Org.jboss.mq.SpyJMSException: Cannot authenticate user;

JBoss 3.2.1 (also seeing the same problem on 3.2.5)
Java 1.4.1_05
The following Exception is thrown when a client (external to my firewall) attempts to createTopicConnection():
org.jboss.mq.SpyJMSException: Cannot authenticate user; - nested throwable: (java.net.ConnectException: Connection timed out: connect)
When I used a packet sniffer on a client machine, I noticed the Client was trying to connect on the server's internal IP address, which obviously is an unresolvable address to external clients.
Where should I configure JBoss to force the client to create connections on the external address?
After some research, I have seen one suggestion:
run.bat --host=<your-host-or-ip-address>
which has not helped me.
Of course, clients within my firewall have no problems.
Any suggestions?
Regards,
AE

HI
I am the same problem so that please tell me how tom solver if you have been worked.

Similar Messages

DAC 10.1.3.4.1 Services not starting up|| Error "cannot authenticate user"

Hi,
We have installed DAC server in Linux machine and client on windows. By using DAC client we restored the backup of DAC repository, DAC client was working fine still restoration and after restoring it’s not logging in. It throws error like "Can't authenticate user"
while starting DAC services in Unix server it throws an error like
ANOMALY INFO An exception occurred. Shutting down server...
MESSAGE:::/u01/DAC/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
EXCEPTION CLASS::: java.lang.UnsatisfiedLinkError
Note: since DAC client is not separately available for windows we have installed dac server also and while installing and after installing we never configured to connect to the dac server which is in Linux, we have configured only DB.
we have successfully installed OBIEE, Informatica, and DAC version is 10.1.3.4.1.
How to start the DAC services?
How to configure dac client to connect to DAC server and how to solve this "Can't authenticate user" issue?
Pls help in this regard.

After your config try to restart dac11g server
dac10g is only desktop mode
~ http://cool-bi.com

ACE-4710 : Device Manager on Primary ACE cannot authenticate

Hi,
In a cluster of redundant ACE-4710, version A5(1.2), the graphical Device Manager on the primary ACE cannot authenticate users. An error message is displayed :
The strange thing is that the standby ACE Device Manager work correctly. Moreover, both ACE are perfectly synchronized :
CH01AC03/P-115-A# sh ft group summary
FT Group                     : 14
Configured Status            : in-service
Maintenance mode             : MAINT_MODE_OFF
My State                     : FSM_FT_STATE_ACTIVE
My Config Priority           : 200
My Net Priority              : 200
My Preempt                   : Enabled
Peer State                   : FSM_FT_STATE_STANDBY_HOT
Peer Config Priority         : 150
Peer Net Priority            : 150
Peer Preempt                 : Enabled
Peer Id                      : 1
No. of Contexts              : 1
Here is the details on the ACE and DM version :
CH01AC03/P-115-A# sh ver
Cisco Application Control Software (ACSW)
TAC support: http://www.cisco.com/tac
Copyright (c) 1985-2012 by Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
loader:    Version 0.95.1
system:    Version A5(1.2) [build 3.0(0)A5(1.2) adbuild_19:38:58-2012/01/17_/auto/adbure_nightly4/renumber/rel_a5_1_2_throttle/REL_3_0_0_A5_1_2]
system image file: (hd0,1)/c4710ace-t1k9-mz.A5_1_2.bin
Device Manager version 5.1 (0) 20111215:1009
What coud be the problem ?
Thank you
Yves

Hello Yves,
Try with the command "dm reload" in the Admin Context
Cesar R
ANS Team

Windows AD cannot authenticate if BI platform UNIX?

