Org structure uploading in SAP version 3.1i

Hi Experts,
We have to upload Organisation structure into SAP HR.We are using Version 3.1I.
Can any body please tell me how to do that.
It's important as in version 3.1 i we cannot use LSMW or eCATT.
Thanks and regards
Rajeev Chhabra

Hi Rajeev,
SAP Best Practices provides load tools that should be valid for 3.1 since the data structure hasn't changed much. You can also use delivered program RHALTD00. I'm not sure if plain old CATTs were around in 3.1, but those would work as well.
Good luck,
Sharon

Similar Messages

Integrate the Org structure and employees SAP HR system to CRM via ALE

Hi All,
We want to integrate the organization structure and employees from mySAP HR system to mySAP CRM system. We are also aware that the same can be achieved through ALE Interface between both these systems.
In addition to the HR Organization Structure from HR system, can we also bring over the Sales Organization Structure from R/3 using transaction CRMC_R3_ORG_GENERATE?
1) Can someone , please let us the possible challenges which might occur when we download HR Org structure from SAP HR to SAP CRM.?
2) What is the implication of maintaining an HR org structure and CRM Sales Org structure within the SAP CRM 52 system?
3) Any _precautions) should we take before doing the download via ALE??
Please get back, suitable points will be awarded.
Regards
Ritvij

Hi Ritvij,
Couple of things that spring to mind are:
1) When you do the initial data load (PFAL) try to ensure that no one is amending the Org structure as Objects can be locked and therefore not transferred. (on one of our test loads the top level was locked and therfore all subsequent levels were just transfered and we didn't have a top level)
2) Keep the 'forms of address' in CRM the same as the R/3 ones
3) Keep the same Employee and Org Unit IDs but prefix with (for exmaple) EM and OU in CRM. (Through the HR integration config in CRM). This may also (apparantley) aid you if set up something like an Employee interaction centre in the future.
I will update when other stuff springs to mind.
Cheers
Gaz

DD03P Table is a Structure in the SAP Version 5.0

I made the mistake, not is the table DD03P is a View.
I am doing the migration of Sap Version.
In my SAP R/3 Version 4.0B, exist a View DD03P but in the Version 5.0 is a Structure.
Because i read the DD03P View, and the system give me the follow error: "DD03P is not defined in the ABAP dictionary as a table, projection view, or database view".
What can i do for resolve this problem?
Message was edited by: Gustavo Zuluaga

Hi,
When I'm trying to select from DD03L as suggested by you all, I'm getting the following error:
"Unknown column name "SCRTEXT_L" field list. field list. field list.field list."
Does anyone know how to overcode that? It's a standard table and solutions to that should easily be found, I guess.
Please help.
Thank you.
Regards,
GauravB

Org Structure download from HR and Uploading into SRM

Dear All
We have SRM 7.0 and ECC 5.0.
We are trying to load ORG structure data from SAP-HR into SRM. These 2 systems are not connected and we can't use the ALE synchronously. Can we download the HR org structure - ALE Distribution- iDoc into a file from the SAP-HR System and then upload the same into SRM, to create the entire Org structure? Pl provide your inputs.
Thanks in advance
velu

Hello,
Did you use any evaluation path to capture org structure when download the file using PFAL program.
We are looking to capture O,S,C objects ie HRP1000 objects as first step.
We are looking to capture all relationship belonging to that ORG unit ie HR1001 relationship as second step.
Any thoughts?
Thanks.

Uploading new Org Structure when old one exists?

Good day,
I m faced with the following scenario:
There is an org unit with the following no assignment:
O --> 00001 to 09999
S --> 100001 to 199999
P --> external number assignment
Now only S P and O are being used.
The client wants to correct the current org structure.
They wanted to reorder the org units numbering.
It was demonstrated to them in QAS client that this will entail deleting the object and relations to give the object a different number and in OM, the relations are important not the object ID.
The client is working on Org Units in batches and cannot get all the information ready at one time and cannot wait for the final data upload in PRD.
Thus, they have instructed us to go with new numbering for Org units from 1001 .... onwards so that upto 100 they are not touched.
And we have been asked to start uploading ORg Units in batches, firstly in QAS clients and then in PRD.
What r the consequences of having 2 numberings for the same object in OM?
Is it possible to have a plan version and an active version of Org Structure in SAP? If so, what are the limitations in terms of object validity?
Kindly advice.
Thanks and regards,
Archana.

