Org unit s and work center

Hi,
Can i know how workcenters and orgunits are related ,can 2rgunits and 1workcenter exit,can 1org unit and 2workcenter ?
regards
Hema

Hi Hema,
It depends on your relationships between the objects. The 003 relationship - 'Belongs to' usually is used to relate a position 'S' to a work center 'A'. You can create a relationship where an org unit 'O' could be related to a work center 'A' and if you do so, you can specify the time constraint of the relationships so that 'only one may exist' (time constraint 2) or 'more than one may exist' (time constraint 3) at a time. Up to you how you want to define these relationships.
Table T778V should be your first stop to create the relationships and the time constraints. And then create the Evaluation Paths T778A so that you can assign the objects and then view them.
Work Centers are usually defined as 'physical work location'. Persons in a organizational unit could work at one or more work locations or a work location could have people from several organizational units working there. How do you see the relationship?

Similar Messages

Link for Cost Center And Work Center.

Dear Experts,
Can you Provide me the Link for Cost Center And Work Center.
Regads,
Jyoshna

Dear Experts,
I got the answer for the Link Between Cost Center And Work Center.
By using CR03 T Code we can see the Display Work Center : Cost Center Assignment Screen will appear.
we need to select the costing tab, We can find Cost Center .
Thanks & Regards
Jyoshna

HR Data Synchronization (Org Unit, Position and Employee) to SRM

Hi All Expert,
Currently, I had replicate the HR data (Org Unit, Position and Employee) to SRM thru transaction PFAL.
Each time there is a new position or new employee, I have to run PFAL and run manually by include the new position number or new employee into the program to replicate to SRM.
Does SAP have any specifiy program or step which I have follow to allow such automation? Is there any variant that I could set?
How to trigger the new Org units which are created in HR to replicate to SRM without any manual input into selection field of Object ID during running the PFAL?
We are trying to achieve automation of synchronization between changes/new creation in HR to replicate to SRM.
Thank for your help.
Paul

Hello Paul,
Below notes will surely help you..
1.The composite note for the process is 390380 - HR/ALE distribution in EBP/SRM.
2.The initial description of the process can be found in note 312090 - Integration HR -
EBP/SRM.
Thanks & Regards
Arshad

Actions for Org.Units, Jobs and Positions

Dear All,
I know how to create or copy the available actions for Org Units , Jobs and positions thro' the table T777M and run them through PP03.
Once I do it , when I want to skip some of the relationships it doesnt allow me to , the next page tab is grayed out.
I mean if we have for ex. a position reporting to a position and because he is, say CEO and I want to skip that relationship I am unable to , how to activate the skip or Next page tab ??
Regards
Uday

Hi,
Goto table T77IV click on maintain, Click on New Entries >> Enter the subgroup ( PVOB) PV - Plan Verson and OB is for Object you want to maintain the number ranges for eg : 01C for Job. >> Enter and save the record...
It will take u to the next screen >> Click on maintain intervals >> Click on Add Intervals >> New screen will appear ... enter the details as below :
NO From Number To Number Remarks
01 1 19999999 This is Object range
Note : do not enter anything in "Current Number" & Do not select "Ext"
I hope this will help you....
regards,
Navinkumar

Transaction Monitor - Org Unit (Service) and Service Organization

When using Transaction Monitor I notice that there are two available filters:
Org Unit (Service) and Service Organization
When I try and use these filters only some of the Org Units I have created using PPOMA_CRM ae visible and most of the other org units are not.
How do I make all the other Org Units I have created visible to this filter option?
Thanks
Simon

Hi Naveen,
We assign these Org Units on the support ticket in the support team field when creating the ticket. Do I need to make any further configuration as all the support teams I have entered on the tickets do not appear as a selectable option when using the Org Unit (Service) or Service Organization filters in Transaction Monitor.
I am sure there is somethign I am missing.
Thanks for your assistance.
Simon

How to change the main work center and work center of each operation when generating work order by maintenance plan

Dear experts,
I face a problem that system get main work center from equipment master data as a default main work center in maintenance plan when creating maintenance plan. however, if main work center in equipment is changed later, the change will not synchronize to related maintenance plan. if work order is generated from maintenance plan, main work order in order is defaulted from maintenance plan instead of updated work center in equipment.
another problem is that, for those orders generated by maintenance plan, the work centers in operations is defaulted from task list in maintenance plan. in most case, work center in task list is dummy. Actually the work is done by work center in equipment master data.
My expectation is how to auto replace the main work center and work center of operations in work order with the one in equipment master data if order is generated by maintenance plan? is there any standard configuration or enhancement/BADi that can help with this requirement?
thanks！
Wesley

