Org.eclipse.aether.deployment.DeploymentException for Upload to Nexus
I am trying to store some files/artificat by defining GAV co-ordinates to Nexus but keep getting
org.eclipse.aether.deployment.DeploymentException: Failed to deploy artifacts: Could not transfer artifact XYZ ????? from/to xxxx???? : Bad Request (400).
Few lines of code:
Artifact artifact = new DefaultArtifact("co.xxx.yyyy.zzz", "xzzz-client", "txt", "1.0.0-SNAPSHOT");
artifact = artifact.setFile(new File("file.txt"));
DeployRequest deployRequest = new DeployRequest();
deployRequest.addArtifact(artifact);
deployRequest.setRepository(repoBuilder);
system.deploy(session, deployRequest);
While I can download file using similiar coading technique.
This forum is about Sun application servers, you should ask this question on JBoss related forums.
Similar Messages
-
Org.jboss.deployment.DeploymentException: Verification of Enterprise Beans
hello;
i am using jdk 1.5 with eclipse-3.1 and myeclipse-4.0,my previous environment was jdk-1.4
with eclipse-3.0 and myeclipse-3.8 i developed ejb on old environment.
now if i make changes in ejb in new environment and deployed it on jboss it gives exception like below:
17:41:33,621 WARN [ServiceController] Ignoring request to stop nonexistent service: null
17:41:33,622 WARN [ServiceController] Ignoring request to destroy nonexistent service: null
17:41:33,622 WARN [ServiceController] Ignoring request to remove nonexistent service: null
17:41:36,391 WARN [EJBDeployer] Verify failed; continuing
java.lang.NoClassDefFoundError: com/ivrs/retail/entity/value/CInRateValue
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Class.java:2365)
at java.lang.Class.getDeclaredMethod(Class.java:1907)
at org.jboss.verifier.strategy.AbstractVerifier.hasFinalizer(AbstractVerifier.java:557)
at org.jboss.verifier.strategy.EJBVerifier20.verifyCMPEntityBean(EJBVerifier20.java:1682)
at org.jboss.verifier.strategy.EJBVerifier20.checkBmpOrCmp2Entity(EJBVerifier20.java:139)
at org.jboss.verifier.strategy.EJBVerifier20.checkEntity(EJBVerifier20.java:109)
at org.jboss.verifier.BeanVerifier.verify(BeanVerifier.java:161)
at org.jboss.ejb.EJBDeployer.create(EJBDeployer.java:537)
at org.jboss.deployment.MainDeployer.create(MainDeployer.java:918)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:774)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:738)
at sun.reflect.GeneratedMethodAccessor48.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:121)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:127)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:644)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
at $Proxy8.deploy(Unknown Source)
at org.jboss.deployment.scanner.URLDeploymentScanner.deploy(URLDeploymentScanner.java:325)
at org.jboss.deployment.scanner.URLDeploymentScanner.scan(URLDeploymentScanner.java:483)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.doScan(AbstractDeploymentScanner.java:204)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.loop(AbstractDeploymentScanner.java:215)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.run(AbstractDeploymentScanner.java:194)
17:41:36,395 ERROR [MainDeployer] could not create deployment: file:/home/sumeet/jboss/jboss-4.0.2/server/default/deploy/ivrsretailnewejb.jar/
org.jboss.deployment.DeploymentException: Verification of Enterprise Beans failed, see above for error messages.
at org.jboss.ejb.EJBDeployer.create(EJBDeployer.java:553)
at org.jboss.deployment.MainDeployer.create(MainDeployer.java:918)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:774)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:738)
at sun.reflect.GeneratedMethodAccessor48.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:121)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:127)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:644)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
at $Proxy8.deploy(Unknown Source)
at org.jboss.deployment.scanner.URLDeploymentScanner.deploy(URLDeploymentScanner.java:325)
at org.jboss.deployment.scanner.URLDeploymentScanner.scan(URLDeploymentScanner.java:483)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.doScan(AbstractDeploymentScanner.java:204)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.loop(AbstractDeploymentScanner.java:215)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.run(AbstractDeploymentScanner.java:194)
while on old environment it deployed successfully..
can anyone help me.This forum is about Sun application servers, you should ask this question on JBoss related forums.
-
Org.eclipse.virgo.util.io.FatalIOException when deploying to local server
Hi,
i get the following error a lot when deploying an app to a local test server. (Neo SDK 2.3.1)
[2013-03-15 10:37:04.439] fs-watcher <DE0017E> Failed to update web bundle 'shall-we' version '0.0.0'. See the logs for more information. org.eclipse.virgo.util.io.FatalIOException: Content of destination path '.\webapps\shall-we' cannot be removed
at org.eclipse.virgo.util.io.ZipUtils.determineFinalUnzipDestination(ZipUtils.java:243)
at org.eclipse.virgo.util.io.ZipUtils.unzipToFolder(ZipUtils.java:159)
at org.eclipse.virgo.util.io.ZipUtils.unzipToDestructive(ZipUtils.java:81)
at org.eclipse.virgo.util.io.JarUtils.unpackToDestructive(JarUtils.java:58)
at org.eclipse.virgo.web.war.deployer.WARDeployer.update(WARDeployer.java:352)
at org.eclipse.virgo.nano.deployer.internal.StandardApplicationDeployer.deploy(StandardApplicationDeployer.java:98)
at org.eclipse.virgo.nano.deployer.internal.StandardApplicationDeployer.deploy(StandardApplicationDeployer.java:191)
at org.eclipse.virgo.nano.deployer.hot.HotDeploymentFileSystemListener.deploy(HotDeployerFileSystemListener.java:225)
at org.eclipse.virgo.nano.deployer.hot.HotDeploymentFileSystemListener.onChange(HotDeployerFileSystemListener.java:82)
at org.eclipse.virgo.util.io.FileSystemChecker.notifyListeners(FileSystemChecker.java:373)
at org.eclipse.virgo.util.io.FileSystemChecker.check(FileSystemChecker.java:282)
at org.eclipse.virgo.nano.deployer.hot.WatchTask.run(WatchTask.java:48)
at java.lang.Thread.run(Thread.java:722)
My current workaround is to restart the server. However this is really annoying.... Is this a known issue?
Best regards,
FabianHi Vlado,
thanks for your support.
From a first test it looks like this new version solves the problem along with JDK7
Just let me add, for those using maven, in order to exclude jaxb-impl from deployment, you just need to add the following dependency to you pom.xml
<dependency>
<groupId>com.sun.xml.bind</groupId>
<artifactId>jaxb-impl</artifactId>
<version>2.2.6</version>
<scope>provided</scope>
</dependency>
This will tell maven to not bundle jaxb-impl into the lib folder as it's offered by JDK7
Of course you have JAVA_HOME set to JDK7 home so that the local cloud server picks up the JDK7 libs
Thanks a lot
Vincenzo -
Org.jboss.deployment.DeploymentException
Hi,
I need help when i am staring a Shell File its throwing with Error as:
Failed to boot JBoss:
org.jboss.deployment.DeploymentException: url file:/oracle/product/conf/jboss-service.xml
I installed the JBOSS and included in the .bash_profile in the path as:
export JBOSS_HOME=/oracle/jboss-4.2.3.GA
Any help will be needful for me
Thanks and RegardsHi:
This forum is for question related to the JVM running inside the Oracle Database.
Best regards, Marcelo. -
Org.jboss.deployment.DeploymentException: url running JBOSS
Hi,
I need help when i am staring a Shell File its throwing with Error as:
Failed to boot JBoss:
org.jboss.deployment.DeploymentException: url file:/oracle/product/conf/jboss-service.xml
I installed the JBOSS and included in the .bash_profile in the path as:
export JBOSS_HOME=/oracle/jboss-4.2.3.GA
Any help will be needful for me
Thanks and RegardsAgain ... the name of this forum is "Database - General" not JBOSS.
Possibly the problem you are having with JBOSS has a similar root cause to posting your questions in this forum: Read with care. -
JPA Error "No Persistence provider for EntityManager",using org.eclipse.per
Hello Colleagues,
I have created JPA project, with out any error have done mapping also. with orm.xml and persistense .xml
I am getting No Persistence provider for EntityManager error when calling Entity Manager in Entity class
Error >>> EntityManagerFactory emf = Persistence.createEntityManagerFactory("Personalization_JPA");
{ No Persistence provider for EntityManager named Personalization_JPA }
Persistence Provider as "org.eclipse.persistence.jpa.PersistenceProvider
In persistence.xml for my JPA project , I have included following in respective tabs
1) GENERAL Tab of Persistence.xml
a) Persistence Provider as "org.eclipse.persistence.jpa.PersistenceProvider"
b) In Managed classes included my Entity class and test application that calls the entity manager
c) orm.xml in xml mapping files
2) Connections Tab of Persistence.xml
a) Transaction Type as Resource Local, not using any JTA datasourse name in database field
3) Properties Tab of Persistence.xml
property name="driver" value="com.sap.dbtech.jdbc.DriverSapDB"
property name="url" value="jdbc:sapdb://localhost/w15"
property name="username" value="SAPW15DB"
property name="password" value="sapsapr3"
If anything wrong is specified please kindly inform me.Hello colleague,
As per your suggestion I removed Persistence Provider as "org.eclipse.persistence.jpa.PersistenceProvider", made it blank in persistence.xml, but still I get the same error saying No Persistence provider for EntityManager, please have a look at other attributes of persistence.xml
In persistence.xml for my JPA project , I have included following in respective tabs
1) GENERAL Tab of Persistence.xml
a) Persistence Provider as blank or "org.eclipse.persistence.jpa.PersistenceProvider" makes no difference
b) In Managed classes included my Entity class and test application that calls the entity manager
c) orm.xml in xml mapping files
2) Connections Tab of Persistence.xml
a) Transaction Type as Resource Local, not using any JTA datasourse name in database field
3) Properties Tab of Persistence.xml (connecting to maxdb, so is this necessary or not )
property name="driver" value="com.sap.dbtech.jdbc.DriverSapDB"
property name="url" value="jdbc:sapdb://localhost/w15"
property name="username" value="SAPW15DB"
property name="password" value="sapsapr3"
If anything wrong is specified please kindly inform me. -
"NoSuchMethodError" "org.eclipse.wst.server.core.internal.Trace.trace"?