We were eagerly awaiting BI4 SP04 to address several SAP integration issues including the requirement use Windows AD for single sign to SAP Enterprise Portal hosting BI4 content (dashboards/webis/Analysis for OLAP) and BEx Web analyzer, i.e. user logs on once for Windows to authenticate to all SAP systems, ECC, BW, BI, EP, etc.. We have no plans to use the BI Launch Pad.
We are on AIX 6.1 for BI4 SP04, NW 7.3.1 and EP and BW 7.3.1 and are working through Kerberos client on AIX to Windows AD and SNC and SSO in SAP...
Frankly we have been struggling for some time with issues on BI4 SP02 and NW 7.3 so we are frustrated when we came across the followg in SAP doc -
Business Intelligence Platform Administrator Guide.pdf (http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_bip_admin_en.pdf)
Page 211
The Windows AD security plugin cannot authenticate users if the BI platform server components are running on Unix
Page 212
Windows AD with Kerberos is supported if the Java application is on Unix. However, BI platform services must run on a Windows server.
Can someone clarify these statements? We will install Java application (NW? BI Java?) on UNIX. We will not run BI Platform? services on Windows.
If our requirement is to have a user only logon once to Windows and access BI4 content in the SAP Portal, not the BI Launch Pad, MUST we run BI4 on Windows?
Sincere thanks for your time and thoughts,
Lee Lewis
Summit Electric Supply
ASUG EDW and BO SIG Volunteer - Market Leader
[Email address removed. Please see the rules of engagement. The forum Administrator]

Hi Ainsley,
A work around? Yes and no and sort of ...kind of...
This turns out to be quite complex and tempermental.
In short, you cannot use Windows AD authentication, but instead use LDAP (with the Microsoft Active Directory). We were able to get this to work with much effort. The biggest limitation is that it supports a single AD forest.
I am giving a presentation on silent single sign on for BI4 and Enterprise Portals at the SAP BO User Confernce in Orlando and will see about posting the slides after the conference, but can share some of the resources here that we found to be most useful. Please reach out to me if I can help further.
Lee Lewis
•Integrating SAP BusinessObjects BI Platform 4.x with SAP NetWeaver, Ingo Hilgefort, SapPress 2011
•Configuring LDAP Manual Authentication and SSO for BI4 on Unix
•1631734 - Configuring Active Directory Manual Authentication and SSO for BI4
•Business Intelligence Platform Administrator Guide, SAP BusinessObjects Business Intelligence platform 4.0 Feature Pack 3, June 2012
•1670073 - How -To: Generate keystore and certificate in the process of configuring STS for SAP
•1687295 - How to configure Single Sign On (SSO) on the SAP Netweaver 7.x portal to BI4
•IBM - Configure single sign-on authentication on AIX
•1537480 - Best Practice: How To setup Active Directory Single Sign On when BOE CMS is on Unix or Linux
•Kerberos Explained - Microsoft Technet
•SAP Help - Secure Network Communications (SNC)
•Using Kerberos Authentication for Single Sign-On
•SAP Netweaver 7.3 Configuring Kerberos Authentication
•SAP BusinessObjects BI4 Active Directory SSO Tutorial
• 1631734 - Configuring Active Directory Manual Authentication and SSO for BI4
•1245218 - How to connect the LDAP plugin to Active Directory
Lee Lewis

SEEBURGER AS2: AS2 Adapter failure - Cannot authenticate the user

Hello,
All was working fine but now I got these errors in an AS2 scenario. Sending a message via AS2. Also we don't receive any messages via AS2 anymore. This is the error when sending a message:
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user.
MP: Exception caught with cause javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user.
Exception caught by adapter framework: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user
Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user.: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure.
Please advice, many thanks!
Erik

Are you using the "Use Authentication" option in the communication channel? If yes, then ensure that the user provided is correct and is not locked. Also recheck the authentication certificate settings.
Regards,
Prateek

Samba Users Cannot Authenticate?

