Org model - org unit consistency check warning.

Hello,
I am not familiarize with org model. when i tried to create one org. strucuture, every thing went fine. But when i did an inconsistency check i got the warning message " 'IS_SA_ORG' hierarchy maintenance incorrect "
Can anybody help me get the incinsistency check corrected.
Please help me out.

Pramod,
This is a typical org model issue..
here is the solution. "Make changes to table T77OMATTUS,
field PRIOX value to be made 0 for fields - IS_SA_ORG, IS_SA_GRP, IS_SA_OFF"
Do let us know if your check still fails...
Julius

Similar Messages

Why is consistency check warning [39054] raised?

Hi,
Today I migrated a 10g repository to 11g. After the upgrade I was checking the global consistency and the following warning is occuring several times
WARNINGS:
BUSINESS MODEL Declaraties:
[39054] Fact table "[fact table 1]" is not joined to logical dimension table "[dimension 1]". This will cause problems when extracting project(s).
The warning is correct, fact table 1 is not joined to dimension 1. But this is because there is no relationship between those two tables. Dimension 1 is not used by fact table 1. However, dimension table 1 is used by another fact in the same business area.
Why am I getting this warning, it seems to me that not every dimension should be joined with all fact tables in a business area. What is intended with 'This will cause problems when extracting project(s)'?
Regards,
Albert

Hi Albert,
I will suggest you to resolve all the warning its a best practice as u said having 500+ warnings is not good
Refer : Source does not join to any fact source
Thanks,
Saichand.v

BP number is missing for org units in org model

Hi Guys,
I have created org model in PPOCA_CRM and saved it CRM7.0. But BP numbers did not get generated for org units which I have created.
Can any one suggest me what is the reason and what needs to be done in order to get BP numbers for already created org units in PPOCA_ CRM or PPOMA_CRM.
Thanks for you help,
JM

Go to CRM IMG->Cross Application components->SAP Business partner->Business Partner->Number Ranges and Groupings->Define Groupings and Assign number ranges.
There check if any number range is defined with the "Int Std grouping" . If it is not define it.
and in SM30 for "T77S0" for entries HRALX/OSUBG assign a number range.

Report to check org units without any position display

Dear All,
I want a report which i can see only the org units in a graphical way. When i am checking through Simple maintainence mode I am getting org units along with positions also with in the graphical mode i have selected the view option under options menu there can able to see individual departments along with positions.
My request is i want to see the organization structure along with sub org units under sub org units with departments without positions. please let me know is there any standard reports available.
Regards,
HR user

Yes, the Report is
S_AHR_61016493-Organizational Structure-Organizational Structure
Select the first line and press F8

How to update BP number of an Org. unit in Org. Model?

Hi,
In Org. Model we have organization units which has BP. They are list together in couple. Can I update BP number of an org. unit in Org. Model? I want change it to another BP. Is that possible?
Best regards,
Long

Hi Long,
For each organizational unit created in the organizational model a business partner is generated automatically. This number range that will be used for creating a org unit can be defined.
If you are looking forward for creating a Org. unit with a specific number range, please following the below mentioned steps:
Step 1: Defining Number Range for Org Business Partners
Goto transaction BUCF or SAP CRM IMG Menu: SPRO-> Cross-Application Components ->SAP Business Partner -> Business Partner -> Basic Settings -> Number Ranges and Groupings -> Define Number Ranges
Choose Change Intervals
Choose Insert Intervals
Assign an interval you need and provide values for the field No., From number, To number, and flag 'X' in EXT. if external number range is required.
save your entries.
Step 2: Defining Groupings for Org Business Partners
Goto SAP CRM IMG Menu: SPRO ->Cross-Application Components -> SAP Business Partner -> Business Partner ->Basic Settings -> Number Ranges and Groupings -> Define Groupings and Assign Number Ranges
Choose New Entries
Enter Correspoding values in field
Grouping: for ex. Z4
Short Name: for ex Org BP
Description: Give some description
Number Range: Provide the number range defined in the previous step
save your entries
Step 3: Set up integration
Activate the integration of organizational units and business partners and assign the number range defined in the preceding sections.
Go to IMG: SPRO ->Customer Relationship Management -> Master Data -> Business Partner ->Integration Business Partner Organization Management -> Set Up Integration with Organizational Management
Enter the following values for the existing combination of Group and Sem.abbr.:
HRALX-HRAC - X
HRALX-OBPON - ON
HRALX-ONUMB - 2
HRALX-OSUBG - Enter your Number Range defined in the previous steps here.
save your entries.
Step 4: Execute Report for Changeover Classification
Execute the report CRM_MKTBP_ZCACL_UPDATE_30 in transaction SE 38.
I hope this will help you
regards
Srikantan

FM for Org Unit check

Hi experts
Is there any FM which directly check whether specified org unit directly comes under another org units for particular begda and endda.
Thanks,
Shital

