Organiser does not shoe clips DV date but filedate

using ver 8 PrEl and Photoshop El
in organiser for digital photos you can see and organise the pictures according to date when photo was shot according to EXIF metadata.
in DV clip from DV camera we have also the date and time when the clip was shot.
But in organiser shows filedate - which makes sorting useless.
is there any way to use the DV timecode in the organiser?

ok
I put in a request for this feature.
Before when using PrEl 2, I did use some software for changing filedate to DV date and time - I will have to find that again.
I also used to change filename of each clip to date and time I should go back to that I guess - when I find the software I used.
thanks.

Similar Messages

Photoshop element 10 organiser does not install but editor works well

Why the Organiser does not start since it is in the same package than that of the Editor?

Moving this discussion to the Photoshop Elements forum.

Payroll period does not correspond to master data error in INLK run & soln

Dear All,
Just wanted to share this Issue and solution which i found after debugging.
I am not sure it is 100% correct.
I am working on indian payroll and was doing lagacy data transfer with INLK schema
i was used to get error '2 payroll period does not correspond to master data'
and this was for only new joinees in that period .what i found out after debugging is
for e.g. employee is hired in 03.06.2011 .and record in t558b is
90300035 1 2011 1 2011 3 01.06.2011 31.06.2011
where 01.06.2011 is a for period begin date ,
now in payroll program this is being checked with joining date in following subroutine check_aper_versus_t558b
so it ends up with above error.now if i go and change 01.06.2011 to 03.06.2011 in T558B then payroll will be successful.
I dont no whether this is right approach but this removed that error.Just wanted to share so
It might help the members.

la diferencia es la fecha del campo FPBEG que debe ser la fecha para los empleados que no esten con el año o periodo completo
the difference is the date field FPBEG Table T558B to be the date for employees who are not full with the year or period

HT4157 I have an iPad 2 and it does not display the cellular data button under settings

I have an iPad 2 and it does not display the cellular data button under settings. It does display a Bluetooth button in its place. I have tried the reset but no luck

Is the iPad the Cellular version? Does it have an active Data plan? Does it have a Sim card installed in inside it?

LOV does not show newly added data in the same session

Hi guys,
I work with JDeveloper 11g Release 2. We use Oracle ADF to develop our web app.
In a page we have a LOV (say the page name is "a"). The related data for that LOV is inserted to the db in another page ( say the page name is "b").
When new data is added in the page "b" and goes directly to the page "a" the LOV does not show newly added data. But if the user log out and log in again
LOV shows newly added data correctly.
Is there a way to show the newly added data in the same session without logging out? Please help.
Regards !
Sameera.

Add the following method in your ViewRowImpl base class:
public void refreshLOVAccessorQueries() {
    List lovs = getViewDef().getListBindingDefs();
     if (lovs != null) {
         for (Object obj : lovs) {
            getListBindingRSI((ListBindingDef)obj).getRowSet().executeQuery();
             ListBindingDef lbd = (ListBindingDef)obj;
Export that method to the Row Client interface, add him to the pageDef, and invoke in the executables section of the pageDef:
    <executables>
<invokeAction Binds="refreshLOVAccessorQueries" id="callRefreshLOVs"
RefreshCondition="#{!requestContext.postback and empty bindings.exceptionList}"/>
   </executables>

Chart size does not extend with the data

Hi,
One of my reports has a horizontal bar and the chart size does not grow with the data. The chart displays fine if I have minimal amount of data. If the data grows, the display is bizarre, it's just messed up. Is there an option I need to set? Please provide your inputs.
Thanks
Arch

Hi,
I tried with all these options, but no success. I remember I used to get full visible charts initially. Not sure what has happened charts are getting chopped off by at least 50px right and bottom. Interestingly When I export the chart to Excel it looks perfect.
Any suggestion. Has anyone faced this issues. I am using 11.1.1.5 version.

My iPad keeps dimming on wakeup. I am on iOS 6. Auto dimming turned off. I have to go to brightness setting and touch it to get the brightness back up to my setting. It does not happen all the time but has happened more frequently lately. Any ideas?

My iPad keeps dimming on wakeup. I am on iOS 6. Auto dimming turned off. I have to go to brightness setting and touch it to get the brightness back up to my setting. It does not happen all the time but has happened more frequently lately. Any ideas?

Because GPS has nothing to do with WiFi, cellular signals, or data of any sort. GPS is implemented by signals sent by satellites that are received by GPS receivers. The receivers process the information from the GPS satellites and calculate your location. GPS never sends data anywhere; GPS functionality is receive only.
If you have WiFi or cellular data turned on this can improve the accuracy of GPS, because the GPS receiver can then use the known location of cell towers and WiFi networks to refine the GPS location. GPS by itself has an accuracy of 10 meters, or about 34 feet. Using the additional information from WiFi and cellular data this can be brought down to 3 meters (10 feet). This mode is called Augmented GPS, or A-GPS.

Rejected...We found that your app does not follow the iOS Data Storage Guidelines,

Where and how do I fix this?
We found that your app does not follow the iOS Data Storage Guidelines, which is required per the App Store Review Guidelines.
In particular, we found that on launch and/or content download, your app stores 3.54MB. To check how much data your app is storing:
- Install and launch your app
- Go to Settings > iCloud > Storage & Backup > Manage Storage
- If necessary, tap "Show all apps"
- Check your app's storage
The iOS Data Storage Guidelines indicate that only content that the user creates using your app, e.g., documents, new files, edits, etc., should be backed up by iCloud.
Temporary files used by your app should only be stored in the /tmp directory; please remember to delete the files stored in this location when the user exits the app.
Data that can be recreated but must persist for proper functioning of your app - or because customers expect it to be available for offline use - should be marked with the "do not back up" attribute. For NSURL objects, add the NSURLIsExcludedFromBackupKey attribute to prevent the corresponding file from being backed up. For CFURLRef objects, use the corresponding kCFURLIsExcludedFromBackupKey attribute.

