Org. Unit coming as blank in Infotype 0001

Dear Folks,
I have maintained a position for the Employee in Info-type 0001 but the org. unit which comes as default with the position is coming as blank. Though i have check the relationships and they are maintained very well. When I'm running the org. reassignment and checking the Info-type 0001 its showing the Org. unit.
Is there any way in which org. unit can come directly and i do not need to run any action?
Thanks & Regards,
Esha

Try checking the tbale V_T77s0 for below integration switches
PLOGI ORGA --> Should be X
PLOGI PLOGI --> Should be 1
PLOGI PERLI --> Should be  99999999
If still the problem exists,
Try to run the below reports once
RHINTE10 uses for integration between OM & PA. (OM should install going for PA)
RHINTE00 uses for integration between PA & OM.(PA should install going for OM)
RHINTE20 uses to run consistency check between OM & PA.
RHINTE30 uses for integration between PD & PA.(PD should install going for PA).
PLOGI feature if it is "X" then it means OM AND PA integrated and vice versa.
Good Luck...!
KK

Similar Messages

  • Org Unit blank

    Hi,
    The org unit detail is blank in the assigment page of a requisition.
    Scenario: On Recruiters Dashboard under My Open Requisitions, select a requisition and press Assignment button. Assignments for the Requisitions page should be displayed in a new window. In header, Requisition name, Hiring Manager name, Status of the Requisition, Org. Unit, Recruiter and the Release date should be displayed. Here Org unit, details are blank.
    Why org unit details are not displayed? We are working on EHP5.
    Regards
    Savitha

    Try checking the tbale V_T77s0 for below integration switches
    PLOGI ORGA --> Should be X
    PLOGI PLOGI --> Should be 1
    PLOGI PERLI --> Should be  99999999
    If still the problem exists,
    Try to run the below reports once
    RHINTE10 uses for integration between OM & PA. (OM should install going for PA)
    RHINTE00 uses for integration between PA & OM.(PA should install going for OM)
    RHINTE20 uses to run consistency check between OM & PA.
    RHINTE30 uses for integration between PD & PA.(PD should install going for PA).
    PLOGI feature if it is "X" then it means OM AND PA integrated and vice versa.
    Good Luck...!
    KK

  • No entries for org unit, job or position in T5KWB

    Hi Experts,
    I am running payroll for canada , i am getting this error for 2 employees for whom the org assignment been chaged recently -
    now they are giving , kindly help me - i have checked this table T5KWB and it dosnet hold value maintained for org unit
    50737186
    KTXDM Canadian Tax Infotypes Data Management
    Input
    P0461
    P0462
    P0463
    P0464
    Processing
    No entries for org unit, job or position in T5KWB
    Search in organization structure failed
    Check T5KWB for org unit 50737186 or higher-level org unit for 20101031
    Thanks
    Jay

    Hi Jay
    Get the position of the employees for whom you are getting the error message and maintain infotype "Canada Groups for WCB" for those positions. This should solve your issue.
    You may want to go through below link:
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/WCB
    Hope this helps
    Best Regards
    Reddy

  • Separation Action: Infotype 0001, Org Unit not blank

    Hi  All,
    Can you tell me what has to be done for IT 0001 during Separation action?
    IT0001 is in copy mode in V_T588D for separation . The thing is, when i am trying to separate the employee, the position is defaulted to 99999999 but Org Unit and Job do not change, Which is ideally incorrect, the should be blank as position is linked to O and C.
    Can you help me resolve the issue?
    Reagards,
    Shweta

    Hi,
    when you said
    Which is ideally incorrect, the should be blank as position is linked to O and C.
    when you are hiring a person you are assigning a position then O and C are defaulted with that.
    if a person is getting separated then changing the position to default position is correct.
    there is no point in delimiting the O and C for the person at separation action.
    we dont have any default O and C as Position(99999999), with this pointer you can understand.
    Regards,
    mohammed

  • Change Org Unit in 0001 Infotype

    Hi Experts,
    Ple guide me how to change the Org Unit in Infotype 0001.
    The scenario is we have not assigned Org Unit to some employees while uploading.  Now we have to change the Org Unit in 0001 for some 50 employees. 
    What is the procedure to be followed?
    Regards
    Venu

