Organiser shows egg timer instead of thumbnails

I have asked this question before, within the last year and got answered.  Unfortunately I cannot find that answer now.  Please how can I get over
this problem.
Thanks in anticipation
Jim

THANK YOU THANK YOU
After 17 hours  on whirleybird gave up
I then did new test catolog
imported more photos
all working in minutes
Regards xchristin

Similar Messages

  • Why is PS 6 showing hourglass/egg timer rather than thumbnails in the organizer?

    I have uploaded some pictures using Photoshop Elements 6 and they usually show up as thumbnails.  They are showing as an hourglass/egg timer instead.  All previously uploaded pictures are still showing as thumbnails.  How do I correct this problem?  BTW - in the lower left hand corner of the organizer - it does not say "generating" thumbnails.  I have also tried right clicking the thumbnail, then update thumbnail, but this does not work.  I can, however, view the pictures is full screen mode.

    See this FAQ:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Recreate_Organizer_thumbna ils

  • Folders showing life time instead of last modified

    Hello,
    The business have a requirement to see various folders with their life time (valid to) date instead of last modified date. This is to help them delete the old document. Is there a way of doing this with least amount of coding, can the iview property be changed or is there an standard iview where properties can be changed to show life time etc. Does anyone know if these iviews are expored with their source code so that the source code can be modified? We are using EP5. Your help will be much appreciated.
    Many Thanks;
    SZ

    Hi SZ,
    you can configure what properties are showed for resources within the collection or the resource renderer. Check this out and around: http://help.sap.com/saphelp_ep50sp5/helpdata/en/50/041142e862654ca98ced1607386c9c/frameset.htm (especially "Visible Properties"). Take some time to understand the mechanisms...
    > We are using EP5
    Ah, <i>you</i> are the last one
    Hope it helps
    Detlev
    PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

  • ICal Invites show Standard Time instead of Daylight Time

    When sending event invites from iCal 4 with Exchange 2007 the event is created correctly but the email message is off by an hour and says Eastern Standard Time instead of Eastern Daylight Time.

    I have the same problem.
    I just imported my Palm Date Book calendar into iCal. The appointments in October show the correct time. Those in November are off by one hour. Here in Toronto, we go off Daylight time at the end of October.
    My question is, if I correct the appointments now, is iCal going to "correct" them again when the time change actually happens?
    I see there are lots of unanswered questions on Time Zone problems with iCal. Seems to be an issue with deep roots in the program.
    GB

  • Egg timer instead of photo in organizer

    at first when i installed elements 8 i could see a  photo image  then all of a sudden  it changed to a egg timer i cant see how to change it back
    If i click on it it will go to edit &   i can see But back in the organizer  i  get the egg timer again

    THANK YOU THANK YOU
    After 17 hours  on whirleybird gave up
    I then did new test catolog
    imported more photos
    all working in minutes
    Regards xchristin

  • Nokia 301 - SMS time shows receipt time instead of...

    Hi, I have just replaced an old trusty Nokia 100 with a 301.  Unlike my old phone, if I receive a new SMS on the 301, it shows the time the message was received by the phone, not the time it was sent.  So if I turn off my phone at night, and then back on in the morning, the messages received during the night all show the time the phone was turned on and messages were received.  I therefore have no idea what order the SMS's we sent in, and do not know if I need to respond.  Is it possible to set up the phone to show the time a received SMS was sent, not just the time it was received ? 

    Hello again, and thank you for the replies.  My phone software details are V 02.51   07-06-13  RM-840, which I believe is the latest version.  It is clearly a fault with the software.  I also have a Samsung Galaxy S3 mini phone for work and this had same problem - it shows the time received, not the time sent.  However, a third-party application is available to correct this problem.  It seems ironic that the more advanced mobile phones become, the less the manufacturers concentrate on the core functions for having a mobile phone.  I think that my only hope is that Nokia release an update to allow the sent date and time to be shown (having researched this, it seems that this information is sent with all text messages), or that some kind person make an app available. Looking at the message boards, other Nokia phones have similar problems, and it would make sense if Nokia would listen to their customers and resolve this issue, otherwise those persons affected will not buy Nokia phones again.    

