Org chart link in Who's who
Hi,
Can anyone tell me where the config for the Org Chart service that is kicked of from who's who (ie when you've found someone you can then click the Org Chart link)
I can't find the service in the Homepage framework. And I can't find a link with the Who's who.
Thanks
J
The config (what little there is) is under the ESS ITS specific services settings....go to "Office"....there is all the "Who's Who" config....toward the end is "Determine Functions"...that has a "check box" for "Allow access to Organizationl Environment"....it does little more than making the "org chart" button visible/active in the Who's Who service. There is no other specific Org Chart config in ESS. In fact, the standard SAP Org Chart service is pretty bad, so I have always replaced it with a custom version (since just about everyone customizes the Who's Who service also). Hope this helps.
Similar Messages
-
Org Chart link not coming for the user
Hi
I am trying to configure the Org Chart by Nakisa. The connection to SAP has been established using Single Sign-on. I am able to log-on successfully as a user. But I only get the 'Preferences' link under Quick Start but not the 'Org Chart'. Any idea what could be the problem?
Regards
LincolnHi Luke
I will look in the authorization issue. Is the authorization object S_RFC enough or do we need anything else?
I am using "http://XXXorgchart1/OrgChart/default.aspx" as the link for logging in, where XXX is the company name. Is that what you meant by server name? I am not a technical person, so my understanding may not be correct.
Regards
Lincoln -
Entries in CDS.log file and Org Chart Link
Hello Gurus/Luke/Stephen:
I have a live SAP connection for Org Chart 3.0 (build 5.1.32.1) for Nakisa 2.0. I have correct entries in backend R/3 system and I have right entries in Nakisa (through Admin Console). I have also done HR-OCI configuration. Still I am not able to launch OrgChart - it gives following error "Cannot find the root of OrgChart. The OrgChart box may have been deleted or incorrectly specified". Please find following entries from CDS.log file from server:
( 10/20/2009 11:10 PM: ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation. {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts'
10/20/2009 11:11 PM: ERROR: Rfc_Read_Table : Source {Nakisa.SAP.Proxy}: Message {[SAPConnector.Open]: Password logon no longer possible - too many failed attempts}
10/20/2009 11:11 PM: ERROR: SAPRoleMapping_SAP.MapRoles() : Object reference not set to an instance of an object.
10/20/2009 11:11 PM: ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation. {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts')
I do have correct password, so I am not sure what is the issue. Please advise.
Thanks,
JhaHere are more errors from CDS.log file:
10/22/2009 12:47 AM: ERROR: SAPRoleMapping_SAP.MapRoles() : Object reference not set to an instance of an object.
10/22/2009 12:47 AM: ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation. {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts'
10/22/2009 12:48 AM: ERROR: ApplicationConfiguration : getListingDirectory : listing directory: ReportingDirectory does not exist.
10/22/2009 12:48 AM: ERROR: ApplicationConfiguration : getListingDirectory : listing directory: ReportingDirectory does not exist.
10/22/2009 12:48 AM: ERROR: ApplicationConfiguration : getListingDirectory : listing directory: DirectoryListing1 does not exist.
Thanks,
jha -
In Who's Who (web dynpro version for ERP2004), I want to display Organizational Unit in an employee's detail and I have customized the tables V_T7XSSSERRES and V_T7XSSSERSRV. However the link don't work. If I click on Org Chart link, a new blank page is opened and I don't see any information. This blank page have the following url:
"http://epdes6.rtve.int:50000/irj/servlet/prt/portal/prteventname/navigate/prtroot/pcd!3aportal_content!2fcom.rtve.ess.carpeta_rtve!2fcom.rtve.xss.carpeta_rtve_common!2fcom.rtve.xss.carpeta_rtve_mss!2fcom.rtve.xss.desktop_rtve_default!2fframeworkPages!2fcom.sap.portal.frameworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=&WebDynproNamespace=sap.com/ess~org&WebDynproApplication=Orgchart&DynamicParameter=sap.ess.org.pernr%3D13036077%26sap.xss.popup%3DX%26sap-wd-cltwndid%3DWID1222874619010%26sap-wd-tstamp%3D1222875709018%26sap-cssversion%3D6.0.15.0.0%26sap.xss.menuhdr%3DSAPDEFAULT%26sap.xss.menuargrp%3DZRTVEDEFAULTESS%26sap.xss.menuarea%3DZRTVE_EMPLOYEE_SEARCH%26sap.xss.menusrv%3DEMPLOYEE_ORGCHART_SERVICE&TarTitle=Orgchart"
Can someone point towards some documentation on how to implement this?
