Org unit not visible in the search

Hi All,
In the master data maintenance of the organization management , we have created an sales organization unit (O 50000XXX).
Function and attribute values for sales scenario has been maintained.
Object permitted in determination check box also checked.
while assigning the pricing procedure determination for the sales org (O 50000XXX) we are not able to find the sales org in the F4 search help.
When we are trying to key in it manually it is giving an error msg 'Sales Office O 50000XXX not available'.
Please suggest any inputs.
Thanks
Syam

Hi Krish,
Thanks for the update.
Org Data determination is working fine in the business transaction, we have maintained the Org data profile and respective determination rules.
Now we have created a new sales org unit in PPOMA_CRM.
we are trying to assign the pricing procedure to Sales area in GUI.
SPRO--Customer Relationship Management -- Basic Functions -- Pricing -- Pricing In Business Transaction.
In New entries , while searching the sales org. by F4 help.....the newly created sales org unit is not getting visible.
I tried of giving the object ID directly but the value is not getting accepted.
Thanks
Syam

Similar Messages

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

Excluding a org unit from showing in the hierarchy

(Nakisa OrgChart 4.1, Live)
Hello again,
I'm trying to exclude an org unit from showing in the org hierarchy. I was thinking that the 'Data filter' option in the org chart set up would serve this purpose.
I tried several ways (id below is the actual ID of the org unit I'm trying to hide):
ORGUNIT_ID <> 'id'
ORGUNIT_ID != 'id'
ORGUNIT_ID IS NOT 'id'
I did the above with and without quotes, single or double.
None of them seem to work. The data filter seems to be ambiguous at best. Will I have to hardcode this in the data element xml (or worse, in the function module) for this to work?
Thanks,
M.E.

Hi Stephen,
Yes this is what the org unit I want to exclude is called. I'm actually wondering when the filtering is supposed to happen. Is it at the extraction of the data in the FM? I took a look at the FM /NAKISA/OC_OU_STRUCTURE and I could not see a filtering logic anywhere in the code. I saw some authority checks though, and I'm wondering if the following method would work:
- in the SAP side, exclude the org unit from the area of responsibility of the RFC user (an RFC user is used in all the data connections)
- modify the parameters of the /NAKISA/OC_OU_STRUCTURE FM so that an area of responsibility check is performed (parameter AOR_CHECK set to 'X') on the RFC user (parameter IM_UNAME set to the RFC User's uname).
What do you think?
Thanks
M.E.

Org unit not displaying in Payslip

Hai all
In production, we have maintained Org Structure and assigned persons. Payroll live run is completed. But in the customized payslip, the org unit is not displaying. That org unit is there in the Org structure, in WPBP table also its displaying, but in the table T527x the same Org Unit is not there.
What could be the reason for not included in the table t527x, probably thatu2019s the reason why its not displaying in the payslip. ( the program picks the Org unit from T527x table)
But other Org units which are there in T527x table, are displaying fine in the payslip
Please suggest what to do
Thank you

If you are using OM module, then you dont have to maintain values in T527X table.
Instead, i guess some customisation is missing in the payslip to fetch the data. are you using HR forms or is it through PE51 you are creating customised form?
If through PE51, then from then, click on the Window and choose change. In the top of the window screen, where you can maintain the screen header information, you store
*Department : BTRTL_______________ *
This will help you fetch the department details i.e. org unit
Regards,
Pranitha

When using Google Toolbar, and I begin entering a search term, several complete choices appear, but when I click on one of them, autocomplete does not fill in the search box.

Why does the complete suggested search term not appear in the search box when I click on it?

Probably caused by search redirect Malware.
Install, update, and run these programs in this order. They are listed in order of efficacy. '''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx] 
Also, if you have a search engine re-direct problem, see this: 
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
For your SysFader issue, this "may" be the problem:
1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
2 Click on the "Advanced" tab. This will load a new page of options.
3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

Payload not visible in the XI monitor

In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the Payload is not visible in the last two steps of the monitor. We can see the Payload until Technical Routing in the monitor. But Call Adapter and Response steps do not have payload.
(TCode: SXMB_MONI)
when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
XML Message:
Receiver Grouping
 - SOAP Header
 - SOAP Body
 - Payloads
Request Message Mapping
 - SOAP Header
 - SOAP Body
 - Payloads
Technical Routing
 - SOAP Header
 - SOAP Body
 - Payloads
Call Adapter
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Response
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Any suggestions would be highly appreciated!
Thanks in advance.
Faiq

Hi faiq
This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).
regards,
Peter

JComboBox - Bottom border is not visible for the first time

JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
This happens because the list when dropped down goes out of the frame.
If have the increased the size of the Frame then i am able to see it,but i dont want to do this.
I am using jdk1.3.1_02.
Any Help would be great.
Please find the code below.
Thanks,
Sridhar.
//file: Lister.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Lister {
    public static void main(String[] args) {
        JFrame frame = new JFrame("Lister v1.0");
        // create a combo box
        String [] items = { "uno", "due", "tre", "quattro", "cinque",
        "sei", "sette", "otto", "nove", "deici",
        "undici", "dodici" };
        JComboBox comboBox = new JComboBox(items);
        comboBox.setEditable(true);
        // put the controls the content pane
        Container c = frame.getContentPane( );
        JPanel comboPanel = new JPanel( );
        comboPanel.add(comboBox);
        c.add(comboPanel, BorderLayout.NORTH);
        c.setBackground(Color.white);
        comboBox.setBackground(Color.white);
        comboPanel.setBackground(Color.white);
        frame.setBackground(Color.white);
        frame.setResizable(false);
        frame.setSize(200, 200);
        frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
        frame.setVisible(true);
}

Hello,
try this:JPanel comboPanel = new JPanel(new BorderLayout());Regards,
Tim

Drop down list(JComboBox) - Bottom border is not visible for the first time

Drop down list(Combo-box) JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
I am using jdk1.3.1_02.
Did any one face this issue.
Please let me know.
Thanks,
Sridhar.