Shital,it will check for all..i mean it is not checking direct only..it is checking indirect 2..
please check it
u can also make use of FM -
call function 'RH_READ_INFTY_1001_EXT'
    exporting
    AUTHORITY             = 'DISP'
    WITH_STRU_AUTH        = 'X'
    ISTAT                 = ' '
    EXTEND                = 'X'
      subty                 = l_relationship     "up or down
      begda                 = from_date
      endda                 = to_date
    CONDITION             = '00000'
    SORT                  = 'X'
    WITH_EV_FOR_INT       = ' '
    WITH_EV_FOR_EXT       = 'X'
    ADATA                 = 'X'
    KEEP_VARYF            = ' '
    tables
      i1001                 = lt_i1001
      objects               = t_org_units
    exceptions
      nothing_found         = 0
      wrong_condition       = 0
      others                = 0.
amit
Message was edited by:
        Amit Tyagi

Reports to check what org units or positions linked

Hi,
I want to run a report for 2000 positions and check
which positions are linked with which other positions
and which positions are linked with what other

hi,
sap provide the two types of relationship for a objects ,
A -
BOTTOM TOP
B----
TOP DOWN
for position to position ( A position reported to another position A|002 where 'A' is bottom up relation and 002 is infotype ( reports line to )
position is the line manager of another position B| 002 where the 'B' is top down relation and 002 is infotype .
position manages an org unit A |012
an org unit is managed by position B|012
report is HRP1001,
RupaPrasad

Org Unit blank

Hi,
The org unit detail is blank in the assigment page of a requisition.
Scenario: On Recruiters Dashboard under My Open Requisitions, select a requisition and press Assignment button. Assignments for the Requisitions page should be displayed in a new window. In header, Requisition name, Hiring Manager name, Status of the Requisition, Org. Unit, Recruiter and the Release date should be displayed. Here Org unit, details are blank.
Why org unit details are not displayed? We are working on EHP5.
Regards
Savitha

Try checking the tbale V_T77s0 for below integration switches
PLOGI ORGA --> Should be X
PLOGI PLOGI --> Should be 1
PLOGI PERLI --> Should be 99999999
If still the problem exists,
Try to run the below reports once
RHINTE10 uses for integration between OM & PA. (OM should install going for PA)
RHINTE00 uses for integration between PA & OM.(PA should install going for OM)
RHINTE20 uses to run consistency check between OM & PA.
RHINTE30 uses for integration between PD & PA.(PD should install going for PA).
PLOGI feature if it is "X" then it means OM AND PA integrated and vice versa.
Good Luck...!
KK

Org unit error !!!

Hi
I have a few questions and an org unit error when trying to process a quotation. Details below. If anyone can help, then that would be great.
"ORG UNIT (SALES) DOES NOT HAVE THESE ATTRIBUTES"
Org unit (sales) does not have these attributes
Message no. CRM_ORGMAN022
I have an org unit set up as follows
Root Org - Sales
Sales Org - Sales - Sale Organization
Sales Office - Sales - Sales Office
Sales Group - Sales - Sales Group
Org attributes for Division & Distribution Channel is a cobination called Tupel
In the organization tab it is shown as follows
Organization Unit - PLSG
Sales Organization - PLS
Distribution Channel - Z3
Sales Office - PLSO
Sales Group - PLSG
No Division ?
Why does org unit and Sales group have the same Code ?
I have pasted the diagnosis of the error but cannot determine from that where I have gone wrong.
Diagnosis
You have entered or changed an organizational unit in the "Organizational Unit (Sales)" field.
The attributes assigned to the entered organizational unit (sales) in the organizational model do not correspond with the data (sales organization, distribution channel, sales office, sales group, on the item level: division) in this document. Organizational data are inconsistent.
System Response
The system cannot continue to process the document. It cannot execute subsequent processes dependent on organizational data (for example, partner processing, pricing).
Procedure
You have the following options for solving this:
Enter an organizational unit with the appropriate attributes. Use the input help. You can check the attributes of organizational units in Organizational Model
Check the organizational model in CRM Customizing under Organizational Management -> Organizational Structure -> Change Organizational Structure. Change the attributes of the required organizational unit as required.
Regards
Avi

Hi Avinash,
goto TC : OOATTRCUST
Check the following for Sales Scenario
1. For Sales Scenario activate buffering
2. Select Attributes/Scenarios node and check for Attribute IS_SA_ORG is having inherit. Type as '0' and deactivate invisible
3. Remaining org.stru. attributes like IS_SA_GRP
N No inheritance
3 IS_SA_OFF
N No inheritance
2 IS_SA_ORG
N No inheritance
1 All should be activated for invisible(tick)
Run CRM_COM_ORGMAN_BUPA_INTEGRATE to update org.model.
To improve system performance, you can use the HRBCI_ATTRIBUTES_BUFFER_UPDATE(need to run after MW replication to clear the buffer) program for buffering organizational model and attributes. Call up view T77OMATTR via SM30 and select the buffering field for each scenario to buffer corresponding objects. Execute the HRBCI_ATTRIBUTES_BUFFER_UPDATE program every morning (after 0:00 hrs) before starting your systems
i hope it ll help u
Reward points if helpful
Cheers
Ranga

