Organizational assignment created via organizational Management

Hi All,
I am getting error message while deleting entry from IT 0001 - Organizational Assignment.
I have run the promotion action from 01.05.2010 and record in IT 0001 exists from 02.11.2010 which need to be deleted but am getting this error message.
Kindly advise the procedure to delete the record.
Regards,
Devendra.

Dear Devendra,
Please go to PA41 for change of actions.
if not possible thru
PA40 enter your date , select the same action again and execute it.. then you can get a buttons on the left top the screen....
change action & Change info group.
Clik on change action,, here it allows you to change the action date and....thru this you can change the date of org. assignment change also.
it help you out
try it.
thanking you,
Srinivas

Similar Messages

Error: Organizational Assignment created via Orgnizational Management in HCM form

Hi All,
I am getting below error while moving an EE to certain position via HCM form.
I have cheked and found that if an org unit is to be assigned to another cost center in Organizational management from a certain date, this action generates a new record in infotype 0001 for integrated persons from the date of assignment to the new cost center and if we perform any action which would be deleting the new record (created from OM) in IT0001 then this error would populate.
Here is the the same case a new Cost Centre has been assigned with the orgunit and a new record is creaed in IT0001 from the OM but when I am performing the same action via PA40 then I not getting any error, the error is occuring from the form only.
Can you please help me to resove this error and provide me the reason why it is not occring when I am performing the same action from PA40.
Regards,
Mayank

Hi Mayank,
I think you will be triggering Job Salary Form for the action you have mentioned. Please check in the Tcode HRASR_DT for the form name as I have show below from my development system. In Back-End services - SAP_PA - Infotypes and Operations and for Infotype 0001 check what is the operation that you have maintained.. It should be "change" to avoid the error message.
For PA40 action you would have configured the same as "change" thats why you are not getting error message in PA40.
Thanks,
Sriram

Authorization and moving employes to another organizational assignment

Hello! I have a big problem with authorization.
Lately some employes have been moved from one organizational assignment to another organizational assignment.
After moving I prepared the user and the role for this user he will be able to read infotype records for employes in the organizational assignment where they were moved.
And now I have big problem because this user can read data of employes in current organizational assignment and also data of these people in old organizational assignment, thought I didn't give him authorization for this old organizational assignment.
I checked view of table V_T582A and there in infotype 0001, 0007, 0008 in detailes the field: Access auth was checked, so I executed tests and this field was unchecked. But this test wasn't successfule.
In table T77S0 I have the following settings for AUTSW:
AUTSW     ADAYS            15
AUTSW     APPRO     0
AUTSW     NNNNN     0
AUTSW     ORGIN     1
AUTSW     ORGPD     0
AUTSW     ORGXX     0
AUTSW     PERNR     1
AUTSW     VACAU
I changed them but the tests also weren't successfule.
Please, help me, where the error can be?. Now I don't know
where I can look for the solving of this problem.
I my company we have the system:
46C
SAPKE46CB0
the latest note: LCP CE 74
Thank you very much if anyone helps me.

Hello Marta,
yes, the behaviour is corret. The old one can not see the new data but the new one the old. It's like a personal file where the new manager has access to and the old only knows what was entered up to the end of his responsibility.
This litle "picture" always helps me.
Please go to:
http://service.sap.com/erp-hcm
On the left side click:
Services for mySAP ERP HCM
- Special Documentation
In the document "Authorizations in mySAP HR (4.6C)" from page 70 chapter "4.4 Process of Time Logic" describes the behaviour in detail.
Hope to help,
Michael

Mass Assignment of sales organization to products

Hello experts,
I'd like to ask if anyone knows an easy way to maintain, mass update all products or products of a category with tha sales data?????
A trans. or report or smth, to assign the sales area XXX to all the products of the category YYYY.
Thank you in advance
Michalis Tamiolakis

