Org determination problem for an Opportunity created through CIC0.

Dear all,
I have a problem with org determination in an opportunity createde through CIC0. I initially created a BP, then a contact person for the same BP and then created an opportunity for the BP where in system is not picking up the Org Data.
The determination rule says that
if BP has sales area data --> present those sales areas
if BP has no sales area data --> pick up from the user assignement in the org structure.
Now case 2 should be applicable to me. I have maintianed a user as BP under Sales Org. I have activated obj permitted for determination at sales org level.
When I am creating opp from cic0, user is getting picked properly. However, org data is not getting picked.
The scenario works fine when opportunity is created through CRMD_ORDER
What is that I am missing out??? PLEASE HELP ME OUT...
Regards,
Rajesh

Dear Rajesh,
this might be caused by wrong partner determination customizing for CIC0. please check note 600116
and related. Also please check note 487734 regarding missing pop-ups in CIC0.
Regards, Gerhard

Similar Messages

Require TCode used by user for sap query created through SQ01

Hi All,
I have number of SAP Query in production that currently are used by different-2 user & created through SQ01
My question is how to know the TCode that used by user for SAP Query.
Thanks In Advance
Regards
San

Charlie
You did not get the question.
I knew the TCode of the query which I had created using tcode SQ01. user is using this query to see the report
Like I created query named 'order_line_details'. This query is basically to see the order & other details. To use this by user one TCode'zncv_ord_item' has been created.
So in the system lots of query are available. So i want to know the Tcode for those query that are using by user.
Thanks in advance
San

Problem for automatic reservation created for PM01 order in PM

Hi,
I have a problem. Generally from Maintenance Order type PM01 under Order Category 30, when we give some materials requirement, SAP automatically generate reservation for those materials and take the GL as Consumable Item (Actually it is determined from OBYC transaction with a combination of GBB (A/c Key) and VBR (A/c Modifier).
But in my case, that GL has to be changed depending on what perpose we are using the material. But Manual reservation is not allowed for the order category 30 and no GL can be changed for automatic reservation.
Can you suggest any way-out so that we can give our desired GL No. for the reservation for Maintenance order (say Order type PM01 under category 30 which is SAP internal).
Thanks in advance,
Satadal

Hi Friend!
Try exploring the sam while post the mat. document thro' MIGO using FI validations..OB28..
Let leave the PM reservation.
RAO

Account Determination Problem for Non valuated PO

Hi Friends,
I Have a Non Valuated Material.For that i have created a Purchase order for which the Account assignment Category is K-Costcenter.
At the time of GR i am getting Error in account detremination for Transcation Event Key KBS.
For a Non Valuated PO is it necessary to create a Accounting Document at the time of GR.
If So how to assign GL for KBS as account determination is not Possible for KBS in OBYC.
I have assigned the Link for Cost center and GL in OKB9 also.
Please advice how to solve this.
Tks/Rgds
Ganapathysubramanian.V

Hi,
Yes. it has to be in unchecked mode.i regret the same.
SAP Help wording 'Purchase order with account assignment (KBS)
You cannot assign this transaction/event key to an account. It means that the account assignment is adopted from the purchase order and is used for the purpose of determining the posting keys for the goods receipt.
http://help.sap.com/saphelp_46c/helpdata/en/90/7155967935d1118b3f0060b03ca329/frameset.htm
But however please refer to the below links.
Re: Account-assigned purchase order KBS is not activated
Regards,

Data not saved in the table (for the field created through AET)

Hi,
I have created few fields using AET for a transaction type.
The fields are created successfully and we are able to add them in my custom config.
I followed step by step the following link The New AET table Extension Feature of Ehp1- Creating your own components
However the values of these fields are not stored in the ZTable.
I had defined Form view ( 1:1 cardinality) within the wizard itself.
Help!!!
Regards
Omar BB

Hi,
Check whether your ZRelation Depenedent object entity is getting filled or not.....after input some values.....
Regards,
Sumeet

Problem in control file created through LKM File to Oracle (SQLLDR)