    Hi Venu,
    If you had already uploaded the Position for 50 employees in IT 0001 than just maintained the Position to Org unit relationship  and org unit will appear in IT 0001.
    if you had uploaded the master data with Default position, than you need to create position  or assign the existing position with the person and create the relationship with the org unit
    you may use TC PPOME, PP03 OR PP01
    Trust this will help you
    warm rgds
    vishal saxena

  • RHINTE00 - Position and org unit deleted in infotype 0001 not transferred

    Hi all,
    we are using report RHINTE00 to transfer the assignations with positions and org units made in infotype 1 to PPOME.
    Everything works fine when we are assigning a position and org unit.
    But when we remove the entry and run the report, the assignation in the PPOME still exists..
    Do I have to do something special to delete the relationships ?
    thanks in advance !!

    Hello,
    If you have terminated some employees, to remove relationship without existing objects, you have to use report. RHCHECKRELATIONS. Then if you just need to delimit them, make sure that org. unit exists in table T527X and rerun report RHINTE00. Hope it helps,
    Regards
    Christine

  • Org Unit not defaulting in 0001 after running RHINTE 30

    Dear SAP Gurus,
    We are facing a problem where in Org Units in Infotype 0001 are not getting defaulted after running the RHINTE reports. We have done the integration between OM <--> PA, however after running the RHINTE reports the org unit is shown as 00000000, could anyone please throw some light on this?
    Regards,
    Bijoy

    Hi Bijoy,
    Are you using the department flag functionality? (T77S0 switch PPABT PPABT)
    I came across the same issue as you and i found that when department flags were checked for organisational units the Organisational Unit numbers were displayed correctly.
    If any positions that report to Organisational units directly or hierarchically have no department flags ticked the Organisational unit number will be displayed as all zeros on the IT0001 record for employees assigned to these positions.
    Regards,
    Ash

  • Not able to update organizations units in an infotype 0001

    Iam unable to update organizational units, positions through lsmw in an infotype 0001 if i do manually it is updating in 1infotype.
    Iam trying to run reports rhinteoo still not able to figure it out
    experts share your experience on this

    Ran LSMW Record created successfully for position
    If I see in organizational Assignment Infotype The record is not displaying
    As per your email Iam trying reports to display organizational units for the positions
    RHINTE10
    Done Livrun
    Next step RHINTE20
    My position is not in the list that is 600450
    Executed RHINTE30 I wonder how do we come to know personnel number when we are recording positions and organizational units. Still i checked personnel number in organizational assignment infotype and executed but it is displaying No batch input folder created . Yes we didnt create any batch input for personnel  numbers we created batch input for positions and org units.
    I believe we need to run first two records
    After running above reports i checked in an organizational assignment Infotype . Still data is not updating what would be the cause please let me know

  • Infotype for org.unit

    hallow
    i wont to buield infotype for org.unit
    i thihnk i have to use ppci or ppcj but i dont now how
    please help
    regards

    Hi Antonio,
    Why you want to separetly create Infotype for Organizational Units???
    Once you create them through simple maintainince by default 1000 & 1001 will be maintained. If you create Org Unit through Expert Mode you need to maintain them mannually. And select from the Infotype Menu which ever Infotype you want to maintain.
    Regards
    Pavani
    <b>Remainder: Points to be given on Answers</b>

  • How not to Copy PD infotype records while copying an object (eg org unit)

    Hi Experts!
    Is there a possibility exclude an infotype from copying while we copy an object for example org unit (o) or position (s)?
    We have a custom infotype that holds unique data for this particular object and should not be copied automatically, but unfortunately when we copy for example a position, this record is also copied automatically.
    Please Help!

    Hi,
    Please follow SPRO>Personnel Management>Organizational Management>Hierarchy Framework>Exclude Infotypes when Copying Internal Objects and make the desired entries for object type and the custom infotype.
    Go through the supplied SAP documentation on this IMG activity for a better understanding.
    Hope this helps.
    Donnie

  • BDC for mass uploading Org Unit infotype

    Hi,
    I need do a mass uploading for one Org Unit Infotype via BDC. I created BDC batch loading file via SM35. I used PO10 to create Org Unit Infotype. After running  TC "PO10", I need scroll down several Infotypes to reach the one that I need mass upload.  But looks like BDC does not recognize the u201CScroll Downu201D, the batch loading file record by SM35 always selects the incorrect Infotype of Org Unit. Any suggestion to fix this? Thanks.
    Regards,
    Jim

    here you go,
    ABAP Development

  • How to Restrict Creation of Infotype Record for Certain Org Units?

