Org unit doesnt exist but I getting error by HRBCI_ATTRIBUTES_BUFFER_UPDATE
hi
Gurus, i have an issue with Org. Model, an Org Model was created and transfered from customizing box to testing box, then one error was issued when running HRBCI_ATTRIBUTES_BUFFER_UPDATE report: "missing COUNTRY for xxxx org unit". then I checked it in ppoma_crm and HRP1000 table to solve it, but it does not exist in the system, so my Org, Unit determination rules are not working due this error.
Has anyone gotten that error for that kind of ghost Org Unit, how can I figure it out??
Thanks in advance
You can set breakpoint at message -> get line in program there message appears and follow solve the problem.
Similar Messages
-
im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
Tried to update ITunes, but keep getting error: Service "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
So how do I get my ITunes back?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Im trying to buy a song from a album but i get error that it is no longer available. The other songs is working and its a new album. I typer in the wrong password on this song. Could that be the issue?
Never rely upon the iTunes Store to always have your purchases. Always keep a copy of everything safe on a backup drive at home.
"After you download your purchases, back up your iTunes library. Previous purchases may be unavailable if they've been refunded or aren't on the iTunes Store." - http://support.apple.com/kb/ht2519 -
trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...
The work offline option can be found from Firefox button -> Web developer or from the menubar toolbar -> Work offline (Or at least thats what happens in Windows).
Have you any other reason for being offline; router off, firefox not dialing up or whatever. Or is security software or a firewall blocking firefox, or a network connection, or firefox setting etc set wrongly.
See also
*[[cannot connect after upgrading firefox]]
*[[options window - advanced panel]]
* [[error loading web sites]] -
I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?
Hi ratcat14!
I have an article that can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
trying to update to ios6 on iphone 3gs but keep getting error code 1403
Try updating over Wi-Fi:
Settings > General > Software Update. -
My billing address is correct, but the i keep getting that my security code is incorrect and can't download apps. I have re-entered all of my information in my account, but still get error message. How to over-ride?
If you have American Express, your 4-digit security code is on the front. If you have VISA or MasterCard, your 3-digit security code is outside the signature block on the back of your credit card. It happens to me also.
-
I have installed Adobe digital additions and have tried to authorize but keep getting error message "Connection error" . The internet connection is working and I do have an Adobe ID can you help please.
I have been using Adobe reader for PC to download my eBooks but the eBook Vendor has switch to Digital Addition,this is from sjpt,
Try completely removing any authorization using ctrl-shift-D to ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your Adobe ID. -
Trying to download Photoshop CS3 for Mac but keep getting error message (HTTP ERROR: 404 /support/downloads/dlm/main.jsp, RequestURI=/support/downloads/dlm/main.jsp)
Jessicawaters are you trying to download from Download CS3 products? If so then please try a different web browser.
-
I'm in UK but am getting Errors 503, 105007 and 105002 when trying to update
I'm in UK but am getting Errors 503, 105007 and 105002 when trying to publish updates to 2 websites. System maintenance is going on right now in US and Australia but nothing about Europe. its Sunday 1900 here ( UTC+1)
I was getting the same errors about 20 hours ago too - surely maintenance in US won't affect Europe and wouldn't prevent publishing for 24 hours?
Any suggestions = I guess the Adobe help desk will be SNAFUFrom BC Blog Post:
Partner registration, Trial site creation Muse Publish, APIs, FTP and some admin section will not be available for 4 hours on all data centers.
If you see the errors after maintenance is complete contact BC Support. -
trying to burn CD but keep getting error message "The attempt to burn a disc failed. The burn failed because of a medium write error. Tried different speeds with no luck
The burn failed because of a medium write error. Tried different speeds with no luck
Then try to use a different brand of DVD or at least a different batch of DVD. The disk may be defective. -
TS3694 i have tried to restore my iphone but keep getting error 1015 any suggestions
i have tried to restore my iphone but keep getting error 1015 any suggestion
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
-
We are using jni.h but its getting errors, please check it this
We are using jni.h but its getting errors, please check it this
Calling from a .dll using Java and JNI - by Borland Developer Support Staff
Abstract:Basic JNI example: making a Win32 API call
Making Native Windows API calls from within a Java Application
One of the main points of Java is to be completely platform independent. However, sometimes it will occur that the developer of an
application will know that his or her application is only going to be run on a specific platform, for example, Win32.
NOTE: This example assumes that you are using JDK 1.2 or later.
Below are the steps for writing a Java application that makes a Win32 API call. The application generates a Swing Jframe and makes it
system modal, or gives it the �Always On Top� functionality, similar to that of the Windows NT Task Manager.
Steps to follow:
1. Write the Java code for the application
2. Run javah.exe on your .class file to generate a C header file
3. write the implementation of your native methods
4. create the shared library
5. run the application
1. Write the Java code for the application
import java.awt.*;
import sun.awt.*;
import sun.awt.windows.*;
import javax.swing.*;
import java.awt.event.*;
public class Frame1 extends JFrame {
int windowHWND = 0;
JButton jButton1 = new JButton();
public Frame1() {
//windowHWND = this.getHwnd();
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
public int getHwnd() {
DrawingSurfaceInfo w = (DrawingSurfaceInfo) ((DrawingSurface) getPeer()).getDrawingSurfaceInfo();
w.lock();
WDrawingSurfaceInfo win32 = (WDrawingSurfaceInfo) w;
int hwnd = win32.getHWnd();
w.unlock();
return hwnd;
static {
System.loadLibrary("windowOnTop");
public static native void WindowAlwaysOnTop(int hwnd, boolean flag);
public static void main(String[] args) {
Frame1 frame11 = new Frame1();
frame11.setSize(400,400);
frame11.setVisible(true);
private void jbInit() throws Exception {
jButton1.setText("jButton1");
this.addWindowListener(new java.awt.event.WindowAdapter() {
public void windowOpened(WindowEvent e) {
this_windowOpened(e);
public void windowClosing(WindowEvent e) {
this_windowClosing(e);
this.getContentPane().add(jButton1, BorderLayout.NORTH);
void this_windowOpened(WindowEvent e) {
windowHWND = this.getHwnd();
System.out.println("the value is: " + this.getHwnd());
this.WindowAlwaysOnTop(windowHWND, true);
void this_windowClosing(WindowEvent e) {
System.exit(0);
Once the code is written, compile it with Jbuilder or the command line javac.exe tool which will result in a generated .class file. You will use
this .class file in the next step.
