Org. Mgmt: How to assign bp to a chief of Org.Unit

Hi all.
In Crm_dno_service_moniter we have checkboxes.
Checkbox "My department" is not working...
In ppoma_crm i have a chief of organization ( marked flag "head of own org. unit" ) and got some bp's below chief.
But i can't find how i can assing bp directly to a CHIEF...
To use then checkbox "my department".
Regards Sindry.

Hello Sindry,
i do not really understand your problem, can you specify what you did please.
One example how it works for me:
1 Organizational Unit with 2 Positions, one of them is marked as "head of own org. unit".
My BP is assigned to the "head"-position, a few others to the "normal"-position (just drag and drop....).
When i check "My department" in CRM_DNO_MONITOR, i see all messages where the BPs of the "normal"-position are assigned.
Best regards
Daniel

Similar Messages

How to Assigning the company code to the billing units from ecc to crm

Hi,
Iam doing the roll out project , i require the help.
can any one suggest me how to assign the company code to the billing units from ecc to crm.
Thanks
Mustafa

Hi Mustafa
You can load this data from R/3 to CRM by going to transaction R3AS in your CRM system, and using load objects EQUIPMENT, MATERIAL, and CUSTOMER_MAIN.
Best Regards
Gavin

Org Mgt-How to assign person for positions in bulk

Hi Gurus
Let any one share how to Assign persons to position in bulk manner
i have tried lsmw program but not working properly.using ppom_old it is too difficult to assign for 250 persons.let any one sap hr doctor give me medicine to sort out this issue
with regards
partha

Hi
Very helpful sir
and nicely worked
keep sharing and mould sap aspirants like me
with regards
partha

How to assign default values to fileds in the org. tab of an oppurtunity

hi Experts,
I created a new org data profile and assigned it to a transaction type.
The org. tab consists of
org. unit
sales Org.
Distribution Channel
Sales Office
Sales Group
out of which first four are mandatory.
Now I need to populate "10" in the distribution channel field irrespective of whoever logfs in.
At present a list of sales offices and distribution chaneel popups up for selection by the user.
In my business scenario, I don't want the distribution channel to be taken from there instead it should hold a default value "10".
Pls help me in this.
regards,
Arul jothi.A

Hi Arul,
You can implement BADI 'CRM_ORGMAN_BADI' to populate the distribution channel field by default.You are to code in the method 'CRM_ORGMAN_MERGE' . The code you will have to write for defaulting value will be something like this :
CODE :
method IF_EX_CRM_ORGMAN_BADI~CRM_ORGMAN_MERGE.
data : lv_guid type CRMT_OBJECT_GUID,
       lv_process_type type CRMT_PROCESS_TYPE.
finding the process type *****
lv_guid = is_orgman_wrk-REF_GUID.
CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
EXPORTING
    IV_ORDERADM_H_GUID               = lv_guid
IMPORTING
   EV_PROCESS_TYPE                  = lv_process_type
EXCEPTIONS
   ADMIN_HEADER_NOT_FOUND           = 1
   OTHERS                           = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*********defaulting value if process type is opportunity(OPPT)
if lv_PROCESS_TYPE = 'OPPT'.
cs_orgman_badi-DIVISION = '10'.
endif.
endmethod.
Hope this solves your problem.
Regards,

How to assign work centre in OM

Hi,
In organizational structure how to assign work centre.
it is necessary to assign cost centre to org structure.how ?
President has to be given personnel no.?
if employee is reporting to two superiors of different depts or different regions ,how the employee should be placed i.e dual reporting?
Urgently reply.
Thks
Archana

Hi Archana,
1. To assign Work Center the T-code is PO01.
2. Yes. In SAP HR every employee has to be given Personnel Number irrespective of their designations.
3. No its not possible according to me (Gurus Pls correct me too if I am wrong)
Hope above answers are helpful to you.
Regards
Pavani
Remainder: Points to be given on answered.

How to assign BP to BP?

Dear all,
I created a organization model having a ornganization unit (Marketing Div)
Now i assigned Marketing Manager (Mr XXX) to the Organization unit.
now i have two employees under marketing manager in same organization unit.
Can any body guide me how can assign employee(Sale Exes)to the marketing manager??
Regards
jayesh

Hi Jayesh
You cannot maintain Employee hierarchy in CRM, but you can maintain only different positions at different levels. When you assign emplyees to a position, the employees will have a User id assigned to them which will determine who is what (referring to HR structure)
My suggestion is create different positions at the same level of organizational unit, that doesnt mean one is superior/ subordinate than other (Unless you have different Org Hierarchies)
But if you have a situation where you will have to use employee hierarchy (example:" workflows) you will have to assign more attributes at each position like approval amounts or any other differentiation rules in which case again it has to refer to HR structure by thier ID's given in the BP record
Hope this helps

ECM- how to assign amount to the budget structure ?

