Org. Unit - Sub org Unit relationship.
Hi Gurus,
I could not see the suborg units under the root org unit when I used the relationship, belongs to. But I could see them when I used the relationship reports to. Which one is the correct relationship between an org unit and a suborg unit?
Points assured.
Thanks in advance,
Nivedita.
Hi,
Org unit uses the relationship..
A/B 002Is line supervisor of
That is if you map the sub org unit to root org then u need to assign
B002 --Is line supervisor of
(meaning:root org unit is the supervisor of sub org unit)
Top Down approach
if you assigning the root orgunit to sub orunit then
A002 reporting line to.
(meaning:sub org unit reporting to root org unit)
Bottom up approach
Similar Messages
-
Missing position and Org Unit relationship in PO13
Hello SAP Pundits,
I created a Position 1234 with transaction PPOM with Org Unit A and Job code X with start date 01/01/2009
Now I hire an employee XYZ with this position X from start date 01/01/2009.
When I go and see position X in PO13 it shows following relationships
1) Position 1234 - Org Unit A from 01/01/2009 to 31/12/9999
2) Position 1234 u2013 Job Code X from 01/01/2009 to 31/12/9999
3) Position 1234 u2013 Person XYZ from 01/01/2009 to 31/12/9999
Perfect till now.
Now if I change the Org Unit of the Position 1234 from A to B from date 01/04/2009 using PO13.
A new record is created in IT0001 with start date 01/04/2009 and previous record is delimited.
But now if I check the relationships in PO13 for position 1234 I donu2019t see the new record for Position 1234 and Org Unit B.
However the previous relationship between position 1234 and Org Unit A is delimited till 31/03/2009.
Why am I not able to see the assignment of Positon 1234 with new Org Unit B? Any reason why I am getting such an error?
Thanks in advance.
Regards,
Ajay HosurWhen you have changed the Position 1234 to org Unit B from 01.04.2009 then the previous relationship will not show in po13, it goes into History which you can see in Complete Position Description..
goto pp01 and select that position and create relationship with Org Unit B... am not sure why in Infotype 0001, previous record get delimited and new record got created.. -
Cost center and Org unit relationship.
Hi Guys,
I need quick help from any one of you.
Actually our org stucture is like Root-> company->plants-> costcenters( deparments)- users.
so we create org unit in the structure with some 100001 and assign users for that cost center org unit , so by doing this costcenter attribute =100001will be inherited from the cost center org unit to all the users under that org unit.
but now there is a requirement for creation 1500 users and we have many such costcenter org units in the structure.
The business will provide the cost center I need to identify the org unit for that cost center in the structure then only I can assign a set of users for that 100001 costcenter. But to do that I have lots of such cost center org units.
So if there is a any table or report available in the system where I can get the details of the description ( meaning Basic data descrition) which we enter while the while creating the org unit and the Org unit number which gets generated when we save.
I would like to search for that relation .Please help me with this information.
Regards
SrujanKHi
I am not clear what you are asking
http://wiki.sdn.sap.com/wiki/display/SRM/DownloadExtract-Graphicaloverviewof+PurchasingOrgstructureinSAPSRM
BBP_READ_ATTRIBUTES
I/P ORG ID 5000
USER:- SRUJAN
ITR_ATTR_LIST = CNT
O/P
et_attr
YOU MAY GET LIST HOW MANY COST CENTER YOU HAVE inherited
upload cost center sap given std report to upload
B_UPLOAD_COST_CENTER_ATTRIBUTE
br
muthu -
Org Mgmt Relationships - Mgr to Employee / Position
Hello experts,
We are running on R3 and I was wondering if it is possible to link employees directly to a manager for expense approval via Org Mgmt?? Currently we only have relationships between Managers and Org Units but I have been told that you could also create an "Admin" kind of relationship between a manager and employee directly which would allow them to approve expenses...
does anyone know if this is possible? Or have alternative solutions?
The "manages" relationship is the standard one we use, but if others would also be suitable then it would be great to know!
Thanks,
Euan Robertsonthis is possible through workflows. managers can approve expense in the manager's workplace or mss if applicable.
you can create a new relationship between the employees and their approvers in table t778V.
Where do the employee file their expenses? -
Org unit - Orgunit relationship
Hi Experts,
I have uploaded org unit to org unit relationship through BDC using PO13 transaction code and relationship type A0003 but somehow in ppom_old i am not able to view the relationship between org unit to org unit.
