Organisations implementing sap ep
hi ,
can any body list me some of the organisations implementing sap ep as their website or portal . i know that sdn is one of them
Thanking you
prasad
Hi,
Google is your friend...
Use advanced mode and search for pages like "/irj/portal". You will find a lot of SAP Portals published on the internet.
Regards,
Olivier
Similar Messages
-
Why we go for SAP ?what are the benifits to implement SAP inanyorganizat?
Hi,
Why we go for SAP ?what are the benifits to implement SAP in any organization?
Early reply is highely appruciable.
Regards,
Chow.Hi
check following link for ur doubts
http://www.sap.com/solutions/business-suite/erp/businessbenefits/index.epx
Some key points to switch to SAP is like
Focus on Business Processes
Elimination of Redundant Data (Common & Consistent Data)
Easier Corporate Consolidation
Better Managerial Control
Elimination of Interfaces
Faster reaction to changing structures
Organization/Customers/Competitors
Integration is the Key
Integration of all business modules
Major reduction in time required for accounts finalization
Easier Corporate Consolidation
Cost control Batch wise / Cost centre wise
Centralised Inventory planning and control
Reduction in Inventory carrying Costs
Best Business practices across the organisation
Elimination of redundant data
Better Managerial control
Data Integrity
Enhanced Organisational flexibility
Improvement in Personal productivity
High Data availability
Improved Order cycle time / accuracy / cost
hope this is what ur looking for
If not pls revert
Vishal... -
What are the Benefits of Implementing SAP
Could someone tell me how a company benefits from implementing SAP?
To integrate all business processes and make information available to create a decisive organization.
Focus on Business Processes
Elimination of Redundant Data (Common & Consistent Data)
Easier Corporate Consolidation
Better Managerial Control
Elimination of Interfaces
Faster reaction to changing structures
Organization/Customers/Competitors
Integration is the Key
Integration of all business modules
Major reduction in time required for accounts finalization
Easier Corporate Consolidation
Cost control Batch wise / Cost centre wise
Centralised Inventory planning and control
Reduction in Inventory carrying Costs
Best Business practices across the organisation
Elimination of redundant data
Better Managerial control
Data Integrity
Enhanced Organisational flexibility
Improvement in Personal productivity
High Data availability
Improved Order cycle time / accuracy / cost
Hope this helps you. -
Import Organisations to SAP Business One
Hi EveryOne,
I use BAPI and Batch-Import in order to import Organisations to SAP R/3 (SD).
Today I've got the question whether the things would work in SAP BO.
I'm never heard about SAP BO - just the customers asking whether our stuff would work by them.
If not, what would do the job?
Thanks in advance.
DanielHi Daniel,
There is an integration option between R/3 and SAP BO that uses Netweaver. However, if the customer is asking how you would set up SAP BO in an environment without R/3 then typically you'd use one of the import tools available for SAP BO. There is one called Desktop Transfer Workbench (DTW), supplied by SAP, which can be used to import data in various formats. There is also a SDK which would allow you to develop your own import solutions if required.
Kind Regards,
Owen -
Configuring WM in Already Implemented SAP ECC 6.0
Dear all,
In my SAP system all modules like MM,SD,FICO,PP are implemented.
Now we want to implement SAP WM module in already implemented System,
So what are the Key Points to consider While implementing the WM module.
Regards,
Rocky.Hi,
See this link below for the detail's
http://www.karkhanisgroup.com/consulting/wm-warehouse-management.html?showall=1
http://www.erpgenie.com/component/content/article/127
Regards
Bhuban -
To implement SAP HCM module in existing SAP ECC 6.0
Hi,
I have SAP ECC 6.0 system already implemented 2 years back.
I am planning to implement SAP HCM with OM, PA, SAP Time management, SAP PAYROLL in existing SAP ECC 6.0 system.
I have currently 3 system landscape for SAP ECC.
I would like to know what change/addition is required in above landscape to implement SAP HCM module in existing SAP ECC 6.0
Do share your view.
Regards.Hi.
As per you, Already designed Landscape. Why dont you follow you existing Landscape which is alredy proved for other modules.
Normally Dev/Quality/Production clients will there..
If more that depends upon flexibility in Each client and defining different business for testing and production interfaces purpose.
Better use Existing only remaining modules already sucessfully running in Production Right???? -
Does any Implemented SAP FIORI in ECC + Gateway Server
Hi Folks,
Does any one implemented SAP FIORI Apps in below scenario where ECC (ODdata components) in Sand box and Gatewayserver (UI Components) Sand box as separate machines?
