Organizational Management configuration Guide.
Hi All,
Can any body please give me the configuration Stpes for Organization Management.
The tables included in the configuration.
I have gone through this site
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/dfba3692dc635ce10000009b38f839/frameset.htm
But i need whole configuration guide for OM.
Please help me.
Thanks,
Hi,
In OM you have to configure the following
IMGPersonnel management Organizational management Basic settings Maintain number ranges set up number assignment for all plan versions
Maintain object type:
IMGPersonnel management Organizational management Basic settings Data model enhancement maintain object type
Maintain infotypes
IMGPersonnel management Organizational management Basic settings Data model enhancementu2014infotype maintenance maintain infotypes
Relationaship maintenance:
IMGPersonnel management Organisational management Basic settings Data model enhancement Relationship maintenance maintain relationships
Maintain evaluation paths:
IMGPersonnel management Organisational management Basic settings Maintain evaluation paths
Maintain personnel actions:
IMGPersonnel management Organisational management Basic settings Maintain personnel actions
Activate inheritance of account assignment features
IMGPersonnel management Organisational management Basic settings Activate inheritance of account assignment features
Setup integration with Personnel Administration
IMGPersonnel management Organisational management Basic settings Integration Setup integration with PA
Transfer data from Pa
IMGPersonnel management Organisational management Basic settings integration transfer data from PA
Perepare integration with Pa
MGPersonnel management Organisational management Basic settings integration Prepare integration with PA
Transfer data to PA
IMGPersonnel management Organisational management Basic settings integration Transfer data to PA
Check integration consistency
IMGPersonnel management Organisational management Basic settings integration Check integration consistency
regards,
kalyani
Similar Messages
-
Fund Management-Configuration guide step by step
< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Dear Sap gurus,
Please send Fund management configuration guide step by step.
Its very urgent.
Thanks in Advance,
SreeHi
Funds management :
Funds Management allows management to set budgets for revenues and expenses within your company as well as track these to the area of responsibility.
http://ot.bloomu.edu/Documents/SAP/Word%20Docs/New/SAPReportsJan2006.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIFM/FIFM.pdf
nagesh -
Treasury Management Configuration Guide
Dear All,
Can anyone provide the Configuration Guide of Treasury & Risk Management Module ?
It will be really helpfull to me to understand this module complexity.
My mail Id is hitesh1486#gmail.com.HI,
You can find the tutor/pdf's at
https://websmp208.sap-ag.de/solutionmanager - > Knowledge Exchange ->SAP Solution Manager ->SAP Solution Manager 7.0 - EHP1 ->Operations with SAP Solution Manager
(eg:- https://websmp208.sap-ag.de/~sapidb/011000358700000525352007E.sim)
also some guides from
https://websmp208.sap-ag.de/Solutionmanager -> Media Library
Regards,
Sam -
Sap Collections Management Configuration Guide 6.0
Hi All
I have started to install SAP Collections Management from FSCM. I have seen references to a pdf document configuration guide version 6.0 but cannot seem to locate the document on SAP. Does anyone have this document or know where it is available?
Regards
SimonHi Simon,
Just simply check SMP > FSCM-COL > media library > 'other tab' as blow;
or I can share it if you share private email.
All the best
Ted. -
Reg.Batch management configuration guide
Dear Experts
We want to maintain batch at material level. How to configure in ECC6.00. Pls help me giving the step by step configuration guide. and also AFS configuration guide.
Thanks
Rajakumar.KHi,
Follow the steps:
1.Field---VFDAT and table-MCHA should be created as a charecter in CT04 and assigned to a class in CL02N.
2.create MM01 and add the class to it in classification view.
3.In mm01 plt storage1 view give data for remainning shelf life and total shelf life and in purchasing view activate batch management.
4.OMJ5- activate SLED for your plant and mvt type 201.
5.opj2- set BD for your plant.
6.create sort sequence in cu70 and assign your charecteristic value to it.
7.create batch serch strategy in MBC1 for access sequence(plt/matrl/mvt typ) create a condition record.
8.Do a GR using 501 and enter SLED related details.(production date and exp date values)
Repeat the above step and enter diffrent values for SLED details.
So now two batches are created with SLED as the charecteristic.