Hi,
here's the menu path in IMG: Enterprise Structure -> Definition -> Sales and Distribution -> Define... sales organization
But please note: this is definitely an optional task, it's only for statistical purposes. For reporting purposes you should still be able to get all your analyses based on the organizational assignments of the sites (site master) and also in the business documents (e.g. in purchase order header data) Anyhow, there's one restriction: if you do this, then the purchasing organization in question has to be assigned as standard purchasing organization to those sites, that have the sales organization assigned (further purchasing organizations could still be assigned then).
From a business process point of view the sales organization - purchasing organization assignment is of no relevance.
There might be one aspect related to Retail Pricing: if you forgot to assign a reference site for pricing (you should do this though! - Logistics General -> Retail Pricing -> Sales Price Calculation -> Assign Pricing Type/Reference Site to Organizational Level), the system could use that purchasing organization for supply source determination.

Assignment of sales organization to purchasing organization

Hi experts,
I saw one diagram that shows a sales organization can be assigned to purchasing organization. Can you please tell me how to assign this? Here's the statement from a book.
In SAP Retail, a sales organization can be assigned to a purchasing organization. This
means that the hierarchy creation that is displayed in the figure may be enforced. For
statistical purposes, this may be of interest. In some cases, both terms are identical.
Thanks for the help
Edited by: Dwi Soetedjo on Mar 8, 2010 10:00 AM

Hi,
here's the menu path in IMG: Enterprise Structure -> Definition -> Sales and Distribution -> Define... sales organization
But please note: this is definitely an optional task, it's only for statistical purposes. For reporting purposes you should still be able to get all your analyses based on the organizational assignments of the sites (site master) and also in the business documents (e.g. in purchase order header data) Anyhow, there's one restriction: if you do this, then the purchasing organization in question has to be assigned as standard purchasing organization to those sites, that have the sales organization assigned (further purchasing organizations could still be assigned then).
From a business process point of view the sales organization - purchasing organization assignment is of no relevance.
There might be one aspect related to Retail Pricing: if you forgot to assign a reference site for pricing (you should do this though! - Logistics General -> Retail Pricing -> Sales Price Calculation -> Assign Pricing Type/Reference Site to Organizational Level), the system could use that purchasing organization for supply source determination.

Problem to assign BP in organization model

Hi sap
I have configured the service desk in solution manager.
I create my organization model from transaction ppoma_crm.
Now I think that I must assign business partner to organization units (first level support, second level support ..) but I can't do it.
Anyone know can please tell me if exist a document that show step by step procedure to create a oranization model, assign business partners and cretate automatic assigment of message?
thanks in advance
best regards

Hi Giovanni,
have a look at /people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Regards

Authorization required for creating new Organizational units

Hi all,
How can we give authorization required for creating new Organizational units (IMG CRM Master Data Organizational Management Organizational Model Create Organizational Model) to a particular user?
Thanks and Regards,
Archana

the basis guy should be able to help.
at a higher level: you need to set authorizations to the roles assigned, the transaction code is pfcg.
you may create a new role with the required authorization and assign to the relevant users.
hope it helps..
regards
RH

Authorization required for creating new Organizational units in CRM

Hi all,
How can we give authorization required for creating new Organizational units (IMG CRM Master Data Organizational Management Organizational Model Create Organizational Model) to a particular user?
Thanks and Regards,
Archana

Hi archana,
U can Create a role through Transaction PFCG.
Just create a role and assign the tcode PPOCA_CRM if u want to give the user just only this authorization otherwise u can select the menu list from sap menu and assign this role to that user.
Another way is if that user already exist in that system then just assign that particular transaction codr with that user.
Hope it will help u
Regards
Subhash

Authorization via Organization

Hi HR Gurus,
Do you have any idea how could I restrict authorization for Controlling object through organizational assignment of employees?
Actually the problem is that I have several Cost Centers and I need to restrict the access of planning and reporting these Cost Centers to the person who is repsonsible for the given Cost Center (e.g. the manager of the unit). My only idea currently is to create as many profile as many Cost Center I have but I beleive it is a stone-age solution and I hope to have a more flexible and proper solution.
Thanks in advance!

hi,
if you want to restrict, you can do it accordinvg to personal area level where org units should respect to personal area..
Reward me if helps.
Thanks,
Vasu.