I just want to start this thread by saying samba makes me want to kill myself. I love it so much, that it makes me want to rip my heart out and feed it to stray dogs every time I need to write a new configuration. Because I truly hate configuring it. Ok, with that steam having been blown off, let's jump into the problem I've been chasing for hours.
My users cannot login to samba shares. Simple as dirt. Every single time I access the shares as a user, I am prompted for my password, I enter my password, and the prompt immediately asks me again, as if I've entered the wrong password.
Heading off the obvious: Yes, I've added samba users with pdbedit -a -u [username]. The unix permissions on the folder I am trying to access as a samba user are 755, and I am trying to access the folder as its owner. My server smb.conf is included below.
[global]
workgroup = WORKGROUP
passdb backend = tdbsam
netbios name = ArchServ
name resolve order = bcast host lmhosts wins
server string = ""
printing = cups
printcap name = cups
printcap cache time = 750
cups options = raw
use client driver = yes
map to guest = Bad User
local master = yes
preferred master = yes
os level = 65
usershare allow guests = Yes
usershare max shares = 100
usershare owner only = False
security = share
#username map = /etc/samba/smbusers
[printers]
comment = All Printers
path = /var/spool/samba
create mask = 0700
guest ok = Yes
printable = Yes
print ok = Yes
browseable = No
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
[Home - user1]
comment = Deyla's Home folder
path = /home/user1
create mask = 0755
guest ok = yes
browsable = yes
write list = user1
public = yes
[Home - user2]
comment = James' Home folder
path = /home/user2
create mask = 0755
guest ok = yes
browsable = yes
write list = user2
public = yes
[Transmission Home]
comment = Torrent downloads
path = /home/transmission
create mask = 0775
guest ok = yes
browsable = yes
write list = user1 user2
public = yes
They work flawlessly as guest shares, and I have no problem gaining access... but when I try to log into a share as a user, the user will absolutely not authenticate, and it is the most frustrating, puzzling enigma to me. I formerly had this very samba configuration on an Ubuntu file server, and had no problems with the share behaving exactly as I wanted it to. I cannot for the life of me figure out why my users cannot authenticate.
Please help! Any and all tips are appreciated! Thank you in advance!

Thanks to Swerdina over at the OpenSUSE forums, I was able to solve my samba issue (thread). In a nutshell, my problem was the last active line in my [global] stanza, which was set to "security = share". By setting this global setting to "security = user" it fixed my problem and now allows me to invoke my shares with user privileges if I so choose to. Hopefully this helps someone who may have had a similar problem.

Users cannot authenticate

Hello
I recently had a lot of errors on two ML servers actinbg as OD Master/Replica, so decided to reinstall from scratch. One is running OS X 10.8.2, the other 10.8. Both are vanilla installs (going so far as to recreate the RAID), and both have the latest version of server.app installed.
Network users cannot authenticate.
Running slapconfig -ver gives the following errors on both machines:
bubbles:~ administrator$ sudo slapconfig -ver
2012-11-27 20:17:31 +0000 command: /usr/libexec/slapd -T cat -c -f /etc/openldap/slapd.conf -s ou=macosxodconfig,cn=config,dc=test249,dc=home
2012-11-27 20:17:31 +0000 Error execing slapcat: 50b51fdb /etc/openldap/slapd_macosxserver.conf: line 303: unknown directive <TLSCertificatePassphrase> inside backend database definition.
          slapcat: bad configuration file!
LDAP Setup Tool (slapconfig), Apple, Inc., Version 1.2
Obviously ou=macosxodconfig,cn=config,dc=test249,dc=home is wrong, but I don't know where this setting is held to correct it to ou=macosxodconfig,cn=config,dc=server,dc=domain,dc=tld
Opeining slapd_macosxserver.conf shows the last four lines to be:
TLSCertificateFile      /etc/certificates/server.mydomain.LONGHASH.cert.pem
TLSCACertificateFile    /etc/certificates/server.mydomain.LONGHASH.chain.pem
TLSCertificateKeyFile   /etc/certificates/server.mydomain.LONGHASH.key.pem
TLSCertificatePassphrase        "Mac OS X Server certificate management.LONGHASH"
I can 'fix' the second error by commenting out that last line. But that just results in a new and exciting error:
bubbles:~ administrator$ sudo slapconfig -ver
2012-11-27 20:43:00 +0000 command: /usr/libexec/slapd -T cat -c -f /etc/openldap/slapd.conf -s ou=macosxodconfig,cn=config,dc=test249,dc=home
2012-11-27 20:43:00 +0000 Error execing slapcat: slapcat: slap_init no backend for "ou=macosxodconfig,cn=config,dc=test249,dc=home"
LDAP Setup Tool (slapconfig), Apple, Inc., Version 1.2