I must be a little confused regarding your question.
You can simply change your code frame.setSize(200, 200); to frame.setSize(400, 400);When you say you are unable to see the border are you specifically talking about the border of the frame or the border of the combo box?
Lance

ESS job created not visible in the list of 'Scheduled Process'

As a part of data migration , I am required to invoke an ODI scenario using a java program which in turn is invoked by an ESS job.I'm able to do the same using a standalone application created in my jdeveloper.For incorporating this into the Fusion application I created an ADF Model Project in the hcmEss Application and created a sample javaclass and jobdefinition in the project,similar to what i did in my standalone application.
I have included my job definition in the MarHcmEss and included the MAR file in the EarHcmEss.Also I have given the jazn security for my job,similar to other visible jobs.Still the job that I created is not visible in the list of jobs in the 'Launch ESS Monitoring UI'
All this i tested using a deployment of hcmEss and hcmTalent Applications into my standalone weblogic server.Is there anything that i might have missed during the process?.I am new to ESS.
Thanks,
Ajin

I'm facing the same issue.
Also I'm unable to populate the values from the Resource Bundle in the Localization section of Job Definition.
Any help will be appreciated.
Thanks,
Sangita.

Supplier not visible in the Purchase Order Menu

Hi All,
I have created a Supplier and a Supplier Site from the back end using Supplier Conversion.
It was successful and I am able to see the customer in the Supplier menu in Payables and Supplier base menu in the Purchasing, but the supplier is not visible in the Purchase Order Menu in Purchasing.
I have Enabled the following flags in the Supplier Site Level,
               l_vendor_site_rec.purchasing_site_flag := 'Y';
               l_vendor_site_rec.pay_site_flag := 'Y';
               l_vendor_site_rec.rfq_only_site_flag := 'Y';
What else do I need to enable in Supplier level for the Supplier to be visible for Purchasing.
Please give me a solution so that I can resolve my issue.
Thanks in advance.
Regards,
Bhaskar.

Hi,
You will have to achieve this through APIs, Please do some google and refer Oracle docs.
Following are some links, which may interest you:
R12 Oracle Apps: Supplier or Vendor Creation API
Oracle EBS Technical Step By Step: August 2012
Hope this helps!
Best Regards

Request not visible in the version management of a Report Program

Hi,
We Imported an external request into the SAP System.
The request was imported successfully and a program already existing is updated with that request,
The problem is that the request number is not visible in the Version Management of the Report Program, but the other Programs have the request number visible in the version management, we could not find the request number in that particular program
We tried reimporting the request but the request is not visible.
Regards

Check the transport logs and see if there are any erros/warnings.

The "J2EE process table" node not visible in the SAP MMC

For Netweaver 7.0 - The "J2EE process table" node not visible in the SAP MMC.
Details for below
SAP Systems Manager
SAP AG
Version: 7100.109.15.8983
Window Xp
Any suggestions would be apperecited.
Thanks
Srini

It's hard to say without seeing the code for TreeTable. But they probably have something like an addNode mothod for the TreeTableNode which will take care of all the updates for you. If you want to do it youself, you will probably have to get the data Model (tree.getModel()???)behind the TreeTable and use one of the fire... methods on it like fireRowChanged(???) or fireTableChanged(???). I would suspect Sun would do it this way.

Configuration tab not visible in the costom view created.

HI All,
My requirement is:
To create a view in the standard component : BT301i_lam (Financial service item level).
For this i followed following steps:
1> Added item component through EEWB.
2> Enhanced the component BT301I_LAM to add a custom view which will show the required details created through EEWB.
3> Now problem is , after view creation , the "CONFIGURATION" tab is not visible in the view.
 Also , in the runtime repository (where i can add my view to the overview page) i am not able to find the view.
Can anyone please tell me on where i went wrong.Please also provide the correct steps to add a custom view so as to show attributes added through EEWB.
Thanx.
Edited by: abhishek ranjan on Mar 25, 2011 10:48 AM

Hi,
Try with the below code in .HTM .
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<chtmlb:configTable actionsMaxInRow = "3"
 displayMode = "FALSE"
 allRowsEditable = "TRUE"
 downloadToExcel = "FALSE"
 enableTableGraphics = "TRUE"
 id = "table"-------you can give your table id
 onRowSelection = "select"
 personalizable = "FALSE"
 selectedRowIndex = "<%= X->SELECTED_INDEX %>"
 selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
 selectionMode = "<%= X->SELECTION_MODE %>"
 table = "//X/Table"
 usage = "ASSIGNMENTBLOCK"
 visibleFirstRow = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
 visibleRowCount = "25"
 width = "100%"
 xml = "<%= controller->configuration_descr->get_config_data( ) %>" />
REPLACE X WITH YOUR CONTEXT NODE.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Mar 25, 2011 1:47 PM

Org unit not visible in the search

Similar Messages

Maybe you are looking for