9.Do a GI using 201 mvt tye in MB1A and enter * in batch field(system will determine the batch using the SLED value basedon the criteria(ascending or descending which was set in the sort rule.)
(or)
view this thread
Re: Batch Search
Reg,
Deepak -
Treasury and risk Managament Configuration Guide
Hi Friends,
Can you please provide me the treasury and risk management config guide for the following :-
a. Foreign exchange forward cover
b. MTM Report Config
c. Financial Postings for the foward cover.
d. Swapping of forward cover.
Is treasury part of financial supply chain management, also let me know whether it is a SAP license product or part of normal standard product.
Please forward me the same to [email protected]
Thanks in advance.
DeepakHi deepak,
Check out these links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIARCR/FIARCR.pdf
Assign points if useful
Regards
genie -
XCM (extended configuration management) configuration guide
Hi All,
I have been working on PME (product modeling environment) and i require pricing information against the characteristics/variants created.For this i need to configure couple of parameters in XCM .I would be grateful if any of you guys can mail me XCM configuration guide to the following mail id <b>[email protected]</b>.
with regards,
ChaitanyaHello Friends,
Can you help me to resolve my WEB CATALOG Image issue in the following weblog.
WEBCATALOG not working in CRM
Your help in this regard shell be highly appriciated.
Please also sent me XCM Configuration Guide for CRM E Commerce if it is available.
Jaswant -
Configuration guide on Solution Manager Service Desk Scenario
Hi all,
I have just setup a Solution Manager 3.2 system and have followed the configuration guide, SP9.pdf which directs me to use SPRO to configure it. However, after going thru the SPRO, it doesn't gives me specific steps to setup the Service Desk scenarios. I could not find any specifc steps on creating a service Desk, business partners or configuration on the satelite system. Please kindly provide me with the relevant guide. Thanks in advance.Hi Guan,
I don't know if my message is being sent too late for you, but only now I read your question..
You have to go through Customer Relationship Management configuration in order to customize Service Desk and Change Request Management the way you need. Before, I believe you must have in your hands the specification of your Organizational Structure, who will be each business partner in your organization, with the correct responsibilities, then you draw the workflow you want to implement, which is the complete landscape, have your RFC connection to SAP working in order to send support messages to them (this should be ok if you already have SolMan working, it needs the RFC connection in order to update the services..). Once you define your processes, based on the ITIL, then you can start configuring your Service Desk. Inside the IMG of the SolMan->Service Desk you have the CRM steps you need (if you have SP09 or up), and the documentation inside the IMG are really useful. If you are not used to CRM, I suggest you take a look at the CRM Documentation, because most of the things are better explained there. Actions, Conditions for Actions, Business partners, Installed Base with default business partners, Solution Database..
You may be a little bit confused reading the lots of docs that SAP delivers about SolMan Service Desk regarding using SLF1 or SLFN transaction Type. SLF1 was the old one, used by SolMan 3.1, and it has some differences from SLFN. In fact, SLF1 is more complex. It has items, SLFN does not. It uses a Service Confirmation, SLFN does not.. and so on..
If you need more information, please let me know. I have been working with Service Desk and Change Request Management for one year, in Scandinavia, maybe we can exchange tips.
Best regards,
Raquel Cunha
São Paulo, Brazil -
In Solution Manager, where can I find the SRM 7.0 Configuration Guide?
Please give me directions on how to download the SRM 7.0 configuration guide within Solution Manager, these documents are not available on the service marketplace. We have sol manager 4 I believe, it's not sol manger 7.0.
Also, if you could send me the guide at matt.joseph at thq.com that would save me from losing more time trying to figure out Solution Manger
Thanks for your help.
MattMatt,
1. Log on to your SAP Solution Manager system.
2. To be able to access configuration documentation, create a project as follows:
1. Create your project with transaction SOLAR_PROJECT_ADMIN for project administration.
2. Connect your SAP system to SAP Solution Manager with transaction SMSY for the SAP Solution Manager system landscape.
3. Create a project structure and add the required scenarios for your SAP system to your project structure with the Business Blueprint transaction SOLAR01,
4. Add your SAP system configuration structures to your project structure with the configuration transaction SOLAR02.
3. Go to the project structure folder <project name> using transaction SOLAR02.
4. Access configuration documentation for SAP NetWeaver usage types at Configuration StructureSAP NetWeaver 7.0.
5. Access configuration documentation for all areas of SAP SRM at Configuration StructureSAP SRM <release>.
Nesimi -
Loyalty Management Best Practise Configuration Guide
Dear all,
we set up Loyalty Management in our Demo-System (CRM 7.0 Level5) as it is described in the SAP CRM Marketing book.