Creating an organization structure

Good Morning;
If we are not using Service Desk, is there any benefit to creating an organization structure in Solution Manager?
If so, would someone be so kind to point me in the direcction of documentation.
Regards
Don

Hello,
The org structure becomes useful when one uses automatic team determination in service desk. When a Service desk has many teams (e.g. FI, BC, SD, MM...). When a message arrives rules (TCD PFAC) are used to determine which team should be assign to a message. Usually the rules is based on the SAP component. This help speed up the processing time a message. But, if you are not using service desk. I see no need for it.
I have not seen any good documentation on this. There is the old 3.1 additional information document from http://service.sap.com/solutionmanager Then Media Library --> Technical Papers and the document name is "Service Desk: Additional Information"
It is helpful if one is a CRM functional consultant. If you are looking for good general documentation on solution manager, it does not yet exist. Currently one must go through the IMG (SPRO), SAP help (which is very general), this forum (helpful but usually too brief for beginners), There are SAP Press books, but I also found they have big gaps in most areas. The SAP Press books do state they do not replace the installation or implantation guide. Hence one ends up jumping from documentation to IMG to forum. It is a slow a painful process.
Regards,
Avrohom Weissman

Help - Item Assignment at Inventory Organization level from the Interface

Hi,
I have developed an Inventory Item upload Interface (MTL_SYSTEM_ITEMS_INTERFACE Table) for Oracle Apps R12.
It works fine in uploading the Items to Master Org which the template is created. But When I tried to upload at Inventory Organization level it returns an error says 'Template or Template ID is not assigned for the Organization'.
How can I assign/upload the Item at Inventory Organization Level? I have already tried the Organization Item Assignment Report, It works fine and assign the Items to relevant Organizations. But the parameters are Item Range which I cant use those parameters.
Please help me to Upload items at Inventory Organization level from the Interface.
Thanks

open any delivery.
1. select any delivery item number( double click).
2. go to text tabstrip of the item.
3. select the text type and double click on the blank space where we write some texts will give you new screen for writing text will give you text screen.
then in menu: goto->header will popup screen with details given below.
text name: delv+item num
Language: 'EN'
text ID: '0001'       " for first text type and so on.
Text Object: 'VBBK'
****CODE.
data: ist_text type table of tline,
      wa_text type tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
   CLIENT                        = SY-MANDT
    id                            = 'textid'
    language                      = sy-langu
    name                          = 'textname'   " its concatenation of Dlv no. and item number.
    object                        = 'VBBP'
tables
    lines                         = ist_text
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward points if helpful.
Regards
Ashok

How use jndi to create a organization and add a user to it.(ÈçºÎ´´½¨Ò»¸ö×éÖ¯µ¥Î»)

how use jndi to create a organization and add a user to it¡£THANKS£¡
ÈçºÎ´´½¨Ò»¸ö×éÖ¯µ¥Î»,²¢½«Ò»¸öÓÃ»§Ìí¼Ó½øËü¡£Ð»Ð»£¡

Hi,
The command above about creating a group only works for the root site of the site collection, because the scope of the user group is site collection level, these groups
can be used in all the sites in this site collection.
With the existing groups in the root site, we can add users into them and grant specific permissions of a specific sub site to these groups.
Here is a demo about how to assign permission to a group using Client Object Model(though in C#) for your reference:
http://www.c-sharpcorner.com/UploadFile/54db21/set-permission-to-group-in-sharepoint-2010-programmatically/
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Organization Hierarchy related setup for Item Organization Assignment prog

