried multiple times to create report in 2008. But, still the same result. Also, I could find
that ,the report will be in 2008 till the creation of data source. The report will be converted to 2010 after creating data set. I have been creating shared dataset and I was getting the above issue.Then I have tried by not creating a shared dataset and
directly creating dataset in the report data and it has been created as 2008 report. I was able to upload this report to report server 2008R2.
Can any of you help me to find why the report is created in 2010 while creating shared dataset?

I have created a report in SSRS 2008 version. Our reporting server is 2008 R2. .
xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
Hello Julie,
You mix up Version of Visual Studio, Reporting Services and Report Definition; all those products have Independent Version numbers and are not related to each other.
Important are the Versions of used SSRS and BIDS, the plugin for Visual Studio. By the Version of Report Definiton you have create a Report with BIDS 2008R2 or SSDT = SQL Server Data Tools; see
http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition/
Are you sure you have SSRS 2008 R2 (in post subject you wrote SSRS
2008)? If it's SSRS 2008 then you really can't deploy the Report to SSRS, you would have to use BIDS 2008 to create the report. Check the Version of SSRS or use "Report Builder 2.0", you can start it directly from "Report Manager"
URL.
Olaf Helper
[ Blog] [ Xing] [ MVP]

SSRS 2008 - hide chart lines based on parameter selected

How to control visibility of chart lines based on Params selected by user?
By default, my report display last 3 years worth of data (including current) with Month on the x axis and Counts on the y axis. I have two Boolean parameters:
TwoYrs? T/F
ThreeYrs? T/F
if False is selected for TwoYr and ThreeYr parameters then I want to hide chart lines corresponding to last year and the year before.
What I've tried: Created 3 Series groups with filters. eg. YearSeries1 to return only current year data and applying an expression to display it if params TwoYrs and ThreeYrs = False. and so on for YearSeries2 to return current + last
years data if param TwoYrs is True and ThreeYrs = False. But I don't see where to add expression to control the display of the individual series groups. I am open to any way of doing this, but this seemed most logical.

Hi Ok-Hee,
In your Source Query just need to filter the series data based on the Parameters.
I have written sample query below:-
select * from
select 1 monthnumber , 'Jan' MonthName, 2013 year,100 amount
union
select 1 monthnumber , 'Jan' MonthName, 2014 year ,200 amount
union
select 1 monthnumber , 'Jan' MonthName, 2015 year , 300 amount
union
select 2 monthnumber , 'Feb' MonthName, 2013 year, 300 amount
union
select 2 monthnumber , 'Feb' MonthName, 2014 year, 350 amount
union
select 2 monthnumber , 'Feb' MonthName, 2015 year,200 amount
union
select 3 monthnumber , 'Mar' MonthName, 2013 year, 380 amount
union
select 3 monthnumber , 'Mar' MonthName, 2014 year, 100 amount
union
select 3 monthnumber , 'Mar' MonthName, 2015 year, 500 amount
)t
where year in (
select distinct FilterYear from
select case when @TwoYrs=1 then year(getdate())-1 else year(getdate()) end FilterYear
union
select case when @TwoYrs=1 and @ThreeYrs =1 then year(getdate())-2 else year(getdate()) end FilterYear
union
select year(getdate()) FilterYear
) t
I have created one post in my blog , you can check the result.
https://msbitips.wordpress.com/2015/03/12/ssrs-2008-hide-chart-lines-based-on-parameter-selected/
Thanks
Prasad

Ssrs 2008 query question regarding in statement

I am no sql expert, so any help would be greatly appreciated. Thank you in advance. I want the user to enter in loan numbers they would like to reflect on a report in ssrs 2008. The loan number field is a text field.
My sql looks like this, and the user will enter in loan numbers like ( 0001,0002,0003) - comma separated. However, Visual studio does not like the format. I know it must be something simple, but I can't figure out the correct syntax.
select * from dbo.vwEscrowHistoryLoan
where Lnid in @LnID

allow multiple values will solve your problem first.
only follow below steps. if it doesnt solve your problem.
1.create the table valued function in your SSMS(managementstudio)
not in report vb code.
2.
DECLARE @LnID VARCHAR(MAX)='1,2,3,4'
select
* from dbo.vwEscrowHistoryLoan
where Lnid in (SELECT DATA FROM DBO.
F_Split(@LnID,','

Ordinal dates in SSRS 2008

Similar Messages

Maybe you are looking for