Organisation model update

Hi Gurus,
well here is some bizarre problem ..in CRM development server we upgraded to Enhanced version and we got some error message " is_sa_off is not invisible in sale scenario" while mapping sales office with r/3 sales office, then we checked T077MATTR and did necessary setting like checked mark "buffer" , and invisible mode.
then finally run "HRBCL_ATTRIBUTES_BUFFER_UPDATE" to delete any buffers..
the problem resolved.
And then finally we transported the T077MATTR to CRM testing server..and ran same report... but still when we try mapping it with R/3 org. units it shows same message....
and even while maintaining BP data like relationship we assign partner function with sales data..it shows message "sales org.unit does not exist".
and yes we have BP created for sales org unit.
note in CRM testing ....we are still using standard version.
Please help me resolve this issue,
Thanks,
Gaurav

Hello Gaurav,
The problem should be with t77omattot settings.
Could you please compare the settings between two systems?
For is_sa_off, the object type shoul be 'O'.
Best regards,
Maggie

Similar Messages

Update an organisational model from an Excel file.

Hi,
I have made an extraction of an existing organisational model in an excel file.
Is it possible to update the existing organisational model or create a new one from the excel file?
Any standard program or function module that can help me to do it.
Thanks,

Hi,
I think two interesting FM could be
BBPU_CREATE_ORGUNIT_AND_BUPA (O creation)
BBP_UPDATE_ATTRIBUTES (PPOMA attributes)
I hope this help
Jorge

Attributes in Organisation Model.

Hi all,
I have a general question regarding the Attributes in Organisation Model.
For example: when we Set the attribute of a country to GB or US. It inpact it would
bring...?
Regards,

Hi Usman,
I have used attributes to generally identify the Org Unit.
If you set the country attribute as US, you can check in your implementation for this attribute value and perform the desired function.
Hoep this helps!
Regards,
Saumya

Facing problem in adding attributes for sales in organisation model

hi i am murali
for my organisation model in sales organisation i want to add division and distribution channel attributes.when i am in ooattrcust
transaction,i found that they were in invisible maintenance and i am not able to change them.please help me

Hi,
Please read:
Orgmodel-- Attributes
1. Goto T. Code: SM30
2. Enter T77OMATTR for Table/View and click Maintain Button.
3. Now Double click on Attributes. Here create your oun Attribute by copying an existing one / Create a New Entry.
Here you also have setting like Multi Values, Default Values etc.
4. After creating New Attribute, double click on Scenarios and select your required scenario then click on Attributes/Scenarios.
Here you include your newly created Attribute. Here you also have important settings like Inheritance Type, Reg Attr etc.
Alternatively you use T.Code OOATTRCUST instead of SM30.
Once this customization is done you can see your attribute in the Org Model Customization(T. Code: PPOMA_CRM).
HRBCI_ATTRIBUTES_BUFFER_UPDATE
Denis

Model update validation in between wizard-style pages before commit

Dear All,
We have a number of wizard-style pages (generated by JHeadstart). We navigate between pages using a <af:singlestepbuttonbar> control. We'd like to be able to validate model updates when navigating (next) from one
page to the next, rather than having to wait till the Commit action on the last page.
The model validations should only be performed for model updates that are relevant for the current page being navigated from.
Any suggestions on how we can achieve this would highly be appreciated.
Kind regards,
Ibrahim

hi Ibrahim (user617110)
Since you say you are using JHeadstart, maybe you can get a better answer in this forum
JHeadstart
(tip : You can use "Your Control Panel" to make your name visible in forum posts.)
success
Jan Vervecken

Determining Partner in Lead transaction thru Organisation model

Hello,
I need to determine responsible employee in lead transaction thru Organisation model that I have created . Now I dont want to use the attributes of the organisation as we have some constraints in that I need to determine a partner out of the assignment I have done in Organisation model. eg If BP "0001" is assigned to Org unit A as employee(Holder of a position) is it possible for me to determine the same employee in lead transaction as Employee responsible if I give the input of org unit A in the transaction? If yes pls let me know the steps for doing the same.
Thanking in anticipation.
Ambrish

In SPRO Customer Relationship Management > Master Data > Organizational Management > Organizational Data Determination >Wizard for Organizational Data Determination > Create Determination Rule of the Responsibility Type.
There, you assign a name, scenario (Sales or service) and select an attribute for example: SA_RESPORG Responsible organization, then assign Organization unit. After you assign profile to transaction type Lead.
Regards