Unfortunately we still have problems with:
- sales order integration
- execution of membership activities
Does anybody has a Best Pracise Configuration Guide for Loyalty Management, I can use as an additional guide beneath the SAP Marketing book to solve these issues and to check all system settings and the customizing?Language German
English (Master)
Compare versions SSCR Download
In case, the page does not refresh automatically within 10 seconds
after finishing with correction activity,
please use the REFRESH button!
Refresh
Content: Summary | Header Data | Validity | Attachments
I know this is a late post but will help other users who search.
Note - 1331970.
Symptom
Loyalty functionality in sales order
Solution
Please read the documentation below Setup for Integration of Sales Order with Loyalty for CRM 7.0 You can use this note to integrate the loyalty application with sales order to allow customers to earn reward points on purchase of products, redeem points and buy point products. To enable the above-mentioned functionality, the following set up has to be carried out in the system: -> Product master data You have to add SetType REWARD_PRO_LOY (created for product type Material) to the product category. You may create a new product category for loyalty products. You can add the settype to a product category using the following steps: 1. Use transaction COMM_HIERARCHY
2. Search for the category to be used for loyalty products
3. In the SetTypes tab under Category Data, add REWARD_PRO_LOY as the settype After the settype is added to the loyalty product category, it will appear as point information assignment block in the product overview page. Here, you can maintain point information for Accrual, Redemption and Buy Points scenarios. You have to select the Scenario, Point Type (Points, Miles etc) and enter the associated number of points. The following three activities are supported: -> Accrual
In this scenario, a customer buys standard products and earns reward points for his purchase. The actual points to be accrued will be maintained at product master data level. You have to select EARN as the loyalty scenario. Example: We have a product, Laptop T 61, which has 1000 reward points associated with it, at the product master level. If a customer buys this product a member activity will be created and 1000 points will be credited to his account. Note: You can maintain points for a product with a particular loyalty scenario in the point information assignment block of product overview page. -> Redemption
In this scenario, a customer redeems his points to buy products. In CRM 7.0, redemption products have 100% discount and can be bought only by points. The point value of such products will be maintained at product master data level in point information assignment block. You have to select REDEEM as the loyalty scenario. Example: We have a keyboard HT-1010, which has a price of 5000 points (and 100% discount). If a customer buys this product, a member activity will be created and 5000 points will be deducted from the customer's account. -> Buy Points
This functionality enables a customer to purchase points. The point value of such products will be maintained at product master data level under the point Information assignment block. You have to select BUYPOINTS as the loyalty scenario. Note:
Point information is maintained for 1 base unit of product .If the quantity and unit of measure are changed, the points will be calculated accordingly.
-> Customizing in SPRO You have maintained the following customizing settings in SPRO:
-> In the customizing activity Define Point Types for Sales-Order Integration, you maintain point types. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management - Design Channel Integration Define Point Types for Sales-Order Integration Point Information in product master can be maintained only for these point types.