Hello,
I'm encountering the following when publishing to WebLogic Server via Eclipse with the Enterprise Pack installed. Thanks for any help!
!ENTRY org.eclipse.core.jobs 4 2 2011-05-23 09:11:52.563
!MESSAGE An internal error occurred during: "Publishing to Oracle WebLogic Server 11gR1 PatchSet 4 at localhost [voodoo]...".
!STACK 0
java.lang.NoSuchMethodError: org.eclipse.wst.server.core.internal.Trace.trace(ILjava/lang/String;)V
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishOnce(WeblogicServerBehaviour.java:647)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publish(WeblogicServerBehaviour.java:531)
at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publish(ServerBehaviourDelegate.java:775)
at org.eclipse.wst.server.core.internal.Server.publishImpl(Server.java:3046)
at org.eclipse.wst.server.core.internal.Server$PublishJob.run(Server.java:341)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
This excerpt is from the Eclipse log.
It's interesting to note that I have no applications deployed to this domain - The result is the same if I attempt to add a simple test application.
I've used this on my Windows XP workstation for some time. This is my first attempt on my Mac!
Mac OS X 10.6.7
Java 1.6.0_24
Eclipse Helios SR2
"Fresh" installations of Eclipse and WebLogic
The latest Eclipse & Oracle Enterprise pack updates
WebLogic starts normally via the shellHi,
I was able to reproduce the issue you are seeing. This issue is caused by the fact that there is a new version of org.eclipse.wst.server.core_1.1.207.v20110401_1511.jar which is newer than the version which was shipped with Eclipse JEE SR2 bundle.
The Helios JEE SR2 installers at http://eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/heliossr2 contain the following version org.eclipse.wst.server.core_1.1.206.v20110110_p001.jar.
In your case when you tried with Helios GA and the OEPE update site , I presume you had the "Contact all update site during install to find required software" checked which updated your eclipse installation with the latest 207 version.
There are a couple of options to workaround this issue:
1) download and install all-in-one OEPE kits from http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/oepe-111172-360027.html
2) install eclipse JEE SR2 and install OEPE from the following update site http://download.oracle.com/otn_software/oepe/helios but make sure that the "Contact all update site during install to find required software" option is unchecked.
hope this helps. Please confirm if this resolves the issue.
thanks
Raj
Edited by: Raj Alagumalai on May 25, 2011 3:41 PM -
Could not deploy policy for resource: type= url , application=MySecurex,
Hi
My situation :
I have 2 managed weblogic portal 10.3.0 managed servers in a cluster and 1 admin server. All are running as a service.
Deployments of new versions of applications are submitted by an automated script.
The steps in the script are :
- stop the services of the managed servers
- undeploy the previous version by using ant task
<target name="undeploy_old" description="undeploy old application" depends="downloadFiles">
<java classname="weblogic.Deployer" output="./temp/${buildProject}_${deployEnv}/${buildVersion}/undeploy.txt" fork="yes">
<arg value="-adminurl" /> <arg value="${adminurl}" />
<arg value="-username" /> <arg value="${weblogic_user}" />
<arg value="-password" /> <arg value="${weblogic_pwd}" />
<arg value="-undeploy" />
<arg value="-name" />
<arg value="${buildProject}" />
<arg value="-verbose" />
<classpath refid="project.class.path"/>
</java> - deploy the new version by using ant task
<java classname="weblogic.Deployer"
output="./temp/${buildProject}_${deployEnv}/${buildVersion}/deploy.txt"
fork="yes"
maxmemory="512m"
inputstring="" >
<arg value="-adminurl" /> <arg value="${adminurl}" />
<arg value="-username" /> <arg value="${weblogic_user}" />
<arg value="-password" /> <arg value="${weblogic_pwd}" />
<arg value="-stage" />
<arg value="-verbose" />
<arg value="-upload" />
<arg value="-deploy" />
<arg value="-name" /> <arg value="${buildProject}" />
<arg value="-source" /> <arg value="./temp/${buildProject}_${deployEnv}/${buildVersion}/${buildProject}.ear" />
<arg value="-targets" /> <arg value="${deploytargetinstances}" />
<classpath refid="project.class.path"/>
</java>- start the services of the managed servers
Problem:
When the managed servers are restarting and the new version is going to prepared status, an error occurs for the new version of the application :
####<27-dec-2011 13.42 u. CET> <Info> <Deployer> <S40BEAPORTACC1> <s40beaportacc1p9106> <[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1324989758076> <BEA-149059> <Module MySecurexEarAdmin of application MySecurex is transitioning from STATE_NEW to STATE_PREPARED on server s40beaportacc1p9106.>
####<27-dec-2011 13.42 u. CET> <Error> <Security> <S40BEAPORTACC1> <s40beaportacc1p9106> <[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1324989758779> <BEA-090064> <The DeployableAuthorizer "myrealm_weblogic.security.providers.xacml.authorization.XACMLAuthorizationProviderImpl" returned an error: weblogic.security.spi.ResourceCreationException: [Security:090310]Failed to create resource.>
####<27-dec-2011 13.42 u. CET> <Error> <HTTP> <S40BEAPORTACC1> <s40beaportacc1p9106> <[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1324989758779> <BEA-101199> <Could not deploy policy for resource: type=<url>, application=MySecurex, contextPath=/MySecurexEarAdmin, uri=/campaigns/emails/*.
weblogic.security.service.ResourceCreationException: weblogic.security.spi.ResourceCreationException: [Security:090310]Failed to create resource
at com.bea.common.security.internal.service.PolicyDeploymentServiceImpl$DeploymentHandlerImpl.deployPolicy(PolicyDeploymentServiceImpl.java:173)
at weblogic.security.service.WLSPolicyDeploymentServiceWrapper$DeploymentHandlerImpl.deployPolicy(Unknown Source)
at weblogic.security.service.AuthorizationManager$HandlerAdaptor.deployPolicy(Unknown Source)
at weblogic.security.service.AuthorizationManager.deployPolicy(Unknown Source)
at weblogic.servlet.security.internal.ResourceConstraint.deploy(ResourceConstraint.java:108)
at weblogic.servlet.security.internal.WebAppSecurityWLS.deployPolicies(WebAppSecurityWLS.java:253)
at weblogic.servlet.security.internal.WebAppSecurity.registerSecurityConstraints(WebAppSecurity.java:140)
at weblogic.servlet.internal.WebAppServletContext.prepareFromDescriptors(WebAppServletContext.java:1189)
at weblogic.servlet.internal.WebAppServletContext.prepare(WebAppServletContext.java:1121)
at weblogic.servlet.internal.HttpServer.doPostContextInit(HttpServer.java:449)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:424)
at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:910)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:364)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
weblogic.security.spi.ResourceCreationException: [Security:090310]Failed to create resource
at weblogic.security.providers.xacml.DeployableAuthorizationProviderV2Helper.deployPolicy(DeployableAuthorizationProviderV2Helper.java:119)
at weblogic.security.providers.xacml.DeployableAuthorizationProviderV2Helper.deployPolicy(DeployableAuthorizationProviderV2Helper.java:162)
at weblogic.security.providers.xacml.authorization.XACMLAuthorizationProviderImpl.deployPolicy(XACMLAuthorizationProviderImpl.java:281)
weblogic.management.utils.CreateException:
at com.bea.security.providers.xacml.entitlement.PolicyManager.setPolicy(PolicyManager.java:241)
at com.bea.security.providers.xacml.entitlement.PolicyManager.setPolicy(PolicyManager.java:165)
at weblogic.security.providers.xacml.DeployableAuthorizationProviderV2Helper.deployPolicy(DeployableAuthorizationProviderV2Helper.java:112)
com.bea.security.xacml.PolicyStoreException: <openjpa-1.1.0-r422266:657916 fatal store error> kodo.jdo.FatalDataStoreException: The transaction has been rolled back. See the nested exceptions for details on the errors that occurred.
at com.bea.security.providers.xacml.store.BasePolicyStore.setPolicy(BasePolicyStore.java:684)
at com.bea.security.providers.xacml.store.BasePolicyStore.setPolicy(BasePolicyStore.java:576)
at com.bea.security.providers.xacml.entitlement.PolicyManager.setPolicy(PolicyManager.java:222)
at com.bea.security.providers.xacml.entitlement.PolicyManager.setPolicy(PolicyManager.java:165)
<openjpa-1.1.0-r422266:657916 nonfatal store error> kodo.jdo.ObjectNotFoundException: The instance "netscape.ldap.LDAPException: error result (32)" does not exist in the data store.
FailedObject: netscape.ldap.LDAPException: error result (32)
at com.bea.common.ldap.LDAPStoreManager.flush(LDAPStoreManager.java:370)
at org.apache.openjpa.abstractstore.AbstractStoreManager.flush(AbstractStoreManager.java:277)
at org.apache.openjpa.kernel.DelegatingStoreManager.flush(DelegatingStoreManager.java:130)
at org.apache.openjpa.datacache.DataCacheStoreManager.flush(DataCacheStoreManager.java:554)
at org.apache.openjpa.kernel.DelegatingStoreManager.flush(DelegatingStoreManager.java:130)
at org.apache.openjpa.kernel.BrokerImpl.flush(BrokerImpl.java:2007)
....>
My workaround:
Delete the <domain>\servers\s40beaportacc1p9106\data\ldap directory on the managed servers and restart
Does anyone knows what causes the error and how to solve it?
The goal is to be able to deploy our application by automation.You must use not the original bean that you coded. You must use the bean generated by axis-wsdl2java.