Hi,
I'm new to Enterprise Compensation Management (ECM Module).
I need to know how we create a budget structure for org units? How we assign amount to the budget structure.
I found one program 'RHECM_BUDGET_GENERATE' which generates the budget structure, but it doesn't assign the amount. So how to assign the budget amount. Which transaction we use for the same ? or Is there any FM which assigns the amount to the budget structure? I am trying to enhance the program 'RHECM_BUDGET_GENERATE' so that it assigns the budget amount also.
Thanks in advance,
Shrinivas

I'm fuming! Same problem as I like to manually assign location data, esp as I just imported lots of old photos which I recently found on an old drive. They are now on new Photos app, but iPhoto, otherwise I would use the latter to assign geo data as before. It seems very complicated but maybe I could delete from iPhoto, somehow import in to iPhotos, then import from iPhoto to Photos. Would that work?
Lots of my photos have ALSO lost their geo data and their face data due to the fact that somehow my new "Photos" library suddenly decided to put 4000 odd duplicates in the new library imported from iPhoto. I then ran a duplicate-finding application in the new photos library, managed to remove most of the duplicates, however most of the photos that then remained had lost their face data which took ages to put on in the first place!!! (Perhaps the ones I deleted had the location nd face data I wanted and the software kept the duplicate version. I don't know...)
Plus I am having a nightmare with the new automatic uploading photos to icloud application that runs in the background if enabled.. It says its still uploading but doesn't appear to have got past a thousand in last few days and just 'stuck' on this amount, despite saying it is uploading automatically. My iOS devices only show a fragment of what is on my mac.
O well!

API to assign a Supplier Site to Multilpe Org's

Hi ,
Is there any API to assign a Supplier Site to Multiple Orgs. I know there is a provision in the Supplier screen to assign the Supplier site to multiple orgs. But is this possible through an interface or API since i have over 1000 suppliers and supplier sites.
Thanks,
Vivek

Hello Sindry,
i do not really understand your problem, can you specify what you did please.
One example how it works for me:
1 Organizational Unit with 2 Positions, one of them is marked as "head of own org. unit".
My BP is assigned to the "head"-position, a few others to the "normal"-position (just drag and drop....).
When i check "My department" in CRM_DNO_MONITOR, i see all messages where the BPs of the "normal"-position are assigned.
Best regards
Daniel

Plant assignment to more than one sales org

We have a business process where certain products made in one plant have to be sold to two sales organizations depending on certain conditions defined in the sales view of the material master. How can this be achieved? Currently system does not allow for plant assignment to more than one sales org?

Hi,
Have you checked in OVX6 ? You can assign a given plant to different Sales Org. - Distribution Channel.
Select the Sales Org. - Distbn. Channel, click on Assign & in the pop-up box select the plant.
Regards,
Vivek

How to Assign a Multiple Sales organization to one product ?

Dear All,
I have assigned multiple sales org. to one product in product master. For ex:
Sales org. 1 ,2,3,4 & 5.
During the campaign creation If I select the same product for sales org. 1 it shows no error.
If I put sales org.2 it shows warning message saying that Product is not assigned to Sales org. 2.
But I have assigned all 5 sales org in the product master, however only one SO(i.e.SO1) is active at one time.
How to assign multiple SO to one product ?
kindly send your valuable input.
Regards
Pramod

It must be looking at the sales org at the header level. Change the sales org at the header level to sales org 2 and try adding the product for the same sales org 2. I think it will work fine now.

How to assign numbers in external number range?

Dear experts,
Since NUMBER_GET_NEXT can only be used to assign numbers in internal number range, how to assign numbers in external number range?
So far, I only know the NUMBER_CHECK function module to deal with external number ranges and it only check a number whether it lies in any external number range or not, but it doesn't update any number range status. What I need is a function module like NUMBER_GET_NEXT that supports external number range.
Thanks in advance.
Regards,
Haris
Edited by: harissahlan on Oct 19, 2011 5:44 AM

With external number range, there is no updating of the number range objectt. The only thing you need to know is whether the number you wish to assign is allowed according to the external number range. And also check if there isn't already an object/document with the same number in the database.