Kindly suggest.
Regards,
JAs mentioned by Dilek, t-code pp02 can be used to maintain any OM Object (but you have to specify the Object Type).
Some other t-codes are specific to Object Types
po03 Maintain Job
po10 Maintain Organizational Unit
po13 Maintain Position
po14 Maintain Task
and if you replace poXX by pqXX, you'll get the Measure for the same Object type.
Just for fun, I typed in other t-codes starting with po and got
po01 Maintain Work Centre
po02 Maintain Development Plan
po04 Maintain Business event type
etc... -
Assigning a position to Org Unit in mass upload
Hi,
I am creating Org units using PPOM transaction where i can create Many org units at a time. NOw i need to assign positions to these org units? is there any way to mass upload positions and assign to these Org units?
I have arrount 1020 Org Units to create. I created all through PPOM at a time. But to assign positions, i have to navigate to each Org unit to assign a position. Is there an easy way for this? I mean Create an Org unit and create a position at t the same time.
PS: This is for mass creation.
Regards,
Jithin.write a LSMW or BDC on PP01 or PO13 and create the position - Org unit relationship ( A 003)
cheers
AJ -
ECM spent budget was clean up when approval manager reject an org unit?
Hi HR Experts,
When an approval manager rejects an org unit, the spent budget of this org unit is clean up but the budget still distributed to each employee in that org in the infotype 0759 therefore leads to inconsistency of budget in ECM.
Is there any body experience this issue?
Thanks,
Duyi lived through this painful process very much, we made a quick SM30 tcode transaction to be able to do data maintenace on HRPADPM - this is where the budget spent amount is actually saved.
the key for this table is stored on the budget unit to org unit relationship in HRP1001.
if anyone has a better process to fix out sync spent budgets please let us know... -
To pick Parental org unit ( Root Org Unit)
Is there any Function Module which can pick the employee root organization unit.
In my code:
*zhrint02_itab-status = 'X'.*
MODIFY zhrint02_itab TRANSPORTING status
WHERE otype EQ wa_adompernr-otype
AND objid EQ wa_adompernr-objid
AND infty EQ '1028'.----
If status = 'X' it is picking the employee assigned org unit i.e Modify zhrint02_itab Transporting status
objid = wa_adompernr-objid.
Is there any way to pick the Root org unit for the emp.
Kindly suggest the code change where i have to change in the above code to get parental org unit...Hello!
I am not sure if you have already found an answer but MSS does not require you to change your existing Org structure. Many companies use position to position reporting relationship and not position to org. unit relationship with chief position holder. For MSS you can completely customize the way a manager is identified and how subordinates for the manager are identified by using function modules and perform necessary configuration in OADP.
Harald -
Change Org Unit in 0001 Infotype
Hi Experts,
Ple guide me how to change the Org Unit in Infotype 0001.
The scenario is we have not assigned Org Unit to some employees while uploading. Now we have to change the Org Unit in 0001 for some 50 employees.
What is the procedure to be followed?
Regards
VenuHi Venu,
If you had already uploaded the Position for 50 employees in IT 0001 than just maintained the Position to Org unit relationship and org unit will appear in IT 0001.
if you had uploaded the master data with Default position, than you need to create position or assign the existing position with the person and create the relationship with the org unit
you may use TC PPOME, PP03 OR PP01
Trust this will help you
warm rgds
vishal saxena -
Default Relationships in Org Management
Hello All...
I am having a big issue with the defaults of Org Management relationships. For some reason, our installation does NOT allow me to automatically create positions dependent on other positions...like 'is supervised by' relationship between positions. I have tried creating manually, and have checked the IMG for 'allowed relationships' and it shows that a position to position relationship of 'is supervisor of' is available. Any and all help much appreciated...I can't figure out how to automatically do this.
Thanks,
HopeHope,
In the ECC6 system I am working with at the moment, it doesn't work that way either. In PPOME I can create a new position from an Org Unit, but not from another position.
Must admit, I have never tried to do that in this or older releases before though. We tend to mostly use Chief positions, so any new positions are just created in the Org Unit and automatically report to the Chief.
I did notice that if I created a new position in PPOME then added the "Reports To" relationship manually (via Go To > Detail object > Enhanced object description), any copies of the positon that I subsequently made in PPOME also got the same "Reports To" relationship created automatically.