The bean generated by axis-wsdl2java is:
- in the first beanMapping: MSPCSService.SMSMO
- in the second beanMapping: MSPCSService.SMSMOResponse
As you can see, the bean the axis-wsdl2java will generate is build with the namespace + "." + qname. If you use an domain like java.sun.com in namespace, then the package name you will use is inverted (in the sample, com.sun.java). Look at the code generated.
You client must use this beans, not the original coded by you.
This must work, worked for me :) -
Weblogic Eclipse JAR Deployment Issue
Hi,
We're deploying from Eclipse project directly to Oracle Weblogic Server v10.3 via WLS Adapter.
Result*
NoClassDefFound exceptions for JARs included via Maven Dependencies (in "Project > Properties > Java EE Module Dependencies") errors in Weblogic AdminServer.log.
Cause*
JARs that should be accessible under /WEB-INF/lib do not appear to be getting deployed properly.
Environment*
Oracle Weblogic Server Support 1.0.0.20080808135653 from OEPE 1.0 on Eclipse Web Tools Project (WTP) 3.0.2 & Eclipse J2EE Ganymede SR1.
Temporary Workaround
We have to copy all the generated jar files manually from the generated target lib directory (e.g. D:\xx\xx-src\xx-web\target\xx-web-0.0.1-A-SNAPSHOT\WEB-INF\lib) to the source WEB-INF/lib directory (e.g. D:\xx\xx-src\xx-web\src\main\webapp\WEB-INF\lib)
There is this bug CR305233 appeared in Workshop for Weblogic, but we can't find any references to a resolution of bug CR305233 in later Workshop for Weblogic versions, and can't locate release notes for OEPE 1.0. (Unfortunately the BEA bugzilla site seems to have disappeared).
Have you got any idea to solve this problem?
ThanksHi! I'm experiencing the same problem with both jars and dependent projects.
My enviroment is composed of Weblogic Server Support 1.0.0.20080808135653 from OEPE 1.0 & Eclipse J2EE Ganymede SR2 & Weblogic 8.1.
The contents of my project files are:
.project
<?xml version="1.0" encoding="UTF-8"?>
<projectDescription>
<name>MetasSemanales</name>
<comment></comment>
<projects>
<project>MarcoFVG</project>
</projects>
<buildSpec>
<buildCommand>
<name>org.eclipse.wst.jsdt.core.javascriptValidator</name>
<arguments>
</arguments>
</buildCommand>
<buildCommand>
<name>org.eclipse.jdt.core.javabuilder</name>
<arguments>
</arguments>
</buildCommand>
<buildCommand>
<name>org.eclipse.wst.common.project.facet.core.builder</name>
<arguments>
</arguments>
</buildCommand>
<buildCommand>
<name>org.eclipse.wst.validation.validationbuilder</name>
<arguments>
</arguments>
</buildCommand>
</buildSpec>
<natures>
<nature>org.eclipse.jem.workbench.JavaEMFNature</nature>
<nature>org.eclipse.wst.common.modulecore.ModuleCoreNature</nature>
<nature>org.eclipse.wst.common.project.facet.core.nature</nature>
<nature>org.eclipse.jdt.core.javanature</nature>
<nature>org.eclipse.wst.jsdt.core.jsNature</nature>
</natures>
</projectDescription>
.classpath
<?xml version="1.0" encoding="UTF-8"?>
<classpath>
<classpathentry kind="src" path="src"/>
<classpathentry combineaccessrules="false" exported="true" kind="src" path="/MarcoFVG"/>
<classpathentry kind="con" path="org.eclipse.jdt.launching.JRE_CONTAINER/org.eclipse.jdt.internal.debug.ui.launcher.StandardVMType/jrockit81sp3_142_04"/>
<classpathentry kind="con" path="org.eclipse.jst.server.core.container/org.eclipse.jst.server.generic.runtimeTarget/BEA WebLogic Server v8.1"/>
<classpathentry kind="con" path="org.eclipse.jst.j2ee.internal.web.container"/>
<classpathentry kind="con" path="org.eclipse.jst.j2ee.internal.module.container"/>
<classpathentry exported="true" kind="con" path="org.eclipse.jdt.USER_LIBRARY/FiltroSeguridad">
<attributes>
<attribute name="org.eclipse.jst.component.dependency" value="/WEB-INF/lib"/>
</attributes>
</classpathentry>
<classpathentry exported="true" kind="con" path="org.eclipse.jdt.USER_LIBRARY/JasperReports">
<attributes>
<attribute name="org.eclipse.jst.component.dependency" value="/WEB-INF/lib"/>
</attributes>
</classpathentry>
<classpathentry exported="true" kind="con" path="org.eclipse.jdt.USER_LIBRARY/log4j">
<attributes>
<attribute name="org.eclipse.jst.component.dependency" value="/WEB-INF/lib"/>
</attributes>
</classpathentry>
<classpathentry kind="output" path="build/classes"/>
</classpath>
.settings/org.eclipse.wst.common.component
<?xml version="1.0" encoding="UTF-8"?>
<project-modules id="moduleCoreId" project-version="1.5.0">
<wb-module deploy-name="MetasSemanales">
<wb-resource deploy-path="/" source-path="/MetasSemanales"/>
<wb-resource deploy-path="/WEB-INF/classes" source-path="/src"/>
<dependent-module archiveName="MarcoFVG.jar" deploy-path="/WEB-INF/lib" handle="module:/resource/MarcoFVG/MarcoFVG">
<dependency-type>uses</dependency-type>
</dependent-module>
<property name="context-root" value="MetasSemanales"/>
<property name="java-output-path"/>
</wb-module>
</project-modules>
.settings/org.eclipse.wst.common.project.facet.core.xml
<?xml version="1.0" encoding="UTF-8"?>
<faceted-project>
<runtime name="BEA WebLogic Server v8.1"/>
<fixed facet="jst.web"/>
<fixed facet="jst.java"/>
<installed facet="jst.java" version="1.4"/>
<installed facet="jst.web" version="2.3"/>
</faceted-project>
Thanks
Edited by: user5830067 on 13/04/2009 10:20 AM
Edited by: user5830067 on 13/04/2009 10:21 AM -
Search replace Word doc - Getting Erro : org.eclipse.swt.SWTException:
Hi
All
I'm runing this Java class by a jsp to Search and Replace and saveAs a word document, when run the fisrt time it works OK, but if I run again I got this error:
What is happing there?
Following the Error and Source Java.
Thanks
11:59:49,234 ERROR [[jsp]] Servlet.service() for servlet jsp threw exception
org.eclipse.swt.SWTException: Invalid thread access
at org.eclipse.swt.SWT.error(SWT.java:3563)
at org.eclipse.swt.SWT.error(SWT.java:3481)
at org.eclipse.swt.SWT.error(SWT.java:3452)
at org.eclipse.swt.widgets.Widget.error(Widget.java:432)
at org.eclipse.swt.widgets.Shell.<init>(Shell.java:274)
at org.eclipse.swt.widgets.Shell.<init>(Shell.java:265)
at org.eclipse.swt.widgets.Shell.<init>(Shell.java:218)
at org.eclipse.swt.widgets.Shell.<init>(Shell.java:156)
at br.com.tryblob.view.WordSearchReplace.<init>(WordSearchReplace.java:36)
at org.apache.jsp.replacedoc_jsp._jspService(replacedoc_jsp.java:48)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:175)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:74)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Unknown Source)
12:00:56,843 ERROR [[jsp]] Servlet.service() for servlet jsp threw exception
org.eclipse.swt.SWTException: Invalid thread access
at org.eclipse.swt.SWT.error(SWT.java:3563)
at org.eclipse.swt.SWT.error(SWT.java:3481)
at org.eclipse.swt.SWT.error(SWT.java:3452)
at org.eclipse.swt.widgets.Widget.error(Widget.java:432)
at org.eclipse.swt.widgets.Shell.<init>(Shell.java:274)
at org.eclipse.swt.widgets.Shell.<init>(Shell.java:265)
at org.eclipse.swt.widgets.Shell.<init>(Shell.java:218)
at org.eclipse.swt.widgets.Shell.<init>(Shell.java:156)
at br.com.tryblob.view.WordSearchReplace.<init>(WordSearchReplace.java:36)
at org.apache.jsp.replacedoc_jsp._jspService(replacedoc_jsp.java:48)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:175)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:74)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Unknown Source)
==================JAVA CLASS=====================
import org.eclipse.swt.SWT;
import org.eclipse.swt.SWTException;
import org.eclipse.swt.internal.ole.win32.TYPEATTR;
import org.eclipse.swt.ole.win32.OLE;
import org.eclipse.swt.ole.win32.OleAutomation;
import org.eclipse.swt.ole.win32.OleClientSite;
import org.eclipse.swt.ole.win32.OleFrame;
import org.eclipse.swt.ole.win32.OleFunctionDescription;
import org.eclipse.swt.ole.win32.OlePropertyDescription;
import org.eclipse.swt.ole.win32.OleParameterDescription;
import org.eclipse.swt.widgets.Shell;
import org.eclipse.swt.ole.win32.Variant;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileWriter;
import java.io.BufferedWriter;
import java.io.IOException;
public class WordSearchReplace {
private static final String PROG_ID = "Word.Application";
private static final int WD_REPLACE_ALL = 2;
private static final int WD_FIND_CONTINUE = 1;
private Shell shell = null;
private OleFrame frame = null;
private OleClientSite wordSite = null;
private OleAutomation wordAutomation = null;
private OleAutomation activeDocumentAutomation = null;
private boolean cleaned = false;
* Create a new instance of the WordSearchReplace class.
public WordSearchReplace() {
this.shell = new Shell();
this.frame = new OleFrame(this.shell, SWT.NONE);
this.wordSite = new OleClientSite(this.frame, SWT.NONE, WordSearchReplace.PROG_ID);
this.wordAutomation = new OleAutomation(this.wordSite);
* Open an MS Word file. This is a file whose name ends with the extension
* .doc or .doc and which conforms to the correct format.
* Note; if it is possible to open the named file, an attempt is made
* to cache an OleAutomation object referencing that file which will be
* referred to in future as the active document. Most other methods
* need to capture references to further OleAutomation(s) that have the
* active document as their root.
