Org Info (Vacant Positions and Position details)

Hi there,
I would like to find some info regarding the following -
1. Table or FM which would give the list of all org units in a company.
I know that we could probably get them from hrp10001, but I would want to know if there is a table which holds all the org units created in a company along with their texts
2. Given the org unit, can we find all the vacant positions in that org unit. If so how?Also what is the table to get the position text.
3. Is there a table or FM to get the location/state/city of the position. I mean if the company has positions all over the country, can we find the locations of the corresponding positions.
Any kind of suggestions or input is highly appreciated.
Thanks
M
Edited by: M on Dec 22, 2008 7:27 AM
Edited by: M on Dec 22, 2008 6:48 PM

If maintained, the location details of the position could be found in HRP1028.
Also, some companies use a relationship to link the location to the position. If such a relation exits, then you can pick it up from hrp1001
- Mahi
Edited by: Mahi on Jan 15, 2009 5:14 AM

Similar Messages

  • BAPI to bring TAX INFO, ORDER HISTORY and PAYMENT DETAILS of a PO ??

    Hi All,
    Is there any BAPI that brings
    TAX INFO
    ORDER HISTORY and
    PAYMENT DETAILS of a PO ?
    Please let me know.
    Thnx.
    Regards,
    Nandha

    Hi,
    The BAPI exports all details required however I am not sure whether this exports payment details as well.  Kindly let me know if this exports payment details or is there any other BAPI that provide these details.
    Thnx.

  • Update table HRP1001. Change the Position and the Org Unit.

    Hi,
    I am new to SAP HR and have been given a work in this area. The requirement is to update the relationship table HRP1001 replacing the old Manager' Position and the Org Unit with the New Manager's Position and the Org. Unit.
    I have some how found out the way to get the Postion and the Org unit of the old manager. Now I am replacing the same with the new details using the Update HRP1001 Command but this is the old and not recommended method acheiving this task.
    Can anyone please suggest me any Function Module OR the BAPI to update the HRP 1001 table with the New MAnager;s Position and the Org Unit.
    Thanks...!!!
    Regards,
    Deepak.

    Hi Kalpesh,
    I am using the FM: 'BAPI_HRMASTER_SAVE_REPL_MULT'but still not updating. I am trying to change the Position and the Org unit but not successful yet.
    I first used the Operator 'I' withi the table BAPIHROBJ-OPERATOR, it failed then I tried 'U' for update it still failed. Can you please let me know how many such operations possible with their charecter values apart from I & U. the domain value set does not exist as it is char1.
    Now I came to know that I have to terminate the old relationship by changing the ENDDA and create a new one with the new BEGDA as tomorrow's date.
    Can you please suggest something.
    Regards,
    Deepak.

  • How to copy the  positions and their relationships of one org.unit to other

    f there about 20 organization units among which 6 org.units have same positions and same relationships ,i know that we can create one org.units and their relationships among 6 similar org.units and then copy the same position and relationships to other 5 org.units as well instead of individually creating positions and assigning relationships to them  which results in wasting a quality time.but i dont know how to copy it? so please help me by informing me in details how to copy the positions n their relationships to other org units.

    Hi.
    This may sound like a bit of a pain in the *** but why not save the channel strip settings into your own folder then that way you can open them up in other songs and you have some channel strips to try out when you cant find anything else to fit. Plus its fun to open up lots of different audio onto the tracks and see what the effects sound like, Brian Eno style.....
    Hope this helps

  • Actions for Org.Units, Jobs and Positions

    Dear All,
    I know how to create or copy the available actions for Org Units , Jobs and positions thro' the table T777M and run them through PP03.
    Once I do it , when I want to skip some of the relationships it doesnt allow me to , the next page tab is grayed out.
    I mean if we have for ex. a position reporting to a position and because he is, say CEO and I want to skip that relationship I am unable to , how to activate the skip or Next page tab ??
    Regards
    Uday

    Hi,
    Goto table T77IV click on maintain, Click on New Entries >> Enter the subgroup ( PVOB) PV - Plan Verson and OB is for Object you want to maintain the number ranges for eg : 01C for Job. >> Enter and save the record...
    It will take u to the next screen  >> Click on maintain intervals >> Click on Add Intervals >> New screen will appear ... enter the details as below :
    NO    From Number   To Number     Remarks
    01      1                     19999999        This is Object range
    Note : do not enter anything in "Current Number" &  Do not select "Ext"
    I hope this will help you....
    regards,
    Navinkumar

  • Number range for Org.Units, Jobs and position

    Hi,
    Can someone guide me on how to create number range for Org. Units from say 10000000 (My org unit series should start with 1xxxxxxx), Jobs 20000000 and Positions from 30000000. Step by step would be helpful.
    Also any link to any document would be appreciated 
    Regards
    Uday

