Org Unit Change Report

Hi,
I have an requirement, need to create report which specifies all the list of Org Units that are created and delimited during the given period.
The report has to display any changes for Org. Unit in HRP1000, HRP1001 and HRP1008.
Please suggest how to find out any changes occured for Org. Unit.
Standard report RHCDOC_DISPLAY needs to be used for Org unit change history report.
Regards,
Sunil

You need to maintain the Settings for "CHANGE DOCUMENTS" in the Config;
use this IMG Path :
Personnel management -
> Organization management -
> Basic Settings -
>Activate Change Documents
Execute the link Activate Change Documents and maintain all the settings as below;
Plan Version : 01
Object Type : S , O , (all the objects that you like to put )
Infotype : 1001 / 1008
Subtype : *
Active :  Tick the check Box.
You need to create One line per Object type;
Ex :   
01(Plan)                                   S (OTYPE)                         1001(ITYPE)                             *  (STYPE)                         Tick Mark (Active)
Hope this would give you clarity.
Regards,
Anirban

Similar Messages

  • Org unit changes but position not  when emp move from 1 org unit 2 other

    Hi,
    We have a scenario in which when an employee moved from org unit to another (temporarily) his position doesn't get changed but org. unit changes. How to manage it???
    Thanks in advance
    Anand

    Hi Naveen,
    Let me expain the process in details when you enter "Position" in IT 0000 & 0001  in Emp. Master (PA30) it inherites Org. Unit, Org Key and Cost Center. To get inheritance of org unit, org key, cost center along with position you have to assign all to org. unit in PPOM.
    I want "Position" to be remained unchanged when an employee moves from one org unit to other only organization unit need to be changes.
    Please suggest
    Thanks a lotttttttt

  • Department / Org. unit Hierarchy report

    Hi Team,
    I am trying to pull a department / org. unit hierarchy report that rolls-up, for example if I am an IT analyst, under Service mgmt, ultimately rolling up to IT (org. unit) similiar to PPOME view.
    I did try a FM (RH_STRUC_GET), but could not get the req. details.
    Let me know if there is something like this, that I can use.
    Thanks
    RL

    Hi,
    Please try evaluation path O-O-S-P in report RHSTRU00 as mentioned by semvladigo.
    Regards,
    Dilek

  • Problem with Org Unit Change

    Hello Experts.
    We have a problem here.
    There is an employee say : X in position ABC which belongs to Org Unit XYZ.
    Now, there is a change in the Org Structure. The postion has not changed, the employee belongs to the same position. But the Org Unit has changed to PQR and has a new chief.
    The problem is, in the SAP Portal, the Organization assignment is picking up the Chief of XYZ instead of the new chief.
    What could be the reason for this?
    Regards
    Avik

    Hi Avik,
    Check dates on records for ABCu2019s A|003 relationship to PQR and chiefu2019s A|012 relationship to PQR. Maybe the old records were not delimited and hence they are getting picked up.
    Donnie

  • Org Units without reporting relationship

    Hello Everyone,
    Can anybody suggest if we can report all the org units which do not have any reporting relationship via adhoc queries ?
    I am trying the same but not able to do so. The way I am trying: Evaluation path - A002 and restricting the output with program selection - relationship not equal to A-002.
    Please help on this to proceed if we can do this in adhoc query.
    Regards,
    Raunak

    Hey Scott,
    Thanks a lot this tcode is very useful and it worked just in the way customer wanted !
    Regards,
    Raunak

  • Not able to view reports by users under top org unit- Interactive Reports

    HI,
    We are using CRM interactive reports.
    In my project the client is having 3 Sales Org with two sales office and two sales group for each office respectively.
    When the document is created by the  sales Executiv, he and his manager is able to see it in the reports but the top person of that org unit is not able to see  the report.
       Some say the report can be viewed by only employee responsible and his manager. In my project the core team is sitting in the top ORG unit. They want to see the reports of all the sales org units.
    With Regards,
    Selvam T

    Dear Luke,
    I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
    Is there any specific step that needs to be done to see these branches.
    By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
    Regards
    Hkishan

  • HR Org Unit / Postion Report

    How Do Everyone!
    I am writing a HR report which will show personnel no.
    and name. I also want to include the Position No/ Descr
    and Org Unit no/descr.
    Is there a function that will return the position and
    org unit details passing only the pernr?
    Thanks
    Andy