* @param fileName An instance of the String class that encapsulates the
* path to and name of the file that is to be opened.
* Note; the full path name must be supplied as Word
* will be opening the file and no assumptions can
* safely be made concerning the applications 'home'
* folder.
* @throws NullPointerException if a null value is passed to the fileName
* parameter.
* @throws FileNotFoundException if it is not possible to locate the
* file.
* @throws IllegalArgumentException if the name of the file does not end
* with either the .dot or .doc extensions.
* @throws SWTException if a problem occurs whilst invoking any of the OLE
* methods.
public void openFile(String fileName) throws SWTException,
NullPointerException,
FileNotFoundException,
IllegalArgumentException {
OleAutomation documentsAutomation = null;
int[] id = null;
Variant[] arguments = null;
Variant invokeResult = null;
try {
// Check the the file name is not null
if(fileName == null) {
throw new NullPointerException("Null value passed to " +
"fileName parameters of the openFile() method.");
// Check the the file names ends with '.dot' or '.doc'.
// Remember to include templates and docuemnts
if(!(fileName.endsWith(".doc")) && !(fileName.endsWith(".dot"))) {
throw new IllegalArgumentException(
"The filename must end with the extensions \'.doc\' or \'.dot\'");
// Check that the file exists
File fileToPrint = new File(fileName);
if(!(fileToPrint.exists())) {
throw new FileNotFoundException("The file " +
fileName +
"cannot be found.");
// From the application, get an automation for the Documents property
documentsAutomation = this.getChildAutomation(this.wordAutomation,
"Documents");
// Get the ID of the Open method
id = documentsAutomation.getIDsOfNames(new String[]{"Open"});
if(id == null) {
throw new SWTException("It was not possible to recover an " +
"identifer for the Open method in WordSearchReplace.openFile().");
// Build an array of parameters - holds just the file name
arguments = new Variant[1];
arguments[0] = new Variant(fileName);
// Invoke the Open method on the Documents property
invokeResult = documentsAutomation.invoke(id[0], arguments);
// If the call to invoke the open method failed, throw an SWTException
// to terminate processing.
if(invokeResult == null) {
throw new SWTException("An error occurred whilst invoking the " +
"Open method for the following file: " +
fileName +
" in WordSearchReplace.openFile().");
// If it was possible to open the document successfully, grab an
// automation object referencing the active document here.
else {
this.activeDocumentAutomation = this.getChildAutomation(
this.wordAutomation, "ActiveDocument");
finally {
// If the automation was instantiated then dispose of it to
// release resources. This OleAutomation was only required
// to open the file and can safely be released here.
if(documentsAutomation != null) {
documentsAutomation.dispose();
* Save the currently open file - the active document.
* @throws SWTException if a problem occurs whilst invoking any of the OLE
* methods.
public void save() throws SWTException {
int[] id = null;
Variant invokeResult = null;
// From the automation for the ActiveDocument object, get an id for
// the Save method
id = this.activeDocumentAutomation.getIDsOfNames(new String[]{"Save"});
// If it was not possible to recover the id of the Save
// method, throw an exception to notify the user and terminate
// processing.
if(id == null) {
throw new SWTException("Unable to obtain an automation for " +
"the Save method in WordSearchReplace.save().");
// Invoke the Save method and catch the value returned
invokeResult = this.activeDocumentAutomation.invoke(id[0]);
// If a null value was returned then the invocation of the
// Save method failed. Throw an exception to notify the
// user and terminate processing.
if(invokeResult == null) {
throw new SWTException("A problem occurred invoking the " +
"Save method in WordSearchReplace.save().");
* Save the active document using the name provided.
* @param fileName Am instance of the String class encapsulating the name
* for the file. Again, the path to and name of the file should
* be supplied.
* @throws NullPointerException if a null value is passed to the fileName
* parameter.
* @throws IllegalArgumentException if either an empty String is passed
* to the fileName parameter or if the files name does not end
* with one of the two permissible extensions - .dot and .doc
public void saveAs(String fileName) throws SWTException,
NullPointerException,
IllegalArgumentException {
int[] id = null;
Variant[] arguments = null;
Variant invokeResult = null;
// If the fileName parameter is passed a null
// value, throw an exception.
if(fileName == null) {
throw new NullPointerException("A null value was passed to " +
"the fileName parameter of WordSearchReplace.saveAs().");
// If the fileName parameter has been passed an empty String
// then again throw an exception.
if(fileName.length() == 0) {
throw new NullPointerException("An empty string was passed " +
"to the fileName parameter of WordSearchReplace.saveAs().");
// Finally, make sure the file name ends in either
// .doc or .dot.
if((!fileName.endsWith(".dot")) && (!fileName.endsWith(".doc"))) {
throw new IllegalArgumentException("An illegal file name was " +
"passed to the fileName parameter of " +
"WordSearchReplace.saveAs(). The file name must " +
"end in \'.dot\' or \'.doc\'.");
// From the automation for the ActiveDocument object, get an id for
// the SaveAs method
id = this.activeDocumentAutomation.getIDsOfNames(new String[]{"SaveAs"});
// If it was not possible to recover the id of the SaveAs
// method, throw an exception to notify the user and terminate
// processing.
if(id == null) {
throw new SWTException("Unable to obtain an automation for " +
"the SaveAs method in WordSearchReplace.saveAs().");
// Build the array of arguments that will be passed to the invoke
// method when the SaveAs method is invoked. In this case, this
// array will contain a single member - a String object encapsulating
// the path to and name of the output file.
arguments = new Variant[1];
arguments[0] = new Variant(fileName);
// Invoke the SaveAs method and catch the value returned
invokeResult = this.activeDocumentAutomation.invoke(id[0], arguments);
// If a null value was returned then the invocation of the
// PrintOut method failed. Throw an exception to notify the
// user and terminate processing.
if(invokeResult == null) {
throw new SWTException("A problem occurred invoking the " +
"SaveAs method in WordSearchReplace.saveAs().");
* Mimics Words 'replace' functionality by searching the active
* document for evey string of characters that matches the value passed to
* the searchTerm parameter and replacing them with the string of
* characters passed to the replacementTerm method.
* It is possible to code a VBA macro within Word that will perfrom a serach
* and replace. That code would look like the following;
* <pre>
* Selection.Find.ClearFormatting
* Selection.Find.Replacement.ClearFormatting
* With Selection.Find
* .Text = "serach"
* .Replacement.Text = "search"
* .Forward = True
* .Wrap = wdFindContinue
* .Format = False
* .MatchCase = False
* .MatchWholeWord = False
* .MatchWildcards = False
* .MatchSoundsLike = False
* .MatchAllWordForms = False
* End With
* Selection.Find.Execute Replace:=wdReplaceAll
* <pre>
* and this method will 'automate' it.
* @param searchTerm An instance of the String class that will encapsulate
* the series of characters that should be replaced.
* @param replacementTerm An instance of the String class that will
* encapsulate the series of characters that should replace the
* searchTerm.
* @throws NullPointerException if a null value is passed to either the
* searchTerm or replacementTerm methods.
* @throws SWTException if a problem occurs when invoking any of the
* OLE methods.
public void replace(String searchTerm,
String replacementTerm) throws SWTException,
NullPointerException {
OleAutomation selectionFindAutomation = null;
OleAutomation childAutomation = null;
Variant[] arguments = null;
Variant invokeResult = null;
int[] id = null;
int[] namedArguments = null;
boolean success = true;
// Validate the searchTerm parameter and throw exception if
// null value passed.
if(searchTerm == null) {
throw new NullPointerException("Null value passed to " +
"searchTerm parameter of the replace() method.");
// Validate the replacementTerm parameter and throw exception if
// null value passed.
if(replacementTerm == null) {
throw new NullPointerException("Null value passed to " +
"replacementTerm parameter of the replace() method.");
// Most of the VBA instructions used to perform the search and
// replace functionality and child automations of Selection.Find,
// therefore, it is wise to cache that automation first.
// From the application, get an automation for the Selection property
childAutomation = this.getChildAutomation(this.wordAutomation,
"Selection");
selectionFindAutomation = this.getChildAutomation(childAutomation,
"Find");
// Next, using the cached automation, invoke the 'ClearFormatting'
// method, validate the returned value and invoke the method.
// Selection.Find.ClearFormatting
id = selectionFindAutomation.getIDsOfNames(new String[]{"ClearFormatting"});
if(id == null) {
throw new SWTException("It is not possible to recover an identifier " +
"for the ClearFormatting method in WordSearchReplace.replace() " +
"when clearing the formatting for the search string.");
invokeResult = selectionFindAutomation.invoke(id[0]);
if(invokeResult == null) {
throw new SWTException("A problem occurred invoking the " +
"ClearFormatting method in WordSearchReplace.repace() " +
"when clearing formatting for the search string.");
// Now, perform the same function but for the replacement string.
// Selection.Find.Replacement.ClearFormatting
childAutomation = this.getChildAutomation(selectionFindAutomation,
"Replacement");
id = childAutomation.getIDsOfNames(new String[]{"ClearFormatting"});
if(id == null) {
throw new SWTException("It is not possible to recover an identifier " +
"for the ClearFormatting method in WordSearchReplace.replace() " +
"when clearing the formatting for the replacement string.");
invokeResult = childAutomation.invoke(id[0]);
if(invokeResult == null) {
throw new SWTException("A problem occurred invoking the " +
"ClearFormatting method in WordSearchReplace.repace() " +
"when clearing formatting for the replacement string.");
// Firstly, set the search text.
// .Text = "search term"
arguments = new Variant[1];
arguments[0] = new Variant(searchTerm);
success = this.setPropertyValue(selectionFindAutomation, "Text", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the Text " +
"property for the search string in WordSearchReplace.replace().");
// Next, the replacement text
// .Replacement.Text = "replacement term"
childAutomation = this.getChildAutomation(selectionFindAutomation,
"Replacement");
arguments[0] = new Variant(replacementTerm);
success = this.setPropertyValue(childAutomation, "Text", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the Text property" +
" for the replacement string in WordSearchReplace.replace().");
// Set the direction of the search - forward in this case.
