Org assignment
Hi Experts
I have a requirement to assign org unit to the User via position. We are already live with the data. A user is already assigned to a orgunit. I have to change the org assignment. As we do in PPOMA_BBP manually, is there any FM or BAPI where I can pass the user name & Org unit.
In PPAOM_BBP we delete the assigment of the orgunit to Position and agian assign a new orgunit to the position of the user.
I need a code which can do the same.
Quick response will be appreciated.
Many Thanks,
Prasad
Hi. I can't find a function module, but you can use transaction PP01 to move a position to a new org unit instead. Just maintain the "relationships" infotype.
You can then do a call transaction or use ECATT to mass maintain the data.
Regards,
Dave.
Similar Messages
-
Org.Assignment Infotype start date and End date is getting wrong.
Hi, When i create a new employee in PA40, in Org. Assignment infotype start date and end date is getting wrong. for eg. When i create an employee on 01.04.2014. In org. assignment infotype its getting like this. 01.01.2014 to 31.03.9999 and 01.04.9999 to 31.12.9999 Two date entries are creating by default.
Hi
Check in the Table - T588Z : Dynamic Actions ,is there any custom routines causing the defaulting dates functionality.
Thanks,
Sreeram -
Missing BP Userid from Org Assignment
Hi all,
Was wondering if this has happened to anyone else. We are using CRM 5.0 and R/3 4.7.
We are creating our employees in R/3 using PA30 and transferring BP's to CRM using PFAL P- for person, personnel number and update.
After we have assigned the employee to the org as a bp but loose the user id occasionally leaving the user without the ability to log in to the IC web Client. It just disappears from the BP and from the Org assignment.
Has this happened to anyone else?
MaggieThank you - we have resolved the issue this way.
You are correct in that when you transfer an employee from R/3 to CRM using PFAL you must consider the insert vs. update mode. An insert mode will delete all relationships to the org and update will not.
We also found that if the office in the org is not complete with a business partner assigned it will also contribute to the instability of the the position and employees assigned.
Lastly we modified table T77SO using SM31 and value HRALX PQUAL - X.
Doing all these things has kept our employees assigned to the org.
Maggie -
Regd. workflows and org. assignment
Hi,
Most of us would know PPOC and org. assignment used in workflows. What I want to know is, this org. assignments do they differ in the way they are built if we use SAP HR in our system. If so how do they differ, it is going to be the same PPOC isn't it.
Regards,
VijayHello,
In my opinion they do not differ. It are the same HR objects. So techinally there is no difference i think. -
HR/ORG Assignment Integration issue
Hello All,
Basically I am not HR consultant .wondering if we are missing sap standard configurations.
We are following below steps to over come this issue which is really not advisable.
1) We lock the transaction: PPOME
2) We import transport following transport.
Object list of request
Comment entry: Released
PDMK924635 20070714 122520 NATT
HRDSYS: Logical information object client-dep. table E
SEGR_PLOGIAAAAAAAAAAAAAAA___0VVV
SEKZ_ORGAAAAAAAAAAAAAAAAA___1VVV
HRDSYS: physical information object client-dep. table E
355DC851BE6F0973E10000009B38F850
355DC852BE6F0973E10000009B38F850
355DC97CBE6F0973E10000009B38F850
355DC97DBE6F0973E10000009B38F850
Table contents
T77S0
T77S0
220PLOGIORGA
T77ST
220EPLOGIORGA
3) User will change some entries in PA30 (not sure what entries).
4)Import Original configuration
Object list of request
Comment entry: Released
PDMK925883 20071115 133627 NATT
HRDSYS: Logical information object client-dep. table E
SEGR_PLOGIAAAAAAAAAAAAAAA___0VVV
SEKZ_ORGAAAAAAAAAAAAAAAAA___1VVV
HRDSYS: physical information object client-dep. table E
355DC851BE6F0973E10000009B38F850
355DC852BE6F0973E10000009B38F850
355DC97CBE6F0973E10000009B38F850
355DC97DBE6F0973E10000009B38F850
View maintenance: Data
V_T77S0SC
T77S0
220PLOGIORGA
T77ST
220EPLOGIORGA
5) Unlock PPOME
Please give some solution regarding this issue. I am happy to provide more details regarding this. I am not sure which details are really required for your investigation.
Thanks in advance .
Kind Regards
RajHi Dianna Perron ,
Thanks for your update, I think it is quite difficulty to check the config in the transport i am sorry for this .
I got full history of this issue.
- It was the issue with integration between HR and Org assignment.
1)
There was a requirement to make cost canter field a input field on HR master as this could be used by PD resources in reporting. This was achieved by switching off the integration between Organisational Management/HR via Transport config.
2)
By doing above could maintain the cost canter field with relevant cost centers for watch HR record in PA30.
