Org Management Data Migration

Hello everyone !!
   I am currently working of org data migration from legacy to SAP and using LSMW Recording for Infotype 1000, 1001, 1002 .....
    when I came across info type 1001 were I was creating Relations using recording i can easily do whole recording with out any problem, and then I saved this recording and provided source and structure fields.
   Problem I encountered at P1001-SCLAS in second screen of tcode PP02. where I have to enter " Type of related object ". its a list of selections where I have to pick one from a list, the value i pick here is description of what I upload from a text file. for eg: if I read the value of SCLAS : k or s, or c or o. then similarly I have to pick a description.
k = cost center, s = positions, c = jobs and o = org unit. depending of subtype I select a list of description is populated.
In P1001-SCLAS which is in the second screen of PP02. here comes the problem, this field is of only 2 character but on the screen I have to select a description which is obviously greater than 2 character.
   When I read file and convert data the converted data has only values picked from the file but not description.
Here is what I needed. How do I convert a 2 char field to a 12 or 15 character field in target table and how to select a single description from a list of descriptions.
Note: DTT is ruled out here. No chance of using DTT. But still you can add comments on DTT.
Thanks for any help.

I am using tcode PP02 and then entering values for
Plan Version,
Object Type,
Object ID,
Infotype,
Subtype,
Planning status, and
Validity.
Once I hit create icon "Create Relationships" screen comes up here I have to enter Type of related object, which I can select from a drop down list. This field is P1001-SCLAS. Which is of 2 characters, but when I see a drop down list its a description which is more than 2 characters. How can I populate values in this field using BDC or Recording. the value I am reading from a file for this field is k or s ... but same field has a drop down list with descriptions but not k or s...., its kind of hard for me to imagin how this field can be populated. When I run a session in SM35 I am getting an error in BDC session as " No batch input data for screen MP100100 2000 ".When I look Converted data in LSMW its k or s ... but not description this is obvious.
Thanks.

Similar Messages

Migrating HR Org Management data.... any help files etc.

Hi,
I am familiar with migrating HR master data, payroll data, NI data, i.e. infotypes etc.
I would like to know if anyone can give me a heads up on migrating Org management data, and positions data. Is there any abap involvement for this or is it purely a functional issue?
What are main transactions for this? Can it be done with lsmw? Is there a standard procedure for migrating org mgt data?
Any advice and assistance greatly appreciated.
Thank you.

I am using tcode PP02 and then entering values for
Plan Version,
Object Type,
Object ID,
Infotype,
Subtype,
Planning status, and
Validity.
Once I hit create icon "Create Relationships" screen comes up here I have to enter Type of related object, which I can select from a drop down list. This field is P1001-SCLAS. Which is of 2 characters, but when I see a drop down list its a description which is more than 2 characters. How can I populate values in this field using BDC or Recording. the value I am reading from a file for this field is k or s ... but same field has a drop down list with descriptions but not k or s...., its kind of hard for me to imagin how this field can be populated. When I run a session in SM35 I am getting an error in BDC session as " No batch input data for screen MP100100 2000 ".When I look Converted data in LSMW its k or s ... but not description this is obvious.
Thanks.

Solution manager Data Migration Solaris to AIX

Hi Gurus,
We are planning for migration our solution manager from Solaris to AIX .
I want to know the best method to do the migration.
We are currenlty on Solman 7.0 EHP1 SP23.
Please let me know if anyone has done this before or can suggest domething on this.
Dev

Hi,
You need to do heterogeneous system copy for this using sapinst.
Thanks
Sunny

Data Migration for Territory Management Data in CRM 7.0

We are currently upgrading from CRM 5.0 to CRM 7.0. I am trying to understand how the Territory Management Data Migration process is going to work. A requirement for us is to have all history from CRM 5.0 Territory Management available in CRM 7.0.
When executing program CRM_TERRMAN_DATA_MIGRATION, it appears that is is only creating a rule for the active atributes in CRMM_TERRATTRIB. How can rules be created for inactive attributes? Is it possible with the Data Migration Program?

You can consider a writing a custom program to migrate Territory attributes. You can use the FMs CRM_TERRMAN_SINGLE_READ_BUFFER, BAPI_TERRITORY_ATTR_CHANGE for that purpose.
Refer to my article below which may be useful-
http://www.divulgesap.com/blog.php?p=OTU=
Regards,
Ravikiran

Best practice for data migration install v1.40 - Error 2732 Directory manag

Hi
I'm attempting to install SAP Best Practice for Data migration 1.40 on Win Server 2008 R2 (64 bit).
Prerequisite error
Installation program stops with missing file error
The following file was not found
... \migration\InstallationWizard\BusinessObjects Data Services\setup.exe
The file is necessary for successful installation. Please connect to internet or refer to Quick Guide (available on SAP note 1527151) for information regarding the above file.
Windows installer log displays
Error 2732 Directory Manager not initialized
SAP note 1527151 does not exist or is internal.
Any help appreciated on what is the root cause of the error as the file does not exist in that folder in the installation zip file.
Other prerequisite of .NET 3.5.1 met already.
Patch is released since 20.11.2011 so I presume that it is a good installation set.
Thanks,
Alan