Regards,
John -
Regarding relationships for ORG
Hi Gurus ,
We are using SAP CRM 7.0 enviornment , I need to pull all the ORG's which doest have any relationship with any BP.
for more information we can see all the relationships for that particular ORG in relationship TAB .
can anyone tell me how to pull those ORGs which doesnt have any relationship.
Regards,
RajasekharDear rajasekhar ,
One thing is not clear where you want to pool this org information,
for gating any information of org you can use FM 'RH_STRUC_GET'.
if you want to determine user for org to particular transaction partner function ,
define access sequence for which will determine partner form org structure
Regard,
vijay. -
Is inventory Org possible without Multiorg?
Hi,
Is it possible to have an inventory org with out a Multiorg?Rather is it possible to create an inventory organization with out any set up for Multi Org?
Thanksit Is not possible setting-up just inventory org without any other setup (i.e. OU, LE,..)
The Set up of Oracle apps follows the following structure which is as mentioned below
Business Group>Set of Books>Legal Entity>Operating Unit>Inventory Org
The relationship mentioned above is like one to many from the top where top is BG and bottom is OU
So you need to have all these set up completed and existing to define the inventory Org,
Hope this helps
Thanks
Manish Jain -
Copy back of Prodution Error on Org Structure
Please can any of you guru's out there help.
We have just done a copyback from production to SR2 (QA system) and there is an error with the org structure.
We use extended Classic Scenrio and we replicate the org structure from ECQ to SRQ. (integrated)
All the org structure units appear when you search for them, but there is no link between any of the units, purchasing org units or groups.
The error we encounter when we try to to select one level up is the following:-
There are "no objects superior to the current start object" .
Please can you advise if you have ever come across this type of problem or any possible solution.
Thanks in advance
SharonIt looks infotype for the Unit relationship is missing. How did you copy back or replicate it ?
Regards,
Masa -
Mandatory Organizational unit when creating a position
Hi,
I would like to know if it is possible to make mandatory to create a relationship with a organizational unit when somebody creates a position using transaction PO13, or any other transaction.
Thanks a lot,
MformanHi Mforman,
You can define the A003 Org unit relationship to position an "Essential relationship" and make it the next screen to be filled when creating a position (Table t77so). This, however, does not make the respective relationship a mandatory one as one can skip this relationship creation screen.
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Apr 1, 2010 7:52 AM -
What is unit conversion.
what is unit conversion.
Hi satish,
You use the Unit Conversion function type to convert units of key figures into other key figures using unit relationships.
In the Source/Target Key Figure Conversion Type table, you can specify multiple conversions. For each conversion, you have to select the unit or quantity conversion type. The value in the target key figure is overwritten. This also applies when the source key figure is empty. The value of the source key figure is not changed during unit conversion. In this way the function can be executed more than once without the results changing. There is a special logic to ensure that this is the case when the source key figure and target figure are identical and the source unit of the data record is used: If there is already a value in the target unit, it is ignored if there are values in the source unit that do not have the target unit. Otherwise the value in the target unit is used.
With this function, only the unit fields can be characteristics to be changed.
With Regards,
Prafulla singh.
Maybe you are looking for
-
Exception in Payment Proposal - Pmnt methods for this run are not specified
Dear all, I want to ask if it is possible to run a payment proposal for AP transactions together with AR. The AR line items are used for clearing. Actually, this is the first time we execute proposal run which contains AP and AR respectively. And dur
-
BestBuy says it's a problem on Apples end and Apple seems to be doing everything to make me give up.
-
Is there any maintenance at all, to run with Lion? 6 years ago...
Maintenance? I asked this same question 6 years ago when I got my iMac/Tiger. Other than shutting down properly, making sure Firewall is on, not running any anti virus programs (in most cases) and avoiding most 3rd party utility programs. Is there an
-
Alternative for Visual FoxPro on OS X?
Does anyone knows any alternative for Visual FoxPro on OS X which can run simple commands, because I do not have any server and I do not need to work on whole programs?
-
Avoid the persistance of the data ?
Hi Guys, I am sending the raw credit card data through xi, is there any way to avoid the data storage in xi. I cannot control with user authentications or controlling the access to sxmb_moni. I should avoid the persistance of the data completly or i