We have configured Odata component (gbapp_poapproval) in ECC, and UI Component (ui5_mm_po_apv) in Netwevaer Gate way server.
Now Services got activated in Both Machines
We getting an error as "No service found for namespace GBAPP_POAPPROVAL, version 0001." while we run the application through Browser.
Do we need to install GBAPP_POAPPROVAL component also in Netweaver gateway server?
Attached Snap shot in Detail
Manage Sys Alias in ECC Server
Activated GBAPP_POAPPROVAL Service in ECC
Manage SYS ALIA IN GW Server
Activates Taskprocess Services
Error, while Browsing App
Regards
Message was edited by: Naresh ChittoorHi Naresh,
That is exactly you need to understand Gateway runtime architecture. Take your time for understanding big picture first, then move to how to setp.
OData model provider class and data provider class are on ERP.
You have to register ERP side OData services on Gateway server as proxy. It is the transaction /iwfnd/maint_service. To select service from ERP backend, you have to specify backend system alias.
Your system environment makes confusions.
+ You have Gateway components on Gateway server but you have also Gateway component on ERP
+ You have registered the OData service on ERP instead of Gateway. It is incorrect setting for Hub deployment.
Regards,
Masa
SAP Customer Experience Group - CEG -
Graphical display of best practice for implementing SAP NetWeaver
Hi,
in a presentation I need to show best practice to implement SAP NetWeaver is evaluating required KPIs, characteristics and so on and subsequently verifying the Business Content functionality and objects against these requirements.
Can anybody provide a presentation or PDF document in which this process is displayed graphically? I am looking for a significant picture / diagram ...
Any document or link to public SAP material which demonstrates the described process would be highly appreciated.
[email protected]
Best regards,
BjörnHi,
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken]
Regards,
San! -
What are the dependencies to implement SAP PM module form Financials?
Hi Experts,
Requirement is that the client does not have SAP and now asking for only SAP PM module to be implemented. Can you please suggest me what are all the dependencies we need to consider from FICO and MM point of view?
Thank you very much
Ganesh.If a company has implemented SAP without the HR module & now they want to implement SAP HR, will they have to buy a license for that? - Yes they will have to get licences for this.
If yes, what will they have to pay? - They will have to contact SAP for this and negotiate with them.
The number of employees working are 500. - The company will have to decide how many ESS licences they want to get and how many MSS licences they want to get. Again for all these ESS/MSS licences they wil have to pay separately apart from the HR licences. -
SOlman_setup issue at implement SAP Note Step
Hi Friends,
While i am performing the solman_setup (system preparation) facing once issue at Implement SAP Note step.
In this step while i am performing the post processing step (3rd step) giving the red signal The system only partially implemented the manual activities for note 1856234.
And i followed the note 1856234 as per the note i ran the report AI_CRM_ANALYZE_IBASE_SORTF and i got the error messages.
The Ibase component 000000000000003598 has deviceid: SID 00XXXXXXX
Sort string is needed!
Comp. with same device id:
Replace Sort string with (from LMDB):
The Ibase component 000000000000003272 has deviceid: SID 00XXXXXXX Etc.
Sort string is needed!
Comp. with same device id:
Replace Sort string with (from LMDB):
And as per the note
when i am executing IB_GEN i am getting below errors.
Object not found - will be created.
No changes made; Saving not allowed
Failed to save object % 1 (Object family 7001).
Kindly suggest on this.
Thank you,
Chowdary.Please refer to SAP Notes 1694004 - Dealing with duplicate technical system names (SIDs) and 1747926 - Dealing with duplicate technical system names (old SLD)
-
Can we implement SAP with SD, MM, PP WITHOUT FI?
Hi All,
Can we implement SAP MM, SD & PP without SAP FI? If so, how? Please help me
Thanks
Edited by: sk mukka on Feb 9, 2011 1:54 PM
Edited by: sk mukka on Feb 9, 2011 2:19 PMHi Mukka,
Logically, It is not possible to implement for the said modules without SAP FI.
Because, account postings can only possible with FI implementation. And these accounting posting can happen for IM transactions/goods movements while recieving the goods and while delivering the goods and also while doing Invoicing /Billing. And moreover all the materials/finished goods are have some value when there is a value for that, defnetly FI process involves.
So, you must implement FI/CO along with the said modules, inorder to update the account postings.
