Organising the sequence of dictionaries in 'Dictionary Switcher' dropdown menu.

System info: Win XP SP3 (en-US locale), Firefox v16.0.1 (en-US version).
1: Why are some dictionaries in 'Extensions', and others in 'Dictionaries'? And which of the two is the way of future development?
2: Is there a way to organise the listing of dictionaries in the 'Dictionary Switcher' drop-down menu in A) alphabetical order, B) following the FF Languages option, or C) my own preference?
3: Ditto for the listing of locales in the 'Quick Locale Switcher' drop-down menu.
4: The dictionaries in the 'Dictionaries' section of add-on management do not show up in the 'Dictionary Switcher' drop-down menu. Is this a user-modifiable option, and if so, how?
5: Or should I be asking where to find the help files for various add-ons - other than asking the add-on authors? :-)
I can understand that questions 1 through 4 have interrelated answers.
Thanks,
Scott

Re 1&4: Thanks, the-edmeister.
Re 2&3: If disabling & re-enabling an add-on is the same as re-installing it, then the sequence of dictionaries does change when right-clicking in an input field. But not to either alphabetical order, my preferences, last-enabled on top or bottom of list, or to the ID as listed in the Troubleshooting info. Weird. I have not tried actually removing & re-installing a dictionary.
Re 5: I'll go check with the author of 'Quick Locale Switcher'. Methinks one could make writing help-files for add-ons a full-time job...
NEW 6: Every time I switch from Firefox to some different window, the language changes to en-US (probably because that's my system's locale). This I really do not like. I wish it stayed at its last setting.
If it HAS to change, then I wish it would have been to the top one in my Language preferences.
Whether I have 'Dictionary Switcher' enabled or not makes no difference.
This particular sub-question has been asked by others, but I haven't seen a solution that allows the selected input-language to remain selected.
I guess I myself would not need 'Dictionary Switcher' any more if 'Quick Locale Switcher' and/or FF itself A) did not change languages due to window-switching, B) had an 'auto-detect language while typing' option, and C) in its context pop-up displayed either the sequence as in the FF Selected Languages list or in strict alphabetical order (of the ISO-639 codes).
And I do realise the interplay between the language of interface, the content, and the input is a nightmare to set up cleanly - mostly due to average users not realising the difference between the various sections of a web-page..
Examples:
- Using multiple input languages (dictionaries) on a single website but the content in whatever the default is for THAT site, and the interface-language set to one's preference for ALL sites.
- A worse horror might be the use of multiple languages within a single input field...
Regards,
Scott

Similar Messages

Firefox spell-check dictionary switches to incorrect language when starting compose mail in Gmail

I have Firefox 11.0 with dictionaries for Lithuanian and Russian languages installed. It seems that no matter what dictionary language is selected, after I start composing mail in Gmail, it switches the dictionary language to Russian (it changes the spellchecker.dictionary property).
Steps to recreate:
1. Say, the dictionary language is set to Lithuanian in some way (the spellchecker.dictionary property is "lt")
2. Restart Firefox
3. Open Gmail page (spellchecker.dictionary is still "lt")
4. Start composing new mail - this is when the spellchecker.dictionary property gets changed to "ru"
(there are other, more complicated scenarios, when this happens, sometimes it is even enough to reload the Gmail tab)
Firefox general.useragent.locale property is "lt-LT", Gmail display language is "English-US". I don't know what other settings I should check. Of course, I could uninstall Russian altogether, but I do need it sometimes, so it would be nice to have, but not as a default language every time I open my mail.
I have found a similar bug https://bugzilla.mozilla.org/show_bug.cgi?id=717433 , maybe this is related.

There is no built-in way to use more than one dictionary at a time. The [https://addons.mozilla.org/en-US/firefox/addon/3414/ Dictionary Switcher] extension may be of use to you.

How to find out the Sequence settings of a created sequence?

I have had a problem come up a few times where I am switching back and forth from one format to another, I frequently work on multiple edits, and my sound goes out of sync. This is usually because the sequence is set wrong (from when I switch and forget to change it back) and when exported it compresses the audio wrong. How do you find out what the settings are for a sequence you are working on when it's open in the FCP timeline? I'm looking for a quick way to rule out the sequence as part of the audio sync problem.
Thanks,
-Bluecast

Or Command-0. What about Easy Setups? I use them routinely so that I don't have to think about setups. Once the setup is saved and properly used, all the settings for sequences and hardware are easily made for you.