    Hi,
    Goto table T77IV click on maintain, Click on New Entries >> Enter the subgroup ( PVOB) PV - Plan Verson and OB is for Object you want to maintain the number ranges for eg : 01C for Job. >> Enter and save the record...
    It will take u to the next screen  >> Click on maintain intervals >> Click on Add Intervals >> New screen will appear ... enter the details as below :
    NO    From Number   To Number     Remarks
    01      1                     19999999        This is Object range
    Note : do not enter anything in "Current Number" &  Do not select "Ext"
    I hope this will help you....
    regards,
    Navinkumar

  • Extending the End Date of Relationship Org. Unit and Position

    Hi All,
    Please help me below.
    Problem: The end date for the relationship between org. unit and position should be set back to 31.12.9999. It was accidentally been set to 31.03.9999 and results to two records in infotype 0001, which the wrong record should be deleted.
    This can only be deleted by changing the relationship end date in PO13 but unfortunately, the user doesn't have any access to this transaction.
    Request: Can you explain to me on how the end date can be change in transaction PPOME or PPOM_OLD as these are the only transactions the user has an access. I'd already explored these transactions but I can't find on how it should be deleted here.
    Thanks!

    Hi Raju,
    Thanks for this information. This was a very helpful answer. But I only need to extend the end date of a particular infotype 0001 record of a particular employee. I think the report will extend all of the records of all the employees in the system. I can't find any parameter in the report wherein I can set the employee number I wish to extend the end date.
    Thanks!

  • Missing position and Org Unit relationship in PO13

    Hello SAP Pundits,
    I created a Position 1234 with transaction PPOM with Org Unit A and Job code X with start date 01/01/2009
    Now I hire an employee XYZ with this position X from start date 01/01/2009.
    When I go and see position X in PO13 it shows following relationships
    1)     Position 1234 - Org Unit A from 01/01/2009 to 31/12/9999
    2)     Position 1234 u2013 Job Code X from 01/01/2009 to 31/12/9999
    3)     Position 1234 u2013 Person XYZ from 01/01/2009 to 31/12/9999
    Perfect till now.
    Now if I change the Org Unit of the Position 1234 from A to B from date 01/04/2009 using PO13.
    A new record is created in IT0001 with start date 01/04/2009 and previous record is delimited.
    But now if I check the relationships in PO13 for position 1234 I donu2019t see the new record for Position 1234 and Org Unit B.
    However the previous relationship between position 1234 and Org Unit A is delimited till 31/03/2009.
    Why am I not able to see the assignment of Positon 1234 with new Org Unit B? Any reason why I am getting such an error?
    Thanks in advance.
    Regards,
    Ajay Hosur

    When you have changed the Position 1234 to org Unit  B from 01.04.2009 then the previous relationship will not show in po13, it goes into History which you can see in Complete Position Description..
    goto pp01 and select that position and create relationship with Org Unit B... am not sure why in Infotype 0001, previous record get delimited and new record got created..

  • HR Data Synchronization (Org Unit, Position and Employee) to SRM

    Hi All Expert,
    Currently, I had replicate the HR data (Org Unit, Position and Employee) to SRM thru transaction PFAL.
    Each time there is a new position or new employee, I have to run PFAL and run manually by include the new position number or new employee into the program to replicate to SRM.
    Does SAP have any specifiy program or step which I have follow to allow such automation? Is there any variant that I could set?
    How to trigger the new Org units which are created in HR to replicate to SRM without any manual input into selection field of Object ID during running the PFAL?
    We are trying to achieve automation of synchronization between changes/new  creation in HR to replicate to SRM.
    Thank for your help.
    Paul

    Hello Paul,
    Below notes will surely help you..
    1.The composite note for the process is 390380 - HR/ALE distribution in EBP/SRM.
    2.The initial description of the process can be found in note 312090 - Integration HR -
    EBP/SRM.
    Thanks & Regards
    Arshad

  • Impact of changing positions and Org Unit short text

    Hi All..
    This is regarding the impact  of changing positions and Org Unit short text(SAP name - Object Abbreviation, technical field u2013 hrp1000-short).The new approach we are ging to have is to keep short text same across the business unit.
    Example:
    All position in US will have short text u2013 USS
    Similarly All US Org Unit short text will be COMUS
    I was wondering, from SAP best practices point of view, do you see any downside in this approach?
    Example: Any problem in searching position or org using search term.
    Please pin your thoughts...
    Thanks,
    Kumar

    Hi,
    Normally such change will not have any impact in PA module.
    Only in exceptional cases it will have an impact in following cases:
    1. First and mandatory condition that you use abbreviation as position name in IT 0001. If this is the case parameter PLOGI TEXTC (in table T77S0) should be equal X.
    2. Second condition is that parameter PLOGI SPLIT is equal to X. That means that change of object name will lead to record split in IT 0001 in PA.
    So if in table T77S0 you don't have setting PLOGI TEXTC = X and PLOGI SPLIT = X you can go ahead with change of positions abbreviations. It will have no impact on other modules.
    Cheers!