Thank you!The URL a bit more... readable:
"http://epdes6.rtve.int:50000/irj/servlet/prt/portal/prteventname/navigate/prtroot/pcd:portal_content/com.rtve.ess.carpeta_rtve/com.rtve.xss.carpeta_rtve_common/com.rtve.xss.carpeta_rtve_mss/com.rtve.xss.desktop_rtve_default/frameworkPages/com.sap.portal.frameworkpage/com.sap.portal.innerpage/com.sap.portal.contentarea?NavigationTarget=&WebDynproNamespace=sap.com/ess~org&WebDynproApplication=Orgchart&DynamicParameter=sap.ess.org.pernr=13036077&sap.xss.popup=X&sap-wd-cltwndid=WID1222874619010&sap-wd-tstamp=1222875709018&sap-cssversion=6.0.15.0.0&sap.xss.menuhdr=SAPDEFAULT&sap.xss.menuargrp=ZRTVEDEFAULTESS&sap.xss.menuarea=ZRTVE_EMPLOYEE_SEARCH&sap.xss.menusrv=EMPLOYEE_ORGCHART_SERVICE&TarTitle=Orgchart" -
Oraganizational Unit link in ESS Who's who
Hello,
We deployed standard ESS Business Package on Portal ...when I goto Employee Search -> Who's Who I specify a Last name and select the employee...after that i see an organizational Unit link ...but when I click on it ...I get the message as: " Page not found or not available"...
Any help would be highly appreciated.this is how we did
there is a property for Who is Who iview which is Application Parameter which we set that calls the org chart link by taking employee pernr as parameter
iview:
Application Parameter : orgcharturl="http://host:port/orgchart.asp";
in webdynpro application you need to get the application parameter and pass the pernr as a parameter.
String url = WDProtocolAdapter.getProtocolAdapter().getRequestObject().getParameter("orgcharturl")"?id="pernr;.
open external window and pass this url
so when we click on that link it will call the orgchart of that employee -
ESS Who's Who - remove link from Org Unit
In Who's Who (web dynpro version for ERP2004), I want to display Organizational Unit in an employee's detail. I do NOT however want the link to the org chart from this field to be available.
Is there a way to remove the link from the Organizational Unit field?
If not, then my issue is that the link does not work. I get the error "Service EMPLOYEE_ORGCHART_SERVICE does not exist" when I click on a link to the org chart from who's who. Can someone point towards some documentation on how to implement this?
Bottom line is that I either want to remove the link on Org Unit or make it work.
Has anyone had success with this?
Thank you!
Jeff KarlsSAP's response for getting the link to work:
17.08.2006 - 12:30:27 CET SAP Reply
Hi,
Please check the following in your customizing.
1.table V_T7XSSSERRES
Resource Key EMPLOYEE_ORGCHART_SERVICE
Directory Path sap.com/ess~org
Object Name Orgchart
Window Name Orgchart
2.table V_T7XSSSERSRV
Service Key EMPLOYEE_ORGCHART_SERVICE
Service Link Text Orgchart
Service Type Webdynpro Application
Link Resource EMPLOYEE_ORGCHART_SERVICE
3.
Please maintain the URL of PCD page as
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.ess.employee
/com.sap.pct.ess.roles/com.sap.pct.ess.employee_self_service/
com.sap.pct.ess.employee_self_service/
com.sap.pct.ess.area_employee_search/
com.sap.pct.ess.serv_employee_search
in the table V_T7XSSSERRES for the key EMPLOYEE_ORGCHART_SERVICE and trythe application again.
As for removing the link, that will require a modification to the Who's Who web dynpro. -
Org chart integration with Who's who
Hi All,
I am using ERP2004 SP10.
I am able to call org chart from who's who. but it opens in same window, so lose the result list when i exit from org chart. I want org chart to appear as pop up. How can i achieve this. I have already specified page/iview for org chart as "Open in new window" but this is not helping.