Get the Table name by providing the Sequence name

Hello,
I wish to retrieve the table name to which the sequence is related.
I understand that when the sequence was created, no reference is mentioned to any table. The sequence may be used across many tables.
But the DB definitely knows internally how many tables are referencing the particular sequence.
So, can anyone help me in finding the table (or all tables) referencing one particular sequence.
Thanks and Regards
(Please treat this as urgent as i am desperately in need of such a query)

I share Adrian's scepticism. Using the data dictionary we could find all the program units - TRIGGERS, TYPES, PROCEDURES, etc - which use the sequence. From there we can find all the TABLES that are also referenced by those programs. And that's as good as it gets in Oracle. We cannot definitely say which tables use which sequences (although a good naming convention helps).
Of course, your DBA may have access to some accurate and up-to-date documentation. But that is maintained externally to the database and not derived from it.
Cheers, APC

Find the SEQUENCE created by an IDENTITY column

Hello,
Seems that Oracle 12c introduces IDENTITY columns based on SEQUENCES that are created automatically...
The sequence gets a name like ISEQ$$_<number>
I was wondering if it's possible to find the name of the sequence created for a given table.
We need that to query the last generated number, by doing:
select <seqname>.currval from dual
Or is there another way to find the last generated number for the current SQL session???
Thanks!
Seb
SQL> create table t1 ( key integer generated by default as identity, c char(10) );
Table created.
SQL> select sequence_name from all_sequences where sequence_name like 'ISEQ%';
SEQUENCE_NAME
ISEQ$$_93989
ISEQ$$_93991
ISEQ$$_93993
ISEQ$$_93995
ISEQ$$_93997
ISEQ$$_94107
6 rows selected.

AlbertoFaenza wrote:
The sequence used can be found in the DATA_DEFAULT column of ALL_TAB_COLUMNS where IDENTITY_COLUMN = YES.
Yes, this is simplest way. But just FYI, 12C has a new data dictionary table SYS.IDNSEQ$ which ties identity column to a sequence. I'll use same table t1 as in this post:
SQL> select data_default
2    from user_tab_columns
3    where table_name = 'T1'
4      and column_name = 'KEY'
5 /
DATA_DEFAULT
"SCOTT"."ISEQ$$_91684".nextval
SQL> select s.object_name sequence_name
2    from user_objects s,
3          user_objects o,
4          user_tab_columns c,
5          sys.idnseq$ i
6    where o.object_name = 'T1'
7      and c.table_name = o.object_name
8      and c.column_name = 'KEY'
9      and i.obj# = o.object_id
10      and i.intcol# = c.column_id
11      and s.object_id = i.seqobj#
12 /
SEQUENCE_NAME
ISEQ$$_91684
SQL>
SY.

Show popup dialog at step type dropping to the sequence

I have a LabVIEW step type with some module parameters and step's variables what needs to be setup to configure this step. Can I make it to display the popup dialog to enter the required values at the moment when I drop the step type to a new sequence?
Examples: 1. I have TestID in steps variables what needs to be setup. Popup dialog is more convenient than going to Variables and searching for the TestID in tree.
2. I have one step type which does a different actions depending of the enum parameter in the LabVIEW module. This parameter is set to default in steptype. I'd like the step name in my sequence to be the value of the enum. Something like RunState.Step.TS.SData.ViCall.Parms["Configuration Update"].ArgVal in the step type Default Step Name Expression helps and displays the enum text as step name when I drop the step type in the sequence. But changing the Configuration Update parameter in this step to another value does not followed by changing the step's name, looks like the step type's Default Step Name Expression is evaluated only once when step is created from the step type.
Sergey Kolbunov
CLA, CTD
Solved!
Go to Solution.