Wesley,
Sorry - development is the only way.
Another option is to create a batch program that runs before your IP30 run(s) and updates any maintenance items and task lists with the correct work centres.
PeteA

How to read employee user's Org unit name,Org unit add and user position

Hi ,
Is there any Function module or a class-method to read a user assinged Orgunit name ,Org unit address and the user position at that org unit.
i have a given out a search on sdn but could not get the answer.
Thanks for your time
Seema

Eswar,
Thanks for your fast reply.
I found this table before.But i do not have idea of passing what paramters to get my specific org and position of an employee data from this table.
Let say i know my BP number for employee and Username of him.
i could find out his Obj id using EMP user name.
When i look into table HRP1001 using above Obj id, i could see there are 3 entries exist in table , among one of them is talking about position as
Sclas = S and SOBID = 50020832.
So how would i know by having this number , is it dealing with position and what kind of position it is,,,whether a manager or something else?
Hope you got me.
Basically am aslo looking for a FM where in i cold porvide aBP number or EMP username, where inturn i ll get a Emp position his org details.
Seema
Edited by: seema rajjot on Apr 9, 2010 8:40 PM

Factory Calendar and Work Center

Dear All
I am confused between factory calendar and work center working. Kindly guide me what factory calendar does and what work center does?

Hello,
Factory Calander :-- Factory calendar contain company specific dates such as alternate working Saturdays, Plant shutdown etc.
You can create your company factory calendar via transaction code 'SCAL'.
Assignment of the factory calendar by plant is done in transaction code 'SM30 - V_T001W'.
An example of a SAP application that uses the factory calendar is the SAP MRP modules.
Assuming that you have a specified an alternate working Saturday, MRP will postponed the planned orders to the next working day if it happened to falls on a non-working Saturday.
Work Center :--
Operations are carried out at a work center. In the R/3 System work centers are business objects that can represent the following real work centers, for example:
Machines, machine groups
Production lines
Assembly work centers
Employees, groups of employees
t-code-- CNR1 - Create
for more information go to this link
http://help.sap.com/saphelp_smehp1/helpdata/en/40/8ac473d40943ddb23def12bdb33437/content.htm
Thanks

What is the difference between Org. Unit and Work Center?

When there are Org. Units, then what is the purpose of Work Centers? Can there be an organization without Work Centers? Or Work Centers should exist for every Org. Unit?
How are Work Centers different from Org. Units. How can it be identified that this is Work Center and this is an Org. Unit? How should they be mapped?
Can somebody clearly explain this?
Points assured!
Thanks in advance,
Nivedita.

When there are Org. Units, then what is the purpose of Work Centers? Can there be an organization without Work Centers? Or Work Centers should exist for every Org. Unit?
Work Centre could be as small as a particular Desk/ cabin or as big as City...so there is no comparison of both.
Work Centres are used to indicate if we want to specify certain relationship or restrictions based on specific location, say if I want to maintain specific incentives based on Production unit, so I can define it as Work Centre..I want to define some position for handicap person,I can restrict it on a work centre.
Organisation Units and Work centres are independent and Org units can exist without Work Centres.
How are Work Centers different from Org. Units. How can it be identified that this is Work Center and this is an Org. Unit? How should they be mapped?
Work Centre "A" and Org unit "O" if you want to identify in existing structure, however if you want to define, usually we use org unit to define further structure in this where as Work centre to specify certain conditions associated with that particular location/desk.
I hope it is clear...
Thanks for assurance of points in advance...
Best Wishes

Link between HR data and Work center

Dear experts,
We have assigned operators in work center through HRMS. For the purpose of making a report we require the table into which the linking of work center data and the employee is made.
In the table CRHD a field HROID is found. This is an object id which links the work center with a table either in HR or in PP which provides the link between organisational unit/ employee. Can anybody tell us the name of the table with details?
Please help us.
Thanks
Jaikishan