-> In the customizing activity Define Categories and Types for Sales Order Integration, you maintain member activity category, activity type, sales order status for which activity will be created and the processing delay ( Process On Hold) for a particular loyalty scenario. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management - Execution Member Activities Define Categories and Types for Sales Order Integration
-> In the customizing activity Define Transaction Types, you maintain the transaction types for accrual, redemption and buy points. For more information, see SAP Customizing Implementation guide Customer Relationship Management Transactions Basic Settings Define Transaction Types Note:
Reference transaction types LTAA, LTAR and LTAB are delivered for CRM IC and UIU. For web channel, transaction types ISLA, ISLR and ISLB are delivered. You can create new transaction types on project basis but transaction classification should be maintained as A, R and B for accrual, redemption and buy points transactions respectively. For redemption transaction LTAR, the item category is LTAR where the pricing process is maintained as 100% discount. Therefore, the net value will always be 0 for redemption items and only points will be charged. You have to maintain the condition 0R10 in pricing procedure. The pricing procedure 0CRM01 contains the details of condition 0R10. If you do not maintain 100% discount, then additional currency price will be displayed. For example, $200 + 100 MILES. Billing and delivery related customizing has to be done on a project basis. ----------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------- Setup for Integration of Sales Order with Loyalty in EhPx for CRM 7.0 You can use this note to integrate the loyalty application with sales order to allow customers to earn reward points on purchase of products, redeem points and buy point products. To enable the above-mentioned functionality, the following set up has to be carried out in the system: -> Product master data You have to add SetType REWARD_PRO_LOY (created for product type Material) to the product category. You may create a new product category for loyalty products. You can add the SetType to a product category using the following steps: 1. Use transaction COMM_HIERARCHY
2. Search for the category to be used for loyalty products
3. In the SetTypes tab under Category Data, add REWARD_PRO_LOY as the SetType After the SetType is added to the loyalty product category, it will appear as point information assignment block in the product overview page. Here, you can maintain point information for Accrual, Redemption and Buy Points scenarios. You have to select the Scenario, Point Type (Points, Miles etc) and enter the associated number of points. The following three activities are supported: -> Accrual
In this scenario, a customer buys standard products and earns reward points for his purchase. The actual points to be accrued will be maintained at product master data level. You have to select EARN as the loyalty scenario. Example: We have a product, Laptop T 61, which has 1000 reward points associated with it, at the product master level. If a customer buys this product a member activity will be created and 1000 points will be credited to his account. Note: You can maintain points for a product with a particular loyalty scenario in the point information assignment block of product overview page. This is an optional activity. In many cases, the points accrued will not be maintained in the product master data but will be determined based on reward rules. In such cases, you do not have to maintain the SetType. -> Buy Points
This functionality enables a customer to purchase points. The point value of such products will be maintained at product master data level under the point Information assignment block. You have to select BUYPOINTS as the loyalty scenario. This activity is mandatory for Buy Points scenario. -> Redemption
In this scenario, a customer redeems his points to buy products. In CRM 7.0, redemption products have 100% discount and can be bought only by points. The point value of such products will be maintained at product master data level in point information assignment block. You have to select REDEEM as the loyalty scenario. Example: We have a keyboard HT-1010, which has a price of 5000 points (and 100% discount). If a customer buys this product, a member activity will be created and 5000 points will be deducted from the customer's account. Note:
Point information is maintained for 1 base unit of product .If the quantity and unit of measure are changed, the points will be calculated accordingly. Redemption functionality in Ehp1 for CRM 7.0 In case of redemption, you have three payment options to choose from. You choose the payment option in the customizing activity Define Mixed Payment for Sales Order Integration. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management Channel Integration Define Mixed Payment for Sales Order Integration a) Fixed redemption value from Product Master
The point information will be picked from the SetType as explained above and 100% discount will be given at item category level. Attached is the screenshot of the same. Using Pricing Process, you can select whether normal pricing is executed or 100% discount is given. In addition to the above-mentioned setting, a 100% discount condition should be included in the pricing procedure. For this purpose, you can use the standard condition 0R10 in the pricing procedure. b) Mixed redemption using Conditions and IPC With Ehp1 for CRM 7.0, mixed payment functionality is available. This enables a consumer to pay with points and money in a single sales transaction. You can maintain point prices as conditions in product master data under the Prices assignment block. The condition type
0LM1 with condition tables SAP002, 003 and 004 are used to maintain these point conditions as seen in the screenshot below. Select the option '0LM1_LM_SAP002' from the dropdown. Select 0LM1_LM_SAP002 from the dropdown. In the above screenshot, Price in Points = 100% point price , Max Price in Points = maximum points a consumer can spend, Min Price in Points = minimum points a consumer should spend for this product. Note:
In the above scenario, entries in Point Information assignment block will not be considered for redemption but the information will be picked from the conditions. A new usage LM is developed for points as conditions. You can use the customizing activity Condition Technique: Basics to develop condition tables, access sequences, condition types and point procedures.