Org unit doesnt exist but I getting error by HRBCI_ATTRIBUTES_BUFFER_UPDATE

hi
Gurus, i have an issue with Org. Model, an Org Model was created and transfered from customizing box to testing box, then one error was issued when running HRBCI_ATTRIBUTES_BUFFER_UPDATE report: "missing COUNTRY for xxxx org unit". then I checked it in ppoma_crm and HRP1000 table to solve it, but it does not exist in the system, so my Org, Unit determination rules are not working due this error.
Has anyone gotten that error for that kind of ghost Org Unit, how can I figure it out??
Thanks in advance

You can set breakpoint at message -> get line in program there message appears and follow solve the problem.

Org unit and a sales Org

Hello,
Does any Org unit must be assigend to a sale Org and why
thanks,
Iris

Hi Iris,
Organizational Units form the basis of an organizational plan, Organizational units are functional units of a company. Depending on how a company is organized, organizational units can consist of departments, groups or project teams.
There are three different areas basically in SAP CRM Sales, Marketing and Service. An org unit can be assigned to different areas, for example an organization unit can be a sales organization in the Sales Scenario and service org in the service scenario.If your organization wants to be a sales organization, then you need to maintain the same on the Function tab of the org model. All the attributes relevant to the same, can also be maintained in the attributes tab page.
Hope this was useful to you.
regards
Srikantan

CIC0 - get actual org unit of user

Hi,
Does anybody knows how to get actual org unit of agent in CIC0, which he has choosen when logging to CIC0?
CIC_GET_ORG_UNIT reads only first of all user's assignments, and I need the one that he has choosen
Regards

Hi Radek, how are you?
Hi normally use that one, and I had no problems. It returns to me the actual org unit of choosen profile, at CIC0.
That function reads internal table CIC_OBJECTS, which was multiple entries. This multiple entries are the hierarchical upper level's of the choosen profile at organization model, like the position, org unit, etc. Since it returns the first 'O' (org unit) entry, it will return to you always the first upper org unit of choosen profile.
Can you re-check?
Kind regards,
Garcia
Edited by: Bruno Garcia on Jul 26, 2010 2:53 PM

Org unit date in adhoc query

Hi
I have created a TEM query in SQ02, based on infoset \SAPQUERY\HR_TEM_E (logical database PCH), in which I am outputting object name and date (P1000), and org unit (P8004).
The output on the org unit name corresponds to the most current version of the org unit, but my requirement is for it to match to the date that the course object exists, i.e. historical.
Would anyone know a way to code this field, or whether there is a functional solution to this?
Please do let me know.
Anyone?
Edited by: minttea on Aug 10, 2010 3:52 PM

Hi..
Pls check below code to fetch the tesxt of historical org unit. hope it will help.
*//Internal table declaration.
DATA : lt_00 TYPE STANDARD TABLE OF pa0000,
       lt_psn TYPE STANDARD TABLE OF zhrpositions,
       lt_ret TYPE STANDARD TABLE OF bapiret2,
       lt_01 TYPE STANDARD TABLE OF pa0001,
       lw_01 TYPE pa0001,
       lw_psn TYPE zhrpositions,
       lt_comps LIKE zstr_hr_comps,
       lt_return LIKE bapiret2.
Thanks,
kl
Edited by: Narayana on Aug 10, 2010 10:50 AM

Error : Sales Org.Unit does not have these attributes -- Urgent

Hi, Team,
I am unable to create a service order with serivce material ( Only installation visit charges ) for w/o warranty product .
I am getting error : " Sales Org.Unit does not have these attributes "
I had checked the related Org data of respective sales org , already the sales area combination is also maintained from R/3 with required attributes "
Pls revert with possible solution .
Regards,
VCS

PePe :
Thanks for reversion !!
Basically it is a product Service Material (Servicing Charges), where in I had checked in the transaction , Though the required sales area is well maintained in the R/3 System and is being replicated to the CRM .
When I checked the product Service material , the required comination is missing and could find other sales area combinations .
Pls guide , how to go to get this resolved .
Regards,
VCS

Automatic creation of an account for org unit

Hello Experts,
System automatically creates an account for organisational unit with the role organisational unit. But when i am creating a new organization model, the org units are not created as accounts.
Kindly suggest me,
Thanks and Regards,
Lakshith Rao

Hi Lakshith Rao,
For some reason BP number must not have got generated for your Org. Could be because of some errors.
Go to SPRO-> CRM-> Master Data-> Business Parnter-> Integration Business Partner - Organization Management-> Create Business PArtner Initially.
Select Org. Unit and search and select your org. unit. Click on execute.
If there are no errors in your org. unit then BP number will get generated or else it will mention what data is missing.
Cheers,
MG

Org model - org unit consistency check warning.

Similar Messages

Maybe you are looking for