Dear Vittalji,
Thanks for your prompt response.
Our requirement is as follows:
We need to create a report on details of operations done by each operators / workers for a specified period. For this purpose following assignments are done.
(HR module is not implemented yet. But we have made attempt to maintain the employee master by customising HR module little bit)
1. Employee master created in HR.
2. Went to work center maintainence (CR02).
3. Selected HRMS button.
4. Selected Work Center option.
5. Clicked on HR work center
6. Given same work center as production work center.
7. Selected 'person' from ALV list data
8. Clicked on create relationship button.
9. Assigned the appropreate persons.
By doing assume this we made assignment of persons to this work center since the name of persons are getting displayed.
We have a report to list out the workcenter wise operation confirmations for analying the daily production.
Now we want to incorporate the operators (persons) name into our report by whom the operation/production was performed.
For this purpose, while refering the table CRHD, found a field HROID (an object id). To fetch the details of persons / operators those we assigned to the work center we need the tables for linking this field HROID.
Our questions are
1. Whether the process of assigning operators above mentioned are correct?
2. What are the table-links for completing our report. i.e. only for work center to concerned operators (HR).
3. What does the HR Work Center mean?
4. What are the difference between HR work center and production work center?
Your help is requested. Points will be rewarded promptly.
Thanks and Regards
Jaikishan

Tables for Basic end date and work center for operation

Hi!
I need table name to fetch the basic end date of a maintenance order and maintenance work centers with respect to each operation in maintenance order.
Regards,
VM
Edited by: V M on Jul 20, 2010 7:22 AM
Edited by: V M on Jul 20, 2010 7:35 AM

Hi VM,
Input is Order Number (AUFNR).
You can find the Basic End date of Order in Table AFKO, filed is GLTRP.
For work center in Operations, you can use the Table AUFPL from AFKO.
Pass this AUFPL in AFVC and get the ARBID.
Then pass this ARBID to CRHD Table as OBJID, and get the work Center (ARBPL)
Regards,
MLN Prasad

Operation number and work center

I'm looking for the link between inspection plan/recipe header and operation at table lavel.
Reason: I have two inspection plan number with same group number but both has different counter and each has 4 operation and each operation has different work center.
Now I can get header info in PLKO and operation level info in PLPO table. From PLKO I can pass PLNTY and PLNNR in PLPO table but this gives me 8 entry in PLPO table (4 for 1st group counter and 4 for 2nd counter).
So my question is how to differentiate 4 operation of each inspection plan header. Even same issue facing at recipe level.
I can't find any table. Do we have any BAPI?

Detailing the above reply through SQVI.
The Join.
Selection Screen
The output
If you need you may have Header table (PLKO) also in the join to have more details.
Jogeswara Rao K

How to link Cost center and Work center?

Hi All,
We have a list of Work centers and the corresponding Cost centers. We need to know which tables can be used to connect the Work center with its corresponding cost center?
Thanks:
Siddharth

Hi Please use t-code OP42. Make sure all your configuration for work centre is there. You link cost centre in the costing tab of work centre basic data.
Hope this helps.
Thanks
Sanjeev

Read Routing and work center details from transfer order

Hello
I am using transaction LT31 to print a form for the transfer order.
The customer wants me to print a field that is in the work center details of the routing for this material and plant.
I can see this data with transaction CA02 where i enter material and plant,and then the work centers are beeing displayed.From here i can double click on the work center and see the field Supply area that i have to print.
My answer now is,how to read details on the work center starting from my transfer order number.Which is the table connection between transfer order table LTAK and the tables where i can find the work center details.
Thank you

I have found the solution:
ltak-tanum = mseg-tbnum
read aufnr from mseg and go to afko
mseg-aufnr = afko-aufnr
read plnnr from afko and go to plpo
afko-plnnr = plpo-plnnr
from plpo read arbid and go to crhd
plpo-arbid = crhd-objid
from here,we can find the arbpl and the field that i was looking for PRVBE

Routing and Work Center

My Friend,
What tables and fields I can user to create a report with link ( Work center X Routing X machine times X labor times) I need of list with this information to analysis.
I need comparete the times SAP information(Routing) verses Real Operation ( production line) by list.
Thank you for any help.
Best regards
Armando

Hi,
You should have searched or posted your question in production planning forum.
For example, check the link [Labour time and Machine time - production order table |Labour time and Machine time - production order table]
Regards

Org unit s and work center

Similar Messages

Maybe you are looking for