Thank you Doug, your advise works just perfect for the first case. OnNewStep, who may think about it? Is it documented somewhere?
For the second case it is not so straightforward. I don't care so much about automatic update of the step name when it is already in a sequence, setting this name and the appropriate module's parameter at insert will be enough. Tool to update names is not a problem, I'm using such kind of tool to automatically update sequences when my step types got changed. I need the subject feature because I'm trying to create a custom sequence editor for end users with minimal knowledge of TestStand.
Talking about second case, it's look like setting of module's parameter via expression does not work. Now I'm trying to set it using TestStand API in the OnNewStep substep.
Now I have another problem. How to access the TestStand Adapter API automation server in LabVIEW? I'm trying to get Sequence Context ->Step ->Module ->Parameters but to get Parameters property of LabVIEWModule class the TestStand Adapter API server required while I see properties list for the Module class of the TestStand API server. It seems to be very easy to switch server in TestStand but how to do it in LabVIEW?
Sergey Kolbunov
CLA, CTD

Please Explain the sequencer ( J2EE Code )

Hi,
The following code is a part of Dao, I could understand the flow of the Dao classes but I really could not make out why this sequencer program is used.
Please explain and send any URL which will help.
Comments Plz.
package lrnsource.src.com.lrn.dao.common;
import java.sql.Connection;
import java.sql.SQLException;
* The Sequencer class represents the oracle
* implementation of Sequencer.
public interface Sequencer {
     * Gets the next number in sequence for the given entity.
     * @param entity the given entity.
     * @param con the connection object.
     * @return Returns the next number in sequence.
     * @exception throws SQLException when some problem with DB.
     public long getNextSequenceNumber(String entityName, Connection con) throws SQLException;
     * Gets the current number in sequence for the given entity.
     * @param entity the given entity.
     * @param con the connection object.
     * @return Returns the current number in sequence.
     * @exception throws SQLException when some problem with DB.
     public long getCurrentSequenceNumber(String entityName, Connection con) throws SQLException;
package lrnsource.src.com.lrn.dao.common;
import com.lrn.common.CommonConstants;
* This class provides instance of sequencer
public class SequencerFactory {
     * Public method which gets the runtime implementation class
     * for implementing the sequence generation related functions
     * @Param          seqType the sequencer type.
     * @return Sequencer interface, the type of implementation class.
     public static Sequencer getSequencer(int seqType){
          Sequencer sequencer = null;
          switch (seqType) {
               case CommonConstants.ORACLE_SEQUENCER:
                    sequencer = new GemsOracleSequencer();
          return sequencer;
package lrnsource.src.com.lrn.common;
* This class contains the constants used across lrn.
* <p>
public class CommonConstants {
     public static final int ORACLE_PERSISTENCE                    = 1;
     public static final int ORACLE_SEQUENCER                    = 1;
     public static final String DATASOURCE_JNDI                    = "java:/comp/env/jdbc/GemsDB";
     public static final String ERROR_MESSAGES                    = "";
     public static final String CERTIFICATION_SERVICE          = "java:/comp/env/ejb/certification";
     public static final String QUESTION_SERVICE                    = "java:/comp/env/ejb/question";
     public static final String REGISTRY_SERVICE                    = "java:/comp/env/ejb/registry";
     public static final String ADMIN_USER                         = "ADMIN";
}

dear friend,
please look here:
http://help.sap.com/saphelp_47x200/helpdata/EN/c1/416a55de2a11d3b4ff006094b9b9dd/frameset.htm
regards,

How to load the sequence file from the process model?

Does anyone have an example process model that loads a sequence file? The out-of-the-box process models assume the sequence file is already loaded. I want the process model to identify the UUT type and load the appropriate sequence file based on that.

Mark,
A better solution to your question can be accomplised if you have TestStand 2.0.
Within the entry point of a process modle you can set the client sequence using Execution.ClientFile(). This is a new method of TestStand 2.0. It was specifically designed so that you could dynamically set the client sequence within the process model.
Currently the entry points in the default process models (i.e. Test UUTs and Single Pass) are configured to Show Entry Point When Client File Window is Active. This means that you must open and have active a client sequence file before you can execute one of the entry point. You probably do not want this implementation if you are going to set the client file during the entry point execution. To change this you will need to go the sequence properties of your entry point (while the sequence is open select Edit>>Sequence Properties), switch to the Model tab of the entry point's property dialog box, and enable Show Entry Point For All Windows. The entry point will then appear whether or not you have an open sequence file active.
You will need to add at least 3 steps to your entry point sequence that all use the ActiveX Automation Adapter. Remember that MUST disable Record Results for any step you add to the process model. The 3 steps will perform the following tasks:
1) Obtains a sequence file reference of the file that you want to be the client sequence file. You will need to use the Engine.GetSequenceFileEx method. You will need a local variable (ActiveX data type) in which to store the sequence file reference.
2) Set the client sequence file using the Execution.ClientFile property.
3) Close the reference to the client sequence file in the Cleanup step group of your entry point sequence using Engine.ReleaseSequenceFileEx
I am attaching a SequenceModel.seq file (the default process model in TestStand 2.0) in which we have modified the TestUUTs entry point as described above.
Note that you'll be prompted to enter the path to your client sequence file. This is a message popup that you can delete and it was added for your review only.
Good luck in your project,
Azucena Perez
National Instruments
Attachments:
sequentialmodel.seq ‏164 KB

