Org Unit that controls shipping activities

Question- Which is the org unit that controls the shipping activities of goods?
Ans-1. Plant and storage location
Ans-2. Shipping point
Ans-3. Distribution channel
Which one is the correct?

Hello,
SHIPPING POINT is responsible organisational unit for shipping. and shipping activities
As you aware for delivery creation the SHIPPING POINT is mandatory.
The definition of SHIPPING POINT clearly says as,
Shipping point is an Independent organizational unit that performs shipping processing. You can have many shipping points for a plant but delivery is possible thorugh only one shipping point
The Organisation unit which falls under the LOGISTICS EXECUTION is shipping point and you can find the  the organisations units under LOGISTICS EXECUTION which are also responsbible for shipping like, loading point, transportation planning point.
In your question it is the SHIPPING POINT which is controlling the shipping activities

Similar Messages

  • Position to inherit company code and cost centre from Org Unit

    Hi Team,
    I have entered the company code and controlling area in my root Org. Unit.  All the sub-ordinate org units that I've created have inherited this company code and controlling area, however none of the positions I've created have inherited them.  What do I have to do to get my positions to inherit this information from their org unit.
    Regards,
    Jeanette

    Hi,
    Check table T7SS0, there are three switches
    PPOM     INHIC     X     'X': PPOM: Obligatory Inheritance of Company Code
    PPOM      INHIH     X     'X': PPOM: Obligatory Inheritance of Contr. Area
    PPOM     INHS     X     Inheritance of acc. ***. features by positions
    So just check these switches that they are set in this table, and I hope your problem should resolve
    Regards,
    guds

  • Need to get employees belonging to this org unit + its lower level org Unit

    Hi ,
        We have a requirment where in which we need to get all the employees belongs to a perticular in an     
        organization UNIT and its lower level org units.IS tehr any FM to find the same.
       i.e if we input org unit then it should return all the employees belonging to this org unit + its lower level 
        org unit(B002 relation ship)
       Any inputs are appreciated..
    Regards,
    Zareena.

    Hi Zareena,
    This is wht i understood in org management...
    evaluation path is the relation between two entities,
    entities may be
    job(C)
    position(S)
    Employee(P)
    Org Unit(O)
    O - O is line mangaer,
    S - O belongs to,
    P - S is owner of.
    i think if u observe O - O is line manger.. means in with same position
    S - O means that position belongs to the Org Unit
    P - S means the employee has that Position.
    All these type of relations will me maintained in the Infotype 1001 with the raltionships.
    All object types will be maintained in the Infotype 1000.
    Regards,
    Sreenivasulu Nallani.
    Award points if helpful..

  • OSA - Default Manager From Org Unit

    Hi everyone:
    In my appraisal form, under "Processing" tab, in "Further Template Behaviour", I have included the standard BADI (Default Appraiser - Default Manager).
    Is this BADI supposed to pick the manager (chief position) of the org unit that belongs to the employee?
    If yes, it does not seems to be working the way it should be. I can put anyone (even the subordinate of the employee) as the appraiser and the system still lets me go through.
    OSS notes does not seems to have any solution with this.
    Has anyone encounter anything like this before? Your help is greatly appreciated.
    Thanks,
    Ash

    Hi Jothi:
    Thanks for your help. I managed to get the "Default Manager" BADI working.
    However, this is not a complete functionality because the appraisee can simply change the appraiser's name. There is no control on the appraiser chosen. I can always choose my subordinate as my appraiser, which is not correct.
    I know that in "Processing" tab, we can de-select "No Authorisation Check for Appraiser". This feature will check if the user (in my case, the appraisee) has authorisation for the appraiser etc. A few questions I would like to find out
    1) Will this feature work for my scenario?
    2) To use this feature, do I need structural authorisation or just non-structural authorisation?
    3) Should i use BADI "Authority Check" instead, to cater to my requirement?
    Many thanks once again for your help.
    Ash