Hi Alan,
There are details on data migration v1.4 installations on SAP website and market place. The below link should guide to the right place. It has a power point presentation and other useful links as well.
http://help.sap.com/saap/sap_bp/DMS_V140/DMS_US/html/index.htm
Arun

Migrating SQL Management Data Warehouse to a new server

Is there a defined path for migrating a Managment Data Warehouse to a instance?
Does Microsoft provide any scripts for this? Is it a case of backing up and restoring databases to the new instance? And what about all the data collection sets running on the monitored instances? Do we have to re-point these to the new instance hosting
the MDW individually by logging on teach monitored instance? Or can we do this globally somehow?
Thanks.

Hi NiborTrassam,
Sorry the delay.
To migrate the Management Data Warehouse, you can back up the MDW database, and restore it on the new instance. Then, on the new instance, you need to start the Configure Management Data Warehouse Wizard to create a Management Data Warehouse based on the
migrated MDW database, as well as upgrade the login mapping if necessary.
On each instance that is monitored, you need to start the Configure Management Data Warehouse Wizard to setup new data collection to point to the MDW data warehouse on the new instance.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Manage Dispute Case after data migration

Dear all,
Iu2019m facing the following problem.
Iu2019ve all the Dispute case in a Financial Supply Chain System (APJ).
Customer Line Items are, instead, in the Financial System (AP3)
After a Data Migration, all my line item will be migrated in to a new system (BD3) but without the Dispute Case.
There is a a way to link massively items with Dispute Case or users must proceed one by one ?
Thanks in advance
Alberto

sounds like changing the ALE from system 1 to the other system.
However I doubt it will be that easy.
I believe that could should contact SAP SLO to work out the best route for data migration.

Data Migration using solution Manager

Hi All,
Is there any way to use solution manger for data migration.
Thanks in advance.
Regards,
Venkanna

Hi,
in case you want to use it as middleware to connect 2 systems then rather use SAP XI / PI. SolMan is not providing such a functionality!
Regards,
Kai

Data Migration for Open Purchase Order

Hi, All,
Is there anyone know how to Count the volume for Open Purchase Order. What's the normal strategy for the Data Migration and Cut-over stage?
My client want to know how many Open Purchase Order in the legacy system and then determine manual or automatic data migration. If manual, how to do? If automatic, how to do? Because all materials and vendors, plants are different number. How to track? How to find out to match between new and old?
Thank you very much

JC,
Sounds a bit early to be making decisions about the realization phase. It doesn't sound like you have finished the Blueprinting phase yet, much less the testing phase.
Anyhow, in my experience I typically use LSMW (Legacy system migration workbench) to load MM master data (material masters), Inventory (WIP, RM, FG, etc) Purchasing Master data (Vendors, Purchase Info Records, Source Lists, Quota Arrangements), and Purchasing transactional documents (POs, PurReqs, Scheduling Agreements, etc). Depending on the complexity and volume of data, it may be necessary to write custom programs to load the data. You will find this out during your requirements gathering.
It is uncommon but possible to load all of these data manually. I have never run across a client that wants to pay a consultant's hourly rate to sit at a terminal to peck away loading master data, so if the client intends to have his own users enter the data manually, the project manager should make provision that there will be qualified TRAINED client employees available for this data entry. I did help with a portion of a conversion once manually; of Sales Credits, but there were only about 30 SD docs to load. I did this the evening before go-live day, while I was waiting for some of my LSMW projects to complete in the background.
A good opportunity to 'practice' your data loads is right after you have completed your development and customization, and you have gotten the approval from the client to proceed from the pilot build to the full test environment. Once you have moved your workbench and customization into the client's test environment, but before integration testing, you can mass load all, or a substantial portion of your conversion data into the qual system. You can treat it like a dry run for go-live, and fine tune your processes, as well as your LSMW projects.
Yes, it is good practice to generate comparisons between legacy and SAP even if the client doesn't ask for it. For Purchase orders on the SAP side, you could use any of the standard SAP Purchasing reports, such as ME2W, ME2M, ME2C, ME2L, ME2N. If these reports do not meet the requirements of the client, you could write a query to display the loaded data, or have an ABAPer write a custom report.
You didn't ask, but you should also do comparisons of ALL loaded data - including master data.
It sounds like you are implying that the client wants YOU to extract the legacy data. For an SAP consultant, this is not very realistic (unless the legacy system is another SAP system). Most of us do not understand the workings of the myriad legacy systems. The client is usually expected to produce one or more legacy system technical experts for you to liase with. You normally negotiate with the technical expert about every facet of of the data migration. In addition, you will liase with business users, who will help you and the implementation team to logically validate that the final solution (turnkey SAP production system, fully loaded with data) will meet the client's business needs.
Finally, you mentioned how do you track the mapping of master data between legacy and SAP. There are many ways to do this. I normally try to get the legacy person do the conversion on his end, eg, when he gives you the load file, you would like to have already translated the master data and inserted the SAP relevant values into the file. If this is not possible, I usually use MS Access databases to maintain a master map, and I perform the mapping on a PC. If your data package is small, you can probably get by using MS Excel or similar.
Good Luck,
DB49