I have a fixed file ABC.txt & it has three fields/columns of length ,C1:= 4, C2 :=10 & C3:=6 & I have to use LKM File to Oracle (SQLLDR) to load data into oracle target table.
I recieved the following error at step CALL SQLLDR in the KM
"org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last):
File "<string>", line 3, in ?"
Then I checked the control file log & found that the position start value & end value was not defined in control file which is created automatically by LKM
SQL*Loader-350: Syntax error at line 14.
Expecting positive integer, found ":".
     C1_C1     POSITION(:), "
The control file created by ODI is & it's missing the position value.
OPTIONS (
     SKIP=0,
     ERRORS=0,
     DIRECT=FALSE
LOAD DATA
INFILE "C:/SNAPON/EOL.txt"
BADFILE "C:/SNAPON/ABC.bad"
DISCARDFILE "C:/SNAPON/ABC.dsc"
DISCARDMAX 1
INTO TABLE SNAPON_W.C$_0ABC
     C1_C1     POSITION(:),
     C2_C2     POSITION(:),
     C3_C3     POSITION(:)
Does any one know why the position value is not created in the control file .
Edited by: neeraj_singh on Mar 3, 2011 1:25 AM

Hi Neeraj,
It is happening because you have not selected the mapping execution area as STAGUING .
Open your interface , click on each and every column of your target datastore , make sure the "Execute On" is marked on "Staging Area".
Then run your interface.
Thanks,
Sutirtha

Approval Flow problem for the newly created user

Dear friends.
We have a new user .
The approval flow is not starting for her shopping carts.
I have checked YAM to see the cost centre but it is correct.
What could be the problem and how do i check the workflow.
I am not much into the technical side of SRM.

Hi,
You can use Tx BBP_PD with Shopping cart number, Alo you can view the workflow logs in swi1 or swi2_freq. Then you can check starting conditions
BR
Reward if helpful

Tables for Role Name created through Tcode pfcg

User would Input Role Name and to that what users are attach and what value they are authorized to u2026?? Is there function module to this..

Hi,
Use this table AGR_USERS Assignment of roles to users
or try this FMs
CNV_GET_USER_ROLE
ROLE_ANALYSE_FOR_USER
Regards,
Jyothi CH.

ISA sales order - org determination question

Hello All,
We have sales orders being created in CRM just fine using SAP GUI. The transaction type has a specific Org profile attached which has rule to determine the org unit, sales area, office, group based on sold to party's location.
Now for the same transaction type when the sales order is created from the WebShop it is not picking up the correct Org Determination profile(I think). The sales area comes out correctly but org unit, sales office, group are picked up incorrectly. The sales area is correct bcoz, may be the product catalog has the same sales area(Sales org/Dist Channel/division).
I am not sure what could be reason and if product catalog has any role to play on org determination profile for orders from WebShop? Is there any special configuration available for webshop specific org profile?
There is a difference of values org unit, sales office & group between orders created out of GUI vs WebShop. What could be the reason? Any suggestions are appreciated.
Thanks

Hi Sunil,
You have to login to Shop Admin Web application. It should be found on the same server from where you are accessing ISA B2B/B2C
http://<server>:<port>/shopadmin/shopadmin/init.do
Login with User who has shop administration authorization in backend system.
After login click on existing shop you will get list of webshops define then click on your web shop and go to Transaction tab and check your Sales ORg, Distribution Chln, Division value.
Also check customer profile in bcakend system. Are you using B2B or B2C?
Let us know if you have any question.
eCommerce Developer

Sales Org determination based on Employee responsible for Opportunity

Hi,
How can i do the sales org determination based on the Employee reponsible for opportunity. Currently it is happend on employee responsible but when i change the employee responsible the organization data is not getting changed.
Please help me in this regard.
Thanks
Naveen

Hi,
The sysytem wont accept ur procedure,
The system determines the process as
When u enter a prospect, the syetem determines the organisation based on attributes ,which in turn pick up the employee responsible from that particular organisation.
Hope ur solution is solved if so reward me.