  • Tree of org unit

    hallow did some have a exemple of report like tree of org unit that when you open u see org unit and under org unit and employee regards

    Hi antonio,
    We can also show tree like functionality using list (and not tree control).
    1. Its quite simple.
    2. Basically there are TWO FMs,
    which do the job.
    3. just copy paste in new program
    and u will know the whole logic.
    4.
    REPORT abc.
    DATA : tr LIKE TABLE OF snodetext WITH HEADER LINE.
    data
    tr-id = '1'.
    tr-tlevel = 1.
    tr-name = 'amit'.
    APPEND tr.
    tr-id = '2'.
    tr-tlevel = 2.
    tr-name = 'mittal'.
    APPEND tr.
    tr-id = '3'.
    tr-tlevel = 2.
    tr-name = 'Hello'.
    APPEND tr.
    tr-id = '4'.
    tr-tlevel = 2.
    tr-name = 'Brother'.
    APPEND tr.
    tr-id = '5'.
    tr-tlevel = 4.
    tr-name = 'Brother'.
    APPEND tr.
    display
    CALL FUNCTION 'RS_TREE_CONSTRUCT'
    TABLES
    nodetab = tr
    EXCEPTIONS
    tree_failure = 1
    OTHERS = 4.
    CALL FUNCTION 'RS_TREE_LIST_DISPLAY'
    regards,
    amit m.

  • Send mail by org unit

    Hi friends.
    I have saw some posts about this, but I can't understand configuration details.
    How to link org unit to a send mail task step by step ?
    Is that necessary to configure anything with BASIS team ?
    Thanks.
    Glauco

    Hi Rick.
    In reality, CO functional asked me to develope this WF to send only a mail, when an account is created in FS00 transaction, to everyone in org. unit of Controlling (and below structures of it). No need of workplace message nor work item.
    Once structure code of Org. Unit. can be different between development, quality and production, I create a "general" parameter table maintained by SM30, that we can put the correct code of Org. Unit in each system. So, when WF starts, there is a Z method that get this Org. Unit code and fill in a variable begining with a "O". This same variable, I put in mail step.
    Did you understand ?
    thanks.
    Glauco

  • Duplicate period appearing in German when creating new Org Unit in PPOME

    Hi Guys,
    My users are encountering a problem when they create an Org. Unit/Position in PPOME.
    Whenever a new Org. Unit is being created (lets assume with the validity date of 01.11.2006), an earlier period would automatically be created, thus making the object having 2 periods.
    Upon clicking on the "Select Period" icon for the object in the Detail area of the screen, 2 lines of periods are being displayed.
    When i view the second period, i would see the correct details of the Org. Unit that was keyed in by the user.
    However, when i view the first period, the details are all on German language (this record was not created by the user at all).
    Therefore, i checked the tables T528B and T528T, i found duplicate records for certain Object IDs. It seems the Org Unit that was created by the user is being appended after the Org Unit that is in German.
    Any ideas on how to clean up those lines of data that is appearing in German and prevent such an occurance from happening in future?
    Thanks in advance

    Hi Duxton,
    Thanks for the reply.
    I followed your instructions but i am unable to detect anything out of the ordinary.
    I'm compared the configuration in Development again Production and they are the same.
    However, the problem i described in this thread is not appearing in Development. It is just happening in Production.
    Any other ideas?
    It's not really affecting my client's business process but i would like to know what is causing it out of curiousity

  • Cost Center Inheritance from Org Unit

    Good day all,
    Can someone please advise regarding cost center inheritance from org units?
    I understand the inheritance concept, however simple need to know if the CCenter is added to the org unit via A011 relationship, does the system physically create a A011 relationship on the position inhertiting the cost center from the org or does the system simply pick up the realtionship from the org unit relationsip for use in IT0001 field KOSTL (cost center)?
    Thanks guys, have a lovely day!
    Christy

