Organizational Management- Maintain Number Ranges
Hi All
In menu path :
Personnel Management -> Organizational Management -> Basic Settings -> Maintain Number Ranges -> Maintain Number Ranges
I have maintained the number ranges as mentioned below
Job(C) 10000 to 20000,
Position (S) 20001 to 30000,
Org Unit (O) 30001 to 40000 .
After maintaining i have saved in a Transport Request .
Now am importing it in to the Quality . In Quality i am getting only the Objects Job , Position , Org Unit but the number ranges
maintained above is not imported .
Kindly let me know what is the problem .
Pls send me the solution how to transport the number Ranges .
I would appreciate for an earliest response .
Thanks in Advance
Hi,
Please check below SAP wiki link which will guide you and show different settings that may be required to accomplish along with issues you may face.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64259392
Thanks,
Ameet
Similar Messages
-
Organizational units and number range
Hi
how to maintain number ranges for organizationl units.. can someone explain?IMG>Personnel Management>Organizational Management-->Basic Settings>Maintain Number Ranges
~Suresh -
Maintain number range interval "" for inventory document --help!
Dear all,
I running the FM - L_INV_DOC_CREATE for creating the physical inventory doc for WM ( warehose management ) level. But i get this error -> Maintain number range interval "" for inventory document. If i try to create it using the t-code LI01N,everything goes smoothly. Anybody haf any idea how to solve this? thank you.1.Did u go into Number ranges for WM?
Yes
2.Did u click on assignment & number ranges not on Number range intervals
Yes
3.Di du cahnge it to 02 for all?.
Yes on first warehouse 111 all changed to 02 and on warehouse G02 just on TR and TO changed to 02
4.Did u select NR intervals? and give the number range?
Yes
5.Did u transport the intervals?
No, as I am working on DEV practice client. Dont need to transport.
6.Did assign the number rabges to ur Warehouse?
I assigned No. 2 to warehouse, not number range, can u ellaborate more on number range assignment.
I created migo for same material with different storage location and material and accounting documents are created. Even the number ranges are working on another warehouse created by colleague, but its not working on my warehouse and as mentioned earlier this is Dev practice client. No need to transport. -
Maintain number range object for excise grp
Hi Gurus,
During stock transfer, while doing Goods receipt I am getting the below error
"Maintain number range object for object J_1IRG23D, year 2010, excise group"
Could anyone please tell me the trans code for maintaining no range for excise group...
Thanks,
RajaGo to J1I9 T Code for a particular object object J_1IRG23D, execute and then give the excise group and maintain the number series.
Regards,
Nagesh
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM -
Maintain number range interval 01 for posting change notices
Hi,
I am doing transfer posting using movement type 321 (quality to unrestricted) for one material.While posting i am getting error"Maintain number range interval 01 for posting change notices" Message no. L0015
WM is active for this material and doing this movement for one plant which is newly created in system.Wil you please advice for which document type i had to maintain number range.Please inform SPRO path / Transaction to be used to make required changes.
Thanks & Regards
AtharvaMaintain number range for posting change in tcode OMLW
-
Re : Maintain number range interval "" for quants
Hi
While doing the transfer order i am getting the following error.
" Maintain number range interval "" for quants "
How to solve this.
Thanks
Antodear sir
go to Tcode : OMLW click for quants tab, give your warehouse number and maintain the number ranges, for your warehouse.
Regards
jrp -
Re : Maintain number range interval "1" for quants
Hi
While creating transfer order the following error is coming.
" Maintain number range interval "1" for quants "
How to solve this.
Thanks
ManiDear,
Enter t-code OMLW.
Click on tab of For Quant.
Then maintain number range.
Regards,
Mahesh Wagh -
Maintain number range interval "01" for inventory documents
hi,
when i am creating a physical inventory creating document t.code LI01 i got this eror:
Maintain number range interval "01" for inventory documents.where i have to maintain please reply me.
naveenhi,
spro->log.execution>warehouse mgmt->activities->physical inventory---->maintain number ranges.
Regards,
velu -
Hello Friends,
When I am doing a Goods Receipt, system is giving the message " Maintain number range object for object J_1IRG23A1, year 2008, excise group 50". What to do for this. Please tell me.
Regards,
nrHai
Thank you very much, it is working , I have saved GR, but now when I go to GR display option, it is saying "document 5..... does not exist in calender year 2008", but if I go to MB03 it is displaying the document, after MB03, if I go to MIGO display, it will display the document. Why it is not displaying for the first time ?
Thanks
nr -
Maintain number range object for object J_1IRG23C1, year 2008, excise
Dear All,
I am doing the purchase cycle for Assets, while doing GR i am getting the below error, pls guide me
Maintain number range object for object J_1IRG23C1, year 2008, excise
Maintain number range object for object J_1IRG23C2, year 2008, excise
B/regds,
CBDear CB,
Use Transaction "SNUM", and give the object name as "J_1IRG23C1" and maintain number range for the financial year.
Do the same procedure for Object "J_1IRG23C2" and maintain the number range.
Hope this helps.