  • OneKey Optimizer: Showing battery time instead of battery percentage

    So I just downloaded OneKey Optimizer for my Lenovo Z50-70 and there's a green battery icon on the lower right corner of my desktop. Sometimes it'll display the battery percentage, but most of the time it'll display the predicted amount of time the battery has left to sustain my laptop. How can I change the program so that it only displays percentage?

    I'm having the same problem too. My mom has a Yoga 2 13 and for some reason it did not come with OneKey Optimizer already on it. I downloaded it today from Lenovo's website and though some of the options on that app are on my computer but not on her app on hers, it works just fine. However, I can't seem to figure out how to change her battery icon from telling her the approximate time until the battery dies to showing the battery percentage, like it does on mine.
    Every time she plugs in the charger, though, the battery percentage displays itself on her battery icon, no doubt because it can't exactly tell how long it will take the battery to run out when it is plugged in, but when she unplugs the charger cord, it reverts back to showing how many hours and minutes it will last. This is very frustrating to her. I haven't been able to find answers to this question anywhere on the internet, so I hope someone will promptly repost a solution to this problem.

  • Workspace v1.8 - File Share shows actual time instead of expiration date

    Hi,
    our customer still uses Workspace Files Version 1.8 an in the main everything works fine. There is just one problem:
    When he creates a share for a file (not a folder) the expiration date for it should be shown - but in fact the actual time (when the share is created) is shown.
    Anyone seen this before? Is there a patch or any other possibility to resolve this?
    Thanks in advance!
    Marco

    I was having this exact same problem, then it just stopped. I am using the nouveau driver and I have a tnt2 card.
    IIRC, I was having an unrelated problem with xorg or udev or something was having problems detecting my monitor, it claimed I had two monitors connected, I wrote an xorg.conf file and that fixed the problem. IDK if its is related or not because I don't recall exactly when things started working when I would switch ttys.
    Try using the nouveau driver and see if it does the same thing, it has a kernel module so it might make difference,
    Last edited by RiceKills (2010-07-06 23:39:27)

  • PDF's showing Preview icon instead of thumbnail view

    Subject says it all. Not able to preview (page through) PDF docs. Pages files work fine, just not PDF. Any advice is welcomed.

    HI and Welcome to Apple Discussions...
    Try here for help. http://www.tech-recipes.com/rx/2241/osx_thumbnailpreview/
    Carolyn

  • PSE 11 Organiser wont display thumbnails only egg timer icons ?

    I have been using PSE 11 for about 6 months with no problems, however, yesterday the prog froze and I had to switch off and re-boot. Now all new uploads are displayed in the organiser as egg timer icons. These will open, but only one at a time when double clicked on. I am on Windows 7. I have uninstalled PSE 11 and re-installed but the problem persists. I have uploaded a very small jpeg and got the same resuilts, which seems to rule out a RAW problem. Any ideas ?

    Hi,
    Please try right clicking the thumbnails and choosing Update Thumbnail?
    If this doesn't help, please try refreshing thumbnail cache as explianed here-http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-catalog-issues-organizer-element s.html
    If none of this works, please follow the answer of the thread-http://forums.adobe.com/message/4734171
    Thanks
    Andaleeb

  • Icons instead of thumbnails showing in Bridge

    Hi,
    Why is it that in some of my directories icons for InDesign files show instead of the thumbnails of the job itself? If I open the files in InDesign and then re-save them, the thumbnails show up. And, in one directory in particular, I've got a lot of IDML files, because, I had to save ID files as that for a colleague who's got an earlier version of ID. Most all of them show up as icons, not thumbnails.
    Thanks,
    Peter

    In FileType Associations in Preferences, it lists InDesign with a series of extensions, followed by an ellipsis to indicate some others. But, I don't see IDML in there. You can't seem to be able to add to it. And, this problems shows up with some InDesign files as well, not just IDML files.
    Thanks,
    Peter

  • Can you change the volume display at bottom of screen to the song time instead?