Hi
i get the same error but authentication still works.
Are you sure that the recovery of your password worked ?
In case I have this issue i can only authenticate as a local user, not as an opeddir user.
This user must have admin rights to make sudo, afaik.
But it is interesting that my error comes on line 302 and yours on line 303.
Below i have attache the auth part from my /etc/openldap/slapd_macosxserver.conf
Check for any difference.
macmini:~] user% sudo slaptest -f /private/etc/openldap/slapd.conf -v
Password:
52054639 /etc/openldap/slapd_macosxserver.conf: line 302: unknown directive <TLSCertificatePassphrase> inside backend database definition.
slaptest: bad configuration file!
# authdata database definitions
database        bdb
suffix          "cn=authdata"
rootdn          "uid=root,cn=users,dc=macmini,dc=domain,dc=TL"
directory       "/var/db/openldap/authdata"
checkpoint      128 1
index           default eq
index           objectClass eq
index           authGUID eq
index           entryUUID eq
index           entryCSN eq
index           draft-krbPrincipalAliases eq
index           draft-krbPrincipalName eq
timelimit 60
idletimeout 300
cachesize       20000
idlcachesize    10000
sizelimit size.pr=11000 size.prtotal=unlimited
#limits          set="computer/cn & [cn=com.apple.opendirectory.group,cn=computer_groups,dc=macmini,dc=domain,dc=TL ]/memberUid" time.soft=unlimited time.hard=unlimited size.soft=unlimited size.hard=unlimited
access to *
                by dn.exact="uid=_ldap_replicator,cn=users,dc=macmini,dc=domain,dc=TL" write
                by sockurl="ldapi://%2Fvar%2Frun%2Fldapi" write
TLSCertificateFile      /etc/certificates/macmini.D5473ED3099C09ACE59C2944EA9FDDFC024DC07.cert.pem
TLSCertificateKeyFile   /etc/certificates/macmini.D5473ED3099C09ACE59C2944EA9FDDFC024DC07.key.pem
TLSCertificatePassphrase        "Mac OS X Server certificate management.D5473ED3099C09ACE59C2944EA9FDDFC024DC07"
TLSCACertificateFile    /etc/certificates/macmini.D5473ED3099C09ACE59C2944EA9FDDFC024DC07.chain.pem

ACS cannot Authenticate Aironet Users against Exernal DB (LDAP)

ACS cannot Authenticate Aironet Users against Exernal DB (LDAP)
Can anyone point me to a technical explanation of why this is true?
All I have found so far is one small note in a help file and something that might be related under EAP-FAST explanation.
I have posed this question to our Cisco account team but no response yet.
Just need to have a good explanation when explaining to mgmt why we need to have a special setup for WLAN users.

Hmmm....you should be getting more than that from debug radius and debug aaa authen if your AP is truly attempting EAP authentication. The debugs I generally use for this are 'debug aaa authen', 'debug radius', and 'debug dot11 aaa dot1x all' coupled with gathering the detailed support logs from ACS. A warning about 'debug dot11 aaa dot1x all'....it is VERY verbose and cryptic if you don't have alot of experience looking at it so it may be best to open up a TAC case. With these debugs turned on, you should see an EAPOL logon show up from the client (usually says 'received EAPOL packet...') and then a request for identity from the switch and a response from the client with a username and password. Then a series of RADIUS challenge/response packets will be passed which consists of the server cert being passed to the client for validation and then the client sending the username and password to the server. Then you will finally get an access-reject or access-accept packet from the RADIUS server. The failed and passed attempts logs in ACS can also provide good info as to what the source of the failure may be. Do you get any passed or failed attempts for these authentications?

Javax.security.auth.login.LoginException: Cannot authenticate X509(Urgent!)

I'm trying to sign my messages between client & webservice using X509 certificates. I've created a keystore and imported:
privatekey1, certificate1(public key) and trustedCertAuthority that published certificates.
I've configured webservice & client to use that keystore and privatekey1 to sign request/response, but web service keeps throwing following exception:
javax.security.auth.login.LoginException: Cannot authenticate X509 certificate, User EMAILADDRESS=[email protected], CN=testUser, ... does not exist in our system
How can I configure web service to find that certificate?
Thnx for help.