// .Forward = True
arguments[0] = new Variant(true);
success = this.setPropertyValue(selectionFindAutomation, "Forward", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the Forward " +
"property in WordSearchReplace.replace().");
// Tell the search to wrap. Note the literal wdFindContinue relates to
// a constant that is defined within Word. I have provided a static
// final to replace it called WD_FIND_CONTINUE
// .Wrap = wdFindContinue
arguments[0] = new Variant(WordSearchReplace.WD_FIND_CONTINUE);
success = this.setPropertyValue(selectionFindAutomation, "Wrap", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the Wrap " +
"property in WordSearchReplace.replace().");
// Set the Format property to False.
// .Format = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "Format", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the Format " +
"property in WordSearchReplace.replace().");
// Set the MatchCase property to false.
// .MatchCase = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "MatchCase", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the MatchCase " +
"property in WordSearchReplace.replace().");
// Set the MatchWholeWord property to false.
// .MatchWholeWord = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "MatchWholeWord", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the " +
"MatchWholeWord property in WordSearchReplace.replace().");
// Set the MatchWildCards property to false.
// .MatchWildcards = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "MatchWildCards", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the " +
"MatchWildCards property in WordSearchReplace.replace().");
// Set the MatchSoundsLike property to false.
// .MatchSoundsLike = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "MatchSoundsLike", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the " +
"MatchSoundsLike property in WordSearchReplace.replace().");
// Set the MatchAllWordForms property to false.
// .MatchAllWordForms = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "MatchAllWordForms", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the " +
"MatchAllWordForms property in WordSearchReplace.replace().");
// Invoke the Execute command passing the correct value to the Replace
// parameter. Again, wdReplaceAll is a constant that I have provided
// a ststic final for called WD_REPLACE_ALL
// Selection.Find.Execute Replace:=wdReplaceAll
id = selectionFindAutomation.getIDsOfNames(new String[]{"Execute", "Replace"});
if(id == null) {
throw new SWTException("It was not possible to recover an identifier " +
"for the Execute method in WordSearchReplace.replace().");
arguments = new Variant[1];
arguments[0] = new Variant(WordSearchReplace.WD_REPLACE_ALL);
namedArguments = new int[1];
namedArguments[0] = id[1];
// There was some indication that the invokeNoReply method should
// be used when making this call but no, invoke SEEMS to work well
//selectionFindAutomation.invokeNoReply(id[0], arguments, namedArguments);
invokeResult = selectionFindAutomation.invoke(id[0], arguments, namedArguments);
if(invokeResult == null) {
throw new SWTException("A problem occurred trying to invoke the " +
"Execute method in WordSearchReplace.replace().");
* Close the active document.
* @throws SWTException if a problem is encountered invoking any of the
* OLE methods.
public void closeFile() throws SWTException {
int[] id = null;
Variant[] arguments = null;
Variant invokeResult = null;
try {
// From the OleAutomation referencing the active document, recover
// the id of the Close method.
id = this.activeDocumentAutomation.getIDsOfNames(new String[]{"Close"});
// If it was not possible to recover the id of the Close
// method then throw an exception to notify the user and
// terminate processing.
if(id == null) {
throw new SWTException("It was not possible to recover an " +
"identifier for the Close method in " +
"WordSearchReplace.closeFile().");
// Invoke the Close method on the ActiveDocument automation
invokeResult = this.activeDocumentAutomation.invoke(id[0]);
// If the invocation of the Close method failed, throw an
// exception to notify the user and terminate processing.
if(invokeResult == null) {
throw new SWTException(
"An error occurred invoking the Close method in " +
"WordSearchReplace.closeFile().");
finally {
if(this.activeDocumentAutomation != null) {
this.activeDocumentAutomation.dispose();
* Release resources.
public void dispose() throws SWTException {
try {
// Set the cleaned flag to true. This prevents the method from
// running again if it is called from the finalize() method
this.cleaned = true;
// From the word automation, recover the id of the Quit method
int[] id = this.wordAutomation.getIDsOfNames(new String[]{"Quit"});
// If the id of the Quit method cannot be recovered
// throw an exception - not much good really though.
if(id == null) {
throw new SWTException("Unable to obtain an id for the Quit " +
"property in WordSearchReplace.dispose().");
// Invoke Quit
Variant result = this.wordAutomation.invoke(id[0]);
// If an error occurs during the invocation, throw an exception.
// Again though that exception is of limited value.
if(result == null) {
throw new SWTException("A problem occurred trying to invoke the " +
"Quit method in WordSearchReplace.dispose().");
finally {
// Finally, dispose of the word application automation.
this.wordAutomation.dispose();
* The finalize() method has been over-ridden to ensure that resources
* are correctly released if a WordSearchReplace object is created but
* not disposed of properly before it becomes eligible for garbage
* collection. The cleaned flag is used as acheck to ensure that the
* dispose() method cannot be called more than once.
public void finalize() throws Throwable {
if(!this.cleaned) {
this.dispose();
* Creates and returns a 'child' OleAutomation object. The object model
* employed by Word, Excel and the like, arrange objects, methods and
* properties hierarchically. To invoke a method, it is often necessary
* to iterate through this hierarchy from parent to child and this method
* supports that process.
* @param automation An OleAutomation object that references the parent
* automation.
* @param childName An instance of the String class that encapsulates the
* name of the child automation.
* @throws SWTException if a problem is encountered invoking one or
* other of the OLE methods.
private OleAutomation getChildAutomation(OleAutomation automation,
String childName) throws SWTException {
// Try to recove the unique identifier for the child automation
int[] id = automation.getIDsOfNames(new String[]{childName});
// If the identifier cannot be found then throw an exception to
// terminate processing.
if (id == null) {
throw new SWTException(
"A problem occurred trying to obtain and id for: " +
childName +
"in the getCWhen you call it the first time, it new Shell() constructs a new Display for you (the default).
The second time, it gets the default display, but you are in a different Thread now. Since you have to create your widgets in the UI thread, it gives you that error.
To run code in the UI thread, Display provides two methods:
display.syncexec(..)and
display.asyncexec(...)see
http://help.eclipse.org/help32/index.jsp?topic=/org.eclipse.platform.doc.isv/guide/swt_threading.htm
for more details. -
warning: Supported source version 'RELEASE_6' from annotation processor 'org.eclipse.persistence.internal.jpa.modelgen.CanonicalModelProcessor' less than -source '1.7'
Note: Creating static metadata factory ...
An annotation processor threw an uncaught exception.
Consult the following stack trace for details.
java.lang.ClassFormatError: Absent Code attribute in method that is not native or abstract in class file javax/persistence/PersistenceException
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:760)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:142)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:455)
at java.net.URLClassLoader.access$100(URLClassLoader.java:73)
at java.net.URLClassLoader$1.run(URLClassLoader.java:367)
at java.net.URLClassLoader$1.run(URLClassLoader.java:361)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:360)
at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2570)
at java.lang.Class.getDeclaredField(Class.java:2055)
at org.eclipse.persistence.internal.security.PrivilegedAccessHelper.findDeclaredField(PrivilegedAccessHelper.java:67)
at org.eclipse.persistence.internal.security.PrivilegedAccessHelper.getField(PrivilegedAccessHelper.java:223)
at org.eclipse.persistence.internal.helper.Helper.getField(Helper.java:980)
at org.eclipse.persistence.internal.descriptors.InstanceVariableAttributeAccessor.initializeAttributes(InstanceVariableAttributeAccessor.java:100)
at org.eclipse.persistence.mappings.DatabaseMapping.preInitialize(DatabaseMapping.java:1455)
at org.eclipse.persistence.mappings.foundation.AbstractDirectMapping.preInitialize(AbstractDirectMapping.java:913)
at org.eclipse.persistence.oxm.mappings.XMLDirectMapping.preInitialize(XMLDirectMapping.java:439)
at org.eclipse.persistence.oxm.XMLDescriptor.preInitialize(XMLDescriptor.java:559)
at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.initializeDescriptors(DatabaseSessionImpl.java:649)
at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.initializeDescriptors(DatabaseSessionImpl.java:632)
at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.initializeDescriptors(DatabaseSessionImpl.java:568)
at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.postConnectDatasource(DatabaseSessionImpl.java:799)
at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.login(DatabaseSessionImpl.java:756)
at org.eclipse.persistence.oxm.XMLContext$XMLContextState.setupSession(XMLContext.java:738)
at org.eclipse.persistence.oxm.XMLContext$XMLContextState.setupSession(XMLContext.java:1)
at org.eclipse.persistence.internal.oxm.Context$ContextState.<init>(Context.java:86)
at org.eclipse.persistence.oxm.XMLContext$XMLContextState.<init>(XMLContext.java:702)
at org.eclipse.persistence.oxm.XMLContext.<init>(XMLContext.java:192)
at org.eclipse.persistence.oxm.XMLContext.<init>(XMLContext.java:164)
at org.eclipse.persistence.oxm.XMLContext.<init>(XMLContext.java:154)
at org.eclipse.persistence.internal.jpa.modelgen.objects.PersistenceXMLMappings.createXMLContext(PersistenceXMLMappings.java:139)
at org.eclipse.persistence.internal.jpa.modelgen.objects.PersistenceXMLMappings.createXML2_1Context(PersistenceXMLMappings.java:123)
at org.eclipse.persistence.internal.jpa.modelgen.objects.PersistenceUnitReader.initPersistenceUnits(PersistenceUnitReader.java:178)
at org.eclipse.persistence.internal.jpa.modelgen.objects.PersistenceUnitReader.<init>(PersistenceUnitReader.java:72)
at org.eclipse.persistence.internal.jpa.modelgen.CanonicalModelProcessor.process(CanonicalModelProcessor.java:376)
at com.sun.tools.javac.processing.JavacProcessingEnvironment.callProcessor(JavacProcessingEnvironment.java:794)
at com.sun.tools.javac.processing.JavacProcessingEnvironment.discoverAndRunProcs(JavacProcessingEnvironment.java:705)
at com.sun.tools.javac.processing.JavacProcessingEnvironment.access$1800(JavacProcessingEnvironment.java:91)
at com.sun.tools.javac.processing.JavacProcessingEnvironment$Round.run(JavacProcessingEnvironment.java:1035)
at com.sun.tools.javac.processing.JavacProcessingEnvironment.doProcessing(JavacProcessingEnvironment.java:1176)
at com.sun.tools.javac.main.JavaCompiler.processAnnotations(JavaCompiler.java:1173)
at com.sun.tools.javac.main.JavaCompiler.compile(JavaCompiler.java:859)
at com.sun.tools.javac.main.Main.compile(Main.java:523)
at com.sun.tools.javac.main.Main.compile(Main.java:381)..................