Problem in Org determination rule

hi all,
i have postal codes assigned to the org model as attributes,(ie) the org unit is responsible for that postal code only, i have created org determination rule by selecting the postal code as an attribute, i have created bp in which i have mentioned one of the postal code which is in the org model,
when i run transaction i need only the org unit to be picked and shown based on the postal code mentioned in the BP , now it is showing all the orgunits which i dont need,
please suggest me what setting i have to do.
its urgent

Hi shalini,
while simulating the rule in pfac, i am able to get the correct org unit for the pincode, while running the transaction my problem is still the same getting all org units in the pop up, i am sure i have correct org rule assigned to org profile and profile to transaction.
to be clear, my requirement is, for a transaction type, i have defined prt functions "customer" and 'employee responsible' in UI interface setting of prt detr procedure. here the employee responsible should not be the user creating the transaction. this should be the org unit "sales group" which is having certain pincodes assigned in org model, the same value which is populated in sales group field should be populated in 'Emp responsilbe' field in UI of transaction type.
here my first problem is i am getting all the org units for the selection when running the transaction, where user doesnt know which org unit should be selected for the customer belonging to the particular pincode.
if i get value sales group field how can i get this value populated to Employee responsible field in UI
suggest me how can i achieve this.
ITS URGENT

Problem of BOM components uploading through BAPI,for the Network(CN01)

Hello,Friends,
Iam PP consultant and facing a problem of BOM components uploading through BAPI,for creating of the Network (CN21)
we have 300 components in the network activity and while uploading the BOM through BAPI , only 295 components has been uploaded.Others components has not uploaded.
Please suggest me what will be the Problem? and
What is the solution for the same?
Regards,
MYS

in customizing availability checked has been applied ,for this reason one additional screen is appearing in BAPI for all these components
How this screen could be by passed

Implement Org determination for Service Orders

Hello Freinds ,
My Client is implementing the service order with WebIC2005 with the following scenarios.
Service orders created Manually.
Service Orders created from completed sales order automatically.
Could any one possibly suggest the best practice of implementing org determination for the above scenarios.
Is it a correct practice to determine sales org for manual creation of Service Order.
For Automation process is it not correct have sales org determined from sales order.
How to determine Org Determination in WebIC service order Link?
Thanks & regards
Amar

Hi Amar,
You cant assign two diffrent org determination for same transaction type.
Its always better to determine the org at transaction type level. But wehn you are creating service order from sales order , you can set the rule in Copy control whether to copy the org or not.
Hope this helps.
Regards
Arun Kumar

No Ranges for Org Determination

Hi Gurus,
I have to configured Org Structure in CRM. There is no integration of CRM with ECC is required. Therefore i have defined simple Org Structure in CRM.
Now, i want to assign specific no ranges to my Org Units w/out any specific partner number. How i can customize it .
Please guide.

Dear Arden,
Thanks fr reply
i have configured and tested for Sales Organization Determination Successfully. But i hve following concerns in which i required guidance:
1. For Service Org Determination i use Service Org in Functional Tab and Partner No as Attributes. Even in Transaction Type Configuration i use Org.Profile Data which has created on Service Scenario. But when i am going to create particular Transactions it is automatically determine Service Org but given an error of Sales Org, DC and DIV determination. Why ?
2. How Marketing Org can be determined. Determination of Marketing org is necessary or not.
3. How Interaction Center can be cater into Org.Structure.
Thanks

Org determination for Service & Sales Organization

Gurus:
Here is my objective and steps I have performed so far. Pl. guide me with your 'pearls of knowledge & experience'..!!
Objective: To create Org determination profile so that when Campaign is released, prospective customer calls 1-800 number, based on the zipcode of the customer, an Appointment/Demonstration transaction is created and this transaction is routed to the Regional Sales/Service Office.
Configuration done:
1) Org structure with Regional Sales/Service is created. Do I have to create/assign 'zipcode' as attribute over here? If yes, do I just specify the Zipcode range for each office..? Do I select 'Object Permitted in determination'..?
2) Do I have to create new Org Determination profile or I can use an existing one, such as '00000001 - Std Org data profile-Sale', which uses '10000280' as Org Det Procedure? I checked 10000280 (REG_SERV_04) and it uses zipcode as reference. I suppose we do not change/config anything with this rule correct..?
Thanks in advance and full points for correct answer...
Cheers,
Niraj.

Dear Niraj,
I answer because I am interested in this topic. I will share what I know. When you set the flag "Object permitted for determination" the Organization is available for the transactions. So you must set this. Also, Zip code is maintained in the Attributes tab for the scenario that you choose. In your case, I think you choose Sales. This will help in the Orgnization data determination.
This is as far as I know. Watching this space with interest.
Regards,
Sowmiya

Org determination problem for an Opportunity created through CIC0.

Similar Messages

Maybe you are looking for