Data migration

Dear all my friends,
please help to share me about data migration before go-live FI system.
i plan to migrate GL acct balance, AP/AR open item and last 3 months historical data.
please help to show me : how should i do ?
thanks !

1. Normal GL Accounts: In this case line items are not required and totals are to be updated in SAP. This can be done using GL fast entry if the number is not too high.
2. Open Item Managed GL Accounts: All the open line items are required to be uploaded in SAP from Legacy in order to clear them. Hence, a LSMW / BDC program has to be developed to upload the line items.
BAPI_ACC_DOCUMENT_POST - for GL/AP/AR
BAPI_ACC_INVOICE_RECEIPT_POST - for AP
BAPI_ACC_GL_POSTING_POST - for GL
GL Balance
F-02 or RFBIBL00 or BAPI
Dr GL a/c Credit Data migration Account or Clearing Account
3. Customer & Vendor Open Items: All open line items in Customer and Vendor Accounts have to be brought in into SAP. For this also a LSMW / BDC program needs to be developed and upload the line items.
Vendor Balances
F-02 or RFBIBL00 or BAPI
Credit Vendor a/c (individually) and Dr Data migration Account or Clearing Account
Customer balances
F-02 or RFBIBL00 or BAPI
Dr Customers a/c (individually) and Dr Data migration Account or Clearing Account
4. Asset Accounting: In case asset accounting is implemented the individual balances of each asset (Gross Value and Accumulated Depreciation) have to be uploaded using transaction AS91. For this also you need to develop a LSMW / BDC program. Further, you also need to update the GL Accounts related to Asset Accounts with totals for each asset class T.Code OASV.
For uploading the Assets
AS91 -> for uploading assets in AA
OSAV --> for uploading assets in GL entry Dr Asset (individually) Cr Data migration Account or Clearing Account
You can use LSMW for uploading all these things
After uploading all, your data migration account will become zero

Data Migration From Peoplesoft , JDEdwards To SAP.

Hi,
This is kiran here we are doing data Migration work from Peoplesoft And JDEdwards to SAP.in SAP side it involves Master data tables Related to Customer, Vendor, Material. and Meta data tables related to SD, MM, FI. We as SAP Consultant identified Fields from above tables and marked them as Required, Not required, And Mandatory. The Peoplesoft and JDEdwards flocks come up with the same from their side. Then we want map the Fields. as I am new to data Migration any body suggest me what are the steps involves in data Migration How to do Data Mapping in Migration Thanks in advance.
Thanks
Kiran.B

Hi Kiran,
Good... Check out the following documentation and links
Migrating from one ERP solution to another is a very complex undertaking. I don't think I would start with comparing data structures. It would be better to understand the business flows you have currently with any unique customizations and determine how these could be implemented in your target ERP. Once this is in place, you can determine the necessary data unload/reload to seed your target system.
A real configuration of an ERP system will only happen when there is real data in the system. The mapping of legacy system data to a new ERP is a long difficult process, and choices must be made as to what data gets moved and what gets left behind. The only way to verify what you need to actually run in the new ERP environment is to migrate the data over to the ERP development and test environments and test it. The only way to get a smooth transition to a new ERP is to develop processes as automatic as possible to migrate the data from the old system to the new.
Data loading is not a project that can be done after everything else is ready. Just defining the data in the legacy system is a huge horrible task. Actually mapping it to one of the ERP system schemas is a lesson in pain that must be experienced to be believed.
The scope of a data migration project is usually a fairly large development process with a lot of proprietary code written to extract legacy data, transform and load the data into the ERP system. This process is usually called ETL (extract, transform, load.)
How is data put into the ERP?
There is usually a painfully slow data import facility with most ERP systems. Mashing data into the usually undocumented table schema is also an option, but must be carefully researched. Getting the data out of the legacy systems is usually left to the company buying the ERP. These export - import processes can be complex and slow, sometimes specialized ETL tools can help, sometimes it is easier to use what ever your programmers are familiar with, tools such as C, shell or perl.
An interesting thing to note is that many bugs and quirks of the old systems will be found when the data is mapped and examined. I am always amazed at what data I find in a legacy system, usually the data has no relational integrity , note that it does not have much more integrity once it is placed in an ERP system so accurate and clean data going in helps to create a system that can work.
The Business Analysts (BAs) that are good understand the importance of data migration and have an organized plan to migrate the data, allocate resources, give detailed data maps to the migrators (or help create the maps) and give space estimates to the DBAs. Bad BAs can totally fubar the ERP implementation. If the BAs and management cannot fathom that old data must be mapped to the new system, RUN AWAY. The project will fail.
Check these links
http://pdf.me.uk/informatica/AAHN/INFDI11.pdf
http://researchcenter.line56.com/search/keyword/line56/Edwards%20Sap%20Migration%20Solutions/Edwards%20Sap%20Migration%20Solutions
http://resources.crmbuyer.com/search/keyword/crmbuyer/Scm%20Data%20Migration%20On%20Peoplesoft%20Peoplesoft%20Data%20Migration/Scm%20Data%20Migration%20On%20Peoplesoft%20Peoplesoft%20Data%20Migration
Good Luck and Thanks
AK