3)
Users reported few errors (Error screen you can see attached Screen 1) that there was some issue how the integration between HR and Org assignment is behaving. This was sorted out and the integration between HR and Organisanol Management was activated by transport .by activating this (step 2 PA30) again Cost Canter field Greyed please find Screen 2)
4) Because of the above issue we are deactivating the config with one transport and then again activating one transport.
Please let me know if you want to check the configs kindly provide me SPRO Path the i will provide
Kind Regards
Raj -
Org Assignment of global employees in Compensation Management
I have a problem with Compensation Management but it also relates the Org Assignment of global employees
In Comp when I try to submit an employee using transaction HRCMP001, I have an error saying no org assignment exist on 01. 01 .2008.
The business scenario is as follows. EE is hired on 01012008 in UK for e.g. he gets terminated on 31.05.2008 and then gets re-hired in another country using the Global Employee Personnel actions on 01.06.2008. In this county, he becomes eligible to receive the increase but when I try to submit, the error comes up that no org assignment exist for 01.01.2008. I have changed the settings in T582A to u2018copy infotypeu2019, it tries to reference the previous org assign infotype from 01.01.2008(which is correct but the system rejects it and will only accept the new date of the new hire 01.06.2008) thereby not referencing the old org assignment in the new personnel number.? I tried the propose infotype option but it did not do anything. Does any one have any suggestions? Thanks ever so much for your anticipated help.You create the compensation packages using info type 0706. This info type has
Two subtypes; one for home country and one for host country
Check this link
http://help.sap.com/erp2005_ehp_04/helpdata/EN/32/79c73c0c52085be10000000a114084/content.htm -
Org.Assignment Error_0001
Respected Seniors,
Hope to get your valuable inputs on this issues
The issue is when i am going for hiring action through PA_40 till Org.Assignment system doesn't have any problem.
The moment i filling the data in the 0001screen and try to go to the next info type 0002 by saving the info type-0001 ,the system in place of going to 0002 screen it automatically takes me to the sap system login screen and i have to go to pa30 to maintain the info types.
Please help me out with this .
Thank you very much in advance.
Edited by: rajsaptechie on Nov 15, 2010 6:00 PMLooks like you have ALE distribution model set up to do cost center validation remotely (business object 'BUS6001', method 'CHECKACCOUNTASSIGNMENT'.
Ask your BASIS guys to check ALE distribution model to see if this is the case, or you can check table 'TBD06' to see if there exists an entry where BOBJTYPE = 'BUS6001' and METHOD = 'CHECKACCOUNTASSIGNMENT'. If there is one, i t means that cost center in IT0001 is checked remotely, and the RFC connection to the remote system either has an invalid id/pwd or doesn't have one set up yet (i.e. logon screen appears, and continue after you key in correct id/pwd) . -
Inforecord - plant and purch org. assignment
Hi Experts,
I would like to have some support / good ideas on following issue:
we have a plant assigned to purchasing organisation 1:1, and only one (standard) inforecord should exist plant / purch organisation related, because I based my calculation on the inforecord price (through calculation variant / valuation variant). But buyes, who are responsible to create the inforecords frequently make mistakes and create inforecord with no plant, only purch org assignment than make a new one with plant and purch org assignment, which sometimes gives us difficulties - especially on price handling during Po creation and calculation.
Could You, pls advise me, which is the easiest way to stop this kind of duplication, and also delete the only purch org. related inforecords - I want to have only the purch org. and plant related inforecords in future.
Thanks in advanceSAP made the customizing for this control a kind of hidden.
instead of putting it into the info record section in IMG, they have this in Conditions section.
OLME > Conditions > Define Condition Control at Plant Level.
here enter a minus for No plant-related conditions allowed
If conditions are not allowed at plant level, you may not create any purchasing info records or contract items relating specifically to the plant.
you can set a deleition indicator in ME15, and then archive the info record with SARA object MM_EINA -
Deleting Infotype 1 (Org Assignment)
Hi All,
I need to delte Infotype 1 (org assign.) for an emp for the period 01.05.2008.- 31.12.9999.
By mistake the payroll area entered is wrong.
Now the payroll is not running.
I m not able to delete the record as offcyle has already run.
I even tried Promotion and Orgn Reassignment.
I cant even delete the payroll results of offcycle run.
Plz give me the solution.Hi..
if u want to delete payroll results..
try PU01
then try
PU00
Edited by: Ramm on Jun 6, 2008 4:55 PM -
How to undo Org Assignment?
HI,
We would like to change the start date of ORG assignment in PA30, but when i tried to delete the assignment for a pertivcular period in PA30>goto>Overview> selected the entry.
but wsystem is showing an error," Organisational Assignment created via Organisational Management"
Please let me know where i can go delete the selected entry.
