Org values in dervied roles

Hello
We are 4 plants and hence we have 4 derived role for one master role, in one of the plant, Orglevel field for example Warehouse number / warehouse complex ( $LGNUM) is not maintian ( not used by this plant ) and instead of leaving blank k,  can I  give @ value in LGNUM field for one of the plant as they are not using this field.
Other plant has some values like 284, 361, 366, 364
My question : What will happen if we give @ value in the org field - if the org filed is not maintianed ( not in use for this plant)
Thanks
Damodar

Hi Damodar,
No, I mean that it is fine to leave it blank.  The red status is to tell you that there is an org level missing.  If you leave it blank or enter an arbitrary non-relevant value, the outcome is the same.
How you tidy up the roles is up to you but it illustrates that all lights being green in a role does not necessarily mean it will work better than one with no values at all.
If you are comfortable that @ is not a valid warehouse value (your func team will confirm, alternatively have a look in the IMG) then you can use that.  The important thing is that it is not value that has any significance and your use of it is properly documented.

Similar Messages

  • Role Expert: Org values Missing

    Hi,
    I ran the 3 Backgrnd jobs in sequential way: Org Value/Transaction/Activity Sync jobs and jobs were completed with no errors. I checked the log files and i see no major errors as well.
    But after completing the jobs, i tried creating a role and assign the org values to the role. But i dont see the org values under each org levels such as Company Code, Sales org etc..
    Did I miss any config steps here?
    Thanks
    Sundaram

    Hello All,
    Even we faced this issue and was resolved by running the three BG jobs again but in a sequence as follows:
    1. Transaction Sync.
    2. Object Sync.
    3. Activity Sync.
    Please try this and lemme know if you still face an issue with the same.
    Regards,
    Hersh.

  • Question on org level values in derived roles

    I have a set of derived roles for a retail org.
    They have set the org level for the WERKS object to the store number i.e. 0012. in the  M_MSEG_LGO, M_MSEG_WMB,   and M_MSEG_WWE but set it to "" in the  M_MRES_WWA and M_MSEG_WWA. Needless to stay the "" is overiding the site restriction.
    My question is, how can they allow store to store transfers and goods issues for other sites but only do POs and goods receipts for their default store?
    If the transactions in the role are using the same object, it doesn't seem like it can be done but I am told it can! I can't figure it out. Can anyone assist?
    Thanks

    If you are talking about  straight authorization object ( then your design cannot go with derived role concept )
    If your controls are only through the organizational object  only then derived role design will help
    If its a mix of both standard object + organizational level object derived role will not help you.
    Please note
    the WERKS is the organization level  in your case the plan value is 0012
    do not set the values in parent role and also do not populate this value were its "$werks"
    what is TCODE you are using ?
    Edited by: Franklin Jayasim on Jul 21, 2010 11:45 PM

  • ORG values for parameters not set in configuration

    Hi All,
    We are creating parent / child roles for FICO & MM for a project. The business requirement / configuration is such that the org values are available only for Company code and Purchasing organization. What is the appropriate way to set this up in the child roles? For e.g. should we put in * for plant , purchasing group etc or leave it BLANK
    Please provide your comments
    Thanks in advance
    Vijaya

    Hi
    FI relies on company codes (mainly) and MM relies on plant, Porg etc (again - mainly) but, without all the other objects being filled in your roles won't work.
    It depends on your client's needs I suppose but it does sound a little open to me but each set up has their own design requirements, you'll have to put * in the rest of the very many org levels (and cost centres, release strategies, etc - too many to mention at org/object) if you aren't given the information either due to lack of knowledge by the functional guys (not likely, hopefully) or a top down 'do what I say approach'.
    I'd get the spec in an email from somebody responsible for the implementation from the business and save it for the auditors...
    Cheers
    David

  • Wildcard character in Org value

    I have a requirement wherein ,I have to provide access to all cost centers with pattern 200ABUS,200CDUS,200XYUS,etc.
    I want to use 4th and 5th character as wildcard,but neither + nor ? works.I have tried 200++US and 200??US,but system didn't recognize these as wildcard character.
    System is currently on SAPKB70106 support pack for SAP Basis Component.
    Is it possible to use single wildcard character in org value?

    Hi,
    I recommend you use the search function.  There is the same topic on the 1st page of the forum. 
    In R3 role design , "filling character" for org level required
    The quick answer is that you cannot achieve what you want.