How to assign a task to Reuestor in OIM 11g

How to assign a task to a requestor (who has raised a request for other user).
I created a Task assignment adapter and mapped variable in Process definition as
Map To: Request Info
Qualifier: Requester User Login
Still it returns null and default task is assigning to System adminstrator. I am pasting the Task Assignment code here. User key value coming as Null.
Do you have any idea what is the exact mapping required in Process definition.?? Pls note: I am using OIM version 11.1.1.5.0
public class TaskAssignmentToUserAdapter {
     Logger logger = Logger.getLogger("COM.IDM.PROV.COMMON.ADAPTERS");
     public String getTargetType(String targetType){
          return targetType;
     public String assignTaskToUser(String userKey,tcDataProvider dataProvider ){
          System.out.println("The user key value:" +userKey);
          return userKey;
     }

Not sure what sample code I can give you, but you need to do a query in your adapter like:
select REQUEST_KEY from OIU where ORC_KEY='?'
Here ORC_KEY should be mapped to the process instance key.
Once you have the Request key, you can use RequestServcie APIs to get the requester information. http://docs.oracle.com/cd/E14571_01/apirefs.1111/e17334/oracle/iam/request/api/RequestService.html#getBasicRequestData_java_lang_String_
Or if you don't care then get the requester key from the request table. Thus you can have the final query as:
select USR_LOGIN from USR where USR_KEY=(select REQUESTER_KEY from REQUEST where REQUEST_KEY = (select REQUEST_KEY from OIU where ORC_KEY='?'))
HTH,
BB

How to assign an order to a GL account

Hi all,
Can anybody please let me know how to assign an order to the GL account?
Thanks,
S.Sumana.

Hi,
There is no such an assignment. When you post a document, you define your G/L accounts and cost objects. If you want to make a default internal order for certain cost element, you can go to KA02 or OKB9 and define the defaults there.
Regards,
Eli

How to Assign a Constant Value to a Dim. Member when pulling Master Data?

BPC Gurus:
I am trying load Vendor and Customer Master data into BPC dimension. My Dimesnion has memebrs: ID, EVDESCRIPTION, PARENTH1, TYPE. I have successfully pulled the ID and the description from 0CUSTOMER and 0VENDOR. However, I
need to have a ttext value for 'PARENTH1' and 'TYPE'. For Customers, I want to add a FIXED value "'CUSTOMER' for every
Customer ID pulled in and also for "TYPE", I want a value of "CUSTOMER". When I maintainthe Dimension, I want to see
th followingvalues:
ID                          EVDESCRIPTION                                   PARENTH1                         TYPE
0000000001         WALMART                                            CUSTOMER                        CUSTOMER
0000000002          TARGET                                               CUSTOMER                        CUSTOMER
and so ON
Since we have Vendor Numbers in the same Diemsnion, when I pull Vendors, I need to have similar values as:
ID                          EVDESCRIPTION                                   PARENTH1                         TYPE
0000005050         ABC Supply Inc.                                   VENDOR                            VENDOR
0000005051         BASF                                                    VENDOR                            VEDOR
and so ON
How can assign a Fixed value to the member Propert? Can I achieve it in Conversion file....?
( My atempts failed...).
Any suggestion recommendation would be gretaly appreciated.
Munna.

Hi,
For adding fixed values to the properties, you can use the transformation file. In the mapping section, you can specify a constant value. This value will be written to properties of all the members while importing master data. However, for parenth, its a bit different. First thing is that, you need to have a member called CUSTOMER, then only you can have CUSTOMER in the parenth column. Even if you add it and use the mapping section for this purpose, then it will write CUSTOMER to parenth for all the members (even to CUSTOMER member). And this will be wrong. So, you will need to write it manually.
Hope you got the idea.

How to assigne multiple value in key of read table

Hi gurus,
I want read table xxxx with key field1 = ' xxx' or field1 = 'yyy'.
how to assign multiple value as key for the same field while reading internal table.
Regards
sagar

Hi ,
You can loop the internal table like
loop at <table xxxx> where field1 = ' xxx' or field1 = 'yyy'
or you can write two read statements to read the internal table in wrk area.
read table <table xxxx> with key field1 = ' xxx'.
if sy-subrc <>0
read table <table xxxx> with key field1 = 'yyy'.
if sy-subrc = 0
endif.
else.
do your data processing.
endif.
Thans.

Org. Mgmt: How to assign bp to a chief of Org.Unit

Similar Messages

Maybe you are looking for