For more information, see SAP Customizing Implementation guide Customer Relationship Management Master Data Conditions and Condition Technique Condition Technique: Basics You can create condition objects with application CRM and usage LM. The point procedure 0LM001 is delivered and can be used in a sales transaction using the below the customizing Determine Point Procedures. Point information will be fetched by executing this procedure. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management Channel Integration Determine Point Procedures You can assign this point procedure to a particular sales org, distribution channel, division, customer pricing procedure and document pricing procedure the same way it is done with pricing procedure. If you decide to use only points in a sales transaction (consumer has to pay 100% point price always), a standard pricing procedure with 100% discount would suffice. If you want to allow mixed pricing, for example, a consumer can pay anything between 1000 to 2000 points and rest in currency, then condition type 2902 (point based discount) should be included in the pricing procedure and 100% discount should not be chosen at item category level as explained above. The conversion rate between points and currency can be maintained in CRM UI in the following manner:
1. Go to Loyalty Management
2. Select Prices
3. Choose 2900 as the Price Maintenance Group
Attached is the screenshot of the same. Here 1 USD is maintained as 1 point. Product specific conversion rates are also allowed. Condition type 2901 is the reference condition type for 2902 and 2903 (used in flexible order and is described later in the section flexible order). Scales can be maintained for the conversion rates. For example, for the first 1000 Points it is 0.5 USD per point. From 1000 to 2000 points, it is 0.75 USD per point and from 2000 points onwards, it is 1 USD per 1 Point Example of Sales order Here, a product TV-1000 is maintained with Point price as 1000 Miles and Min Point price as 500 miles and Max point as 1000 Miles. A consumer purchases this product using a redemption transaction and spends 500 points. With a conversion rate of 1 USD equal 1 point, the net value becomes 500 USD + 500 Miles. If consumer spends 1000 Miles, the net value will be 0 USD + 1000 miles. Similarly, various combinations of maximum price and minimum price can be maintained in Product master and accordingly consumer can use his points to redeem products. c) Mixed payment using Flexible order If you do not wish to maintain point prices for individual products due to high volume of products, specifically in retail, then they you select this option where during the checkout, consumer will be given the option to use his points. Discount will be given based on the points spent at an item level. In this case, the only thing you have to maintain is a fixed conversion rate (condition type 2901). The transaction type will be the same as accrual. For example, a consumer purchases a product HT-1000 on which he can earn 1000 special points. During checkout, he will be asked to use his points. Use Point Payment will be enabled, and he can enter points he wants to redeem. If he decides to use 500 points, then a discount will be given to him based on the points spent. Here, with a conversion rate of 1 USD equal to 1 point, 500 USD discount will be given and accrual information will be lost. Hence, the points spent will be equal to 500. Discount Based on Member Basic and Lifetime Tiers In accrual transactions, discounts can be given to members who have reached a particular tier (Basic and Lifetime tiers). This can be maintained as a condition using the following steps:
1. In CRM UI, go to Loyalty Management
2. Select Prices
3. Choose 29MD as the Price Maintenance Group
Here, we can maintain the percentage discount on a product for a particular basic and lifetime tier. The condition type 29MD should be included in the pricing procedure of sales transaction to provide discounts. In sales order processing, you can check the discount under the assignment block Price Totals on the overview page. In this case, a 2% discount is given based on the above condition as shown in the third row) Generation of Billing Documents Once a sales order is created and saved, you can generate a billing document as a follow up activity. For loyalty sales transactions, the following three new fields are added to the billing document.
-> Points
-> Point type
-> Points spent In Accrual and Buy Points scenarios, Points = Points accrued; Point type = Miles, points etc; Points spent = 0 In redemption scenarios, Points = Total point price; Point type = Miles, Points etc; Points spent = points spent by the consumer To generate billing document from a sales order, you have to select a relevant billing option for the item category. In this case, we have selected Transaction-Related Billing According to Order Quantity. The billing will happen via CRM Billing.