  • GRC BRM: Update Org Levels of derived roles

    Dear GRC experts,
    we are using the GRC BRM Master Derived concept and have around 100 Master roles in place.
    I understand that the Org Levels of derived roles are only once set per Org Value Map during the initial (Mass) Derivation.
    If we add a transation like VA01 to a Master role this also adds some new Org Levels to the Master role. Via "Propagate to Derived roles" the new transaction and object values are added into the Derived roles.
    For the new Org Levels these are added also but the values are not the one from the Org Value Map of the Derived role but exactly the same values of the Master Role.
    Using "Derived Role Org. values Update" does not help us here to update the corresponding Derived roles as no change to the Org Value Map has been done.
    In case a Master role has 40 different Derived roles associated this would require to update manually any of the Derived roles for adjusting the new Org Levels.
    Does anybody know how to automate this task?
    Many thanks for your help!
    Regards,
    Markus

    Hi Markus Richter
    Once you maintain the imparting role and propagate to the derived role, the derived roles will inherit the new org values from the imparting. So that at least has the org values in the derived roles but not the correct values
    Next up is to try to use the Mass Maintain Roles to update the derived roles with correct values from the org map (ensure org maps were updated first) mentioned in post
    Mass Child role Org value update in GRC 10
    Does this work for you as an approach?
    Regards
    Colleen

  • Promoting org values in development system

    Hello,
    I have to promote org value called LEC in the development system. Can anyone suggest me how to do this.
    Thanks

    Authorization field can be changed to Organization field using PFCG_ORGFIELD_CREATE by using SE38 or SA38 transaction.   Please use TEST MODE before executing into real mode.
    u2022     Organizational level fields should only be created before you start setting up your system. If you create organizational level fields later, you might have to do an impact analysis. The authentication data may have to be post processed in roles.
    u2022     The fields "Activity", "ACTVT" and "Transaction code", "TCD" cannot be converted into an organizational level field.
    In addition, all affected roles are analyzed and the authorization data is adjusted. The values of the authorization field which is now to become the organizational level field are removed and entered into the organizational level data of the role.
    Note: Table for Org Element- USORG
    Refer to Note 323817 for more detail.

  • CRM security - is look up table possible for Sales org value

    I have a requirement in CRM role where the sales organization value has to taken from a table. Since this value is different between development, Quality and production.
    Please advice if I can set the field to all the three values or is there way make the field value in role point to a table where the sales organization value will be maintained.

    Hi ,
    Did you mean to say you will have one sales org value in DEV?
    another in Quality? third variation in Production?
    If this is the case , its not a good practice
    Answer:
    If you have tried all standard options and still insist that table is the method you want to follow:
    creating a custom authority object, custom field name  with the option to have one of the three values from the table under the field name is possible (ABAP DEVELOPER should work with you on this ).
    Regards

  • Org. values

    Hi,
    I need to know the meaning of the following  org. values with a simple example:
    company code, operating concern, Businees area, credit control area,
    account type, controlling area, division, sales organization, plants.
    Also, please reveal the program that actually generates these org. values when we create a role.
    Thanks in advance.
    Ramakrishna.

    Hi,
    Organizational values are authorizations fields that are chained to the organization and should be used with derived roles. Derived roles are copies of the mother role and the menu (transactions) cannot be changed. Just change the organizational fields.You use this for other organizational parts of the company. If you have to change something in the activities you can do this in the mother role and with the right generate button do this for all the derived roles. It is a lot easier in maintenance.  It is possible to change or add authorization objects but you should not do so, this violate the derived method.
    have fun
    jan van Roest

  • Account Creation - Badi for Default values for BP Role and Sales Area

    Hi all,
    my requirement regards the possibility to create a new prospect (a link should be available in the navigation bar or create section).
    Logically, a bp role as "Prospect" and particoular sales area should be created automatically.
    I created an implementation for the BADI definition "BADI_CRM_BP_UIU_DEFAULTS". But don't know how to create the default values for BP role and Sales area:
    In my code
    assign cr_me->('VIEW') to <lv_view_name>.
      if sy-subrc ne 0.
        exit.
      endif.
      lv_viewname = <lv_view_name>.
      case lv_viewname.
        when 'AccountDetails.htm'.
    I obtain the viewname "AccountDetails" , the related context "Header". After I don't know how to proceed to obtain the related entities through the relationship BuilRolesRel and BuilSalesArrangementRel.
    Am I following the right way? Is there another solution to prepare the output for default values?
    Any kind of suggestion will be appreciated.
    Regards, Roberto

    go to spro>cross-application components>sap busines partner>business partner> basic settings>field groupings>Configure Field Attributes per BP Role
    Double click the business role which you want to customaze (e.g. 'A') and change the proper settings.
    Regards.