Marisa,
Looks like your purchasing org has purchaing org and purchaing group assigned together in the function tab.
Purchaing org details should be maintained one level below your root org. In fucntion tab for ONE COMPRAS maintain your purchasing org details. DONOT MAINTAIN PURCHASING GROUP TOGETHER.
Maintain purchaing group to the org unit where all your users are. I.e org unit compratoes...something like that !!!
Also maintain relevant responsibilities for product categories in purchasing group and for purchaing org...in the extended atributes maintain the product categories.
Your company code looks ok.
This should fix your problem.
Assign points if your problem is solved
Thanks,
Sundeep

Uploading External Simple Org Structure

Hey all,
Has anyone had experience with loading external org hierachies in SAP HR? We were asked to load a simple org structure extracted out of PeopleSoft HR (simple parent child relationship) in to R/3.
Does anyone have clue as to the best way to do this? We current only have an SAP minimaster and are not Organizational Management.
Any help would be GREATLY appreciated.
Thanks.

Hi Paul,
1. Call report RHMOVE00 (with transaction se38. It creates an example file)
2.maintain the example file with your objects
3. Call report rhaltd00 to upload file (it generates a Batch-Input which you could run).
Look also at the documentation of the reports
Regards
Bernd

HR Master Data Uploads - Uploaded Employees not appearing on org structure

hi experts.
i uploaded employees using a bdc program and all the information got in. but on viewing the org structure using PPOME the positions remain vacant (there is no indication that the position has already been occupied).
Your help will be appreciated.

Pls run program RHINTE00 via SE38
Regards,
Dilek

Mass upload of Org structure

Hello,
Is there any means to mass upload the Org structure.?
Regards,
Madhan

Search on this forum for the document "transporting EBP systems" it's quite an old document, but still helpful.
Also, take a look at RHMOVE00 and RHMOVE30, that might come in handy.
Regards,
Robin

Org structure in SAP SNC

Hi All,
What is the Org structure in SAP SNC???
Thanks
Best Regards,
Sanjay

Hi Sanjay
>If one R/3 location is CIFed to SNC what it will become in SNC??
Each Supply Chain units in R/3 like Plant,Vendor,Customer,Supplier etc are handled as locations in SAP SNC or SAP SCM
Lets say a Plant XYZ is refered as location XYZ of type 1001 in SAP SNC
Go to transaction in SAP SNC /SAPAPO/LOC3 - Location
You will see field Location Type :
1001     Production Plant
1002     Distribution Center
1007     Storage Location MRP Area
1010     Customer
1011     Vendor
Basically in SAP SNC/SCM all these are locations, where planning happens, to map them back to R/3, they differentiate these locations based on location type.
>What is the BP no. and what is the role of that location that CIFed Location??
BP no corresponds to the organizational unit.
This comes into picture, in order to share the internal application (SAP SNC owned by OEM-Original Equipment Manufacuturer) to thier supply chain members like customer,supplier and sub contractor
They brought this BP concept, where an external supply chain unit is defined as BP of type Organisation and the necessary users(internet users/persons) are created under it
Now the mapping happens in location master /SAPAPO/LOC3 in the field Business Partner Number
>Is it not having BP no.?? Is the Storage location not taken into picture in SNC???
Yes it can have the B.P no provided before cifing, you enable the option both
in cfm1 field Create Loc./BP
This is only available for vendors,customers
For plants you will have to create manually in SAP SNC and assign it in location master
Storage locations are not handled in SAP SNC, I think Nikhil already mentioned it
Refer this help link
http://help.sap.com/saphelp_scm70/helpdata/en/3a/d5d83773c3522be10000009b38f842/frameset.htm
Integration of Locations
Best Regards
Vinod
Edited by: Vinod Kumar Pedapati on May 12, 2011 7:51 AM