Yes, I did. I found the problem..
I had also checked to Authenticate with X509 certificate... and obviously I should somehow set the Securtiy provider, although, I don't know how (but it's not so important right now).
But I do have another question - how can I use private key & public key in certificate X509 to encrypt messages. In the sample you mentioned, it's written that there shoud be separate key for signature & encryption, but I have separate keystores for client (with client private key & server public certificate) and for server (with server private key & client certificate). But I can't get it to work... It seems to me that in that case signature key alias at service should be the same as key needed to decrypt the message?
Am i missing something again?
Thanks.

SOLVED: "AuthenticationSupport service missing. Cannot authenticate request."

A customer was installing CQ5 on a Red Hat Linux environment, and getting the following error displaying in the browser.
AuthenticationSupport service missing. Cannot authenticate request.
We checked the Felix Console, and all bundles were installed correctly.
We did however find the following message in the error log:
20.06.2012 10:49:26.689 *ERROR* [FelixStartLevel] org.apache.jackrabbit.core.RepositoryImpl failed to start Repository: Unable to register data store in cluster. javax.jcr.RepositoryException: Unable to register data store in cluster.
Caused by: java.net.UnknownHostException: {server name}: {server name}
This was not a clustered instance.
On closer inspection, the error was caused by an incorrect IP address entry for {server name} in the hostnames file
Tim Goodman

Hello Mkiti,
    I take a look there and my host file only contains comments :s
    Heres the content:
# Copyright (c) 1993-2009 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host
# localhost name resolution is handled within DNS itself.
#    127.0.0.1       localhost
#    ::1             localhost
    The error only happen after I install the CQ5 update fix, from package share. I just renamed the crx-quickstart folder, the CQ create a new one and works, but my projects still in the old quickstart :s Is there a way to physically copy these projects, maybe?

DAC server start-up error and Can't authenticate user

HI,
we have installed DAC server in Linux machine and client on windows. By using DAC client we restored the backup of DAC repository, DAC client was working fine still restoration and after restoring it’s not logging in. It throws error like "Can't authenticate user"
while starting DAC services in Unix server it throws an error like
ANOMALY INFO An exception occurred. Shutting down server...
MESSAGE:::/u01/DAC/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
EXCEPTION CLASS::: java.lang.UnsatisfiedLinkError
Note: since DAC client is not separately available for windows we have installed dac server also and while installing and after installing we never configured to connect to the dac server which is in Linux, we have configured only DB.
we have successfully installed OBIEE, Informatica, and DAC version is 10.1.3.4.1.
How to start the DAC services?
How to configure dac client to connect to DAC server and how to solve this "Can't authenticate user" issue?
Pls help in this regard.
Thanks in advance.

EddyLau wrote:
Hi,
I encounter the "Can't authenticate user" error in DAC first setup after installation when it prompt up to ask for setting up administrator id and password.
here's my sql statement to create database schema for dac in oracle database.
grant dba, connect, resource, create view, create session to SSE_ROLE;
create user DEV_DAC identified by "password";
grant DEV_DAC to SSE_ROLE;
grant dba, connect, resource, create view, create session, grant any role to DEV_DAC;
I tried dropping the data schema and create it again but still fail to authenticate.
did I grant enough privileges to the database schema?
Please help.
Thanks,
EddyLogin to DEV_DAC using the credentials from SQL Developer or sql
Then do select * from W_ETL_USER -- here you will see 2 Administrator id's listed
now run the command Delete From W_ETL_USER
Now login to dac client with Administrator and pwd which you have set earlier.
Mark as helpful or correct if it helps
Thanks,
RM

Error 413 Cannot Authenticate

I have about 10 VPN clients connecting to a Cisco ASA 5510. I am getting calls that sometimes people are getting 413 errors here and there. When they out it username and password, the dialog box pops up again and then they get a error 413 cannot authenticate. Any ideas, they are IPsec tunnels which I hae 250 available.