Any suggesstion will be great help.
regards,
SudhirHello Kristian,
I have done what you say in your answer to Sudhir about the 'Org chart integration with Who's who'. The error about: "Service EMPLOYEE_ORGCHART_SERVICE does not exist" is ok. However, when I click on the link to the org chart from who's who now, we obtain a new blank page. There aren't any information in this new page. The browser try open the next url:
"http://epdes6.rtve.int:50000/irj/servlet/prt/portal/prteventname/navigate/prtroot/pcd!3aportal_content!2fcom.rtve.ess.carpeta_rtve!2fcom.rtve.xss.carpeta_rtve_common!2fcom.rtve.xss.carpeta_rtve_mss!2fcom.rtve.xss.desktop_rtve_default!2fframeworkPages!2fcom.sap.portal.frameworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=&WebDynproNamespace=sap.com/ess~org&WebDynproApplication=Orgchart&DynamicParameter=sap.ess.org.pernr%3D13036077%26sap.xss.popup%3DX%26sap-wd-cltwndid%3DWID1222874619010%26sap-wd-tstamp%3D1222875709018%26sap-cssversion%3D6.0.15.0.0%26sap.xss.menuhdr%3DSAPDEFAULT%26sap.xss.menuargrp%3DZRTVEDEFAULTESS%26sap.xss.menuarea%3DZRTVE_EMPLOYEE_SEARCH%26sap.xss.menusrv%3DEMPLOYEE_ORGCHART_SERVICE&TarTitle=Orgchart"
Can you help me?
Thank you.
Ana. -
Error when accessing the "Org unit" link from iview "Who's who"
Hi all,
In our ESS/MSS implementation we have come across to a strange error:
In the master iview u201CWhou2019s whou201D when trying to access the link for the org unit we receive the following error:
Service EMPLOYEE_ORGCHART_SERVICE does not exist.
Indeed the respective service does not exists nor the resources. We have ECC 5.0 and EP 7.0. We were unable so far to find the right (or dedicated) resources/services for this.
Any helps are much appreciated.
Thanks,
EugenHi Eugen,
Probably these threads can help you.
Error "Service EMPLOYEE_ORGCHART_SERVICE does not exist." in ESS.
ESS Who's Who - remove link from Org Unit
Good Luck!
Sandeep Tudumu -
ESS Who's Who (ECC6, WD) - Error with telephone direct dial link
Hi there -
We are on ECC6, NW 2004s (SP14). I have the following field in our Who's Who 'Output field detail' -
SYHR_A_P0105_AF_TEL_NR - Area code + local access code
Also in config, I have the checkbox DESELECTED for 'Allow direct telephone dialing.'
Issue with Who's Who service:
The telephone number is displayed as a hyperlink. When I click the link, I get the following message: 'Search resulted more than 1500 records, Only first 1500 records is displayed.'
Then if I click the link again, I get a dump: 500 Internal Error,
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Specify a server name , error key: RFC_ERROR_SYSTEM_FAILURE
Does anyone know how to get rid of the link - direct dialing is not a requirement for my client. Also - the first error message makes no sense. Any help would be greatly appreciated - I am stumped.
Regards,
Karena quick note from a call we opened this week
...More significantly is that SAP_ESS is only one part of
the ESS ERP2005 product - if you look at the stack
schedule the next stack is due out Week 48 - last
week of November 2007... -
Link in the Who is Who iView for ITS Service
Dear All,
Can you please guide me where exactly i have to mention the link for the Service which i have to use from the ITS for the who is who iview?
I am getting the error as
No Service Name specified
Your request didnot contain service name. Please specify service name in the URL path
Example URL
http:
.....\scripts\wgate\pz01\!
I am not understanding where to specify the path exactly.
Regards,
SamirHello Samir,
Are you using standalone ITS.
If u are using itegrated ITS then mention the below parameter in ITS of ur portal system.
ITS HOST NAME: <host_name>:<port>
ITS PATH: /sap/bc/gui/sap/its/
ITS PROTOCAL: http
Regards
Deb -
Who is who link to user details
Hello,
I've a problem in ESS/Who is who. When choosing a user from list it doesn't display any detail of user. It returns to searching page.