    Dear All,
    Requirement:
    Org Unit 1 does not have overtime. Even the employee works overtime, they will not get overtime compensation.
    One of the option is to disallow the creation of IT2005's record for all the employees in Org Unit 1.
    Is it possible to do this through standard SAP?
    Thanks a lot.

    Hi,
    The best way to control this will be with Authorizations so that people belonging to one Org.unit should not have IT2005 mantainence.
    Let me know if u have any concerns on this.
    Thanks
    Swati

  • Org Unit Field in IT 0001

    Hi Folks-
    The Org Unit field in IT 0001in PA is not capturing the ORG unit stored in OM.Integration is active between OM and PA currently.The Job and position fields are carrying over without any issues.
    Used RHINTE30- and the org unit is allready there in Table T527X. What is the solution?

    Hi,
    I got the same prob, and resolved with the following. Replied for general help purpose.  As this  post is from Dec, hopfully u hv already done.
    please do the following steps.
    **Go to Tcode SA38
    1- Run report RHINTE10
    program allows you to create object types in Personnel Administration (HR-PA) which have already been set up in Personnel Planning and Development (HR-PD) and which are needed for integration. dont forget to uncheck "Test" check box.
    The following object types are relevant to integration:
    PD  PA
    Work center (object type A) Tables T528B, T528T
    Job (Object type C) Tables T513, T513S
    Position (Object type S) Tables T528B, T528T
    Organizational unit (Object type O) Table T527X
    2) Run RHINTE20
    This program can be used to check whether the relevant object types for integration have been created in both Personnel Administration (HR-PA) and Personnel Planning and Development (HR-PD).
    The entries in the HR tables T513/T513S (job), T528B/T528T (position, work center) and T527X (organizational unit) are compared with the corresponding objects that have been created in the HRPnnnn file for PD in the integration plan version.
    Objects that are missing either in PA or PD can be created immediately
    3- Also check ur org struct in PPOME.  Hope ur prob will b ok with 1st two task
    regards,

  • Org Unit and Cost Center not displaying in 0001 with A012 relationship

    Hi Guru's,
    Kindly help me in this regard ,
    Whenever i hire a person to a position which has an A012 relationship (Chief Position) then Org Units and Cost centres are not getting displayed in IT0001 .
    But when i hire a person in the same org unit with A003 relationship ; both Org units and Costcentres are getting displayed
    I have used an LSMW for uploading relationships and objects and i have also run integration reports for the same but still i am not able to display org unit and cost centre in it0001 when i hire a person with A012 relationship .
    Kindly Help

    both great advice, also, check this link:
    http://help.sap.com/saphelp_45b/helpdata/en/14/d22fe48435d111950d0060b03c6b76/content.htm
    within this information there are various reports to run, which help recon OM and PA integration.  it will help you find your data problem and then fix the data for you if you follow step by step.
    best regards,
    michael

  • Cost center (KOSTL) is not updating in HR master table for infotype 0001

    Hi ABAP gurus,
    We have one interface where we are posting the HR master data using the IDOC (IDOC_INPUT_HRMD) into SAP.
    While updating cost center, We have one issue regarding infotype 0001.
    It is working fine for all the fields except: KOSTL, ORGEH, STELL.  Surprisingly the created IDOC contains the value in these fields but it is not getting updated in master table PA0001. I have tryied inserting the value manually and it is working fine and tried with BDC Programming and no issues. Only we have this issue while we want to use the IDOC. This is mandatory in our interface.
    While debugging the IDOC function module I found that one condition is there for these three fields.
    CHECK NOT inte IS INITIAL. where inte value is being fetched from table t77s0 based on
    GRPID = PLOGI
    SEMID = ORGA
    In this condition I see no value for this combination and hence it is not getting further. I am not sure how this condition does exist for only these three fields and not for others.
    Can any please provide the reasona and solution for this.
    Appreciate the help in advance.
    Thanks,
    Jitender

    Dear Mohan,
    Try assigning your cost center to position it will default both your org unit and cost center.
    Cheers!

Maybe you are looking for