The easiest way to troubleshoot this would be to retrieve the debug information when the users fail to connect:
debug cry isa 200
debug cry ipsec 200
Though you gotta be careful when you enable the debug, if you have many IPSEC tunnels running, the ASA may resent showing all the debug information.
On release 8.0 there's a "debug crypto condition" command for you to choose only the debugs from the peer (you'll need to know the client's public address)
I would also suggest to try to get more information on the error: is it happening for ALL the users? it's happening always from the same location: home, office, etc?
Sometimes this "random" connection issues are related to delay/problems with the client's internet connection.
Regards,

Cannot add users to new domains anymore

I got messaging server and delegated admin to work just fine recently until I tried getting LDAP authentication to work so LDAP users could log into Sunrays.
I used idsconfig and saw that it added a bunch of stuff to the directory so I deleted that stuff after I realized I couldn't add users to a new domain anymore. It just says "cannot create user - unknown error". I can still add users to old domains just fine.
And I tried both DA and commadmin, neither work. Heres my Messaging server and DA version:
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)
SunOS testy.i-n-control.com 5.10 Generic_118822-25 sun4u sparc SUNW,Sun-Fire-V440
Delegated Administrator 6.3-0.09
I turned on debugging for DA and heres the output:
TRACE [Wed Aug 02 10:10:47 MDT 2006] Default people container = ou=People,o=domain,dc=mail,dc=example,dc=com
TRACE [Wed Aug 02 10:10:47 MDT 2006] ServerPushThread: setting stop flag
TRACE [Wed Aug 02 10:10:47 MDT 2006] commTaskManager: progress thread stopped
TRACE [Wed Aug 02 10:10:47 MDT 2006] com.iplanet.am.sdk.AMException: Unable to create entry.
     at com.iplanet.am.sdk.ldap.DirectoryManager.processInternalException(DirectoryManager.java:433)
     at com.iplanet.am.sdk.ldap.DirectoryManager.createUser(DirectoryManager.java:1046)
     at com.iplanet.am.sdk.ldap.DirectoryManager.createEntry(DirectoryManager.java:1525)
     at com.iplanet.am.sdk.AMDirectoryManager.createEntry(AMDirectoryManager.java:651)
     at com.iplanet.am.sdk.AMCacheManager.createEntry(AMCacheManager.java:337)
     at com.iplanet.am.sdk.AMObjectImpl.create(AMObjectImpl.java:1009)
     at com.iplanet.am.sdk.AMPeopleContainerImpl.createUser(AMPeopleContainerImpl.java:285)
     at sun.comm.cli.server.servlet.CreateUser.create(CreateUser.java:677)
     at sun.comm.cli.server.servlet.CreateUser.doTask(CreateUser.java:91)
     at sun.comm.cli.server.servlet.commTaskManager.execute(commTaskManager.java:196)
     at sun.comm.cli.server.servlet.commServlet.doPost(commServlet.java:90)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:807)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
TRACE [Wed Aug 02 10:10:47 MDT 2006] After AM Exception , msg being sent is Unable to create entry.^324^NONE
TRACE [Wed Aug 02 10:10:47 MDT 2006] in CLIPageData constructor:status = 1
TRACE [Wed Aug 02 10:10:47 MDT 2006] commTaskManager - execute => generateOutput
TRACE [Wed Aug 02 10:10:47 MDT 2006] In CLIPageGenerator ....
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput : cliData.status = 1
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput : CLIPageData.OK = 0
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput : CLIPageData.FAIL = 1
TRACE [Wed Aug 02 10:10:47 MDT 2006] Failed: Unable to create entry.^324^NONE
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput - Printing successfull results
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput - status => FAIL
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput - message => Unable to create entry.^324^NONE
TRACE [Wed Aug 02 10:10:48 MDT 2006] ServerPushThread: done
TRACE [Wed Aug 02 10:10:48 MDT 2006] ServerPushThread: done
TRACE [Wed Aug 02 10:10:49 MDT 2006] ServerPushThread: done
TRACE [Wed Aug 02 10:10:58 MDT 2006] sun.comm.cli.server.servlet.commLDAPAuth: shutting down. Total access count = 1
Message was edited by:
nate.wheeler

Frankly, I'm new to LDAP so I don't know really what
changed.No time like the present to start learning.
Its weird, I can do some things, but not
others. Like I can assign service packages, but not
change the login id or password of a user. So it
doesn't look like amadmin can't change things.LDAP provides "ACI", or Access Control settings that can be changed, and create exactly the kinds of things you're looking at.
The Directory Console can view ACI
>
The password encryption seemed to have changed from
{SSHA} to {CRYPT}. Although I have no idea how to
switch it back or where to look to see if it did.Unlikely to have made any difference. That should be transparent to the application using DS.
Most of our applications don't compare the password entry, but attempt a BIND for that very reason.
Again, I'd be looking at your LDAP access logs for a clue to what's happening.
>
Message was edited by:
nate.wheeler

"Cannot Authenticate the Phone" with IBM T60 and N...