Replication of HR org structure to SAP SRM

Hi,
Please let me know the step to Replicate the HR org structure to SAP SRM.
Thanks,
Manu

Manu,
Refer the below link the same is applicable for SRM as well.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30139fb0-360c-2a10-1e9f-9d5417754983
Best Regards,
NMK

Org structure Data Upload

Dear All,
I am in the process of data upload fro Org structure, this work I will do from SCAT.
Can anyone tell me in Excel file what I have to put parameters for data upload of O-O, O-S, S-P etc....
Regards,
Kumar

no Om praksah, I can do that small small maintenance, but I have to do major data
upload activity position to position .....
e.g. you take case of one new position, so you have to see case of S-S, tehn S-C, then S-O....like that...
for this activity I have to use pp01 xn, and for that we have to do scat....and for scat we need data..in excel....

What sap fi org structure . and co org structure .

what sap fi org structure . and co org structure .

hi subhash....
FI structure is
Client->Controlling Area>Company Code-->Business area...
The Co organization structure is

Operating concern [/b>- Controlling area > Comapny code--> Cost center

Thanks & Regards
ranjit
null

Plan version and org structure

Dear all,
As the company is planing to change/expand it's org structure, they created a new org structure. Someone said that, we can do future planing in by creating a dummy org structure and once it's approved, we can make it as original and will keep the old org structure for reference. And to activate the new org structure, we need to create a new plan version.
So my question is,
1. How to assign/link the new org structure to the new plan version? How can we make sure that the new changes (eg. any new joinee) will effect only in the new org structure and not in the old org structure?.
2. How to transfer the old org structure details to the new org structure?
Regards
ET

Hi Thomas,
You can copy your active org structure through Tcode (RE_RHCOPL00 - Copy) then in Table T77S0 make the Plogi - Plogi switch as 02 that is your alternate plan version. Then through PSO0 you can set this plan version.
Hope this helps.
Shrikant

ERP EIC & Org Structure Mapping - SAP HCM

Hi All
Can any one provide me information on Org Structure Model for EIC shared Service Centre and how to map with existing org structure? If we create 4 levels of SSC (Level 1 , 2,3 & 4) We will be creating 4 org units but do we need to create these 4 new org units related to existing org structure of the company? Or is it an independent? How do we map it? Looking for some general advice on this to proceed with creating new structure for SSC.
Appreciate if any one can guide on this.
Thanks & Regards
Kumar

Hi,
You have to define one Root organization unit and depending on the degree of Reporting structure you have to define sub organization units.
If you have Four chief positions in four org units & having subordinates in four Org Units (grades) you are suggested to create four org. units.
Regards,
Kapil Kaushal

Purchase Org Structure in SAP SRM 7.0

Hello SRM Gurus!
We are trying to build Purchase org structure. here is scenario. Cost center driven Model
- 1 V.P. is responsible to 5 cost centers
- 1 Director works with min 2 V.P. i.e 2 cost centers OR 1 VP/cost center will have 5 director
- 1 Manager works with 2 directors - 2 cost centers OR 1 Director will have 10 Managers
- 1 requestors works with 3 Managers - 3 cost centers OR 1 Manager will have 10 requester.
ECC org structure :
1 company code will have 3 plants & 1 Purc Org
Can I get some input in Building the Purchase Org structure.
Regards
Mangesh

Hi Masa,
Thanks!
So you mean one company code will have one Pur. Org.
Every Plant will have 3 pur groups.
As I told there are 150 cost centers. Each VP will have min. 15 max .. 60 cost centers with him ...controlled by him.
Should I assign users by plant, Pur group or all under one Company OR cost center wise.
Pl. suggest
regards
Mangesh

Org structure uploading in SAP version 3.1i

Similar Messages

Maybe you are looking for