I'm an undergraduate student in software engineering. I worked with EE and tried to built a EJB Application. It worked. But when i connected it to database using persistence it getting error as mentioned.
When i change my source Binary Format to jdk6 it runs without errors. What can i do for this without downgrading jdk version?I resolved my problem. The issue was the version of EclipseLink that I had specified in my pom.xml. Version 2.0.1 has an issue with the meta-model generation and, in fact, I wanted to be using version 2.1.1. Once I changed to 2.1.1 everything compiled correctly.
Just make certain that you include the correct EclipseLink repository.
<repository>
<id>EclipseLink Repo</id>
<name>EclipseLink Repository for the JPA implementation</name>
<url>http://www.eclipse.org/downloads/download.php?r=1&nf=1&file=/rt/eclipselink/maven.repo</url>
</repository> -
Org.eclipse.swt.SWTException: Invalid thread access - Action struts
Hi
I�m runing this WordSearchReplace java class that I got here in this forum, and I�m runing it doing search and replace in Ms word document if I run just one time it works ok, but if I run twice i got that erro, I�m runing that java class in my Action on struts.
I don�t know what is occur.
Can you help me?
Thanks
Following the example of call, mistakes and java class.
//======RUNING THE WordSearchReplace JAVA CLASS=========
WordSearchReplace wordSR = null;
try {
String[] v_text = {"#V46#","#V42#"};
String[] v_replace = {"Texto1","Texto2"};
wordSR = new WordSearchReplace();
wordSR.openFile(v_path+v_file_name);
for ( int i=0; i<v_text.length; i++ )
wordSR.replace( v_text, v_replace[i] );
wordSR.save();
wordSR.closeFile();
catch(Exception e) {
System.out.println("Caught: ERRO ao Executar WordSearchReplace " + e.getClass().getName());
System.out.println(e.getMessage());
e.printStackTrace(System.out);
finally {
if(wordSR != null) {
try {
wordSR.dispose();
catch(Exception innerE) {
System.out.println("Caught: " + innerE.getClass().getName());
System.out.println(innerE.getMessage());
innerE.printStackTrace(System.out);
//========ERRO ===========================
17:24:49,093 INFO [STDOUT] Invalid thread access
17:24:49,093 INFO [STDOUT] org.eclipse.swt.SWTException: Invalid thread access
17:24:49,093 INFO [STDOUT] at org.eclipse.swt.SWT.error(SWT.java:3563)
17:24:49,093 INFO [STDOUT] at org.eclipse.swt.SWT.error(SWT.java:3481)
17:24:49,093 INFO [STDOUT] at org.eclipse.swt.SWT.error(SWT.java:3452)
17:24:49,093 INFO [STDOUT] at org.eclipse.swt.widgets.Widget.error(Widget.java:432)
17:24:49,093 INFO [STDOUT] at org.eclipse.swt.widgets.Shell.<init>(Shell.java:274)
17:24:49,093 INFO [STDOUT] at org.eclipse.swt.widgets.Shell.<init>(Shell.java:265)
17:24:49,093 INFO [STDOUT] at org.eclipse.swt.widgets.Shell.<init>(Shell.java:218)
17:24:49,093 INFO [STDOUT] at org.eclipse.swt.widgets.Shell.<init>(Shell.java:156)
17:24:49,093 INFO [STDOUT] at br.com.tryblob.view.WordSearchReplace.<init>(WordSearchReplace.java:38)
17:24:49,093 INFO [STDOUT] at br.com.tryblob.view.WordAction.execute(WordAction.java:70)
17:24:49,093 INFO [STDOUT] at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
17:24:49,093 INFO [STDOUT] at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
17:24:49,093 INFO [STDOUT] at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
17:24:49,093 INFO [STDOUT] at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
17:24:49,093 INFO [STDOUT] at javax.servlet.http.HttpServlet.service(HttpServlet.java:697)
//====== WordSearchReplace JAVA CLASS=========
import java.util.ArrayList;
import java.util.Iterator;
import org.eclipse.swt.SWT;
import org.eclipse.swt.SWTException;
import org.eclipse.swt.internal.ole.win32.TYPEATTR;
import org.eclipse.swt.ole.win32.OLE;
import org.eclipse.swt.ole.win32.OleAutomation;
import org.eclipse.swt.ole.win32.OleClientSite;
import org.eclipse.swt.ole.win32.OleFrame;
import org.eclipse.swt.ole.win32.OleFunctionDescription;
import org.eclipse.swt.ole.win32.OlePropertyDescription;
import org.eclipse.swt.ole.win32.OleParameterDescription;
import org.eclipse.swt.widgets.Shell;
import org.eclipse.swt.ole.win32.Variant;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileWriter;
import java.io.BufferedWriter;
import java.io.IOException;
public class WordSearchReplace {
private static final String PROG_ID = "Word.Application";
private static final int WD_REPLACE_ALL = 2;
private static final int WD_FIND_CONTINUE = 1;
private Shell shell = null;
private OleFrame frame = null;
private OleClientSite wordSite = null;
private OleAutomation wordAutomation = null;
private OleAutomation activeDocumentAutomation = null;
private boolean cleaned = false;
* Create a new instance of the WordSearchReplace class.
public WordSearchReplace() {
this.shell = new Shell();
this.frame = new OleFrame(this.shell, SWT.NONE);
this.wordSite = new OleClientSite(this.frame, SWT.NONE, WordSearchReplace.PROG_ID);
this.wordAutomation = new OleAutomation(this.wordSite);
* Open an MS Word file. This is a file whose name ends with the extension
* .doc or .doc and which conforms to the correct format.
* Note; if it is possible to open the named file, an attempt is made
* to cache an OleAutomation object referencing that file which will be
* referred to in future as the active document. Most other methods
* need to capture references to further OleAutomation(s) that have the
* active document as their root.
* @param fileName An instance of the String class that encapsulates the
* path to and name of the file that is to be opened.
* Note; the full path name must be supplied as Word
* will be opening the file and no assumptions can
* safely be made concerning the applications 'home'
* folder.
* @throws NullPointerException if a null value is passed to the fileName
* parameter.
* @throws FileNotFoundException if it is not possible to locate the
* file.
* @throws IllegalArgumentException if the name of the file does not end
* with either the .dot or .doc extensions.
* @throws SWTException if a problem occurs whilst invoking any of the OLE
* methods.
public void openFile(String fileName) throws SWTException,
NullPointerException,
FileNotFoundException,
IllegalArgumentException {
OleAutomation documentsAutomation = null;
int[] id = null;
Variant[] arguments = null;
Variant invokeResult = null;
try {
// Check the the file name is not null
if(fileName == null) {
throw new NullPointerException("Null value passed to " +
"fileName parameters of the openFile() method.");
// Check the the file names ends with '.dot' or '.doc'.
// Remember to include templates and docuemnts
if(!(fileName.endsWith(".doc")) && !(fileName.endsWith(".dot"))) {
throw new IllegalArgumentException(
"The filename must end with the extensions \'.doc\' or \'.dot\'");
// Check that the file exists
File fileToPrint = new File(fileName);
if(!(fileToPrint.exists())) {
throw new FileNotFoundException("The file " +
fileName +
"cannot be found.");
// From the application, get an automation for the Documents property
documentsAutomation = this.getChildAutomation(this.wordAutomation,
"Documents");
// Get the ID of the Open method
id = documentsAutomation.getIDsOfNames(new String[]{"Open"});
if(id == null) {
throw new SWTException("It was not possible to recover an " +
"identifer for the Open method in WordSearchReplace.openFile().");
// Build an array of parameters - holds just the file name
arguments = new Variant[1];
arguments[0] = new Variant(fileName);
// Invoke the Open method on the Documents property
invokeResult = documentsAutomation.invoke(id[0], arguments);
// If the call to invoke the open method failed, throw an SWTException
// to terminate processing.
if(invokeResult == null) {
throw new SWTException("An error occurred whilst invoking the " +
"Open method for the following file: " +
fileName +
" in WordSearchReplace.openFile().");
// If it was possible to open the document successfully, grab an
// automation object referencing the active document here.
else {
this.activeDocumentAutomation = this.getChildAutomation(
this.wordAutomation, "ActiveDocument");
finally {
// If the automation was instantiated then dispose of it to
// release resources. This OleAutomation was only required
// to open the file and can safely be released here.
if(documentsAutomation != null) {
documentsAutomation.dispose();
* Save the currently open file - the active document.
* @throws SWTException if a problem occurs whilst invoking any of the OLE
* methods.
public void save() throws SWTException {
int[] id = null;
Variant invokeResult = null;
// From the automation for the ActiveDocument object, get an id for
// the Save method
id = this.activeDocumentAutomation.getIDsOfNames(new String[]{"Save"});
// If it was not possible to recover the id of the Save
// method, throw an exception to notify the user and terminate
// processing.
if(id == null) {
throw new SWTException("Unable to obtain an automation for " +
"the Save method in WordSearchReplace.save().");
// Invoke the Save method and catch the value returned
invokeResult = this.activeDocumentAutomation.invoke(id[0]);
// If a null value was returned then the invocation of the
// Save method failed. Throw an exception to notify the
// user and terminate processing.
if(invokeResult == null) {
throw new SWTException("A problem occurred invoking the " +
"Save method in WordSearchReplace.save().");
* Save the active document using the name provided.
