ORG STRUCT for POWER

Hi everyone,
Can anyone suggest the SD Org.Struct. in Power Sector.
Regards.

CAN SOMEONE PLZZZZZ HELP WITH THEIR VALUABLE INPUTS>>>>>>
Regards.

Similar Messages

  • How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro?

    How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro with OSX 10.7.4?
    This message appears: You can't open the aplication LogicPro.mpkg because power pc aplications are no longer compatible.
    Thanks folks

    You should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
    Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly.

  • Creation of Sales org views for customers related to vendor

    Hello All,
                 Can any body tell me is there any functional module which can be used to created the sales org views for customers related to vendors.
    Regards
    Srinivas

    Hi Ravi,
    the number of sales area possible would be 6 sales area,
    yes you can of course use the common master data functionality
    After creating the organizational structure and relevant master records you want to use as the masters, that is, in the distribution channels and divisions you are going to use as a reference, you can group distribution channels and divisions separately for master data (which combines customer master and material master records), group condition records, or both master data and condition records.
    Letu2019s say you have a product range that is not different for the four different distribution channels you have (the channels could be telesales, retail, industry, and wholesale.) Neither is there a difference in the customersu2019 details when they purchase through one or the other. Thus, you will not want to create a multiple of four views of customer master and material master records. Merely create the customer master records and material master records in one of the distribution channels, such as retail. Then assign the other distribution channels you created in the organizational structure setup to this one.
    Donu2019t forget this means you can only create or change master data in the distribution channel that is being referenced. In the scenario above, this means you can only change data for the retail distribution channel. Even if you should access a customer or material master in change mode, press F4 (possible entries), and select telesales, industry, or wholesale, you will receive a message u201CSales area is not defined . . . u201D
    The same is true for the sharing of conditions. If conditions are shared, you need only create a condition in the distribution channel or division you are using as the reference. Obviously, this only pertains to conditions that have the distribution channel and/or division in their key, such as a price based on sales area
    Revert if helpful
    Mohit Singh

  • How to Install Oracle 11g on Linux for Power?

    I've installed RedHat Enterprise Linux 5.4 on IBM PowerPC server.
    Now I want to install Oracle 11g on it. But there are no Oracle 11g downloads for Linux for Power.
    Is there any workaround so Oracle 11g can be installed on Linux on Power?

    Hi,
    I think you can forget it. Oracle 10g R2 was the last version supported on Linux PowerPC.
    Cheers,
    David
    OCP 9i
    http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

  • Adobe flash Player for Power PC ?!!!!!

    Hi guys, I have an iMac G5  PowerMac8,2   PowerPC G5  (3.0), I did a big mistake and upgraded my Adobe flash player, I tried many older versions for power pc but nothing really worked, please tell me what to do.
    Thanks

    Yes, is this what you already tried though?
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
    Download this if you haven't...
    http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
    Once downloaded if it doesn't unzip automatically the double click on that file.
    Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
    Or I put up the smaller ones here...
    http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
    Stand alone player...
    http://dl.dropbox.com/u/450421/LastFlashPPC.zip
    I guess the best version is 10.1, is that right ?!
    Yep, 10.1.102.64 is the absolute latest for our PPC Macs.

  • I have a problem with the indicator for power on the side of my HP DV6-1341el.

    I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic programs, they tell me they found that the computer is running on battery power and not AC mode.
    Where is the problem?
    I have also made the maneuver for the recognition by the operating system of the battery and does not seem to be there the problem.
    If I use the laptop without battery in AC mode happens that led to the side of the notebook blinks twice, three times and then goes off when I put the power jack.

    Go into the Device Manager. Expand the battery device, select the ACPI-Compliant Battery Control Method device, right-click it and select uninstall. After you have done that, right-click any device in the Device Manager and select scan for hardware changes. Your operating system will reinstall the  ACPI-Compliant Battery Control Method device. 
    Post your results whether they are negative or positive to keep us posted.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HT5815 im searching a for a update there makes it possible for mac computer with OS X To play games there aren't Supported for power pc, Like Warcraft 3, Diablo 2 and those kind of old games there worked on the previous versions of the OS

    im searching a for a update there makes it possible for mac computer with OS X To play games there aren't Supported for power pc, Like Warcraft 3, Diablo 2 and those kind of old games there worked on the previous versions of the OS