    I have just bought a new Ipod Nano and really like it!  The only problem I'm having is when playing songs the bottom of the screen shows the volume level rather than how far it is through the song in time (like the old nanos used to show).  I find it really annoying not knowing at a quick glance how much more of a song is left to play.
    I know this info is displayed by double tapping the screen (although it is only shown temporarily).  Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
    Thanks in advance.

    Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
    There is not.  You can let Apple know how you feel about it using the form on this page.
    http://www.apple.com/feedback/ipodnano.html
    B-rock

  • Does PSE13 download photos in the order they are taken on that date and show actual time when hovering over the photo as it did in PSE6?

    In my work, I need to be able to look at photos I took throughout the day at various locations and group them by the time I was there on that date to distinguish the different properties I am taking photos of.  In my previous version of PSE6, when the day's pictures were downloaded, they were downloaded to the computer in the order I took them, and if you hovered over the picture it would show the time the photo was taken.  I just need a program that will organize in that fashion.  I do not need a lot of editing options, more the organizational options.

    Hi,
    If you are happy with PSE 6, why not continue to use it?
    PSE 13 can display the images in date/time order like PSE 6 does. The time doesn't appear when you hover over a thumbnail but can be displayed below the thumbnail. The best thing is for you to download the trial version (select version 13 from the following link) and try it for 30 days to see if you like it.
    Download Photoshop Elements products | 13, 12, 11, 10
    If you use the trial, to see the date and time under each thumbnail you need to go to the View menu in the organizer and ensure that Details is checked.
    Brian

  • Mavericks, only one site show question mark instead of images

    Hi,
         Updated to Mavericks, only one site show question mark instead of images. Tried safari, chrome and firefox all of them have same problem of showing images of this site. Tried reset, empty cachs, cookies, did not work. Any one have a clue to solve this? Thx.
    BTW, the site is: ssense.com

    Thanks! lol, seems silly now i had to post here when all i had to do was close and relaunch... sorry for wasting your time. thanks to those who answered.

  • Auto-index only shows 9 values instead of 91

    I'm pretty new to LabVIEW and am trying to show a cluster of 91 values pulled from a text file.  Just for a test run without using actual values passed, I created a text file with the numbers ranging from 1-91 (1 number per line up to 91).  When I let it auto index and try to unbundle it after transforming it from an array to a cluster, it only shows 9 values instead of 91.  Do you happen to know how I can overcome this issue?
    I have attached the basic files.
    Solved!
    Go to Solution.
    Attachments:
    For Loop Problem.vi ‏7 KB
    SMA.txt ‏1 KB

    STigmata08 wrote:
    Thank you very much, I had no idea that you could select a cluster size from the transformation.  I am converting it to a cluster because I thought that it would be the best form to insert the data into different parts of a word template.  I am trying to build an auto reporting tool for a test sequence.
    You need to set thee cluster size, because clusters are static structures and the size needs to be known at compile time. This also makes them useless for your problem.
    To extract all lines from a file, you could use Spreadsheed string to array with a 1D string array as type and linefeet as delimiter. No need for FOR loops and complicated code. Also your sequence structure has no purpose because execution order is fully determined by dataflow anyway. Why is it there? Don't clutter the diagram with useless constructs!
    Here's what you could do. You can get any element, array subsets, etc. using array tools. These are scalable and you don't need to know beforehand how many line are in the file.
    Here's a quick draft (LV8.6)... 
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    For Loop ProblemMOD.vi ‏8 KB
    ArrayNoCluster.PNG ‏9 KB

Maybe you are looking for