* @param fileName Am instance of the String class encapsulating the name
* for the file. Again, the path to and name of the file should
* be supplied.
* @throws NullPointerException if a null value is passed to the fileName
* parameter.
* @throws IllegalArgumentException if either an empty String is passed
* to the fileName parameter or if the files name does not end
* with one of the two permissible extensions - .dot and .doc
public void saveAs(String fileName) throws SWTException,
NullPointerException,
IllegalArgumentException {
int[] id = null;
Variant[] arguments = null;
Variant invokeResult = null;
// If the fileName parameter is passed a null
// value, throw an exception.
if(fileName == null) {
throw new NullPointerException("A null value was passed to " +
"the fileName parameter of WordSearchReplace.saveAs().");
// If the fileName parameter has been passed an empty String
// then again throw an exception.
if(fileName.length() == 0) {
throw new NullPointerException("An empty string was passed " +
"to the fileName parameter of WordSearchReplace.saveAs().");
// Finally, make sure the file name ends in either
// .doc or .dot.
if((!fileName.endsWith(".dot")) && (!fileName.endsWith(".doc"))) {
throw new IllegalArgumentException("An illegal file name was " +
"passed to the fileName parameter of " +
"WordSearchReplace.saveAs(). The file name must " +
"end in \'.dot\' or \'.doc\'.");
// From the automation for the ActiveDocument object, get an id for
// the SaveAs method
id = this.activeDocumentAutomation.getIDsOfNames(new String[]{"SaveAs"});
// If it was not possible to recover the id of the SaveAs
// method, throw an exception to notify the user and terminate
// processing.
if(id == null) {
throw new SWTException("Unable to obtain an automation for " +
"the SaveAs method in WordSearchReplace.saveAs().");
// Build the array of arguments that will be passed to the invoke
// method when the SaveAs method is invoked. In this case, this
// array will contain a single member - a String object encapsulating
// the path to and name of the output file.
arguments = new Variant[1];
arguments[0] = new Variant(fileName);
// Invoke the SaveAs method and catch the value returned
invokeResult = this.activeDocumentAutomation.invoke(id[0], arguments);
// If a null value was returned then the invocation of the
// PrintOut method failed. Throw an exception to notify the
// user and terminate processing.
if(invokeResult == null) {
throw new SWTException("A problem occurred invoking the " +
"SaveAs method in WordSearchReplace.saveAs().");
* Mimics Words 'replace' functionality by searching the active
* document for evey string of characters that matches the value passed to
* the searchTerm parameter and replacing them with the string of
* characters passed to the replacementTerm method.
* It is possible to code a VBA macro within Word that will perfrom a serach
* and replace. That code would look like the following;
* <pre>
* Selection.Find.ClearFormatting
* Selection.Find.Replacement.ClearFormatting
* With Selection.Find
* .Text = "serach"
* .Replacement.Text = "search"
* .Forward = True
* .Wrap = wdFindContinue
* .Format = False
* .MatchCase = False
* .MatchWholeWord = False
* .MatchWildcards = False
* .MatchSoundsLike = False
* .MatchAllWordForms = False
* End With
* Selection.Find.Execute Replace:=wdReplaceAll
* <pre>
* and this method will 'automate' it.
* @param searchTerm An instance of the String class that will encapsulate
* the series of characters that should be replaced.
* @param replacementTerm An instance of the String class that will
* encapsulate the series of characters that should replace the
* searchTerm.
* @throws NullPointerException if a null value is passed to either the
* searchTerm or replacementTerm methods.
* @throws SWTException if a problem occurs when invoking any of the
* OLE methods.
public void replace(String searchTerm,
String replacementTerm) throws SWTException,
NullPointerException {
OleAutomation selectionFindAutomation = null;
OleAutomation childAutomation = null;
Variant[] arguments = null;
Variant invokeResult = null;
int[] id = null;
int[] namedArguments = null;
boolean success = true;
// Validate the searchTerm parameter and throw exception if
// null value passed.
if(searchTerm == null) {
throw new NullPointerException("Null value passed to " +
"searchTerm parameter of the replace() method.");
// Validate the replacementTerm parameter and throw exception if
// null value passed.
if(replacementTerm == null) {
throw new NullPointerException("Null value passed to " +
"replacementTerm parameter of the replace() method.");
// Most of the VBA instructions used to perform the search and
// replace functionality and child automations of Selection.Find,
// therefore, it is wise to cache that automation first.
// From the application, get an automation for the Selection property
childAutomation = this.getChildAutomation(this.wordAutomation,
"Selection");
selectionFindAutomation = this.getChildAutomation(childAutomation,
"Find");
// Next, using the cached automation, invoke the 'ClearFormatting'
// method, validate the returned value and invoke the method.
// Selection.Find.ClearFormatting
id = selectionFindAutomation.getIDsOfNames(new String[]{"ClearFormatting"});
if(id == null) {
throw new SWTException("It is not possible to recover an identifier " +
"for the ClearFormatting method in WordSearchReplace.replace() " +
"when clearing the formatting for the search string.");
invokeResult = selectionFindAutomation.invoke(id[0]);
if(invokeResult == null) {
throw new SWTException("A problem occurred invoking the " +
"ClearFormatting method in WordSearchReplace.repace() " +
"when clearing formatting for the search string.");
// Now, perform the same function but for the replacement string.
// Selection.Find.Replacement.ClearFormatting
childAutomation = this.getChildAutomation(selectionFindAutomation,
"Replacement");
id = childAutomation.getIDsOfNames(new String[]{"ClearFormatting"});
if(id == null) {
throw new SWTException("It is not possible to recover an identifier " +
"for the ClearFormatting method in WordSearchReplace.replace() " +
"when clearing the formatting for the replacement string.");
invokeResult = childAutomation.invoke(id[0]);
if(invokeResult == null) {
throw new SWTException("A problem occurred invoking the " +
"ClearFormatting method in WordSearchReplace.repace() " +
"when clearing formatting for the replacement string.");
// Firstly, set the search text.
// .Text = "search term"
arguments = new Variant[1];
arguments[0] = new Variant(searchTerm);
success = this.setPropertyValue(selectionFindAutomation, "Text", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the Text " +
"property for the search string in WordSearchReplace.replace().");
// Next, the replacement text
// .Replacement.Text = "replacement term"
childAutomation = this.getChildAutomation(selectionFindAutomation,
"Replacement");
arguments[0] = new Variant(replacementTerm);
success = this.setPropertyValue(childAutomation, "Text", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the Text property" +
" for the replacement string in WordSearchReplace.replace().");
// Set the direction of the search - forward in this case.
// .Forward = True
arguments[0] = new Variant(true);
success = this.setPropertyValue(selectionFindAutomation, "Forward", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the Forward " +
"property in WordSearchReplace.replace().");
// Tell the search to wrap. Note the literal wdFindContinue relates to
// a constant that is defined within Word. I have provided a static
// final to replace it called WD_FIND_CONTINUE
// .Wrap = wdFindContinue
arguments[0] = new Variant(WordSearchReplace.WD_FIND_CONTINUE);
// System.out.println("jose vieira WD_FIND_CONTINUE:" + arguments[0]);
success = this.setPropertyValue(selectionFindAutomation, "Wrap", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the Wrap " +
"property in WordSearchReplace.replace().");
// Set the Format property to False.
// .Format = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "Format", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the Format " +
"property in WordSearchReplace.replace().");
// Set the MatchCase property to false.
// .MatchCase = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "MatchCase", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the MatchCase " +
"property in WordSearchReplace.replace().");
// Set the MatchWholeWord property to false.
// .MatchWholeWord = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "MatchWholeWord", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the " +
"MatchWholeWord property in WordSearchReplace.replace().");
// Set the MatchWildCards property to false.
// .MatchWildcards = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "MatchWildCards", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the " +
"MatchWildCards property in WordSearchReplace.replace().");
// Set the MatchSoundsLike property to false.
// .MatchSoundsLike = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "MatchSoundsLike", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the " +
"MatchSoundsLike property in WordSearchReplace.replace().");
// Set the MatchAllWordForms property to false.
// .MatchAllWordForms = False
arguments[0] = new Variant(false);
success = this.setPropertyValue(selectionFindAutomation, "MatchAllWordForms", arguments);
if(!success) {
throw new SWTException("A problem occurred setting the " +
"MatchAllWordForms property in WordSearchReplace.replace().");
// Invoke the Execute command passing the correct value to the Replace
// parameter. Again, wdReplaceAll is a constant that I have provided
// a ststic final for called WD_REPLACE_ALL
// Selection.Find.Execute Replace:=wdReplaceAll
id = selectionFindAutomation.getIDsOfNames(new String[]{"Execute", "Replace"});
if(id == null) {
throw new SWTException("It was not possible to recover an identifier " +
"for the Execute method in WordSearchReplace.replace().");
arguments = new Variant[1];
arguments[0] = new Variant(WordSearchReplace.WD_REPLACE_ALL);
namedArguments = new int[1];
namedArguments[0] = id[1];
// There was some indication that the invokeNoReply method should
// be used when making this call but no, invoke SEEMS to work well
//selectionFindAutomation.invokeNoReply(id[0], arguments, namedArguments);
invokeResult = selectionFindAutomation.invoke(id[0], arguments, namedArguments);
if(invokeResult == null) {
throw new SWTException("A problem occurred trying to invoke the " +
"Execute method in WordSearchReplace.replace().");
* Close the active document.