User not integrated in the organisation model

Hi gurus,
i am not able to integrate user into organisation model.when i use USERS_GEN,T-code to assign ,it shows action cancelled.pls let me the reason and solution.
message no:BBPU_MEssages001

Hi Kalai,
To assign your user to the organizational model:
1. Create your own business Role
a. Call transaction PFCG and copy std profile to Z profile.
b. Execute Transaction CRMC_UI_PROFILE
c. Copy business role say SALESPRO to ZSALESPRO incl. all related objects and assign your created PFCG role.Press the skip button if you get en error message.
2. Assign your created business role to organizational model
a. Call transaction PPOMA_CRM
b. Search organizational unit by u2018Structure Searchu2019 and browse the organization you need to add to.
c. Create a new position and save your changes.
d. Assign your created business role to the new position.
Mark your position and select in the main menu Go To -> Detail object -> Enhanced object description
On tab u2018Activeu2019 select u2018Business Roleu2019 and create a new infotype.
Enter your created business role and save.
3. Assign your user to the organizational model
a. Go back to the organizational model or follow steps 2.a to 2.b again.
b. Mark your position and assign your user to this position. On the popup select u2018Holderu2019 .
c. On the search help select tab u2018User by address datau2019 and search for your own user
d. Save your settings and relaunch the WebClient UI (call transaction BSP_WD_CMPWB, select CRM_UI_FRAME as component and press u2018Testu2019-button) to test your changes
Hope this helps!
Regards,
Saumya

CRM Organisation Model datasource

Hi gurus,
can anybody please suggest me what are the datasources for extraction of Organisation Model from CRM? points will be rewarded for helpful answers.

Hi there,
I encountered the same problems and I was told to read note no. 681722.
The problem isn't solved yet because I'm dealing with it only now but probably this note helps you, too.
It seems you do need datasource 0CRM_HR_PA_OS_1 because the extractor 0CRM_ORGUNIT_HR01_HIER does not deliver e. g. the relation between org unit and user (at the moment I interpret user as "employee"). 0CRM_HR_PA_OS_1 delivers it via transaction data. As I interpret the note you need the transferrules for this datasource and a relevant CRM InfoCube which I have not identified so far.
The note says that one has to extract the relevant master data via 0CRM_ORGUNIT_HR01_HIER, 0CRM_ORGUNIT_TEXT and 0CRM_ORGUNIT_SALES_ATTR ...
Hope it helps.
Regards,
Doris.

CRM Organisation Model

Dear All,
I am working on a project where the Organisation model has already been set up and is now in production. The set up by the previous phase has not been done correctly (model is different in every client!) and I am now trying to find a way to correct the model for our phase. Bearing in mind that the production system does have transaction records using the current org model, can I create a new plan version and then transport to all clients? Will existing transactions continue to reference the previous model? Has anybody any experience of cleaning up this kind of mess! Any help much appreciated.
Thanks,
Dav

hi there
since u said that u want to begin afresh and want the same set up in all clients
just delete the existing org model in all clients if they don have any further usability,after u delete the org model manually
run this report
HRBCI_ATTRIBUTES_BUFFER_UPDATE
it will refresh ur org buffer and all those previous instances will get deleted
also run the t code for indeaxing the org
CRMD_INDEX_OM
and there give object type as O
it will clear all the stuff ,then u just transport ur new version in all the clients,also when u create ur new org model try through the FM not manually.
best regards
ashish

Schedule Model Updates - Deleting / Looking the schedules

Hi
I used in the BICA connector
http://server:port/strategy/bi/admin_bic.htm
very bottom selection is SCHEDULE MODEL UPDATES to schedule automatic updates.
Reference : Bobs reply on [thread|Re: Can periodic updates happen when using BICA tool]
But Where can I see the schedules I have set??
And How can I delete this schedules ??

quixotic-
With a typical installation of SSM, you won't find an advanced scheduling administrator. The SSM installation guide refers to an optional installation of SAP Scheduler on Netweaver, though doesn't specify how you do that.
The SAP CPS SchedulerAdministrator software for Netweaver is what you are looking for.
Download it from SAP Note 1417789
Instructions on how to deploy it at SAP Note 1161405
The SDN page with useful links to documents about the scheduler:
Scheduling
Regards,
Bob