    Here is a thread for you: Is there any possible way to run PPC...: Apple Support Communities

  • Do anyone know we're to buy a 3 meter long cable for power to my iPad

    Do anyone know we're to buy a 3 meter long cable for power to my iPad?

    http://www.amazon.com/AmazonBasics-USB-Lightning-compatible-Cable/dp/B00FA4Y7N2/ ref=sr_1_7?ie=UTF8&qid=1396967394&sr=8-7&keywords=Apple+lightning+to+usb+cable
    http://www.amazon.com/ACEPower%C2%AE-CERTIFIED-Premium-Lightning-Generation/dp/B 00HMY1LIC/ref=sr_1_28?ie=UTF8&qid=1396967688&sr=8-28&keywords=Apple+lightning+to +usb+cable

  • Batteries for Power Mac G3 Beige Minitower

    Where can I get batteries for Power Mac G3 Beige Minitower? I think they're Lithium batteries 3.6V 200W 922-4542.

    m i g,
    Here is a source for $4.99:
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
    Jim
    Note to others: (direct quote from above link)
    This battery is an exact replacement for the below listed models.
    Macintosh II series computers
    Macintosh SE FDHD
    Macintosh Classic (4-chip and 2-chip)
    Macintosh SE/30, IIx, IIcx, IIci, IIfx, IIsi series computers
    Macintosh IIvi, IIvx, Performa 600 series computers
    Macintosh LC, LC II, LC III, Performa 400 series computers
    Macintosh Quadra 605, LC 475, Performa 475, 477 series computers
    Macintosh LC 520, LC 550, Performa 550 series computers
    Macintosh Classic II, Color Classic, Performa 200 series computers
    Macintosh Centris 610, 650, 660AV series computers
    Macintosh Quadra 610, 660AV, 650, 700, 800, 840AV, 900, 950 series computers
    Power Macintosh 6100, 7100, 8100 series computers, and Performa 6100 series computers
    Power Macintosh 7200, 7300, 7500, 7600, 8500, 8600, 9500, and 9600 series computers.
    Power Macintosh G3 - all models, entire series
    iMac - all models, entire series
    Power Mac G4 - all models, entire series
    Power Mac G5 - all models, entire series

  • Test Equipment for Power Supply

    Hi ,
    I want to develop a test software for power supply using LabVIEW which we can use for our mass production.
    We are currently using the following for the development stage.
    1. Digital Multimeter(Topward 1330)
    2.Oscilloscope(Agilent DSO 6054A)
    3.Programmable AC Source(Chroma 6430)
    4. DC electronic Load (Chroma 63030)
    We are using GPIB as the programming interface.We also use NI-VISA, NI-488.2 from LabVIEW to communicate.
    Since I am new to this domain, I need an expert help in programming this software.
    Thanks

    Dennis_Knutson wrote:
    And for follow up questions, please don't post to this board. You have nothing related to NI's pxi chassis/boards.
    p.s. And after the test specification is complete, perform the tests manually. You can't understand a programmatic approach if you don't understand the instruments and their capabilities.
    "You can't automate what you can't do manually" is one of my favorite maxims. 
    Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
    If you don't hate time zones, you're not a real programmer.
    "You are what you don't automate"
    Inplaceness is synonymous with insidiousness

  • Oracle 11g on Linux for Power?

    Hi All,
    Does Oracle today has support for Oracle 11g on Linux for Power?
    I couldn't find it from the website, only has Oracle 10gR2..
    Please advice..
    Thank you..
    Regards,
    Alson Ang
    First Solution Sdn Bhd

    Just found Oracle Support document 1310584.1, last updated August 5, 2011:
    Says:
    Oracle will not be releasing Oracle Database 11g on IBM Linux on Power systems. Customers can continue to run the terminal patch set of Oracle Database 10g Release 2 (10.2.0.5)....
    Extended Support is offered through July 21, 2013
    Limited Extended Support offered until July 31, 2015
    Hope this helps.
    Matt

  • How to get subordinate org units for a given org unit within specific dates

    hi,
    How to get subordinate org units for a given org unit within specific dates