Hello!
I've been reading through the various posts on the "cannot authenticate the phone" -issue, yet after uninstalling & installing BT stack & PC Suite various times my problem still persists. I've also followed every single piece of instruction I've found on uninstalling Microsoft BT stack, yet PC Suite still reports that it is available.
I can connect from my laptop to the dial-up networking service on the phone, and I am able to connect from the phone to the headset service on my laptop, so BT stack & pairing works ok; I am also able to synchronise the phone via IR => problem must be somewhere in the PC Suite's bluetooth sections.
Is there any flags to enable debugging level logs in PC Suite? I would SOOO MUCH like to see what the hell goes wrong in there.
Or is there *any* way of getting this to work??
Getting pretty tired with this..
Rgrds,
sakuvee.
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (United States)
Input language: Finnish
Nokia PC Suite:
Version 6.81.13.0
Language: English
Connectivity Cable Drivers:
Version 6.81.1.2
Microsoft Outlook:
Version 11.0
Build 8010
Bluetooth stacks:
Microsoft Bluetooth stack
Version 5.1.2600.2180
WIDCOMM Bluetooth stack
Version 5.0.1
Build 3200
BT device: Thinkpad Bluetooth with Enhanced Data Rate
BT firmware: Broadcom 2.1.92.108, HCI 2.0 206C, LMP 2.0 415C
BT driver: Broadcom, 1.8.2006, 5.0.1.3200
Phone: V 3.0617.0.6, 03-05-2006, RM-92, Nokia N80 (03)
---Message Edited by sakuvee on 19-Oct-2006
02:46 PM

OK - here's what I did to FINALLY get it working:
1) Uninstall PC Suite (from Add Remove Programs)
2) Uninstall Nokia Connectivity Solution
3) Remove C:\Documents and Settings\[uid]\Application Data\Nokia, ...\\Application Data\[uid]\PC Suite, ...\All Users\Application Data\PC Suite, C:\Program Files\Common Files\Nokia, C:\Program Files\Nokia. Basically all Nokia directories left behind by Nokia uninstallers.
4) Restart machine
5) Run PC Suite Cleaner (all options one at a time, except the diagnostics, don't restart although it recommends to do so)
6) Restart machine
7) Manually clean all typelibs, activex-objects, device-ids and other registry entries linking to or containing Nokia related stuff from registry using regedit.exe
8) Restart machine
9) Install PC Suite
10) Unpair phone (from laptop and from phone)
11) Run Get Connected Wizard

Cannot authenticate the phone

Version 6.86.9.3 of Nokia PC Suite fails with error message:
"Cannot authenticate the phone"
It does not matter what I try (rebooting unpairing/repairing, etc.) it does not work.
The previous version of the software worked fine.
My setup:
Phone: Nokia 6233
Windows 2000 Server
BlueSoleil Bluetooth USB key.
BlueSoleil 2.3.0.1 Release 060802
Stack Version: 05.04.11.20060622
I downloaded a very large update from Nokia, and upgraded for a better experience, however it resulted in a worse experience. I feel very bitter about upgrading.
Do Nokia even monitor these message boards? I've seen others with similar problems but with no solid answers from Nokia other than, "are you sure you plugged it in and paired it properly".

Yes, I have tried your suggestion and it did not work.
I have checked permissions using a sysinternals tools. There are no permission problems, although the following two files were modified during the failed connection attempt.
C:\Documents and Settings\All Users.WINNT\Application Data\PC Suite\ConfServer\Settings.xml
C:\Documents and Settings\All Users.WINNT\Application Data\PC Suite\ConfServer\Nokia;SuiteConf;RM-145;359727000098587.xml
I am curious to see how long it takes Nokia to resolve this error I am getting. I know I'm not the only one... and I'm not going away until it is fixed.

Org.jboss.mq.SpyJMSException: Cannot authenticate user;

Similar Messages

Maybe you are looking for