* @throws SWTException if a problem is encountered invoking any of the
* OLE methods.
public void closeFile() throws SWTException {
int[] id = null;
Variant[] arguments = null;
Variant invokeResult = null;
try {
// From the OleAutomation referencing the active document, recover
// the id of the Close method.
id = this.activeDocumentAutomation.getIDsOfNames(new String[]{"Close"});
// If it was not possible to recover the id of the Close
// method then throw an exception to notify the user and
// terminate processing.
if(id == null) {
throw new SWTException("It was not possible to recover an " +
"identifier for the Close method in " +
"WordSearchReplace.closeFile().");
// Invoke the Close method on the ActiveDocument automation
invokeResult = this.activeDocumentAutomation.invoke(id[0]);
// If the invocation of the Close method failed, throw an
// exception to notify the user and terminate processing.
if(invokeResult == null) {
throw new SWTException(
"An error occurred invoking the Close method in " +
"WordSearchReplace.closeFile().");
finally {
if(this.activeDocumentAutomation != null) {
this.activeDocumentAutomation.dispose();
* Release resources.
public void dispose() throws SWTException {
try {
// Set the cleaned flag to true. This prevents the method from
// running again if it is called from the finalize() method
this.cleaned = true;
// From the word automation, recover the id of the Quit method
int[] id = this.wordAutomation.getIDsOfNames(new String[]{"Quit"});
// If the id of the Quit method cannot be recovered
// throw an exception - not much good really though.
if(id == null) {
throw new SWTException("Unable to obtain an id for the Quit " +
"property in WordSearchReplace.dispose().");
// Invoke Quit
Variant result = this.wordAutomation.invoke(id[0]);
// If an error occurs during the invocation, throw an exception.
// Again though that exception is of limited value.
if(result == null) {
throw new SWTException("A problem occurred trying to invoke the " +
"Quit method in WordSearchReplace.dispose().");
finally {
// Finally, dispose of the word application automation.
this.wordAutomation.dispose();
* The finalize() method has been over-ridden to ensure that resources
* are correctly released if a WordSearchReplace object is created but
* not disposed of properly before it becomes eligible for garbage
* collection. The cleaned flag is used as acheck to ensure that the
* dispose() method cannot be called more than once.
public void finalize() throws Throwable {
if(!this.cleaned) {
this.dispose();
* Creates and returns a 'child' OleAutomation object. The object model
* employed by Word, Excel and the like, arrange objects, methods and
* properties hierarchically. To invoke a method, it is often necessary
* to iterate through this hierarchy from parent to child and this method
* supports that process.
* @param automation An OleAutomation object that references the parent
* automation.
* @param childName An instance of the String class that encapsulates the
* name of the child automation.
* @throws SWTException if a problem is encountered invoking one or
* other of the OLE methods.
private OleAutomation getChildAutomation(OleAutomation automation,
String childName) throws SWTException {
// Try to recove the unique identifier for the child automation
int[] id = automation.getIDsOfNames(new String[]{childName});
// If the identifier cannot be found then throw an exception to
// terminate processing.
if (id == null) {
throw new SWTException(
"A problem occurred trying to obtain and id for: " +
childName +
"in the getChildAutomation() method.");
// SWT's implementation of OLE referes to all of Words objects, methods
// and properties using the single term 'property'. The next stage
// therefore is to recover a refence to the 'property' that relates
// to the child automation.
Variant pVarResult = automation.getProperty(id[0]);
// If it is not possible to recover a 'property' for the child
// automation, then throw an SWTException.
if (pVarResult == null) {
throw new SWTException(
"A problem occurred trying to obtain an automation for property: " +
id[0] +
" in the getChildAutomation() method.");
// As we are after a child automation in this instance, call the
// getAutomation() method on the 'property'.
return(pVarResult.getAutomation());
* Sets the value of a property.
* @param automation An instance of the OleAutomation class that will
* hold a reference to the properties parent automation object
* @param propertyName An instance of the String class that encapsulates the
* name of the property whose value is to be set.
* @param arguments An array of type Variant whose elements contain the
* values that will be set for the named property.
* @return A primitive boolean value that indicates whether or not the
* properties value was successfully set.
* @throws NullPointerException will be thrown if a null value is passed to
* any of the methods three arguments.
* @throws IllegalArgumentException will be thrown if an empty String
* is passed to the propertyName parameter or if an empty array
* is passed to the arguments parameter. Note, no check is made
* on the vallues of the elements in the arguments array.
* @throws SWTException will be thrown if a problem is encountered
* imvoking any of the OLE methods.
private boolean setPropertyValue(OleAutomation automation,
String propertyName,
Variant[] arguments) throws SWTException,
NullPointerException,
IllegalArgumentException {
// Validate the various parameters
if(automation == null) {
throw new NullPointerException(
"A null value was pasAlright, I'll try to keep it as simple as possible. If that's not going to work out, we can always complicate it later :)
I suppose you had a look at the link and I assume you know about threads.
We can easily fix this issue if you are instantiating, calling and disposing the object within one thread, e.g. you use it only in one method like
public mySwtExecutionMethod(String fileName){
WordSearchReplace replace = new WordSearchReplace();
// do your replacing here
replace.dispose();
// no reference to replace is left so it won't escape this thread
}Now the fix for your class becomes simple. As you remember from the link, you have to call all methods from within the UI thread. We will now create a Display every time upon instantiation of WordSearchReplace, so the current thread becomes the UI thread.
I had a look at the constructor, and the overhead doesn't seem that bad, provided this is not a dedicated search&replace server.
private final Display display;
public WordSearchReplace()
display = new Display(); // create display
this.shell = new Shell(display); // initialize shell with new display so this thread becomes the UI thread
this.frame = new OleFrame(this.shell, SWT.NONE);
this.wordSite = new OleClientSite(this.frame, SWT.NONE, WordSearchReplace.PROG_ID);
this.wordAutomation = new OleAutomation(this.wordSite);
}Since we always create a new Display, we should also dispose it. There is already a dispose() method, so we just have to add to it
display.dispose();That's it!
If you hold on longer to your reference and this isn't working for you, you'd have to do a lot more synchronizing and that the UI thread still exist as long as the reference.
Wish you good luck -
Import org.eclipse.persistence.sessions.Project ?
Hello,
I have a legacy mapping file that is a Java file and its class extends org.eclipse.persistence.sessions.Project.
This file maintains the toplink mapping and is the only toplink configuration of the project. During its inception, the webgain workbench was used to create the file. Later, it was totally hand maintained.
Now, we would like to bring this to be managed in the JDeveloper Toplink workbench.
Could you please tell if this is possible.
Thanks,
RajUsername and password supplied in the persistence.xml file should be for the Database configured user. This user is not an OS user.
--Gordon -
Error at the time of deploying App for SP 2013
When I try to deploy any App created using VS 2012, giving error below. Please provide some help to resolve it.
Build started: Project: FleetManagementApp, Configuration: Debug Any CPU ------
------ Deploy started: Project: FleetManagementApp, Configuration: Debug Any CPU ------
Active Deployment Configuration: Deploy App for SharePoint
Skipping deployment step because a pre-deployment command is not specified.
Skipping the uninstall step because the app for SharePoint is not installed on the server.
Install app for SharePoint:
Uploading the app for SharePoint...
Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes.
If you see this message repeatedly, contact your administrator.
========== Build: 1 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========Hi,
Please check the link below, it about the simialr issue.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/c8eb6c92-e1b2-45a9-840e-c782bdc933ec/error-occurred-in-deployment-step-install-app-for-sharepoint-were-sorry-we-werent-able-to?forum=sharepointdevelopment
Best Regards
Dennis Guo
TechNet Community Support -
Error : An error occurred while automatically activating bundle org.eclipse
Hi,
OpenScript closed with unsaved changes and now I cannot get it to open again. I checked out the logs it was giving the below error.
!ENTRY org.eclipse.core.resources 2 10035 2013-03-28 10:05:18.046
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.
!ENTRY org.eclipse.osgi 4 0 2013-03-28 10:05:18.062
!MESSAGE An error occurred while automatically activating bundle org.eclipse.core.resources (326).
!STACK 0
org.osgi.framework.BundleException: Exception in org.eclipse.core.resources.ResourcesPlugin.start() of bundle org.eclipse.core.resources.
I do not mind losing the file with the unsaved changes. Please let me know if anyone has faced a similar problem and the solution for the same.
Thanks!Hi,
OpenScript closed with unsaved changes and now I cannot get it to open again. I checked out the logs it was giving the below error.
!ENTRY org.eclipse.core.resources 2 10035 2013-03-28 10:05:18.046
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.
!ENTRY org.eclipse.osgi 4 0 2013-03-28 10:05:18.062
!MESSAGE An error occurred while automatically activating bundle org.eclipse.core.resources (326).
!STACK 0
org.osgi.framework.BundleException: Exception in org.eclipse.core.resources.ResourcesPlugin.start() of bundle org.eclipse.core.resources.
I do not mind losing the file with the unsaved changes. Please let me know if anyone has faced a similar problem and the solution for the same.
Thanks!
Maybe you are looking for
-
Extension Manager CC does not see .mxp
I can not open .mxp in Extension Manager CC on Mac OS 10.8.5. Extension Manager CC does not see files. I've done update and all steps: http://helpx.adobe.com/flash/kb/install-extensions-flash-professional.html
-
After the latest update 10.9.2 my macbook pro wont preview pdf in safari or chrome?
After the latest update 10.9.2 on my macbook pro I cannot preview pdf in my browsers (safari and chrome), I can save the pdf and view it later though. As an example I cannot preview it in my gmail, instead of adobe little icon there is a question mar
-
Invalid object name 'dbo.v_R_System'
Hi, About six months ago I implemented SCCM in our domain and it's been working great. This morning, when I attempted to run one of the Asset Intelligence reports in the console, I received the following error... An error has occurred during report p
-
Problem with the quantity field
hi every one i am facing a problem with the quantity field (vbap-kwmeng) as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid. among all the fields displayed in the alv grid only this
-
Compilers with (good) support for c++11
I'm looking for more compilers to cross check and optimize the project I'm working on. As I tested and tried a lot of new c++11 features, those should be supported. Up to now on my machine I have: g++ (the good one! ) clang++ (does not support openMP