    Hi Andy,
    go to the SE37, and test(F8) the RH_STRUC_GET F.M. in this way:
    ACT_OTYPE                       P                  
    ACT_OBJID                       <pernr>           
    ACT_WEGID                       P-S-O              
    ACT_INT_FLAG                                       
    ACT_PLVAR                       01                 
    ACT_BEGDA                       <date>         
    ACT_ENDDA                       <date>         
    ACT_TDEPTH                          0              
    ACT_TFLAG                       X                  
    ACT_VFLAG                       X                  
    AUTHORITY_CHECK                 X                  
    TEXT_BUFFER_FILL                                   
    BUFFER_MODE                                        
    In the RESULT_TAB table, you will get the Position ID and Org.ID. To find the text of its, just go to the T527X table.
    Hope this help you,
    Carles

  • User defective after org. unit change-Dont want to change BP

    Hi,
    We are on SRM 4.0 and we replicate our org. strcture from backend R/3.
    Whenever any user in the org. structure is moved from one org. unit to another the user becomes defective and it needs to be repaied at level 02.
    The repair level 02 requires deletion of old BP and creation of new BP. We dont want the deletion of BP to happen.
    Some of the forum answers have been to unassign the BP and assign it again in the new org. unit. But I'm not sure why but it's not helping in my case.
    I would appreciate if someone can send me a screenshots of the above steps(Unassign and reassigning BP) .
    Best regards,
    Sam

    Hi,
    Please follow the below procedure for unassign and reassign BP.
    1- Goto Tcode PPOMA_BBP.
    2- Right Click on the BP which you want to unassing.
    3- Select Delete-->Assignment.
    By doing the above steps you can unassign the BP.
    Now for re-assigning the BP to the ORG.
    1- Goto TCode USERS_GEN.
    2- Choose "copy user and employee datafrom template".
    3- Choose the option "Create Users from Existing SU01 Users".
    4- Give the Org Unit (ID) in which you want to reassign the BP.
    Now your BP will assign to the given Org Unit
    Regards,
    Sachin

  • Org unit reporting to multiple Org units

    Hi,
         We have set the A002 relationship as time constraint 002 and the B002 is set up as time constriant 3 but we are still able assign the org unit to report to multiple org units. Can you please let me know how to fix this issue.
    Thanks
    Vick

    Hi,
    Change the reporting relationshipp time constraint as 1
    Regards,
    Nitin

  • One organizational unit reports to two org unit

    Hi All,
    I am new in HR, please help me to achieve the following:
    We required that one organizational unit reports to two org unit .
    How can we achieve that??
    Thanks,
    Anumit

    Hi,
    In SAP there is one-to-one relationship maintained in the system. In your case you want one org unit should report to 2 Org units, which is not possible as per my knowledge.
    The relation betwn thm will be A-002 (Reports to), also if you try to maintain the same for both the Org units then it will ask to delete one of the relationship in the system.
    Regards,
    Prasad

  • Org Unit with more than one Chief Position

    Hi,
    we have implemented MSS via the portal using a one-to-one relationship between Org Units and Chief Positions, and we would now like to have multiple Chief positions attached to one Org Unit.
    As far as I can tell from the SAP documentation, this should be straightforward, but the results we are getting do not seem correct.
    I have an Org Unit that has position 1 and position 2 assigned to it with relationship A/B 012 denoting that they are Chief Positions.
    User 1 is holder of position 1 and user 2 is holder of position 2. 
    Both users have the same security roles.
    The views used on the portal are configured using the MSS Object and Data Provider functionality, using the standard ORGEH view, evaluation path for root objects SAP_MANG and evaluation path objects SBES.  The checkbox 'Excl. Managers' is ticked.
    The problem is this - both users can see all the subordinate employees in the Org Unit when they log on to MSS but user 1 can also see user 2 in his list of employees, which is not correct as user 1 and user 2 are both chiefs.  User 2 cannot see user 1 in his list of employees, which we would expect.
    The only logic we can see for user 1 being able to see user 2's details is that user 1 must be somehow defined as the 'superior' Chief Position, but we have not defined this as far as we know.
    Any ideas as to why this is happening for us?
    Many thanks,
    Fran.