  • FM to create Position and Org  unit

    Hi  Friends-
    What are the Function Module to create  Position and Org unit in  HR ?  
    Regards
    Meeta

    Hi,
    Try this:
    BAPI_HRMASTER_SAVE_REPL_MULT
    BPU_CREATE_ORGUNIT_AND_BUPA
    Refer:
    Re: BAPI or FM to create OrgUnits and positions in Organizational Managemen

  • RHINTE00 - Position and org unit deleted in infotype 0001 not transferred

    Hi all,
    we are using report RHINTE00 to transfer the assignations with positions and org units made in infotype 1 to PPOME.
    Everything works fine when we are assigning a position and org unit.
    But when we remove the entry and run the report, the assignation in the PPOME still exists..
    Do I have to do something special to delete the relationships ?
    thanks in advance !!

    Hello,
    If you have terminated some employees, to remove relationship without existing objects, you have to use report. RHCHECKRELATIONS. Then if you just need to delimit them, make sure that org. unit exists in table T527X and rerun report RHINTE00. Hope it helps,
    Regards
    Christine

  • FM to Delete Position and Central person from org unit?

    Hi
    In SRM, we used tr-cd USERS_GEN to create position/CP using SU01 user.
    In transaction PPOMA_BBP we can see Org unit assigned to position(S) and Central person(CP).
    How to unassign or delete the Position and Central person from org unit?
    Can you pls tell me any Func Module available.?
    Regards
    Chandra
    Edited by: princeck on Mar 10, 2011 2:54 AM

    Hi
    HR_CENTRALPERSON_DELETE  is working fine.
    Can you tell me how to delete position from Org unit. I want to delete it using FM or program.
    How to execute this program BUPA_TEST_DELETE?
    I gave Business partner as input, but it does not delete...anything. pls guide how to exeute.
    Any FM available.
    Regards
    Chandra

  • Creating a new position and updating IT 1028 using HCM processes and forms

    I have to create a new position and update the related infotypes using the design time framework of HCM processes and forms. The problem I am facing is the info type 1028 is not a part of the de coupled infotype framework and does not appear in the service fields list. How can I update the infotype 1028? I was thinking of updating it using the FLUSH method of the class implementing the ADV services interface IF_HRASR00GEN_SERVICE_ADVANCED by calling the function module RH_INSERT_INFTY. But, how do I get the position ID created? Is there any other way of achieving this? Please help as soon as possible.

    HI
    Create one Function Module to return all the vacant positions and load that in a drop down.
    For IT1028 you have to update via the RH_INSERT_INFTY.
    Kind Regards,
    Mukesh

  • Reading Incumbent and Position data in SuccessionPlanning

    Hi All:
    I'm wondering if anyone else has experienced an issue with the SuccessionPlanning module where the organizational hierarchy can be viewed, and the position/holder names are displayed in the hierarchy view.  However, when clicking on the position/holder for more information, the view details pane that comes up is unable to display little to no information about the holder or the position.
    So, for instance, if I were to click on the Position box for the Janitor position which was held by John Doe, the pane that opens up for more details the position and the incumbent lists his name as "n/a  n/a".
    I likely have a broader issue, because my searches for all positions and all talents yield no results and the log file tells me the dataset brought back no results which just isn't possibe, but I'm a little stumped because I HAVE actually connected to SAP with my connection string and am able to retrieve some data.  For instance,  I can see that the position Janitor is connected to job Custodial Enginner, which reflects ECC.  However, if I go to change the job the position is tied to directly in Nakisa, I can't get any jobs to show up in the dropdown for jobs. 
    The ID I'm using in my connection string is able to retrieve all this data if I were to log directly into ECC.
    Anyway, that's kind of a lot of info and I see most of the questions on here are about the OrgChart module, but since I'm a little stumped, I thought I'd give it a shot.  If anyone has come across this issue before, I welcome any feedback you can offer.  I'm using TVN 2.0 on ECC 6.0 ehp4.
    Thanks,
    Chris

    Chris,
    I would strongly recommend installing Service Pack 1 (SP1) for SAP TVN 2.0 before you do anything more (especially if you haven't done any customisations yet).  There is some very significant fixes in there.
    You will find this on service.sap.com/support then follow:
      SAP Support Packages ->
      Support Packages and Patches - Entry by Application Group ->
      SAP Solution Extensions by Partners ->
      SAP Talent Visualization by Nakisa -> .... sure you can follow the rest from there.
    There is a zip file with code and a PDF install guide in.  Just follow the steps, it will take you 1-2 hrs I guess.
    Hope that helps.
    Stephen
    [ROC|http://www.roc-group.com]

Maybe you are looking for