    Hi Christy,
    As we know cost centre(K) is an unusual object in OM.Two type of objects internal  whose master record are in database table beloging to sap erp hcm and eexternal object whose master data belong to other application areas.Cost centre is an external object that is used to represent origin of costs.Inheritance concept is on the basis of whoch cost centre are assigned in org plan.
    directly related cost centre is called master cost centre and they are made via A011 cost centre assignment relationsip.they can be made at org unit,position or work centre and nornmally its org unit that common.Org unit at the top are asisgned the cost centre as a best practise so that all the org units below or reporting will inherit the same.
    Similarly multiple cost centre assignments can also e made through 1018 infotype(cost centre distribution).Inheritance also applied to them aswell.
    Hope this helps.
    No Worries
    KG

  • How to find the all the org units of chief org unit

    Hi All,
    i have one cheif org unit which belongs to IT. i Just need to take all the org units into one internal table upto last org unit.
    ex: 500000 is the chief org unit then we check that belongs to taht
    550000 and 560000
    and agian 550000 is having or units
    556000 and 557000 ....
    now requirement is now i input on 500000 on selection--screen and i need to get
    550000
    556000
    557000
    560000
    I used evaluation path as o-o and used call function 'HRCM_ORGSTRUC_INFO_TABLE_GET'.
    but able to get only the just next level org units.ie. 550000 and 560000 Not others ..So is there any way where we can find all the org units that comes under the MAIN ORG UNIT 5000000.
    waiting for your valuable inputs...
    Regards
    sas

    Hi
    Use the FM: RH_STRUC_GET with the evaluation path : ORGEH.
    If you are still not able to get the required results,then go to Tcode: OOAW and find the suitable evalution path for your requirement.
    Hope definetely u will get the results.
    Regards,
    Sreeram
    Edited by: Sreeram Kumar Madisetty on Apr 22, 2009 8:25 AM

  • Org Unit with more than one Chief Position

    Hi,
    we have implemented MSS via the portal using a one-to-one relationship between Org Units and Chief Positions, and we would now like to have multiple Chief positions attached to one Org Unit.
    As far as I can tell from the SAP documentation, this should be straightforward, but the results we are getting do not seem correct.
    I have an Org Unit that has position 1 and position 2 assigned to it with relationship A/B 012 denoting that they are Chief Positions.
    User 1 is holder of position 1 and user 2 is holder of position 2. 
    Both users have the same security roles.
    The views used on the portal are configured using the MSS Object and Data Provider functionality, using the standard ORGEH view, evaluation path for root objects SAP_MANG and evaluation path objects SBES.  The checkbox 'Excl. Managers' is ticked.
    The problem is this - both users can see all the subordinate employees in the Org Unit when they log on to MSS but user 1 can also see user 2 in his list of employees, which is not correct as user 1 and user 2 are both chiefs.  User 2 cannot see user 1 in his list of employees, which we would expect.
    The only logic we can see for user 1 being able to see user 2's details is that user 1 must be somehow defined as the 'superior' Chief Position, but we have not defined this as far as we know.
    Any ideas as to why this is happening for us?
    Many thanks,
    Fran.

    Hi Fran,
    Sounds like you have set up the reporting structures and MSS properly.  I do question why two chiefs for one org unit.  As you stated, both can see all employees and so both can approve time, give pay increases, etc. without the approval of the other.  If this is want you want, then you have set it up properly.  Usually, one has to approve the actions of the other, thus, is in a superior relationship.  This can be handled by having a higher level new org unit with the higher person as chief and the lower stay as head of the lower org unit which reports to it. 
    As you have it now, both individuals have the same rights and access.  They should both be excluded from iViews if you checked the "Excl. Managers" box.  Since, you just recently made one a manager, have you checked for any date dependencies?  If the Chief #1 is selecting a view for "Current Year", for example, he would be able to see all persons who reported to him for this year, which includes Chief #2.  There are no 'superior chief' designations (except by structure), so without being able to view your configuration, my suggestion is to check all dates for the assignments and relationships vs. dates of the view.