Thanks in Advance,
R.B.ParamshettyHi,
Copy the org. Assignment u want.
Change the start date.
This will help in resolving ur issue
Cheers -
Hi Everyone
I have a requirement to hide the organizational assignment field on the General Data IView on MSS. Is the there some sort of configuration that I can edit to hide this field?
Very kind regards.Hi Isabel,
Did you get your question answered yet? If not, you may want to follow-up with this blog at Hide MSS Org Assignment
I've encountered the same issue, so is Orlando Covault who posted the same question to Markus Klein today.
rgds,
Suat -
Regarding Org assignment record create/delete
Hi All,
I have created a postion and assigned a holder , as i have doen mistake in period creation i have deleated that position , and created a new postionand holder with correct period.
but in org assignment infoype 0001 these old and new record got saved.Is there any possibility to deleate thsi record.
RegardsHi
Do remember that whenever an OBJECT ID start date is wrong, try to correct it with the program. RE_RHBEGDA0. This will correct the start date of the OBJECT IDs.
I think, the new record is in 0001 - Organisational Assignment.
1) Try to delete the first record, then go to delete the wrong entry record.
2) Try to change the first record with the date of the wrong entry date, so that it will get delimited.
Regards
Team Member. -
Hi,
I am trying to create a record in infotype 15, and i am facing the follwing error
" No org. assignment data available for 01.11.2005 "
In the Diagnosis it says
" An Org.Assignment record (0001) does not exist for 01.11.2005. "
Can anyone please help me overcome this problem.Pl verify if an infotype 0001 record exists for this employee as on 01.11.2005. If there isn't one, create one before going ahead with 0015.
~Suresh -
Cost center assignment to Position not updated in IT0001 Org Assignment
Hello,
I have assigned Cost centers to all Positions (A011) in IT1001 through PP01 from 01/01/2011.
Now when I see IT0001 in PA30, most of the employees have the updated IT0001 with cost center from 01/01/2011. But few employees have multiple IT0001 records past 01/01/2011.
e.g. there are 2 records for IT0001 for particular employee.
1. from 02/01/2011 - 12/31/9999
2. from 01/01/2011 - 01/31/2011
For these employees, cost center is not updated in IT0001 Org Assignment. I tried running RHINT00 and RHINT30 reports but didn't help.
Please guide, which report tp run to solve this issue.
Thanks in advance.
MadhuMr.Fun,
for these employee rerun the action with the same date.
and chek.
some of the table entries are not projected perfectly.
If you rerun the action it will fills that if not the check the cost center assignment to the position done perfectly r not.
it is advised to assign cost center to the Org.Unit. instead of no. of positions.
system automatically considers for all the positions in that org.unit. -
Item Open Interface giving error for Org Assignment
We ran the MTL_SYSTEMS_ITEMS_INTERFACE & loaded all the items at master level.
We are having issues in setting at Org level. Cant figure out what the issue as only few records gets assigned & then garbage sets in for remaining records. An SR has been raised & the tech support representative was saying that UOM's are different at master & org levels. Never heard of this issue earlier. I have worked with UOM's different at Master/Org levels.
The UOM's are different at Master & Org Level and in some cases the UOM are different for different Orgs. Attribute Control for Primary/Sec UOM is at Org level. The UOM's belong to the same UOM Class. There are standard conversions defined for all these UOMs.
Any pointers for quick resolution ?Pl do not post duplicates - Item Open Interface giving error for Org Assignment
Maybe you are looking for
-
How can I get the Airplay to appear on my iPhone 4S and iPad 2?
I have an iPad 2 and an iPhone 4S, and I have never seen the Airplay button that should appear on each device. I have checked wifi and it seems to works fine for printer and e-readers. Also, I have updated to the latest OS version as of this week. Is
-
How to send email notifications to customers?
Hi All, We have a requirement to send 'Order Acknowledgement' email notification to customers when their order is booked. My question is how do you set up the workflow to pick up the email address of the customer. Any help is appreciated! Thanks
-
Has ANYONE managed to get OS2 working with WiFi and bridge?
I've scoured the forum, and tried everything - right now, its a cute, flat paperweight.
-
Hi Experts, I received one requirement to add a custom infotype in PTMW transaction to maintain data. I want to know is it possible to add a infotype in PTMW? if yes can anyone give me procedure for that? Thanks in advance.
-
New article: Exploring the WebLogic Integration 8.1 RDBMS Event Generator
Dev2Dev has just published an article that you may be interested in: Exploring the WebLogic Integration 8.1 RDBMS Event Generator http://dev2dev.bea.com/pub/a/2007/02/rdbms-event-generator.html If you'd like to write for Dev2Dev on a WebLogic Integra