  • Multi Value Recertification in Role Manager

    Hi Everybody,
    Is there anything(feature) called multi valued recertification in role manager(OIA).
    Regards,
    Ravindra

    Hi Rav,
    When you talk about 'radio buttons' and right side/left side, It sounds like you're using SRM 4.x instead of OIA 11g am I correct, if not then can you tell us what version you're using?
    In SRM you see on the left-hand side the attribute, then attribute values assoicated to that attribute on the right hand side
    (In OIA its all grouped together in step 2)
    Simple answer, YES, you can bring an attribute as multiple values, and also bring in, what I believe is that you want, attribtue values assoicated to that attribute
    Example below, Attribute 1 has 'multiple values', Attribute 2 has multiple values associated to that attribute
    Application
    .....|______ Attribute 1 = Value 1
    .....|______ Attribute 1 = Value 2
    .....|______ Attribute 2
    .........................|_____ Attribute Value 1
    .........................|_____ Attribute Value 2
    To get Attribute 2 results, you need to bring in the data as a XML to get that hierarchal structure as a CSV will only give you that 1 depth.
    Regards,
    Daniel
    Edited by: Daniel Redfern on 12-Jun-2011 02:01
    Edited by: Daniel Redfern on 12-Jun-2011 02:03

  • Org. value sync job in ERM

    Hello experts,
    Scenario: Our backend system consist HR component, but we do not use it and therefore do not want to implement the HR RTA
    So my question is, Is it possible to skip the HR contents for the org. value sync job in ERM? As we encounter error when running the report, and if possible, we would like to skip the HR contents which is not neccessary for our environment.
    Appreciate any feedback for this, thank you in advance.
    regards,
    weihow

    Hello Wei,
    If your system has SAP_HR component installed then you must install the VIRSAHR component for GRC as well. Reason being that there are some function modules which are there specifically for system with SAP HR component installed. If SAP HR is there then GRC applications will use the functions available in VIRSAHR component for activities. If you do not install them then this can lead to problems. You can refer to SAP Note 1086823 which confirms this.
    Regarding the ORG value sync job, you can customize it to not to pick any specific type of data. It will pick all the ORG value related data in your system.
    Regards,
    Varun

  • Pruchase org value based on purchase group?

    Hi,
    I need to find out  Immidiate next level of Purchase ORG value based on
    Purchase group.
    Is there any tables? or function module?
    Please let me know .
    Thanks in advance.

    Hi,
        Please explain what do you want to do exactly..you are saying "I need to find Purchase ORG value based on Purhcase org, does any one can help.".!!!
       The FM "BBP_OM_DETERMINE_RESP_PGRP" gives you all the details for a Purchasing group i.e.the Purchasing Org to which it belongs to...You just need to pass the Purchasing Group details in IS_OBJECT..eg. O 50000077,then in ES_PURCH_DATA,You get the Pur ORG details.
    BR,
    Disha.
    Pls reward points for useful answers

  • Procedure for creating new Org Value

    Hi
    Can any one tell me the procedure for creating new Org Value
    thanks,
    Ssssssss

    Hi Sun...
    Use PFCG_ORGFIELD_CREATE program and refer SAP Note 323817
    Check out this thread....
    Converting Field to Org level
    regards,
    Zaheer

  • How to Change the default Search value for Field Role?

    HI,
    I went through numerous threads on how to default the search value , but does not help for my issue. Hence im posting this new thread. Please provide your suggestions on how to achieve this.
    For the Ship-to party field (in item detail )  on webui when i do a F4 help i get the pop up with various search criteria and  for the field Role the default value is "Ship-to party".  which is visible. we need to change this default value to Prospect which is available in drop down.
    The attribute is STRUCT.ROLE  and view BP_HEAD_SEARCH/SearchHelp . The method GET_DQUERY_VALUEHELPS  from the context node class is called to fill the value help for this attribute, but i dont understand how the ship-to party is filled as default. There is no code in this method to default the value.
    The generic GET_V_S_STRUCT method also does not default the Ship-to party on this field.
    I want to understand how this Ship-to party is filled by default and how can i change this to prospect..
    Many Thanks,
    Shaik

    We had a same requirement of defaulting Sales org and division in search criteria for a specific value.
    this can be doen by redefining "DO_PREPARE_OUTPUT" method in IMPL class for the respective view.
    See the code:
    METHOD do_prepare_output.
    *CALL METHOD SUPER->DO_PREPARE_OUTPUT
    **  EXPORTING
    **    iv_first_time = ABAP_FALSE
      DATA:
        lr_qs TYPE REF TO cl_crm_bol_dquery_service.
    * Get current query object
      lr_qs ?= me->typed_context->search->collection_wrapper->get_current( ).
      IF iv_first_time = abap_true.
        lr_qs->clear_selection_param_values( ).
        lr_qs->delete_empty_selection_params( ).
    *   if l_sales_orgs is initial.
        CALL METHOD lr_qs->insert_selection_param
          EXPORTING
            iv_index     = '1'
            iv_attr_name = 'SALES_ORG'
            iv_sign      = ' '
            iv_option    = 'EQ'
            iv_low       = 'O 50000514'.
    *   endif.
    *   if l_dist_chan is initial.
        CALL METHOD lr_qs->insert_selection_param
          EXPORTING
            iv_index     = '2'
            iv_attr_name = 'DISTR_CHAN'
            iv_sign      = ' '
            iv_option    = 'EQ'
            iv_low       = '01'.
    * endif.
    Hope this will help..
    THanks & Regards,
    Amit

Maybe you are looking for