When spellchecking table, dictionary switches to Spanish for no reason

I am spellchecking an InDesign 4 document. On page 9 of an 80 page document, in the middle row of a chart, the selected Dictionary switches to Spanish and begins questioning every word in the document because the document is in English.
Any ideas,
All the best,
Rip My Hair Out

In the Control Panel or the Character Panel, check the Language field for the text that causes the switch.
You can do a global find change by Language if you leave the Find what and Change to fields blank, click on More Options, and change the formatting in both fields. Select the language in the Advanced Character Formats pane.

Does Pool & Cluster tables has the same structure in both Dictionary and Db

------------ Exists with the same structure both in dictionary as well as in database exactly with the same data and fields
a. Pool Table
b. Cluster Table
c. Transparent Table
d. All the above
To my knowledge, I know transparent table has the same structure in both Dictionary and database.
Can anyone tel me the answer for the above question.. whether it is
c. Transparent table
or
d. All the above

Transparent Table:
A physical table definition in the database for the table definition which is stored in the ABAP Dictionary for transparent tables when the
table is activated. The table definition is translated from the ABAP Dictionary to a definition of the particular database.
A transparent table in the dictionary has one to one relationship with a table in the database.
For each transparent table in the data dictionary there is one associated table in the database.The database table has the same name, the same number of fields and fields have same names as the transparent table definition. Transparent tables are used to hold application data. Application data is master data or transaction data used by an application.
e.g. master data - table of customers
Transaction data - order placed by the customers.
Pooled tables:
Pooled tables can be used to store control data (e.g. screen sequences,program parameters or temporary data). Several pooled tables can be
combined to form a table pool. The table pool corresponds to a physical table on the database in which all the records of the allocated pooledtables are stored.
Pooled table in R/3 has a many to one relationship with a table in the database. For one table in the database there are many tables in the R/3 data dictionary.R/3 uses pooled tables to hold large number of very small tables. You might create a table pool if yoou need to create hundreds of small tables that each hold only a few rows of data.
Cluster tables :
Cluster tables contain continuous text, for example, documentation.Several cluster tables can be combined to form a table cluster. Severallogical lines of different tables are combined to form a physical record in this table type. This permits object-by-object storage or
object-by-object access. In order to combine tables in clusters, atleast parts of the keys must agree. Several cluster tables are stored in
one corresponding table on the database.
A cluster table is similar to pool table . It has many to one relationship with the table in the database.
They are used to hold the data from a few(approximatelly 2 to 10) very large tables. They would be used when these tables have a part of their primary keys in common and if data in these tables are all accessed simultaneously.A cluster is advantageous in the case where data is accessed from multiple tables simultaneously and those tables have at least one of their primary key fields in common.Cluster table reduce number of database reads and thereby improves performance.

Is there a way to create a renaming preset where the sequence starts at the number "0" zero?

What I am trying to achieve is the following:
Fro example, I am photographing a handbag and I need to rename the file using a barcode and a barcode scanner.
My sequence of images goes like this:
Image 1: Tag shot
Image 2: Front
Image 3: Back
Image 4: Inside bag
Let's say the barcode once scanned produces a code such as TRE8801AZT16-Z
Right now my current preset is "Custom Text_Image # (1)"
This results with the images being renamed as:
TagShot: TRE8801AST16-Z_1
Front: TRE8801AST16-Z_2
Back: TRE8801AST16-Z_3
Inside bag: TRE8801AST16-Z_4
What I need is the sequence to start at zero so the tag shot is _0 and my images are named like this:
TagShot: TRE8801AST16-Z_0
Front: TRE8801AST16-Z_1
Back: TRE8801AST16-Z_2
Inside bag: TRE8801AST16-Z_3
Is this possible? If yes, how?
Thanks for the help
Cody

About as close as you can get is to right-click on a single clip and Make Multiclip Sequence. Hit OK to make an sequence out of the single clip. Open the sequence made and delete the multiclip and edit the clip you want back into the sequence.