    Use the following Func module ..
    HRWPC_RFC_STRUCTURE_GET
    *--Get the sub org.unts for the given selection.
        CALL FUNCTION 'HRWPC_RFC_STRUCTURE_GET'
          EXPORTING
            ROOT           = root_org   <-- Give the Org unit 
            EVPATH         = 'O-O_DOWN'
            BEGDA          = s_date-low
            ENDDA          = s_date-high
          TABLES
            T_OBJEC        = t_objec
            T_STRUC        = t_struc
          EXCEPTIONS
            NOTHING_FOUND  = 1
            INTERNAL_ERROR = 2
            OTHERS         = 3.
        IF SY-SUBRC <> 0.
          MESSAGE i000 WITH 'No Sub Orgunits for ' s_objid-low.
        else.
    *--Prepare final sub org.units tabl.
          loop at t_objec.
            if t_objec-objid ne s_objid-low.
              it_orgunit = t_objec-objid.
              it_orgunit-begda   = t_objec-begda.
              it_orgunit-endda   = t_objec-endda.
              APPEND it_orgunit.
            endif.
          endloop.
        endif.

  • Microsoft BI Semantic Model for Power View is missing in data source

    Microsoft BI Semantic Model for Power View is missing in data source type drop down when cretaing a rsds data source for powerview in sharepoint 2013

    Hi Sanjay,
    I resolved the issue.Follow the steps
    1)Go to Central Admin->System Settings->Manage Farm Solutions (Under Farm Management)
    2)Check if "powerpivotwebapplicationsolution.wsp" is there and is deployed for the webapplication under which you are creating report by verifying
    Deployed to:,if not then deploy that for your web application.
    Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

  • Sharepoint 2013 support for power query

    Hi,
    I wanted to know whether SharePoint 2013 supports power query and can we refresh power query data from excel services.
    Thanks,
    Bhawna.

    Hi Bhawna.,
    According to your description, my understanding is that you want to know whether SharePoint 2013 support Power Query and refresh power query data from excel services.
    The  refresh of workbooks involving Power Query queries isn't currently available in SharePoint 2013.
    Here are some similar posts for you to take a look at:
    http://social.technet.microsoft.com/Forums/en-US/62b6384e-3120-40e2-9469-01c808530f55/does-sharepoint-2013-have-power-query-services-similar-to-power-pivot-and-power-view?forum=powerquery
    http://social.technet.microsoft.com/Forums/en-US/2da77984-5a97-4102-9119-97ecbc39f527/publish-power-query-workbook-to-sharepoint-2010?forum=powerquery
    In addition, I am not an expert for Power Query, you can create a new thread on the Power Query forum, more experts will assist you with this issue.
    Power Query forum:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=powerquery
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Data source for this data connection isn't registered for Power BI

    Hi, I am getting this error when I set Schedule Data Refresh to refresh data from db.  How do I register my connection to the data source?  Is this a fix on SQL server or Power BI?
    FAILURE INFORMATION
    Failure
    Correlation ID: c5132b7a-3c54-4f12-a048-3ddcf0b95f26
    Data connection Status
    SqlServer twcperfsql1 OfficePerf OnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Tell your Power BI admin the admin needs to register this connection to this on-premises data source.
    Thanks for your help.

    I'm running into the same issue, I did configure the Gateway and then the data source in Power Bi.
    When I go to the Power BI Admin Center and click on "Test Connection" it seems to be working. But when I refresh the data from Power BI it doesn't work. Now if I edit the spreadsheet in excel and refresh the data in PowerPivot then it works. So
    not sure why the solution doesn't refresh from the automated service in Power BI without this useless error.
    Thanks
    Fabian
    In case it helps this is the actual error:
    Failure Correlation ID: ecc73a16-7264-45b2-9baf-e3448f007211                                                     
    Power Query - dbo_TableAOnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Ask your Power BI admin to register the data source in the Power BI admin center.
    Also further information I have found so far is that the Gateway is receiving the requests for the refresh and it shows the message below, so the data source is found and communication seems to be happening from server to client and back, not sure why server
    doesn't seem to like the data the Gateway is sending back to server.
    The feed 'dbo_TableA' was successfully accessed at 7/15/2014 4:23:26 PM.
    The request took 00:00:00.0000105 seconds.
    Activity ID: e8464e5d-3f0a-49c2-b10b-450fec3e5940

Maybe you are looking for