You're submitting a Newsstand app, right? This error is still under investigation, but the current workaround is create SD (1024x768/768x1024) cover images for your HD (2048x1536) folio renditions and try again.
More info here:
http://forums.adobe.com/message/4730637#4730637

How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA input

Welcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC..

JDODataStoreException: The instance null does not exist in the data store

I'm unable to figure out how this exception occurs.
I have a class IDCounter which has a number of fields such as
'm_Name' (String)
'm_AccountName' (String)
'm_UserName' (String)
'm_Description' (String)
'm_CreationDate' (Date)
'm_LastModifiedDate' (Date)
'm_DeletedDate' (Date)
'm_Count' (long)
The filter I'm using is "m_AccountName == \"test\" && m_UserName
==\"test\" && m_DeletedDate == null"
The generated SQL statement is "SELECT t0.M_IDX, t0.JDOCLASSX,
t0.JDOLOCKX, t0.M_ACCOUNTNAMEX, t0.M_CREATIONDATEX, t0.M_DELETEDDATEX,
t0.M_DESCRIPTIONX, t0.M_LASTMODIFIEDDATEX, t0.M_NAMEX, t0.M_USERNAMEX,
t0.M_COUNTX FROM ABSTRACTENTITYX t0 WHERE ((t0.M_DELETEDDATEX IS NULL) AND
t0.JDOCLASSX = 'com.ewarna.pdm.entities.IDCounter')"
Exception Trace:
javax.jdo.JDODataStoreException: The instance null does not exist in the
data store.
     at
com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.instantiateRow(LazyResultList.java:165)
     at
com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.get(LazyResultList.java:96)
     at java.util.AbstractList$Itr.next(AbstractList.java:416)
     at
com.solarmetric.kodo.runtime.ResultListIterator.next(ResultListIterator.java:49)
     at
com.solarmetric.kodo.impl.jdbc.runtime.ResultListFactory.createResultList(ResultListFactory.java:85)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:646)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:150)
     at com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:580)
     at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:428)
     at
com.solarmetric.kodo.query.QueryImpl$SynchronizedQuery.execute(QueryImpl.java:1331)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByAdvancedFormula(BasicQuery.java:78)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:119)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:95)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getAll(BasicQuery.java:131)
     at
com.ewarna.pdm.sessions.persistence.GenericEntityManager$7.execute(GenericEntityManager.java:305)
     at
com.ewarna.pdm.sessions.persistence.GenericEntityManager.execute(GenericEntityManager.java:251)
     ... 18 more

Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
Cause and prerequisites
In very rare cases, when you store a workbook, you might not be able to open it again.
Solution
Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

HT204187 Email account does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.

External video projector - How can I hook up my Mini DisplayPort to DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?

Hi
How can I hook up my DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?
Is there a DVI adaptor already for Thunderbolt?
Thanks,
JFR

The Mini Display port and Thunderbolt port use compatible connector bodies. Your current Mini Display to DVI or VGA adapter will still work as before on the newer Thunderbolt capable machines.

ITunes does not recognize password on iMac, but I can sign in to post here, sign in on my iPad, and sync my iPad to my iMac

If I want to sign in to this message board, I can do so. I can also sign in on my iPad to download updates, purchase new apps and songs, etc. And I can sync my iPad to iTunes on my iMac.
But when I open iTunes on my iMac, it asks for my password and I can't sign in. What is causing this problem with iTunes on my iMac repeatedly asking for my password when I open iTunes?
This is very frustrating. I am also worried that I won't be able to sync when my new iPad arrives March 16. Help!

The solution (for me at least) is to keep trying the same password in iTunes on my iMac that I know is correct. For me, the fourth try of typing in the exact same password works in iTunes on my iMac. I have repeated this several times, and each time it works.
What is messing people up is that when iTunes does not recognize the correct password, people are attempting other passwords. Those other passwords are all incorrect. The problem, as you stated, is that the password was entered correctly the first time but because of iTunes having issues it does not recognize it.
People, just keep entering the password you know is correct. It will eventually recognize it, or at least this works for me. If this still does not work, reset your password (but then you may still have to enter it repeatedly in iTunes).
Apple needs to fix this.

How do I remove an old phone number from my macbook imessage. My apple ID does not show the number anymore but I cannot remove it from the imessage accounts. Its driving me mad !

Can someone please help me to remove an iphone telephone number from my imessage application. I no longer have a phone which I registered on my apple ID as a second phone. I have been on my apple ID and it does not seem to be there but cannot remove it from imessage, which still has it as an option to connect to. I am concerned that someone else who inherite this old phone will see my messages if I accidentally enable it again. I have read and re-read various postings and tried all options given but no luck, the **** thing stays there.....

Hey Chappers64!
Here is an article that will help you with this issue:
iOS: Deactivating iMessage
http://support.apple.com/kb/ts5185
If you have already tried these steps, you will want to utilize the information at the end of the article:
If you can't deactivate iMessage after you perform the steps above or you can't access the iPhone, please contact Apple Support.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

When I connect my iPod touch to your computer, itunes does not detect it ... but in My computer is detected as an external disk why?

when I connect my iPod touch to your computer, itunes does not detect it ... but in My computer is detected as an external disk why?

See:
iOS: Device not recognized in iTunes for Windows
IOt is normal and expected for the iPod to appear in My Computer

Organiser does not shoe clips DV date but filedate

Similar Messages

Maybe you are looking for