I can not play the sequence in preview mode. How do I fix this issue?

Each frame loads in the preview window when highlighted, but I can not play the sequence.

I am working on a project for school. I have been draging clips down to the timeline and matching it with a few voice overs. Nothing too complex. I have been previewing my work as I go by pressing the space bar, Im not sure what I did but now Premiere will not play the preview in the Program sequence window.

I have the iPhone 4. I recently switched from PC to IMac. I am trying to sync my iPhone, but iTunes will not let me add or remove anything. Do I need to change a setting since I changed computers? Help!

I have the iPhone 4. I recently switched from PC to IMac. I am trying to sync my iPhone, but iTunes will not let me add or remove anything. Do I need to change a setting since I changed computers? I try to add songs from my music into my phone section and it will not go... Plus the playlists on my phone are not updated on my iTunes phone on my computer. Its like it never updated. What am I doing wrong??

Iphone will sync with one computer at a time.
When you sync to another it will delete the current content.
Make sure you have copied everything from your old computer to your new one first.

Sequence header at the end of the sequence in the report

Good afternoon everyone,
I have a strange issue with my TestStand Report (any kind of report type) : some time ago the headers (with the name, the parameter's values, the module time, the status) of the sequence and sub-sequence were at the begining. Now they are a the end of the sequence, which means instead of having the status of the sequence first, I have the status of all the steps contained in the sequence BEFORE having the status of the sequence.
I have checked and double checked the Report options : nothing tells that the headers must be at the end.
I have 2 bench on which my sequences are running and one of them has the sequence headers upside down in the report and the other has the headers in the proper order. Their report options are exactly the same and I can't find where the configuration is different !
Does anyone have some idea ? Please ?
TestStand revision : 2010

To Norbert :
The steps in the body are ok, in the correct order yes.
I've attached two extract of report (check the Report Correct first), change the extention from ".txt" to ".html", the html one wasn't authorized by the forum.
To jiggawax
I'm not using XML format, only text or html. Where is located the ReportOptions.ini file ? I cannot find it with a basic search, could it be hidden ? As I am not managing this file in the configuration of the benches, it might be the origin of the problem !
Both benches are running the same client sequence indeed : the client sequence are located on a network reachable by the benches.
I doubt that one the client sequence can override a report callback but afterall I should make sure of this possibility.
Thanks for your help !
Attachments:
Report Correct.txt ‏12 KB
Report Upside down.txt ‏15 KB

How to open a message popup and keep the sequence running ?

I have some steps in my sequence to initialize communication ports that takes a few seconds. As i have the trace off i want to display a message popup to tell the user that the sequence is doing the init. After the init steps are done i want to close the popup out of the sequence without pressing any button.
Is there a possibility in TestStand to do this ?
The normal Message popup stays until a key is pressed and even pauses the sequence while active.
Thank for help.

You could call your message popup in a subsequence as new execution and terminate this execution programmatically after your init steps have finished.
In order to do this you have to specify (module) the sequence call step that calls your subsequence:
-Multithreading and Remote Execution = Run in a New Execution
-Settings: Initally Hidden and Tracing disable, Restartable, Close Window when done, Wait for Execution to complete: Do not wait, Process Model Option: Do not use a Process Model
-Store an Object Reference to the New Execution in: e.g. Locals.ExecutionRef
After your Init steps you insert a ActvieX/COM Action Step that terminates the new execution:
-Object Reference: Locals.ExecutionRef
-Automation Server: NI TestStand API 3.1
-Object Class: Execution
-Call Method or Access Property: Call Method
-Method: Terminate
This will terminate your new execution showing the message popup.

Organising the sequence of dictionaries in 'Dictionary Switcher' dropdown menu.

Similar Messages

Maybe you are looking for