Model updation in table /sapapo/model

Hi,
Could any body give solution to this query?
To get update the table : /sapapo/model which remote function module we can use?
Actually I have created one model using Function module RSDMESC_DB_MODEL_CREATE.
this model is getting updated in table : RSDMA_DBT_MODELT.
But I need this newly created model available in to the table :   /sapapo/model
How can I do this.Please update me.
Regards

HI,
   As per my requirement data is not getting updated in to the table /sapapo/model.
using   the function module which you have given, it is just checking the model and given the status whether it is available or not.
Regards

Service doesn't update after data model updating

Hello, dear experts!
I have a question.
I created OData Service and all is OK.
After that I have updated data model. MPC methods have been changed with my new updates. But I can't see new service metadata document, browser displays old version of it. And service works in the way like old version of data model is actual.
I don’t understand this behavior.
In the book “OData and SAP NetWeaver Gateway” I have read that it is not “waterfall” approach in Gateway, which means that we can make changes in all 3 service creation phases (data model definition, service implementation and service maintenance) in the order we want.
I tried regenerate runtime objects and reactivate service, clear browser cache, but it didn’t help.
I put external breakpoint into DEFINE method of the MPC class and send some requests to server, but debugger doesn’t open. It looks like some kind of server cache.
I think it is incorrect behavior. What would you recommend?
Thanks in advance,
Ihar

This feature is available from SP7
Go the the link below and search for "Reloads the service metadata for the annotation models."
Activate and Maintain Services - SAP NetWeaver Gateway - SAP Library

Alert Inbox disappeared after CIM Model Update

Hi, a collegue of mine has updated the CIM Model of the SLD Content concern some HR stuff.
After this the Alert-Box and Alert-Konfiguration is no longer availaible which means that i get a 404. I checked the paramters in Exchange profile like given in 750287 - even checked services in SICF but everything looks good so far.
We also restarted the Java-Stack but with no success! Does somebody has solved sth like this?
br

Is the CIM/SLD data at the same patch level as the of XI? This can cause issues.
Also, check the RWB config in the Content Maintenance section of the SLD to make sure the correct associations are still in place.

SetProperty on OData model - update multiple entities before submitChanges on batch

I have a list in my application:
This data is bound to an OData model.
If I perfrom call I can retrieve the data fod the "fridge" item:I can retieve the OData for item 456.
this.getView().getModel().getProperty("/Items(BookingId='123',ItemId='Fridge')")
Therefore I can set the couonter like this:
this.getView().getModel().setProperty("/Items(BookingId='123',ItemId='Fridge')"+"/ItemCount", 6)
But once I have done this "SetProperty" call I am now unable to set any other properties on any of the other items!
What I want is to be able to change as many items as I like and then on SAVE do a batch OData PUT to update the values in the backend.
If I'm honest what I really want is to be able to do a DEEP INSERT into my OData provider, which contains a Booking, with nested sub-items..
Booking 1:m Items
How can I do this whilst also using the "setProperty" method?
setProperty is great in regards to if I make changes and then hit "CANCEL" I can call "resetChanges" to undo any changes.. but at the moment I can only change ONE of these counters before commiting my changes...
Surely this must be a common requirement, to make many changes in the front-end to multiple entities and then POST/PUT them all at once?
Thank you for any advice

A seemingly bug in SAPUI5 ODataModel setProperty() funtion

Presariao V2375tu - 2004 Model - Update for Motherboard 7 Processor

Hi All,'
I have a compaq presariao v2375tu model with mother board "Mobile Intel 940GML Express Chipset Mainboard" I believe. I have not used it for almost 4+ years because there was problem with motherboard and was not working. An now I want to make use of it. So I want update the processor & mother board with the latest one, will it be compatible?
If yes, what are the best options with low cost as well as moderate cost.
At present even hard disk also not working can I update even that?
Please email me to {Personal Information Removed}
Thanks in advance!
Regards,
Guru
{Personal Information Removed}

Hello Guru,
If you look at your Maintenance and Service Guide manual, you will be able to see compatible updated parts. You can order these from HP Partsurfer.
Please let me know if this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Organisation model update

Similar Messages

Maybe you are looking for