Njoy SAP
-Saravanaganesh -
Maintain number range object for object J_1IINTNUM
Dear,
While doing GRN i am getting this error:
Maintain number range object for object J_1IINTNUM, year 2009, excise group
Maintain number range object for object J_1IRG23A1, year 2009, excise group E1
Maintain number range object for object J_1IRG23A2, year 2009, excise group E1
What i did is:
1) I maintained NR for Objects J_1IINTNUM, J_1IRG23A1,J_1IRG23A2 in J1I9 Tcode.
Still i am getting the same error in MIGO.
Regards
Utsav
Edited by: Utsav.agra on Nov 18, 2009 12:24 PMDear Pankaj,
thanks actually i wans maintaining number as 1 instead of 01.
Thanks
Utsav -
Maintain number range object for object J_1IINTNUM, year 2009, excise group
Hi SAP Guru !
Plz tell me the solutions quickly, Even after mantaining the required Objects in "J1I9" , when I am going to post GR , once again it is saying that ........
1 - > Maintain number range object for object J_1IINTNUM, year 2009, excise group
Message no. "4F159" .
2 - > Maintain number range object for object J_1IRG23A1, year 2009, excise group 21
Message no. 4F159
3 - > Maintain number range object for object J_1IRG23A2, year 2009, excise group 21
Message no. 4F159
Regards,
Sandear sir
while maintain number range , in the number column, it should be 01. other than 01, you will get same error.
so please check it should be 01 in the number column and year and number range interval .
regards
jrp -
Maintain number range object for object J_1IRG23A1, year 2007, excise
Hi All,
I have configured CIN in ECC 5.0. When i am doing MIGO getting errror that "Maintain number range object for object J_1IRG23A1, year 2007, " and
Maintain number range object for object J_1IRG23A2, year 2007, excise group 10
but i have already maintained number range for such object.
please guide me.
Regards,
RavindraHi,
Which Number u given,
No year From number to number
01 2007 1 10000
I think u allready given,this is for checking.
Raghu -
Funds Management Budget number range
Hi,
Hi when I update budget through tcode FMBBC system generated document number sequesntially. But in "Maintain Number Range Interval for Budget Change Documents" current status shows different numbers.
EG. document numbers FMBBC - 10000020.
But number range status shows current document 10000029.
When I post 10000021 document , current status does not get updated. But when I post more documents and document generated number comes to 10000030 then current status shows 10000039.
Suggest.Hi, it's range for Line items, and 'number range interval for budget entry documents' for header
-
Maintain number range interval for master data upload for existing employee
Hi Experts,
1)I have the scenario to upload additional data for existing employees in PA. Employees are already existed in SAP HR , But additional Infotypes are required to maintain for those emploees
2) I have the senario where i have to upload master data for new employees.
Pls give the detailed description of how to maintain number range interval i.e. External or Internal for upload in both the above scenario. Do we have to maintain number range manually in master data record & then upload it Through BDC or LSMW?
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Edited by: Rob Burbank on Jan 12, 2011 3:49 PM>
s c patil wrote:
> 2) For new employees i have to maintain desired ( my or client?) number range in SAP system as External number range & then default that number range in NUMKAR & then maintain those number range in master data record & then get the data template filled by client & then upload the data & after that create new number range which is next to existing External number range as an Internal number range. & then default that Internal number range.
>
> Pls reply ASAP
Yes Mr. Patil...
For existing employees
you need to execute HIRING ACTION Through BDC with External number range. While recording you have to use atleast three infotype i.e. IT0000,IT0001,IT0002. In addition you can upload other infotype through PA30.
For new employees
While configuration you can create another number range as internal for new hiring. and use NUMKR feature as well.
Here I don't understand that why r u looking for upload process for new hiring, if it is not mass hiring. It should be day to day activities which would be done by user through PA40.
Best Regards,
Anand Singh
Maybe you are looking for
-
How they can say it's fine when there are so many problems?
I've had my Macbook barely a month, but I've taken it to the store twice for diagnostics, called Apple.com 3 times, erased and reloaded everything, and still have numerous issues despite being told 'it all checks out' and a 'replacement is not indica
-
Kernal Panic, Finder Crashing, Overall poor Performance
I've had the Finder crash a ton lately. I've done an erase and install, no change. Got a Kernal Panic 2 days after the erase and install while installing Logic Pro. Talked to a Genius, could be hard drive, ram, Logic Board. I have a Console log from
-
I've got the ATV plugged into my amp and I get audio, but no pix. Does Panasonic not support ATV2? Is it the output 3D HDMI cable from the amp to the TV?
-
How do I bind variables in a List of value
I'm using jdev 11g. I have an updatable view object for which I want to use a list of values on a few fields. I have defined a read-only view object that query a table that contains several list of values based on a column call domain. How do I narro
-
Running out of memory despite having set je.maxMemory to a moderate value
I have set je.maxMemory to 20MB (je.maxMemory=20000000) and allowed a max heap size of 512MB (-Xms256M -Xmx512M). After two hours of running my web service, I'm running out of memory. After having profiled my service (using Yourkit Java Profiler 1.10