Hi,
Could someone please help us with this..we have a Master org M1 , a child org C1 already existing and has items already assigned to it.
Now we have created a new org :C2 with the Master org still as M1. Now we want to assign all the items currently assigned to C1 to this newly created org C2.
Hierarchy Definition :
1. In the Organization C1 (after changing org) we give the name to a new Hierarchy : Test Hierarchy, set the version as 1, with the start date against it.
Then in the Organization block search for the NAME field as C1 org name..this comes as well.
Then in the Sub Ordinates section , we enter the name as C2 (This is the org to which we need to assign all the items currently assigned to C1 org)
Then we save this Test Hierarchy definition.
Item Organization Assignment program
2. Running the Item Organization Assignment program : Here we change the org to C1 first (source org), then sub mit the program . Parameters :
Source org : C1 org name
Hierarchy Origin : C1 org name (since this is my starting org or the sourcing org from where i need to assign my items)
Hierarchy : Now here the issue is happening as we are not getting the Test Hierarchy which we have created above in the options to choose from...
Since we had created the Test Hierarchy in the C1 org , we should have got this hierarchy name to show up in this parameter..
Could someone please help as to what could be the issue...we are stuck because of this.
Thanks

Sir,
For this program the two value sets used are
INV_ITEMASSIGN_HIER_ORIGIN (this is C1 for u)
INV_ITEMASSIGN_HIER_WITH_SRC (this is not showing the expected value) this is dependent value sent and is checking that INV_ORGHIERARCHY_PVT is contained in the previous value set.
Can you please confirm that the responsibility from which you are running the request has the C2 organization access?
Thanks
Karthik.

Assignment of Purchase Organization with Company Code and Plant

Please give me solution to Assign Purchase Organization with Company Code and Plant. While creating a material in organization level plant and purchase organization should be assigned.
Please help me out.
Thanks

Hi,
I am not sure if i have really understood your query.
Material creation means creating master data, as far as creation and assignment of organization elements with other organizational elements are concern for eg : purchase org in you case is part of standard configuration.
You create Purchase org using t-code OX08 here you copy from and existing one and then chane the description of Pur org as per your requirement.
You assign Purchase Org using t-code OX01 to company code assignment, t- codeOX17 for plant assignment to Purchase Org.
Normally you do all your changes in Devlopment server save the changes in an transport request then move it to quality and production enviornment.
Hope this helps.
BR

Using Effective Dates on Organization Assignment on Contract Posting Terms

We are using ECC 5 and RE-FX
On our contracts the Posting Data Tab includes Term groups
-Postings
-Frequency
-Organizational Assignment
The Business Area associated with an Organizational Assignment needs to change (we are dropping an existing business area and rolling it into another).
Rather then going through all the contracts and changing teh business area to the new one (thus loosing history), I'd like to use the Valid From/To for the Org Assignment. So that there would be an entry from 01/01/2006 - 09/30/09 for Business Area 5600 and then a Valid From of 10/1/09 for Business area 5200.
I can do this. What seems to be missing, or not configured?, is having the multiple valid Org Assingments showing up in some reports (such as REISCN which shows only the first Org Assignment entry).
What can we do to implement the Org Assignment in such as was as to accommodate the change of business area, that does happen over the life of a business?
Thanks for your advice and suggestions!
Laurie McGinley

Then my cardinality is drastically reduced to 92K (actual 110M) - leading to Nested Loops further up the query plan....
I don't have histograms on the columns involvedIf you add histograms on the involved columns, is the optimizer picking up a better execution plan?
Also note that the problem might be that you need a combined value distribution on two columns. This is possible from 11g onwards, but not before. Check out http://www.oracle.com/technology/pub/articles/oracle-database-11g-top-features/11g-manage.html (Search for Multi-Column Statistics)

Organizational assignment created via organizational Management

Similar Messages

Maybe you are looking for