  • Org Unit inheritance link to Parent Cost Center - is this Config?

    Hi
    We started at a new client and have difficulty maintaining the Org Structure A 011 relationships to child Org Units. The system undoes our implicit links. We want the implicit links to be there and not inherited. Is it possible to switch off the inheritance in config?
    Please assist/advise.
    Thank you, Adrian

    what do you mean when you say the system 'undoes' your implicit links? Did you mean the system undoes the inherited cc value by using the explicit cc-assignment done at an org unit level? if yes that is how sap works,...  the options are
    a. do not do explicit creation of cost center to org unit . that way assigning a cost center at the top org unit will suffice as that will be inherited to all org units down the structure. But this is not a workable business scenario at all.
    b. determine the explicit cost center assignments at each org unit level and do the assignment accordingly.
    lastly : I dont think inheritence of cost center is something you can deactivate in img.
    cheers

  • Hierarchy org unit to wad report from MSS

    Hello to all.
    I have a WAD Report that the parameters for it are: Org unit - as the root, and a year/month.
    The report receive an org unit and display data for it and for all org units under it in the Org. structure.
    I start the report from the MSS on portal.
    In R/3 in table T77MWBBWS I created an entry for that report with Reference char. = "ORG_STRU" instead of "0orgunit".
    The report ignores the Org unit that I choose from the MSS selection screen, and starts with the Root Org unit of my Org structure.
    What to do in order to start the report with the Org unit that i select and to get results for all the org. units under it ?
    Thanks, Pazit Atar

    I am also facing same problem.
    I want to know how the org unit which is selected on MSS screen is passed to backend R/3 report (which is using PNP logical db)
    PLEASE HELP.

  • Org Unit - Business partner

    Hie all,
    when org unit is created system has to create BP automatically for that org unit.
    I checked integration settings and they are all ok.
    is there anyway to have BP created org units that dont have BP created automatically?
    Is there anything else i can check?
    thanks and regards,
    Marry.

    Hie Micha,
    I tried it allready. Bit it does not help!!
    I excuted this IMG activity and entered Org unit and executed. in the next screen  it shows me the Org unit and BAsic data is RED.
    then i selected "repair and synchronisation object". Then it gave me message saying "Incorrect assignment for org. unit XXXXXXXXXX to partner  from 26.04.2011 to 00000000CP" (HRALX00_ORG280)
    "The system tried to create an assignment between organizational unit
    XXXXXXXXXXX and business partner . However, the validity period from
    26.04.2011 to 00000000CP is not permitted. This is because either the
    date field is empty, the start date is later than the end date, or the
    business partner number field is empty."
    Thanks and regards,
    Marry.
    Edited by: marrysap on Apr 28, 2011 11:20 AM

  • Not able to view reports by users under top org unit- Interactive Reports

    HI,
    We are using CRM interactive reports.
    In my project the client is having 3 Sales Org with two sales office and two sales group for each office respectively.
    When the document is created by the  sales Executiv, he and his manager is able to see it in the reports but the top person of that org unit is not able to see  the report.
       Some say the report can be viewed by only employee responsible and his manager. In my project the core team is sitting in the top ORG unit. They want to see the reports of all the sales org units.
    With Regards,
    Selvam T

    Dear Luke,
    I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
    Is there any specific step that needs to be done to see these branches.
    By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
    Regards
    Hkishan

  • Org unit tree

    hallow did some have a exemple of report like tree of org unit that when you open u see org unit and under org unit and employee regards

    U can have a look at some demo reports by SAP for tree structure development.
    SAPSIMPLE_TREE_CONTROL_DEMO
    SAPCOLUMN_TREE_CONTROL_DEMO
    SAPTLIST_TREE_CONTROL_DEMO
    Hope these reports will be helpful for U.
    Award points if helpful info.
    ~BiSu

Maybe you are looking for