Hope you understand.
Regards,
Sapsrin -
Issue with implementing SAP note 1486147.
I am trying to implement SAP note 1486147. My software component is SAP_APPL and release is 603. But the prerequisite notes (1148361 and 1339658) are getting incompletely implemented with activation errors because of which I am not able to implement the main note 1486147.
I have created all the DDIC elements as mentioned in the note.Also created the smartform. Has anyone successfully impemented this note? Is there anything else to be done other than what is mentioned in the note?Hi,
Resolved the issues. Before applying the note i had made manual corrections in J_1IEWT_CERT because of which my system was not implementing the note. I reversed back all manual changes i had made and then applied the note. It got successfully implemented.
Edited by: lyviaCardoza on Sep 3, 2010 7:24 AM -
Benefits of implementing SAP GRC AC in Lifescience/Pharma.
Dear All,
Would be great if anyone could please share the benefits of implementing SAP GRC Access Controls in Lifescience/Pharma industry, more specifically which all regulations and laws it takes care of.
Regards,
Hersh.
Edited by: HERSH GUPTA on Dec 18, 2008 6:04 PMHersh,
Look for some of the Success stories out there. That should help you. Below is one of it.
http://www.securintegration.com/fileadmin/redakteur/binary/Success_Story_KRKA_SI.pdf
I too work at a Pharma client and having AC in place really helps. CC will help the internal SOX and audit team to verify that there are no SOD's. RE can streamline the role change approval process which will be of a great help when you see it from a auditor prospective. (You will always have the right approvals for the role changes a developer makes) and AE will help you reduce the paper work and the biggest advantage is the right approvals. Before using AE we used to have the paper based access request and we used to get a lot of audit issues because of the people approving roles that doesn't fall under their own space. (which will be taken very seroiously if it is a Pharma company.) FF advanages reamins the same across the industries.
Hope this helps,
Naveen -
After implementing sap note i am getting this message
You have started to implement corrections that are contained in an SAP Note. However, you have not selected any objects in the overview of the Repository objects that are to be changed. This means that the system has not changed any objects that are in correction instructions 01200615321 00001630720005.
where do i select the objects to be changedHi
The transaction code SNOTE is used to implement OSS Notes. With the SNOTE
transaction, it is no longer necessary to register ABAP objects such as report function
modules etc. manually. But data dictionary objects such as screens, tables need to
be modified manually by registering them in OSS system.
In order to use the transaction code SNOTE, the relevant transport which implement
this transaction in the system need to be transported. Please refer to the SNOTE
guide available at http://service.sap.com
this pdf will be helpful
http://www.sappoint.com/basis/snote.pdf
Transaction Code 'SNOTE'
<b>Reward points for useful Answers</b>
Regards
Anji -
We have a situation when we implement SAP NOTE 837300, the following is the information I get, Please Assist anyone.
Diagnosis
The objects R3TR NOTE 0000837300 and LIMU FUNC SO_OBJECT_MIME_GET cannot
be edited together because only one of them can be transported out of
this system. The other cannot be transported out of this system.
System Response
The function terminates.
Procedure
Edit the two objects separately.
Regards
BanganiYou have posted your question on the wrong forum. Here is dedicated to SAP Business One System Administration.
Please close your thread and find the proper one to post.
Thanks,
Gordon
Maybe you are looking for
-
List of blocked invoices purchase group wise
Hi experts Any standard reports available for blocked invoices purchase group wise ? Wht is the Tcode for that?
-
Converting excel 2013 to pdf with adobe acrobat 9
I have tried and failed many times to convert an excel 2013 spreadsheet into a pdf with adobe acrobat 9. Is this a compatibility issue, Acrobat 9 needs upgrade?
-
Subsequent credit display from PO
Hi friends, I post subsequent credit by using MIRO. And I double click subsequent credit line item from purchase order history by using ME23N. Why the Transaction in header is "2 credit memo" not "4 subsequent credit " in display invoice document scr
-
every time I start up my iMac, it just goes into OS X utilities. Even when I restart and reboot the computer it still starts up in OS X utilities how do I fix it or how do I get out of OS X utilities
-
How Can we force the Hyper-V Replica to use a dedicated network between two hyper-v hosts?
Dear Team, How can we force Hyper-V Replica to use a dedicated network between two hyper-v hosts? For live migration, we can choose the desired network in Hyper-V Manager (Use these IP addresses for Live Migration). I have two 10G adapters teamed tog