Note: Only CRM Billing is currently supported
As billing will happen only if the order is replicated successfully to ERP (where shipping, delivery and logistics will be done), you have to ensure that all the master data, for example, products, BP (sold to party), conditions, etc are present in ERP along with the transaction type and item category (for example, LTAA and LTAN). Once replication is complete, we can create a billing document from the sales order overview page. Select Create Follow-up and choose Billing. -> Customizing in SPRO You have maintained the following customizing settings in SPRO:
-> In the customizing activity Define Point Types for Sales-Order Integration, you maintain point types. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management Channel Integration Define Point Types for Sales-Order Integration Point Information in product master can be maintained only for these point types.
-> In the customizing activity Define Categories and Types for Sales Order Integration, you maintain member activity category, activity type, sales order status for which activity will be created and the processing delay (Process On Hold) for a particular loyalty scenario. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management Member Activities Define Categories and Types for Sales Order Integration
-> In the customizing activity Define Transaction Types, you maintain the transaction types for accrual, redemption and buy points. For more information, see SAP Customizing Implementation guide Customer Relationship Management Transactions Basic Settings Define Transaction Types
Note:
Reference transaction types LTAA, LTAR and LTAB are delivered for CRM IC and UIU. For web channel, transaction types ISLA, ISLR and ISLB are delivered. You can create new transaction types on project basis but transaction classification should be maintained as A, R and B for accrual, redemption and buy points transactions respectively. For redemption transaction LTAR, the item category is LTAR where the pricing process is maintained as 100% discount. Therefore, the net value will always be 0 for redemption items and only points will be charged. You have to maintain the condition 0R10 in pricing procedure. The pricing procedure 0CRM01 contains the details of condition 0R10. If you do not maintain 100% discount, then additional currency price will be displayed. For example, $200 + 100 MILES. Billing and delivery related customizing has to be done on a project basis. -> In the customizing activity Assign Product Hierarchy for Sales Order Integration, you register the product hierarchy if it is not the same as sales operation hierarchy. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management Channel Integration Assign Product Hierarchy for Sales Order Integration This customizing will help you create reward rules based on product categories and process them during creation of member activity using sales order. -> In the customizing activity Determine Pricing Procedure, you maintain 29CRLM as the pricing procedure for loyalty transactions. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Business Functions Pricing Pricing in the Business Transaction Determine Pricing Procedure For more information please refer to the attachment and IMG Documentation. -
Configuration of Organization Management
Dear all,
I have to configured Organization management with start. Can you please mentioned the steps involved in configuration of OM.
Thanks.
Regards,
HassanHi,
OM config starts with defining number ranges and before that create a plan version.
number ranges you can define for all the om objects like S P O C K.
remaining all you can start with builiding block ( meaning creating org structure).
there are different interfaces to create the same...
let us know any other question if you have.
good luck
cheers -
Where can i find the configuration guide for a solution manager beginner
dear all:
as the title,expect your reply.
thanks!Hi Zuiyong,
the configuration guide of SAP Solution Manager contains only same general information like strategy, required SPs in sat. systems, authorization and notes.
The 'REAL' configuration guide can will find in the system in the transaction SPRO->Referenz.IMG ->Solution Manager->Solution Manager-> Basic Settings. These settings you have to make to use standard SAP Solution Manager. In the are enhanced settings you can find additional settings for additional features.
Regards,
Udo Lang -
Configuration Guide for Time Management
Can anyone send me the configuration guide for Time Management
The following is the config. document of TM. check the threads u will get some more good responses and close the thread if u find the response is good enough
I think its helpful to u.
IMG  Personnel Time Management  Work Schedules  Define Public Holiday Classes
IMG  Personnel Time Management  Work Schedules  Personnel Subarea Groupings  Group Personnel Subareas for the Work Schedule
IMG  Personnel Time Management  Work Schedules  Personnel Subarea Groupings  Group Personnel Subareas for theDaily Work Schedule
IMG  Personnel Time Management  Work Schedules  Daily Work Schedules  Define Daily Work Schedules
IMG  Personnel Time Management  Work Schedules  Period Work Schedules  Define Period Work Schedules.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Day Types.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Day Types.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Special Days.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Define Employee Subgroup Groupings
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Define Groupings for the Public Holiday Calendar.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Set Work Schedule Rules and Work Schedules.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Generate Work Schedules Manually
IMG  Personnel Time Management  Work Schedules  Planned Working Time  Set Default Value for the Work Schedule.