Why I can't see the user details when choosing the link of user?
Thanks&RegardsIt may be a problem with Infosets
go to SPRO-personnel management-Employee self services-service specific settings-address book-who is who -Selection and output-select the infoset-check any values(fields) are there under the output fields detail .if not add the required fields
if helpful reward points -
ESS Who's Who removing Change Own Data Link
Hi,
Set-up ESS who's who with no issue on EP7 with ECC6. However I wish to remove the "Change Own Data" link from the page.
I have reviewed the IMG but cannot find where to change the details. Also I cannot find Personnel Management >> Employee Self Service, so I'm unsure if we have loaded up our business package correctly. ThanksHI Brian,
Do the following steps:
TCode: spro
SAP Reference Img
--Cross Application Components
--Home page Framework
--Services
--Assign serives to subAreas
--Execute - Choose (find entries) and mark the "EMPLOYEE_SEARCH_CHANGEOWNDATA" field Position as 0 (zero).
Log off and login portal and see the effect taken place.
Hope you can do it easily now..
If your problem gets solved, close the thread and confirm the same
Regards,
Mahesh.M.R -
How to get the opportunities linked to a BP who is logged in?
Hi,
How to get the opportunities linked to a BP who is logged in mean the user who is logged in?
Regards,
JayaHi,
I understand the question as follows:
You want to get a list of opportunities that are assigned to the logged in user.
You can get the USER -> BP assignment from table HRP1001.
Then use the standard opportunity search to get the Opportunities.
cheers Carsten -
Link to Who-is-who from XML Form item
How can I make a link from a user name to the user details of the who is who from a XML Form item? I see this functionality automatically in KM collection renderers but in the XML Form Builder I only see the option to link to the e-mail (Display name as E-mail link).
Thanks in advance.
Best regards,
EricEric,
adding a link to user details in a XMLForm item is not possible at the moment.
But this a reasonable request and maybe we can add this feature in one of the next SPs or release.
Regards, Roland -
Org Chart Search issue in Employee Listing in VSN30SP2
Hi,
Everything works fine in Org Chart in Nakisa OrgChart VSN30SP2.
But unfortunately when we searched an employee in employee listing we found it was not showing up.We used the search criteria Person Name Contains xxxxx.
In Search criteria when we entered say James it showed up all the employee who has the first name as James except one employee (The missing employee also has the first name as James).
Also without search criteria (unchecked on Start Directory Empty in Org Chart Employee Listing configuration) it is not showing only that employee.Also authorization is fine for that employee.
Can you please help on this issue.
Regards,
Xavier.Hi Xavier,
I had a similar problem in the OOTB build (0702019400SCA). Nakisa resolved the issue with a new build so if you are using this build I recommend that you go to this link and deploy the latest build: [3.0 SP2 - SAPmats links for latest builds;.
Let us know if this resolves the issue.
Best regards,
Luke
Maybe you are looking for
-
Safari will not open but shows in the menu bar -
We already checked with our Internet provider and that is all good. Our wireless is working. Safari will not reset and freezes up, in the menu all commands are greyed out except "Hide Safari" or I must force quit. We have ethernet on this computer
-
I have an iphone and an ipad. I DO NOT have an Apple Mac (I have a Dell laptop). I have an appointment with a Genius Bar. They tell you to back up your data to icloud before you come in. If my data is lost will I be able to retrieve it without an
-
Driver Power State Failure in Windows 8.1
hi , Can some one please help me for the given Error " Driver Power State Failure in Windows 8.1 Enterprise Edition. Earlier in my Laptop (HP envy j109 ) windows 8.1 single language edition was installed, i have just update this window with fresh ins
-
Solaris 9 NFS clients and Mac OS X 10.3.8 NFS Server issues
I have a situation where I'm using a Mac OS X Server machine as my file server for heterogeneous mix of clients, Solaris 9 being one of them. The NFS server portion of Mac OS X seems to have some quirks. I made the move to a Mac OS X server from a co
-
Hi , I am doing File to RFC Scenario. My file get picked and I able to view the audit log under RWB message monitoring. Here I am getting the error u201CTransmitting the message to endpoint dest://XI_INTEGRATION_SERVER using connection File_http://s