2. Run javah.exe on your .class file to generate a C header file
The following line represents the basic syntax for running javah.exe:
javah Frame1
where Frame1 is the name of the argument class.
When you run javah.exe, it will generate a header file by the same name as your implementation but with a .h file extension. For this
example the .h file that was generated from the above Java code will be emitted being that it is quite large.
NOTE: Make sure that when you run javah.exe, it is the javah.exe that came with the same JDK that you will be compiling with as there may
be some issues with using a version of javah.exe that is different from that of the JDK you are using to compile.
3. write the implementation of your native methods
Now that you have your Java source and your C header file, it is time to write the implementation of your native methods.
Following is the C code that corresponds to the native methods declared in the Java code listed in step 1:
#include "jni.h"
#include "Frame1.h"
#include <stdio.h>
#include<windows.h>
JNIEXPORT void JNICALL Java_Frame1_WindowAlwaysOnTop(JNIEnv *env, jclass obj, jint hwnd, jboolean flag)
if (flag)
SetWindowPos((HWND) hwnd,HWND_TOPMOST,0,0,0,0,SWP_NOMOVE|SWP_NOSIZE);
else
SetWindowPos((HWND) hwnd,HWND_NOTOPMOST,0,0,0,0,SWP_NOMOVE|SWP_NOSIZE);
return;
You will notice several things: one is that the function signature has �Java_Frame1_� preceeding the name of the function. If there was a
package statement in the Java source, it would appear after ��Frame1_� in the function signature.
Second, you will notice the #include �jni.h�. Normally this would be #include<jni.h>, depending on how you have your libraries set up within
your C compiler.
4. create the shared library
Now you are ready to create the shared library. Using your C compiler, create a .dll file with the code from the C implementation file. Refer
to the doccumentation of the C compiler for details on creating a .dll file.
For those interested in using Borland C++ Builder:
If you have got it installed, you could use Borland C++ Builder 3 or C++ Builder 4 to create your DLL file. If this is the case, you would use
File | New... | DLL C++ Builder will then generate some code for you, and you will just need to add your implementation code to the code
which was generated.
Remember in the Java code in step one there is a line:
static {
System.loadLibrary("windowOnTop");
�windowOnTop� is the name of the .dll file. You can name it whatever you want, just make sure that you specify the appropriate name when
loading the library.
5. run the application
Finally you are ready to run the application. From the command line use java.exe and as the argument specify the name of the class that
you compiled in step one. Once the system loads your DLL, the window that the VM creates should mimic the �Always On Top�
functionality.
We are getting errors like this
�Compiling JNI.H:
Error JNI_MD.H 23: , expected
Error JNI.H 115: Declaration missing
Error JNI.H 200: ) expected
Error JNI.H 202: ) expected#include "jni.h"
#include "Frame1.h"
#include <stdio.h>
#include<windows.h>
JNIEXPORT void JNICALL Java_Frame1_WindowAlwaysOnTop(JNIEnv *env, jclass obj, jint hwnd, jboolean flag)
if (flag)
SetWindowPos((HWND) hwnd,HWND_TOPMOST,0,0,0,0,SWP_NOMOVE|SWP_NOSIZE);
else
SetWindowPos((HWND) hwnd,HWND_NOTOPMOST,0,0,0,0,SWP_NOMOVE|SWP_NOSIZE);
return;
We are getting errors like this
�Compiling JNI.H:
Error JNI_MD.H 23: , expected
Error JNI.H 115: Declaration missing
Error JNI.H 200: ) expected
Error JNI.H 202: ) expected -
My CC update keeps failing on error code 205. I have retried several times and it keeps going to error. I have tried to uninstall CC but I get error that previous update is still running.:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
Maybe you are looking for
-
List all the terms in Thesaurus
Hi all, How can I list all the terms in a Thesaurus to insert them in a table? Do I have to look for all the top terms and after to go through all their narrower terms? Isn4t there any faster way? thanks, Jose R.
-
So I've been working on a really important personal statement, deadline next friday. I was stuck in a total slump but today I sat down and typed my essay. As I was finishing up I went to double check the website to make sure I had cohered to the guid
-
BT Desktop Help still won't work with Windows 7 64...
THis has been going on for a while now. It just won't launch. Emails and screen sharing sessions have produced nothing. One phone call to a representative resuilted in them telling me that the 64 bit Windows 7 version was not available yet - but w
-
I am trying to use a subquery where rownum =1 and have and order by to get the most recent record. If I do this: SELECT A1, (SELECT C1 FROM T2 WHERE C2=T1.C1 AND ROWNUM=1) AS X FROM T1 I get a random row, so I tried this: SELECT A1, SELECT * FROM (SE
-
How do I change team member emails?
How do I change a team member's email address only?