IMG  Personnel Time Management  Work Schedules  Planned Working Time  Set Default Value for Time Management Status.
IMG  Personnel Time Management  Time Data Recording and Administration  Substitutions  Define Personnel Subareas for Substitution Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Substitutions  Set Defaults for Substitution Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Group Personnel Subareas for Attendances and Absences.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Define Absence Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Define Counting Classes for the Period Work Schedule.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Group Employee Subgroups for Time Quotas.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Group Personnel Subareas for Time Quotas
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Rules for Rounding Counted Absences
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Counting Rules
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Counting Rules  Deduction rules for Absence quotas
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Assign Counting Rules to Absence Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Attendances/Actual Working Times  Define Attendance Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Attendances/Actual Working Times  Attendance counting  Rules for Attendance counting (New)  Assign Counting Rules to Attendance Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Time Quota Types  Define Absence Quota Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Automatic Accrual of Absence Quotas  Permit Quota Generation Without Time Evaluation.
IMG  Personnel Time Management  Time Evaluation  Time Evaluation Settings  Set Personnel Subarea Groupings for Time Recording.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Set Base Entitlements  Base Entitlement for Absence Quota Generation.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Determine Validity and Deduction Periods.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Set Base Entitlements  Define Generation Rules for Quota Selection.
Edited by: Sikindar on Feb 11, 2008 6:05 PM -
Configuration Guide in SAP Solution Manager
Hi all,
I'm reading documentation on a CRM scenario (Investigative Case Management : ICM). It says that the ICM configuration guide is assigned to the scenario 'Criminal Investigation Processing' (Public Security) in the SAP Solution Manager.
I don't have access to the SAP Solution Manager but wanted to know if I could find this ICM configuration guide somewhere on the SAP Market Place.
Alternatively, if I could access a SAP solution Manager system, how could I access this ICM configuration guide?
Thanks a lot in advance
Best regards
StephanieHi
this will solve ur prob
https://websmp210.sap-ag.de/~sapdownload/011000358700000478762009E/HowToCreateConfGuide.pdf
Regards
Prakhar -
Configuration Guide Job Scheduling Management with SAP Solution Manager
Dear Gurus
Could you please help me with the configuration guide of the Job Scheduling Management with SAP Solution Manager
Best RegardsHello Luis,
the configuration activities can be accessed via the "Implementatiopn Guide" by calling transaction SPRO in your SAP Solution Manager system.
In SPRO navigate to -> SAP Solution Manager -> Scenario-Specific Settings -> Job Scheduling Management -> Standard Configuration and execute the following two activities.
1. Activate Solution Manager Services
2. Set Up Work Center for Job Scheduling Management
Make sure that your user has role SAP_SM_SCHEDULER_EXE (or_ADMIN) assigned.
Afterwards you should be able to access the Job Management Work Center and to create Job Documentation or to import Jobs from a Managed System into new Job Documentations.
The following SAP notes might be usefuly as well:
1054005 - FAQ on Job Scheduling Management
1117355 - Work Center roles
Kind regards,
Martin
http://service.sap.com/jsm
Maybe you are looking for
-
How to read Production Order Long Text data in ABAP program
Hi friends, I have the issue in reading the ' Long Text ' tab view data of production order in CO03 transaction.Please can some body help me out to get this in ABAP program. Regards, Rajesh Akarte
-
In the process of creating an itunes account, it will not let me select None for payment option? How do I proceed without a credit card?
-
My Iphone4 is a wreck. I have a one year old son who constantly takes my iphone. Put it this way, my iphone has fell a couple times and its cracked but still was functioning fine. Been able to run all my apps go on instagram take pictures, all of tha
-
AppleTV + NAS = :-(
Bought a DLINK DNS-323 NAS storage device (which claims to have a built-in iTunes & UPnP AV Server). AppleTV does not recognize the device on the network and it cannot be paired with AppleTV. (Just thoought I'd put that out there for the Google searc
-
Hi. I am using Encore CS4 on Windows 7, AMD Athlon Dual Core 64 2.31 GHz, 5 GB DDR2 667 RAM. Working on a HD video project, I have a main menu and 4 sub-menus, 56 short time lines, about 1 or 2 minutes each one. When I check for errors, everything