I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

If you migrated all the info from time machine to your new MBP. The TM will usually ask to connect to the old backups.. sorry I am not sure is this what you want to do.. Personally I think you start a fresh backup.
BTW Time Capsule does not do anything.. it is a dumb hard disk in a box.. it is TM that does everything.
Look at B5 and B6 here about connecting to your backup.
http://pondini.org/TM/Troubleshooting.html

Org managament -Cost Center- Position

Hi Experts,
There is a clarification required, I am creating Jobs,Positions from 01.01.1900 upto 31.12.9999 and the FI consultant has created his Cost centers mentioning the date as 01.04.2009. As se says that I need to mantain the cost center creation dates only 1 year prior to GO-LIVE date.
Now the problem is when I am creating one of the Positions in the Account Assignment tab details and its Cost distribution tab in Org Managment with PPOCE transaction, by assigning the positions relevent Cost Center where he falls to....the system throws and error stating that Cost Center not maintained on 01.01.1900 as it is the matter of that cost centers have been created only from 01.04.2009.
So, now can any of you let me know how myself and FI consultant need to resolve this issue?
Best Regards,
KishoreJ.

Hi,
So, I would go ahead and create Jobs & Positions according to Cost Center dates. Can you please clarify me with one thing is
Now If I create the Jobs & Position of the date from which Cost Centers have been created in my case 01.04.2009, will I be able to hire an employee with the created Jobs & Positions with previous date like for example an employee is working with Organization from 01.01.2003 till date as when I do hiringaction, system asks me for joining date, so mentioning his joinning date as 01.01.2003 and maintain all the Org data with Account Assignment, Cost Distribution as per the relevent dates.
Thank You,
KishoreJ.

Data Migration from R3 to new ECC System

Hello,
We are doing a fresh implementation for SAP MDM. Currently we have 3 SAP R/3 systems and 1 non-R3 system (BPCS system). One of the project goals is to do data migration from all these 4 systems into a new SAP ECC system and to MDM for Vendor Master, Customer Master and Material Master. My manager says that we need Business Objects tool to Migrate these data. But, my question is that is it not possible to achive this through XI/PI itself ? Can anyone let me know the entire process in XI/PI as to how do I receive the Idocs from R/3, convert into XML and then send it to the new ECC system in Idoc format ?
Thks & Rgds,
Hema

Hi Gandhi,
You have SAP MDM, BPC and R/3 systems in your landscape, when you are migrating data to new ECC system, what is the role of mdm, did you moving the same data to MDM to avoid duplicate/redundant data??is there any data migration from R/3 to MDM(any integration required)or MDM to R/3,
You have to develop different interfaces to transfer data from MDM to ECC, BPC to ECC.definelty you required one middleware, the option definitely SAP PI. it offers very easy of integration between MDM and R/3 system, you can use MDM-PI adapter to connect to directly MDM syndicator file port from there you can pull the XML file and convert it in to IDoc format use Receiver IDoc adapter in PI, the same way we can integrate BPC system with R/3.
Search in sdn, there are some scenarios integration of R/3 and MDM using PI, refer those links, if still you have any doubts let me know,
Regards,
Raj

What kind of data migrate to CCM 5.0??

Hi,
I´ve read many documents about Data Migration Assistant (DMA) and i have some doubts about it. In our company each telephone user handles speed dials, services associated to telephone and own book telephone. i`m completly sure that speed dials are migrated with DMA, but services and books telephone too???
I don´t know if when in cisco documentation says Call Manager data it´s refering to all kind of datas.
thanks to all.

Anyone???

Org Management Data Migration

Similar Messages

Maybe you are looking for