    Hi Fran,
    Sounds like you have set up the reporting structures and MSS properly.  I do question why two chiefs for one org unit.  As you stated, both can see all employees and so both can approve time, give pay increases, etc. without the approval of the other.  If this is want you want, then you have set it up properly.  Usually, one has to approve the actions of the other, thus, is in a superior relationship.  This can be handled by having a higher level new org unit with the higher person as chief and the lower stay as head of the lower org unit which reports to it. 
    As you have it now, both individuals have the same rights and access.  They should both be excluded from iViews if you checked the "Excl. Managers" box.  Since, you just recently made one a manager, have you checked for any date dependencies?  If the Chief #1 is selecting a view for "Current Year", for example, he would be able to see all persons who reported to him for this year, which includes Chief #2.  There are no 'superior chief' designations (except by structure), so without being able to view your configuration, my suggestion is to check all dates for the assignments and relationships vs. dates of the view.

  • How to find delimited ORG unit in a report?

    Hi All I need to find the org unit's which doesn't have end date as 12/31/9999 and delimited within 2 years in my report?
    How can we achieve this ...waiting for reply
    PS: I believe there is no LDB required..
    Regards
    Sas

    >
    > Hi,
    > Where are you stuck?
    >
    >
    HRP1000 table, field - OTYPE(check for "O" for org unit).
    > get the difference between BEGDA and GDATE(delimited on) and check if it's more than two years.
    >
    > Regards,
    > Sumit
    I want ORG UNITS whose END DATE is within 2 years????
    I Will give you scenarios
    If HRP1000 table has changed for some reasons'  and 5000(ORG UNIT) will create 2 records
    Ex: 5000  jan 1 2005 dec 31 2009
                    jan 1 2010 12/31/9999
    This 5000 should't pick up as it has end date 12/31/9999 ok...
    EX: 5001         JAN 1 2006  OCT 1 2007
                           OCT 1 2007   MAY 5 2009
    Last record:    MAY 6 2009  Feb 6 2010
    So this 5001 org unit should pick up as this last date is FEB 6 2010.
    Sas
    Edited by: saslove sap on May 3, 2010 1:59 PM

  • Best Practice - Changing description for Org Unit/Position or creating new?

    Hello Freinds,
    I just want to know from your experience what's normally practiced in your implementations for OM :-
    For scenarios where there is a need to change the description of a particular org unit or position, do u
    1. just change the description effective a particular date (to maintain history) or
    2. put an end date to those objects and create new ones ?
    Solution 1 is quick and easy, but in IT0001 the description displayed is as on start date of that infotype which is normally a date prior to the change in desc of those objects. As a result this infotype keeps displaying old description.
    Is there any way to change this display to show the current description instead of the description as on start date of this infotype ???
    Solution 2 calls for a lot of related activities, say if i create a new org unit and delemit the old one - then i have to move all the sub org units and positions into this new one ... which is quite time consuming and doesn't really seem practical.
    How do u manage such scenarios ?
    Thanks
    Allen

    We use option #1, although I am not sure this is best practice.  Using option 1 for positions makes it challenging when it comes to reporting on length of time in position.  We frequently have the scenario where a person is reorged not because they applied for another position, but just because the big wigs want to move around the chess pieces.  In these cases we simply modify the position attributes and then run a PA action.  Then if you run a query and use the standard delivered Length of time in position field, it appears as if the person has been in the same position for years (which they have), but their position has been retitled, re-graded, and re-orged numerous times.  This makes it very difficult to get to an employee's length of time in their role. 
    This is a great discussion question I hope more people respond with what they do and why.

  • HR report/tranzaction on current and past org unit, position, job

    Hi,
    Does anyone know the code of the standard report / tranzaction to show the current and the past org unit, position and job for an employee?
    Thank you
    Adriana

    Hi Adriana!
    Please try using Headcount Changes report  S_L9C_94000095.
    Regards!
    Woody.

  • Cost center and org unit missing in payroll report

    Hi Gurus,
    Our HR administrator has moved a position from one org. unit to another via PP01 - she has done this via a change action and not copy thus the record went missing and caused staff for that position with no Cost Center & Org Unit.
    Although the position has been reinstated back to the old org. unit, and relationship shows correct cost center and org. unit - still the payroll report does not pick up the same attributes.
    Please help.
    Thanks,
    MVM

    hi ,
    is the cost center data correctlly stays in 0001 infotype  ?
    if your connections are normal in pp01 1001 infotype , you can run rhintexx programs.

Maybe you are looking for